Web Services Addressing 1.0 - SOAP Binding

1.1 Notational Conventions

The keywords "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in RFC 2119 [IETF RFC 2119].

When describing abstract data models, this specification uses the notational convention used by XML Infoset [XML Information Set]. Specifically, abstract property names always appear in square brackets (e.g., [some property]).

When describing concrete XML schemas [XML Schema Structures, XML Schema Datatypes], this specification uses the notational convention of WS-Security [WS-Security]. Specifically, each member of an element's [children] or [attributes] property is described using an XPath-like notation (e.g., /x:MyHeader/x:SomeProperty/@value1). The use of {any} indicates the presence of an element wildcard (<xs:any/>). The use of @{any} indicates the presence of an attribute wildcard (<xs:anyAttribute/>).

1.2 Namespaces

This specification uses a number of namespace prefixes throughout; they are listed in Table 1-1. Note that the choice of any namespace prefix is arbitrary and not semantically significant (see [XML Namespaces]).

WS-Addressing is defined in terms of the XML Information Set [XML Information Set]. WS-Addressing is conformant to the SOAP 1.2 [SOAP 1.2 Messaging Framework] processing model and is also compatible with SOAP 1.1[SOAP 1.1] for backwards compatibility. WS-Addressing may be used with WSDL [WSDL 2.0 Core Language] described services as described in Web Services Addressing 1.0 - WSDL Binding[WS-Addressing WSDL Binding]. The examples in this specification use an XML 1.0 [XML 1.0] representation but this is not a requirement.

All information items defined by this specification are identified by the XML namespace URI [XML Namespaces] http://www.w3.org/2005/08/addressing. A normative XML Schema [XML Schema Structures, XML Schema Datatypes] document can be obtained by dereferencing the XML namespace URI.

2.1 Feature Name

The SOAP 1.2 Addressing 1.0 Feature is named using the following URI:

• http://www.w3.org/2005/08/addressing/feature

2.2 Description

The SOAP 1.2 Addressing 1.0 Feature provides a SOAP-specific expression of the abstract message addressing properties defined by Web Services Addressing 1.0 - Core[WS-Addressing Core].

This feature may be used with any SOAP MEP. A binding that supports this feature MUST provide a means to transmit the properties listed below with a message and to reconstitute their values on receipt of a message.

2.3 Properties

The SOAP 1.2 Addressing 1.0 Feature defines the following properties:

http://www.w3.org/2005/08/addressing/feature/Destination

Corresponds to the abstract [destination] property.

http://www.w3.org/2005/08/addressing/feature/SourceEndpoint

Corresponds to the abstract [source endpoint] property.

http://www.w3.org/2005/08/addressing/feature/ReplyEndpoint

Corresponds to the abstract [reply endpoint] property.

http://www.w3.org/2005/08/addressing/feature/FaultEndpoint

Corresponds to the abstract [fault endpoint] property.

http://www.w3.org/2005/08/addressing/feature/Action

Corresponds to the abstract [action] property.

http://www.w3.org/2005/08/addressing/feature/MessageID

Corresponds to the abstract [message id] property.

http://www.w3.org/2005/08/addressing/feature/Relationship

Corresponds to the abstract [relationship] property.

http://www.w3.org/2005/08/addressing/feature/ReferenceParameters

Corresponds to the abstract [reference parameters] property.

2.4 Interactions with Other SOAP Features

If the http://www.w3.org/2003/05/soap/features/action/Action property of the SOAP Action feature[SOAP 1.2 Adjuncts] has a value, then the value of the http://www.w3.org/2005/08/addressing/feature/Action property of the SOAP 1.2 Addressing 1.0 feature MUST be identical to it. Failure to have an identical value results in an Invalid Addressing Header fault (see 6.4.1 Invalid Addressing Header).

3.1 Module Name

The SOAP 1.2 Addressing 1.0 Module is identified using the following URI:

• http://www.w3.org/2005/08/addressing/module

3.2 Description

The SOAP 1.2 Addressing 1.0 Feature (see 2. SOAP 1.2 Addressing 1.0 Feature) defines a set of SOAP properties and their correspondence to the abstract message addressing properties defined by Web Services Addressing 1.0 - Core[WS-Addressing Core]. The SOAP 1.2 Addressing 1.0 Module defines SOAP headers corresponding to the XML Infoset representation of the abstract message addressing properties defined in Web Services Addressing 1.0 - Core.

3.3 Additional Infoset Items

The SOAP 1.2 Addressing 1.0 Module defines the following additional XML Infoset items:

/[reference parameters]/@wsa:IsReferenceParameter

This REQUIRED attribute (of type xs:boolean) signifies whether the message addressing header is a reference parameter, see section 3.4 Binding Message Addressing Properties for more details on its use.

3.4 Binding Message Addressing Properties

When a message is to be addressed to an endpoint, the XML Infoset representation of each message addressing property that has been assigned a value is inserted into the message as a SOAP header block subject to the following additional constraints:

• The value, if any, of the [reference parameters] property is added to the SOAP message header: the element information item of each of the [reference parameters] (including all of its [children], [attributes] and [in-scope namespaces]) is added as a SOAP header block in the new message.

  Note:

  The insertion of SOAP headers into a message implies particular semantics. Since the reference parameter mechanism does not restrict the content of the generated headers, EPR suppliers should exercise appropriate caution to ensure their reference parameters do not cause unintended or erroneous semantics in the resultant SOAP message. For example, using a reference parameter to send a WS-Security[WS-Security] header would be ill-advised (since other parts of the SOAP infrastructure will often control this header, and there must be at most one of them per message).

• Each header block added as a result of the above rule is annotated with a wsa:IsReferenceParameter attribute (see 3.3 Additional Infoset Items) whose value is a valid xs:boolean representation of "true". Any existing wsa:IsReferenceParameter attribute on the header block is replaced.

  Note:

  Integrity validation of [reference parameters] needs to take into account the addition of wsa:IsReferenceParameter attributes and the corresponding introduction of the WS-Addressing namespace to the [in-scope namespaces]

• The value of each message addressing property that is of type IRI MUST be serialized as an absolute IRI in the corresponding SOAP header block. No additional %-escaping is performed.

• Each optional element or attribute that has a value equal to the defined default value for that element or attribute MAY be omitted.

The following example shows how the SOAP 1.2 Addressing 1.0 Module is used to construct a message addressed to the endpoint:

<wsa:EndpointReference
     xmlns:wsa="http://www.w3.org/2005/08/addressing"
     xmlns:wsaw="http://www.w3.org/2006/02/addressing/wsdl"
     xmlns:fabrikam="http://example.com/fabrikam"
     xmlns:wsdli="http://www.w3.org/2006/01/wsdl-instance"
     wsdli:wsdlLocation="http://example.com/fabrikam
       http://example.com/fabrikam/fabrikam.wsdl">
   <wsa:Address>http://example.com/fabrikam/acct</wsa:Address>
   <wsa:Metadata>
       <wsaw:InterfaceName>fabrikam:Inventory</wsaw:InterfaceName>
   </wsa:Metadata>
   <wsa:ReferenceParameters>
       <fabrikam:CustomerKey>123456789</fabrikam:CustomerKey>
       <fabrikam:ShoppingCart>ABCDEFG</fabrikam:ShoppingCart>
   </wsa:ReferenceParameters>
</wsa:EndpointReference>

The address value is copied in the "To" header block and the "CustomerKey" and "ShoppingCart" elements are copied literally as a header blocks in a SOAP message addressed to this endpoint. The resulting SOAP message would look as follows:

<S:Envelope xmlns:S="http://www.w3.org/2003/05/soap-envelope"
         xmlns:wsa="http://www.w3.org/2005/08/addressing"
         xmlns:fabrikam="http://example.com/fabrikam">
   <S:Header>
     ...
    <wsa:To>http://example.com/fabrikam/acct</wsa:To>
    <wsa:Action>...</wsa:Action>
    <fabrikam:CustomerKey wsa:IsReferenceParameter='true'>123456789</fabrikam:CustomerKey>
    <fabrikam:ShoppingCart wsa:IsReferenceParameter='true'>ABCDEFG</fabrikam:ShoppingCart>
     ...
   </S:Header>
   <S:Body>
     ...
   </S:Body>
</S:Envelope>

3.5 Relationship between SOAP Headers and transport-level properties

Some underlying protocols may support native properties similar to the Message Addressing Properties. For example, the reply-to: email header is similar to the [reply endpoint] Message Addressing Property. Authors and implementors of bindings should not assume any particular correspondence between native properties and Message Addressing Properties. For example, if an email message represents only one hop in a multi-hop path, then the reply-to: header is likely to differ from the [reply endpoint] address.

4.1 Extension Name

The SOAP 1.1 Addressing 1.0 Extension is identified using the following URI:

• http://www.w3.org/2005/08/addressing/module

4.2 Description

The SOAP 1.2 Addressing 1.0 Feature (see 2. SOAP 1.2 Addressing 1.0 Feature) defines a set of SOAP properties and their correspondence to the abstract message addressing properties defined by Web Services Addressing 1.0 - Core[WS-Addressing Core]. The SOAP 1.1 Addressing 1.0 Extension uses the XML Infoset representation of the abstract message addressing properties defined in Web Services Addressing 1.0 - Core and binds each element information item to a SOAP header block. The SOAP 1.1 Addressing 1.0 Extension operates as described in 3. SOAP 1.2 Addressing 1.0 Module with the following exceptions:

SOAP Action

Use of the SOAPAction HTTP request header field is required when using the SOAP 1.1 HTTP binding. The field-value of the SOAPAction HTTP request header MUST either be the value of the [action] property enclosed in quotation marks, or the empty value "". The latter case supports the ability to obscure the [action] property through SOAP-level security mechanisms, without requiring otherwise unnecessary transport-level security. Any other value for SOAPAction results in an Invalid Message Addressing Property fault (see 6.4.1 Invalid Addressing Header).

5.1 Use of Anonymous Address in SOAP Response Endpoints

A value of "http://www.w3.org/2005/08/addressing/anonymous" for the [destination] property implies no additional semantics beyond those resulting from the rules defined below and as described in Web Services Addressing 1.0 - Core[WS-Addressing Core]. In particular, note that Web Services Addressing 1.0 - Core[WS-Addressing Core], section 3.4 requires such a value in messages sent to a response endpoint whose [address] is "http://www.w3.org/2005/08/addressing/anonymous".

5.2 Use of Non-Anonymous Addresses in SOAP Response Endpoints

6.1 SOAP 1.2 Fault Binding

The fault properties bind to a SOAP 1.2 fault as follows:

[Code]

The value of the [Code] property is bound as the value of the SOAP faults S:Fault/S:Code/S:Value element information item.

[Subcode]

The value of the [Subcode] property is bound as the value of the SOAP faults S:Fault/S:Code/S:Subcode/S:Value element information item.

[Subsubcode]

The value of the [Subsubcode] property is bound as the value of the SOAP faults S:Fault/S:Code/S:Subcode/S:/Subcode/S:Value element information item.

[Reason]

The value of the [Reason] property is bound as the value of the SOAP faults S:Fault/S:Reason/S:Text element information item.

[Details]

The value of the [Details] property is bound as child elements of the SOAP faults S:Fault/S:Detail element information item.

<S:Envelope>
  <S:Header>
    <wsa:Action>http://www.w3.org/2005/08/addressing/fault</wsa:Action>
    <!-- Headers elided for brevity.  -->
  </S:Header>
  <S:Body>
    <S:Fault>
      <S:Code>
        <S:Value>[Code]</S:Value>
        <S:Subcode>
          <S:Value>[Subcode]</S:Value>
          <S:Subcode>
            <S:Value>[Subsubcode]</S:Value>
          </S:Subcode>
        </S:Subcode>
      </S:Code>
      <S:Reason>
        <S:Text xml:lang="en">[Reason]</S:Text>
      </S:Reason>
      <S:Detail>
        [Detail]
      </S:Detail>   
    </S:Fault>
  </S:Body>
</S:Envelope>
      

6.2 SOAP 1.1 Fault Binding

The SOAP 1.1 fault is slightly less expressive than the SOAP 1.2 fault and maps only [Subcode], [Reason] and [Detail]. These the properties bind to a SOAP 1.1 fault as follows:

[Subcode] or [Subsubcode]

The value of the [Subsubcode] or, if that is not specified, the value of the [Subcode] property is bound as the value of the SOAP faults S11:Fault/faultcode element.

[Reason]

The value of the [Reason] property is bound as the value of the SOAP faults S11:Fault/faultstring element.

[Details]

The SOAP 1.1 fault detail is only for use with faults related to the body of a message and is therefore not used for SOAP 1.1 faults related to processing of addressing headers. Instead the value of the [Details] property is bound as the value of a new wsa:FaultDetail SOAP header block. The following describes the wsa:FaultDetail element:

/wsa:FaultDetail

Zero or more of the elements defined in 6.3 Fault Detail Elements.

/wsa:FaultDetail/@{any}

Optional extensibility attributes including SOAP role and mustUnderstand.

<S11:Envelope>
  <S11:Header>
    <wsa:Action>http://www.w3.org/2005/08/addressing/fault</wsa:Action>
    <wsa:FaultDetail>[Details]</wsa:FaultDetail>
    <!-- Other headers elided for brevity.  -->
  </S11:Header>
  <S11:Body>
    <S11:Fault>
      <faultcode>[Subcode] or [Subsubcode]</faultcode>
      <faultstring xml:lang="en">[Reason]</faultstring>
    </S11:Fault>
  </S11:Body>
</S11:Envelope>
      

6.3 Fault Detail Elements

The following subsections define a set of elements used to convey additional information in the faults described in 6.4 Predefined Faults.

6.4 Predefined Faults

7.1 Establishing EPR Trust

There are many mechanisms that could be used to supply proof that a message sender has authority to represent the [address] of EPRs supplied within the message. Typically such mechanisms require the inclusion of a WS-Security[WS-Security] header that contains XML digital signatures binding the wsa:ReplyTo and wsa:FaultTo elements to the SOAP message using a security token issued by an authority trusted by the receiver of the message for the domain of the [address] of the EPR. Possession of a security token issued by a trusted authority for the domain of the [address] of the EPR provides a level of confidence that the message sender has authority to represent the [address].

For example, a message could include a WS-Security[WS-Security] header that contains XML digital signatures binding the wsa:ReplyTo and wsa:FaultTo elements to the SOAP message using an X.509 certificate for the domain addressed by the [address] of the EPR. If the certificate is issued by a certificate authority trusted by the receiver of the message then the receiver can have some level of confidence that the message sender has authority to represent the [address] of the EPR.

7.2 Additional Security Considerations

The wsa:isReferenceParameter attribute is only meaningful on SOAP headers. Message processors should consider its appearance elsewhere in a SOAP message as a possible attack.

Message processors should consider elements from the soap11, soap12 and wsa namespaces appearing as reference parameters in an EPR as a possible attack.

There are known XML ID and re-structuring attacks which should be considered by message processors, see [WS-Security] - Security Considerations: Removal and modification of XML elements.

7.3 Additional Considerations for SOAP Intermediaries

To avoid breaking signatures, intermediaries MUST NOT change the XML representation of WS-Addressing headers when relaying those headers. Specifically, intermediaries MUST NOT remove XML content that explicitly indicates otherwise-implied content, and intermediaries MUST NOT insert XML content to make implied values explicit. For instance, if a RelationshipType attribute is present with a value of "http://www.w3.org/2005/08/addressing/reply", an intermediary MUST NOT remove it; similarly, if there is no RelationshipType attribute, an intermediary MUST NOT add one.

9.1 Normative References

[IETF RFC 2119]

Key words for use in RFCs to Indicate Requirement Levels, S. Bradner, Author. Internet Engineering Task Force, June 1999. Available at http://www.ietf.org/rfc/rfc2119.txt.

[IETF RFC 3987]

Internationalized Resource Identifiers (IRIs) M. Duerst, and M. Suignard, Authors. Internet Engineering Task Force, January 2005. Available at http://www.ietf.org/rfc/rfc3987.txt.

[SOAP 1.1]

Simple Object Access Protocol (SOAP) 1.1, D. Box, et al, Editors. World Wide Web Consortium, 8 May 2000. Available at http://www.w3.org/TR/2000/NOTE-SOAP-20000508/.

[SOAP 1.2 Messaging Framework]

SOAP Version 1.2 Part 1: Messaging Framework, M. Gudgin, M. Hadley, N. Mendelsohn, J-J. Moreau, H. Frystyk Nielsen, Editors. World Wide Web Consortium, 24 June 2003. This version of the SOAP Version 1.2 Part 1: Messaging Framework Recommendation is http://www.w3.org/TR/2003/REC-soap12-part1-20030624/. The latest version of SOAP Version 1.2 Part 1: Messaging Framework is available at http://www.w3.org/TR/soap12-part1/.

[SOAP 1.2 Adjuncts]

SOAP Version 1.2 Part 2: Adjuncts, M. Gudgin, M. Hadley, N. Mendelsohn, J-J. Moreau, H. Frystyk Nielsen, Editors. World Wide Web Consortium, 24 June 2003. This version of the SOAP Version 1.2 Part 2: Adjuncts Recommendation is http://www.w3.org/TR/2003/REC-soap12-part2-20030624/. The latest version of SOAP Version 1.2 Part 2: Adjuncts is available at http://www.w3.org/TR/soap12-part2/.

[WS-Addressing Core]

Web Services Addressing 1.0 - Core, M. Gudgin, M. Hadley, and T. Rogers, Editors. World Wide Web Consortium, 9 May 2006. This version of the WS-Addressing Core Recommendation is http://www.w3.org/TR/2006/REC-ws-addr-core-20060509. The latest version of WS-Addressing Core is available at http://www.w3.org/TR/ws-addr-core.

[XML 1.0]

Extensible Markup Language (XML) 1.0 (Third Edition), T. Bray, J. Paoli, C. M. Sperberg-McQueen, and E. Maler, Editors. World Wide Web Consortium, 4 February 2004. This version of the XML 1.0 Recommendation is http://www.w3.org/TR/2004/REC-xml-20040204. The latest version of XML 1.0 is available at http://www.w3.org/TR/REC-xml.

[XML Namespaces]

Namespaces in XML, T. Bray, D. Hollander, and A. Layman, Editors. World Wide Web Consortium, 14 January 1999. This version of the XML Information Set Recommendation is http://www.w3.org/TR/1999/REC-xml-names-19990114. The latest version of Namespaces in XML is available at http://www.w3.org/TR/REC-xml-names.

[XML Information Set]

XML Information Set (Second Edition), J. Cowan and R. Tobin, Editors. World Wide Web Consortium, 4 February 2004. This version of the XML Information Set Recommendation is http://www.w3.org/TR/2004/REC-xml-infoset-20040204. The latest version of XML Information Set is available at http://www.w3.org/TR/xml-infoset.

[XML Schema Structures]

XML Schema Part 1: Structures Second Edition, H. Thompson, D. Beech, M. Maloney, and N. Mendelsohn, Editors. World Wide Web Consortium, 28 October 2004. This version of the XML Schema Part 1 Recommendation is http://www.w3.org/TR/2004/REC-xmlschema-1-20041028. The latest version of XML Schema Part 1 is available at http://www.w3.org/TR/xmlschema-1.

[XML Schema Datatypes]

XML Schema Part 2: Datatypes Second Edition, P. Byron and A. Malhotra, Editors. World Wide Web Consortium, 28 October 2004. This version of the XML Schema Part 2 Recommendation is http://www.w3.org/TR/2004/REC-xmlschema-2-20041028. The latest version of XML Schema Part 2 is available at http://www.w3.org/TR/xmlschema-2.

9.2 Other References

[SOAP 1.1 Request Optional Response HTTP Binding]

SOAP 1.1 Request Optional Response HTTP Binding, D. Orchard, Editor. World Wide Web Consortium, 21 March 2006. This version of the SOAP 1.1 Request Optional Response HTTP Binding specification is http://www.w3.org/TR/2006/NOTE-soap11-ror-httpbinding-20060321/. The latest version of SOAP 1.1 Request Optional Response HTTP Binding is available http://www.w3.org/TR/soap11-ror-httpbinding.

[WS-Addressing WSDL Binding]

Web Services Addressing 1.0 - WSDL Binding, M. Gudgin, M. Hadley, T. Rogers, Ü. Yalçinalp, Editors. World Wide Web Consortium, 16 February 2006. This version of the WS-Addressing WSDL Binding specification is http://www.w3.org/TR/2006/WD-ws-addr-wsdl-20060216. The latest version of WS-Addressing WSDL Binding is available at http://www.w3.org/TR/ws-addr-wsdl.

[WSDL 2.0 Core Language]

Web Services Description Language (WSDL) Version 2.0 Part 1: Core Language, R. Chinnici, J. J. Moreau, A. Ryman, and S. Weerawarana, Editors. World Wide Web Consortium, 27 March 2006. This version of the WSDL 2.0 specification is http://www.w3.org/TR/2006/CR-wsdl20-20060327. The latest version of WSDL 2.0 is available at http://www.w3.org/TR/wsdl20.

[WS-Security]

Web Services Security: SOAP Message Security 1.0 (WS-Security 2004), A. Nadalin, C. Kaler, P. Hallam-Baker, R. Monzillo, Editors. Organization for the Advancement of Structured Information Standards, March 2004.