A zip archive of the SMIL 2.1 DTDs is also available.
Informative tables of elements content for SMIL2.1 profiles (Language Profile, Mobile Profile and Extended Mobile Profile) are provided for user convenience.
This section is Normative.
<!-- ====================================================================== -->
<!-- SMIL Animation Module =============================================== -->
<!-- file: SMIL-anim.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Jacco van Ossenbruggen
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Animation//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-anim.mod"
====================================================================== -->
<!-- ============================= Dependencies =========================== -->
<!-- The integrating profile is expected to define the following entities,
Unless the defaults provided are sufficient.
-->
<!-- SMIL.SplineAnimation.module entity: Define as "INCLUDE" if the integrating
profile includes the SMIL 2.1 SplineAnimation Module, "IGNORE" if not.
The default is "IGNORE", i.e. by default SplineAnimation is not included
in the integrating language profile.
-->
<!ENTITY % SMIL.SplineAnimation.module "IGNORE">
<!-- Animation depends on SMIL Timing, importing the attributes listed
in the SMIL.AnimationTime.attrib entity. If the integrating profile does
include the SMIL.MinMaxTiming.module, its default value includes the
attributes defined in SMIL.BasicInlineTiming.attrib and
SMIL.MinMaxTiming.attrib. Otherwise, it is defaulted to
SMIL.BasicInlineTiming.attrib, which is the minimum requirement.
Note that the profile can override these defaults by redefining
SMIL.AnimationTime.attrib. The profile is also expected to define
SMIL.fill.attrib and SMIL.fillDefault.attrib.
-->
<!ENTITY % SMIL.MinMaxTiming.module "IGNORE">
<![%SMIL.MinMaxTiming.module;[
<!ENTITY % SMIL.AnimationTime.attrib "
%SMIL.BasicInlineTiming.attrib;
%SMIL.BasicInlineTiming-deprecated.attrib;
%SMIL.MinMaxTiming.attrib;
">
]]>
<!ENTITY % SMIL.AnimationTime.attrib "%SMIL.BasicInlineTiming.attrib;">
<!ENTITY % SMIL.fill.attrib "">
<!ENTITY % SMIL.animTimingAttrs "
%SMIL.AnimationTime.attrib;
%SMIL.fill.attrib;
%SMIL.fillDefault.attrib;
">
<!-- Language Designer chooses to integrate targetElement or xlink attributes.
To integrate the targetElement attribute, define the entity
animation-targetElement as "INCLUDE"; to integrate the XLink attributes,
define animation-XLinkTarget as "INCLUDE".
One or the other MUST be defined. It is strongly recommended that only one
of the two be defined.
-->
<!ENTITY % SMIL.animation-targetElement "IGNORE">
<![%SMIL.animation-targetElement;[
<!ENTITY % SMIL.animTargetElementAttr
"targetElement IDREF #IMPLIED"
>
]]>
<!ENTITY % SMIL.animTargetElementAttr "">
<!ENTITY % SMIL.animation-XLinkTarget "IGNORE">
<![%SMIL.animation-XLinkTarget;[
<!ENTITY % SMIL.animTargetElementXLink "
actuate (onRequest|onLoad) 'onLoad'
href %URI.datatype; #IMPLIED
show (new | embed | replace) #FIXED 'embed'
type (simple | extended | locator | arc) #FIXED 'simple'
">
]]>
<!ENTITY % SMIL.animTargetElementXLink "">
<!-- ========================== Attribute Groups ========================== -->
<!-- All animation elements include these attributes -->
<!ENTITY % SMIL.animAttrsCommon
"%Core.attrib;
%I18n.attrib;
%SMIL.Test.attrib;
%SMIL.animTimingAttrs;
%SMIL.animTargetElementAttr;
%SMIL.animTargetElementXLink;"
>
<!-- All except animateMotion need an identified target attribute -->
<!ENTITY % SMIL.animAttrsNamedTarget
"%SMIL.animAttrsCommon;
attributeName CDATA #REQUIRED
attributeType CDATA #IMPLIED"
>
<!-- All except set support the full animation-function specification,
additive and cumulative animation.
SplineAnimation adds the attributes keyTimes, keySplines and path,
and the calcMode value "spline", to those of BasicAnimation.
-->
<![%SMIL.SplineAnimation.module;[
<!ENTITY % SMIL.splineAnimCalcModeValues "| spline">
<!ENTITY % SMIL.splineAnimValueAttrs
"keyTimes CDATA #IMPLIED
keySplines CDATA #IMPLIED"
>
<!ENTITY % SMIL.splineAnimPathAttr
"path CDATA #IMPLIED"
>
]]>
<!ENTITY % SMIL.splineAnimCalcModeValues "">
<!ENTITY % SMIL.splineAnimValueAttrs "">
<!ENTITY % SMIL.splineAnimPathAttr "">
<!ENTITY % SMIL.animValueAttrs "
%SMIL.BasicAnimation.attrib;
calcMode (discrete|linear|paced %SMIL.splineAnimCalcModeValues;) 'linear'
%SMIL.splineAnimValueAttrs;
additive (replace | sum) 'replace'
accumulate (none | sum) 'none'"
>
<!-- ========================== Animation Elements ======================== -->
<!ENTITY % SMIL.animate.attrib "">
<!ENTITY % SMIL.animate.content "EMPTY">
<!ENTITY % SMIL.animate.qname "animate">
<!ELEMENT %SMIL.animate.qname; %SMIL.animate.content;>
<!ATTLIST %SMIL.animate.qname; %SMIL.animate.attrib;
%SMIL.animAttrsNamedTarget;
%SMIL.animValueAttrs;
>
<!ENTITY % SMIL.set.attrib "">
<!ENTITY % SMIL.set.content "EMPTY">
<!ENTITY % SMIL.set.qname "set">
<!ELEMENT %SMIL.set.qname; %SMIL.set.content;>
<!ATTLIST %SMIL.set.qname; %SMIL.set.attrib;
%SMIL.animAttrsNamedTarget;
to CDATA #IMPLIED
>
<!ENTITY % SMIL.animateMotion.attrib "">
<!ENTITY % SMIL.animateMotion.content "EMPTY">
<!ENTITY % SMIL.animateMotion.qname "animateMotion">
<!ELEMENT %SMIL.animateMotion.qname; %SMIL.animateMotion.content;>
<!ATTLIST %SMIL.animateMotion.qname; %SMIL.animateMotion.attrib;
%SMIL.animAttrsCommon;
%SMIL.animValueAttrs;
%SMIL.splineAnimPathAttr;
origin (default) "default"
>
<!ENTITY % SMIL.animateColor.attrib "">
<!ENTITY % SMIL.animateColor.content "EMPTY">
<!ENTITY % SMIL.animateColor.qname "animateColor">
<!ELEMENT %SMIL.animateColor.qname; %SMIL.animateColor.content;>
<!ATTLIST %SMIL.animateColor.qname; %SMIL.animateColor.attrib;
%SMIL.animAttrsNamedTarget;
%SMIL.animValueAttrs;
>
<!-- ========================== End Animation ============================= -->
<!-- end of SMIL-anim.mod -->
<!-- ================================================================= -->
<!-- SMIL Content Control Module ==================================== -->
<!-- file: SMIL-control.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Jacco van Ossenbruggen, Aaron Cohen
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Content Control//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-control.mod"
================================================================= -->
<!ENTITY % SMIL.BasicContentControl.module "INCLUDE">
<![%SMIL.BasicContentControl.module;[
<!ENTITY % SMIL.switch.attrib "">
<!ENTITY % SMIL.switch.content "EMPTY">
<!ENTITY % SMIL.switch.qname "switch">
<!ELEMENT %SMIL.switch.qname; %SMIL.switch.content;>
<!ATTLIST %SMIL.switch.qname; %SMIL.switch.attrib;
%Core.attrib;
%I18n.attrib;
>
]]>
<!-- ========================= CustomTest Elements ======================== -->
<!ENTITY % SMIL.CustomTestAttributes.module "IGNORE">
<![%SMIL.CustomTestAttributes.module;[
<!ENTITY % SMIL.customTest.attrib "">
<!ENTITY % SMIL.customTest.qname "customTest">
<!ENTITY % SMIL.customTest.content "EMPTY">
<!ELEMENT %SMIL.customTest.qname; %SMIL.customTest.content;>
<!ATTLIST %SMIL.customTest.qname; %SMIL.customTest.attrib;
defaultState (true|false) 'false'
override (visible|hidden) 'hidden'
uid %URI.datatype; #IMPLIED
%Core.attrib;
%I18n.attrib;
>
<!ENTITY % SMIL.customAttributes.attrib "">
<!ENTITY % SMIL.customAttributes.qname "customAttributes">
<!ENTITY % SMIL.customAttributes.content "(customTest+)">
<!ELEMENT %SMIL.customAttributes.qname; %SMIL.customAttributes.content;>
<!ATTLIST %SMIL.customAttributes.qname; %SMIL.customAttributes.attrib;
%Core.attrib;
%I18n.attrib;
>
]]> <!-- end of CustomTestAttributes -->
<!-- ========================= PrefetchControl Elements =================== -->
<!ENTITY % SMIL.PrefetchControl.module "IGNORE">
<![%SMIL.PrefetchControl.module;[
<!ENTITY % SMIL.prefetch.attrib "">
<!ENTITY % SMIL.prefetch.qname "prefetch">
<!ENTITY % SMIL.prefetch.content "EMPTY">
<!ELEMENT %SMIL.prefetch.qname; %SMIL.prefetch.content;>
<!ATTLIST %SMIL.prefetch.qname; %SMIL.prefetch.attrib;
src %URI.datatype; #IMPLIED
mediaSize CDATA #IMPLIED
mediaTime CDATA #IMPLIED
bandwidth CDATA #IMPLIED
%Core.attrib;
%I18n.attrib;
>
]]>
<!-- end of SMIL-control.mod -->
<!-- ====================================================================== -->
<!-- SMIL 2.1 Layout Modules ============================================== -->
<!-- file: SMIL-layout.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Jacco van Ossenbruggen, Aaron Cohen
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Layout//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-layout.mod"
=================================================================== -->
<!-- ================== BasicLayout ======================================= -->
<!-- ================== BasicLayout Profiling Entities ==================== -->
<!ENTITY % SMIL.layout.attrib "">
<!ENTITY % SMIL.region.attrib "">
<!ENTITY % SMIL.rootlayout.attrib "">
<!ENTITY % SMIL.layout.content "EMPTY">
<!ENTITY % SMIL.region.content "EMPTY">
<!ENTITY % SMIL.rootlayout.content "EMPTY">
<!-- ================== BasicLayout Entities ============================== -->
<!ENTITY % SMIL.common-layout-attrs "
height CDATA 'auto'
width CDATA 'auto'
%SMIL.backgroundColor.attrib;
">
<!ENTITY % SMIL.region-attrs "
bottom CDATA 'auto'
left CDATA 'auto'
right CDATA 'auto'
top CDATA 'auto'
z-index CDATA #IMPLIED
showBackground (always|whenActive) 'always'
%SMIL.fit.attrib;
">
<!-- ================== BasicLayout Elements ============================== -->
<!--
Layout contains the region and root-layout elements defined by
smil-basic-layout or other elements defined by an external layout
mechanism.
-->
<!ENTITY % SMIL.layout.qname "layout">
<!ELEMENT %SMIL.layout.qname; %SMIL.layout.content;>
<!ATTLIST %SMIL.layout.qname; %SMIL.layout.attrib;
%Core.attrib;
%I18n.attrib;
type CDATA 'text/smil-basic-layout'
>
<!-- ================== Region Element ==================================== -->
<!ENTITY % SMIL.region.qname "region">
<!ELEMENT %SMIL.region.qname; %SMIL.region.content;>
<!ATTLIST %SMIL.region.qname; %SMIL.region.attrib;
%Core.attrib;
%I18n.attrib;
%SMIL.backgroundColor-deprecated.attrib;
%SMIL.common-layout-attrs;
%SMIL.region-attrs;
regionName CDATA #IMPLIED
>
<!-- ================== Root-layout Element =============================== -->
<!ENTITY % SMIL.root-layout.qname "root-layout">
<!ELEMENT %SMIL.root-layout.qname; %SMIL.rootlayout.content; >
<!ATTLIST %SMIL.root-layout.qname; %SMIL.rootlayout.attrib;
%Core.attrib;
%I18n.attrib;
%SMIL.backgroundColor-deprecated.attrib;
%SMIL.common-layout-attrs;
>
<!-- ================== AudioLayout ======================================= -->
<!ENTITY % SMIL.AudioLayout.module "IGNORE">
<![%SMIL.AudioLayout.module;[
<!-- ================== AudioLayout Entities ============================ -->
<!ENTITY % SMIL.audio-attrs "
soundLevel CDATA '100%'
">
<!-- ================ AudioLayout Elements ============================== -->
<!-- ================ Add soundLevel to region element ================== -->
<!ATTLIST %SMIL.region.qname; %SMIL.audio-attrs;>
]]> <!-- end AudioLayout.module -->
<!-- ================ MultiWindowLayout =================================== -->
<!ENTITY % SMIL.MultiWindowLayout.module "IGNORE">
<![%SMIL.MultiWindowLayout.module;[
<!-- ============== MultiWindowLayout Profiling Entities ================ -->
<!ENTITY % SMIL.topLayout.attrib "">
<!ENTITY % SMIL.topLayout.content "EMPTY">
<!-- ============== MultiWindowLayout Elements ========================== -->
<!--================= topLayout element ================================= -->
<!ENTITY % SMIL.topLayout.qname "topLayout">
<!ELEMENT %SMIL.topLayout.qname; %SMIL.topLayout.content;>
<!ATTLIST %SMIL.topLayout.qname; %SMIL.topLayout.attrib;
%Core.attrib;
%I18n.attrib;
%SMIL.common-layout-attrs;
close (onRequest|whenNotActive) 'onRequest'
open (onStart|whenActive) 'onStart'
>
]]> <!-- end MultiWindowLayout.module -->
<!-- ====================== AlignmentLayout =============================== -->
<!ENTITY % SMIL.AlignmentLayout.module "IGNORE">
<![%SMIL.AlignmentLayout.module;[
<!-- ========== AlignmentLayout Profiling Entities ====================== -->
<!ENTITY % SMIL.regPoint.attrib "">
<!ENTITY % SMIL.regPoint.content "EMPTY">
<!-- ============ AlignmentLayout Elements ============================== -->
<!ENTITY % SMIL.regPoint.qname "regPoint">
<!ELEMENT %SMIL.regPoint.qname; %SMIL.regPoint.content;>
<!ATTLIST %SMIL.regPoint.qname; %SMIL.regPoint.attrib;
%Core.attrib;
%I18n.attrib;
%SMIL.regAlign.attrib;
bottom CDATA 'auto'
left CDATA 'auto'
right CDATA 'auto'
top CDATA 'auto'
>
<!ATTLIST %SMIL.region.qname;
%SMIL.RegistrationPoint.attrib;
%SMIL.soundAlign.attrib;
>
]]> <!-- end AlignmentLayout.module -->
<!-- ================== BackgroundTilingLayout ============================ -->
<!ENTITY % SMIL.BackgroundTilingLayout.module "IGNORE">
<![%SMIL.BackgroundTilingLayout.module;[
<!-- ================== BackgroundTilingLayout Entities ================= -->
<!ENTITY % SMIL.BackgroundTiling-attrs "
backgroundImage %URI.datatype; 'none'
backgroundRepeat (repeat|repeatX|repeatY|noRepeat|inherit) 'repeat'
">
<!-- ================ BackgroundTilingLayout Elements =================== -->
<!-- ================ Add attributes to region element ================== -->
<!ATTLIST %SMIL.region.qname; %SMIL.BackgroundTiling-attrs;>
<!ATTLIST %SMIL.root-layout.qname; %SMIL.BackgroundTiling-attrs;>
<![%SMIL.MultiWindowLayout.module;[
<!ATTLIST %SMIL.topLayout.qname; %SMIL.BackgroundTiling-attrs;>
]]>
]]> <!-- end BackgroundTilingLayout.module -->
<!-- end of SMIL-layout.mod -->
<!-- ====================================================================== -->
<!-- SMIL Linking Module ================================================= -->
<!-- file: SMIL-link.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Jacco van Ossenbruggen, Lloyd Rutledge, Aaron Cohen
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Linking//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-link.mod"
====================================================================== -->
<!-- ======================== LinkingAttributes Entities ================== -->
<!ENTITY % SMIL.linking-attrs "
sourceLevel CDATA '100%'
destinationLevel CDATA '100%'
sourcePlaystate (play|pause|stop) #IMPLIED
destinationPlaystate (play|pause) 'play'
show (new|pause|replace) 'replace'
accesskey %Character.datatype; #IMPLIED
target CDATA #IMPLIED
external (true|false) 'false'
actuate (onRequest|onLoad) 'onRequest'
%SMIL.tabindex.attrib;
">
<!-- ========================= BasicLinking Elements ====================== -->
<!ENTITY % SMIL.BasicLinking.module "IGNORE">
<![%SMIL.BasicLinking.module;[
<!-- ======================= BasicLinking Entities ====================== -->
<!ENTITY % SMIL.Shape "(rect|circle|poly|default)">
<!ENTITY % SMIL.Coords "CDATA">
<!-- comma separated list of lengths -->
<!ENTITY % SMIL.a.attrib "">
<!ENTITY % SMIL.a.content "EMPTY">
<!ENTITY % SMIL.a.qname "a">
<!ELEMENT %SMIL.a.qname; %SMIL.a.content;>
<!ATTLIST %SMIL.a.qname; %SMIL.a.attrib;
%SMIL.linking-attrs;
href %URI.datatype; #REQUIRED
%Core.attrib;
%I18n.attrib;
>
<!ENTITY % SMIL.area.attrib "">
<!ENTITY % SMIL.area.content "EMPTY">
<!ENTITY % SMIL.area.qname "area">
<!ELEMENT %SMIL.area.qname; %SMIL.area.content;>
<!ATTLIST %SMIL.area.qname; %SMIL.area.attrib;
%SMIL.linking-attrs;
shape %SMIL.Shape; 'rect'
coords %SMIL.Coords; #IMPLIED
href %URI.datatype; #IMPLIED
nohref (nohref) #IMPLIED
%Core.attrib;
%I18n.attrib;
>
<!ENTITY % SMIL.anchor.attrib "">
<!ENTITY % SMIL.anchor.content "EMPTY">
<!ENTITY % SMIL.anchor.qname "anchor">
<!ELEMENT %SMIL.anchor.qname; %SMIL.anchor.content;>
<!ATTLIST %SMIL.anchor.qname; %SMIL.anchor.attrib;
%SMIL.linking-attrs;
shape %SMIL.Shape; 'rect'
coords %SMIL.Coords; #IMPLIED
href %URI.datatype; #IMPLIED
nohref (nohref) #IMPLIED
%Core.attrib;
%I18n.attrib;
>
]]> <!-- end of BasicLinking -->
<!-- ======================== ObjectLinking =============================== -->
<!ENTITY % SMIL.ObjectLinking.module "IGNORE">
<![%SMIL.ObjectLinking.module;[
<!ENTITY % SMIL.Fragment "
fragment CDATA #IMPLIED
">
<!-- ====================== ObjectLinking Elements ====================== -->
<!-- add fragment attribute to area, and anchor elements -->
<!ATTLIST %SMIL.area.qname;
%SMIL.Fragment;
>
<!ATTLIST %SMIL.anchor.qname;
%SMIL.Fragment;
>
]]>
<!-- ======================== End ObjectLinking =========================== -->
<!-- end of SMIL-link.mod -->
<!-- ====================================================================== -->
<!-- SMIL 2.1 Media Objects Modules ======================================= -->
<!-- file: SMIL-media.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Rob Lanphier, Jacco van Ossenbruggen, Sjoerd Mullender
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Media Objects//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-media.mod"
====================================================================== -->
<!-- ================== Profiling Entities ================================ -->
<!ENTITY % SMIL.MediaClipping.module "IGNORE">
<![%SMIL.MediaClipping.module;[
<!ENTITY % SMIL.mo-attributes-MediaClipping "
%SMIL.MediaClip.attrib;
">
]]>
<!ENTITY % SMIL.mo-attributes-MediaClipping "">
<!ENTITY % SMIL.MediaClipping.deprecated.module "IGNORE">
<![%SMIL.MediaClipping.module;[
<!ENTITY % SMIL.mo-attributes-MediaClipping-deprecated "
%SMIL.MediaClip.attrib.deprecated;
">
]]>
<!ENTITY % SMIL.mo-attributes-MediaClipping-deprecated "">
<!ENTITY % SMIL.MediaParam.module "IGNORE">
<![%SMIL.MediaParam.module;[
<!ENTITY % SMIL.mo-attributes-MediaParam "
erase (whenDone|never) 'whenDone'
mediaRepeat (preserve|strip) 'preserve'
sensitivity CDATA 'opaque'
">
<!ENTITY % SMIL.param.qname "param">
<!ELEMENT %SMIL.param.qname; EMPTY>
<!ATTLIST %SMIL.param.qname; %SMIL.param.attrib;
%Core.attrib;
%I18n.attrib;
name CDATA #IMPLIED
value CDATA #IMPLIED
valuetype (data|ref|object) "data"
type %ContentType.datatype; #IMPLIED
>
<!ENTITY % SMIL.paramGroup.content "(param*)">
<!ENTITY % SMIL.paramGroup.attrib "">
<!ENTITY % SMIL.paramGroup.qname "paramGroup">
<!ELEMENT %SMIL.paramGroup.qname; %SMIL.paramGroup.content;>
<!ATTLIST %SMIL.paramGroup.qname; %SMIL.paramGroup.attrib;
%Core.attrib;
%I18n.attrib;
>
]]>
<!ENTITY % SMIL.mo-attributes-MediaParam "">
<!ENTITY % SMIL.MediaAccessibility.module "IGNORE">
<![%SMIL.MediaAccessibility.module;[
<!ENTITY % SMIL.mo-attributes-MediaAccessibility "
readIndex CDATA #IMPLIED
">
]]>
<!ENTITY % SMIL.mo-attributes-MediaAccessibility "">
<!ENTITY % SMIL.BasicMedia.module "INCLUDE">
<![%SMIL.BasicMedia.module;[
<!ENTITY % SMIL.media-object.content "EMPTY">
<!ENTITY % SMIL.media-object.attrib "">
<!ENTITY % SMIL.soundAlign.attrib "">
<!-- ================ Media Objects Entities ============================ -->
<!ENTITY % SMIL.mo-attributes-BasicMedia "
src CDATA #IMPLIED
type CDATA #IMPLIED
">
<!ENTITY % SMIL.mo-attributes "
%Core.attrib;
%I18n.attrib;
%SMIL.Description.attrib;
%SMIL.mo-attributes-BasicMedia;
%SMIL.mo-attributes-MediaParam;
%SMIL.mo-attributes-MediaAccessibility;
%SMIL.media-object.attrib;
%SMIL.soundAlign.attrib;
">
<!--
Most info is in the attributes, media objects are empty or
have children defined at the language integration level:
-->
<!ENTITY % SMIL.mo-content "%SMIL.media-object.content;">
<!-- ================ Media Objects Elements ============================ -->
<!ENTITY % SMIL.ref.qname "ref">
<!ENTITY % SMIL.audio.qname "audio">
<!ENTITY % SMIL.img.qname "img">
<!ENTITY % SMIL.video.qname "video">
<!ENTITY % SMIL.text.qname "text">
<!ENTITY % SMIL.textstream.qname "textstream">
<!ENTITY % SMIL.animation.qname "animation">
<!ENTITY % SMIL.ref.content "%SMIL.mo-content;">
<!ENTITY % SMIL.audio.content "%SMIL.mo-content;">
<!ENTITY % SMIL.img.content "%SMIL.mo-content;">
<!ENTITY % SMIL.video.content "%SMIL.mo-content;">
<!ENTITY % SMIL.text.content "%SMIL.mo-content;">
<!ENTITY % SMIL.textstream.content "%SMIL.mo-content;">
<!ENTITY % SMIL.animation.content "%SMIL.mo-content;">
<!ELEMENT %SMIL.ref.qname; %SMIL.ref.content;>
<!ELEMENT %SMIL.audio.qname; %SMIL.audio.content;>
<!ELEMENT %SMIL.img.qname; %SMIL.img.content;>
<!ELEMENT %SMIL.video.qname; %SMIL.video.content;>
<!ELEMENT %SMIL.text.qname; %SMIL.text.content;>
<!ELEMENT %SMIL.textstream.qname; %SMIL.textstream.content;>
<!ELEMENT %SMIL.animation.qname; %SMIL.animation.content;>
<!ATTLIST %SMIL.img.qname;
%SMIL.mo-attributes-MediaClipping;
%SMIL.mo-attributes-MediaClipping-deprecated;
%SMIL.mo-attributes;
>
<!ATTLIST %SMIL.text.qname;
%SMIL.mo-attributes-MediaClipping;
%SMIL.mo-attributes-MediaClipping-deprecated;
%SMIL.mo-attributes;
>
<!ATTLIST %SMIL.ref.qname;
%SMIL.mo-attributes-MediaClipping;
%SMIL.mo-attributes-MediaClipping-deprecated;
%SMIL.mo-attributes;
>
<!ATTLIST %SMIL.audio.qname;
%SMIL.mo-attributes-MediaClipping;
%SMIL.mo-attributes-MediaClipping-deprecated;
%SMIL.mo-attributes;
>
<!ATTLIST %SMIL.video.qname;
%SMIL.mo-attributes-MediaClipping;
%SMIL.mo-attributes-MediaClipping-deprecated;
%SMIL.mo-attributes;
>
<!ATTLIST %SMIL.textstream.qname;
%SMIL.mo-attributes-MediaClipping;
%SMIL.mo-attributes-MediaClipping-deprecated;
%SMIL.mo-attributes;
>
<!ATTLIST %SMIL.animation.qname;
%SMIL.mo-attributes-MediaClipping;
%SMIL.mo-attributes-MediaClipping-deprecated;
%SMIL.mo-attributes;
>
]]>
<!ENTITY % SMIL.mo-attributes-BasicMedia "">
<!-- BrushMedia -->
<!ENTITY % SMIL.BrushMedia.module "IGNORE">
<![%SMIL.BrushMedia.module;[
<!ENTITY % SMIL.brush.attrib "">
<!ENTITY % SMIL.brush.content "%SMIL.mo-content;">
<!ENTITY % SMIL.brush.qname "brush">
<!ELEMENT %SMIL.brush.qname; %SMIL.brush.content;>
<!ATTLIST %SMIL.brush.qname; %SMIL.brush.attrib;
%Core.attrib;
%I18n.attrib;
%SMIL.Description.attrib;
%SMIL.mo-attributes-MediaAccessibility;
%SMIL.mo-attributes-MediaParam;
%SMIL.media-object.attrib;
color CDATA #IMPLIED
>
]]>
<!-- end of SMIL-media.mod -->
<!-- ================================================================ -->
<!-- SMIL Metainformation Module =================================== -->
<!-- file: SMIL-metainformation.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Thierry Michel, Jacco van Ossenbruggen
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This module declares the meta and metadata elements types and
its attributes, used to provide declarative document metainformation.
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Metadata//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-metainformation.mod"
================================================================ -->
<!-- ================== Profiling Entities ========================== -->
<!ENTITY % SMIL.meta.content "EMPTY">
<!ENTITY % SMIL.meta.attrib "">
<!ENTITY % SMIL.meta.qname "meta">
<!ENTITY % SMIL.metadata.content "EMPTY">
<!ENTITY % SMIL.metadata.attrib "">
<!ENTITY % SMIL.metadata.qname "metadata">
<!-- ================== meta element ================================ -->
<!ELEMENT %SMIL.meta.qname; %SMIL.meta.content;>
<!ATTLIST %SMIL.meta.qname; %SMIL.meta.attrib;
%Core.attrib;
%I18n.attrib;
content CDATA #REQUIRED
name CDATA #REQUIRED
>
<!-- ================== metadata element ============================ -->
<!ELEMENT %SMIL.metadata.qname; %SMIL.metadata.content;>
<!ATTLIST %SMIL.metadata.qname; %SMIL.metadata.attrib;
%Core.attrib;
%I18n.attrib;
>
<!-- end of SMIL-metadata.mod -->
<!-- ====================================================================== -->
<!-- SMIL Structure Module =============================================== -->
<!-- file: SMIL-struct.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Warner ten Kate, Jacco van Ossenbruggen
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Structure//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-struct.mod"
===================================================================== -->
<!-- ================== SMIL Document Root =============================== -->
<!ENTITY % SMIL.smil.attrib "" >
<!ENTITY % SMIL.smil.content "EMPTY" >
<!ENTITY % SMIL.smil.qname "smil" >
<!ELEMENT %SMIL.smil.qname; %SMIL.smil.content;>
<!ATTLIST %SMIL.smil.qname; %SMIL.smil.attrib;
%Core.attrib;
%I18n.attrib;
xmlns %URI.datatype; #REQUIRED
>
<!-- ================== The Document Head ================================ -->
<!ENTITY % SMIL.head.content "EMPTY" >
<!ENTITY % SMIL.head.attrib "" >
<!ENTITY % SMIL.head.qname "head" >
<!ELEMENT %SMIL.head.qname; %SMIL.head.content;>
<!ATTLIST %SMIL.head.qname; %SMIL.head.attrib;
%Core.attrib;
%I18n.attrib;
>
<!--=================== The Document Body - Timing Root ================== -->
<!ENTITY % SMIL.body.content "EMPTY" >
<!ENTITY % SMIL.body.attrib "" >
<!ENTITY % SMIL.body.qname "body" >
<!ELEMENT %SMIL.body.qname; %SMIL.body.content;>
<!ATTLIST %SMIL.body.qname; %SMIL.body.attrib;
%Core.attrib;
%I18n.attrib;
>
<!-- end of SMIL-struct.mod -->
<!-- ================================================================= -->
<!-- SMIL Timing and Synchronization Modules ========================= -->
<!-- file: SMIL-timing.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Jacco van Ossenbruggen.
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Timing//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-timing.mod"
================================================================= -->
<!-- ================== Timing Elements ============================== -->
<!ENTITY % SMIL.BasicTimeContainers.module "IGNORE">
<![%SMIL.BasicTimeContainers.module;[
<!ENTITY % SMIL.par.content "EMPTY">
<!ENTITY % SMIL.seq.content "EMPTY">
<!ENTITY % SMIL.par.attrib "">
<!ENTITY % SMIL.seq.attrib "">
<!ENTITY % SMIL.seq.qname "seq">
<!ENTITY % SMIL.par.qname "par">
<!ELEMENT %SMIL.seq.qname; %SMIL.seq.content;>
<!ATTLIST %SMIL.seq.qname; %SMIL.seq.attrib;
%Core.attrib;
%I18n.attrib;
%SMIL.Description.attrib;
>
<!ELEMENT %SMIL.par.qname; %SMIL.par.content;>
<!ATTLIST %SMIL.par.qname; %SMIL.par.attrib;
%Core.attrib;
%I18n.attrib;
%SMIL.Description.attrib;
>
]]> <!-- End of BasicTimeContainers.module -->
<!ENTITY % SMIL.BasicExclTimeContainers.module "IGNORE">
<![%SMIL.BasicExclTimeContainers.module;[
<!ENTITY % SMIL.excl.content "EMPTY">
<!ENTITY % SMIL.excl.attrib "">
<!ENTITY % SMIL.excl.qname "excl">
<!ELEMENT %SMIL.excl.qname; %SMIL.excl.content;>
<!ATTLIST %SMIL.excl.qname; %SMIL.excl.attrib;
%Core.attrib;
%I18n.attrib;
%SMIL.Description.attrib;
>
]]> <!-- End of BasicExclTimeContainers.module -->
<!ENTITY % SMIL.BasicPriorityClassContainers.module "IGNORE">
<![%SMIL.BasicPriorityClassContainers.module;[
<!ENTITY % SMIL.priorityClass.content "EMPTY">
<!ENTITY % SMIL.priorityClass.attrib "">
<!ENTITY % SMIL.priorityClass.qname "priorityClass">
<!ELEMENT %SMIL.priorityClass.qname; %SMIL.priorityClass.content;>
<!ATTLIST %SMIL.priorityClass.qname; %SMIL.priorityClass.attrib;
peers (stop|pause|defer|never) "stop"
higher (stop|pause) "pause"
lower (defer|never) "defer"
pauseDisplay (disable|hide|show ) "show"
%SMIL.Description.attrib;
%Core.attrib;
%I18n.attrib;
>
]]> <!-- End of BasicPriorityClassContainers.module -->
<!-- end of SMIL-timing.mod -->
<!-- ====================================================================== -->
<!-- SMIL Transition Module ============================================== -->
<!-- file: SMIL-transition.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Jacco van Ossenbruggen.
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Transition//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/SMIL-transition.mod"
====================================================================== -->
<!ENTITY % SMIL.TransitionModifiers.module "IGNORE">
<![%SMIL.TransitionModifiers.module;[
<!ENTITY % SMIL.transition-modifiers-attrs '
horzRepeat CDATA "1"
vertRepeat CDATA "1"
borderWidth CDATA "0"
borderColor CDATA "black"
'>
]]> <!-- End of TransitionModifiers.module -->
<!ENTITY % SMIL.transition-modifiers-attrs "">
<!ENTITY % SMIL.BasicTransitions.module "INCLUDE">
<![%SMIL.BasicTransitions.module;[
<!ENTITY % SMIL.transition-types "(barWipe|boxWipe|fourBoxWipe|barnDoorWipe|
diagonalWipe|bowTieWipe|miscDiagonalWipe|veeWipe|barnVeeWipe|zigZagWipe|
barnZigZagWipe|irisWipe|triangleWipe|arrowHeadWipe|pentagonWipe|
hexagonWipe|ellipseWipe|eyeWipe|roundRectWipe|starWipe|miscShapeWipe|clockWipe|
pinWheelWipe|singleSweepWipe|fanWipe|doubleFanWipe|doubleSweepWipe|
saloonDoorWipe|windshieldWipe|snakeWipe|spiralWipe|parallelSnakesWipe|
boxSnakesWipe|waterfallWipe|pushWipe|slideWipe|fade|audioFade|audioVisualFade)"
>
<!ENTITY % SMIL.transition-subtypes "(bottom
|bottomCenter|bottomLeft|bottomLeftClockwise|bottomLeftCounterClockwise|
bottomLeftDiagonal|bottomRight|bottomRightClockwise|
bottomRightCounterClockwise|bottomRightDiagonal|centerRight|centerTop|
circle|clockwiseBottom|clockwiseBottomRight|clockwiseLeft|clockwiseNine|
clockwiseRight|clockwiseSix|clockwiseThree|clockwiseTop|clockwiseTopLeft|
clockwiseTwelve|cornersIn|cornersOut|counterClockwiseBottomLeft|
counterClockwiseTopRight|crossfade|diagonalBottomLeft|
diagonalBottomLeftOpposite|diagonalTopLeft|diagonalTopLeftOpposite|
diamond|doubleBarnDoor|doubleDiamond|down|fadeFromColor|fadeToColor|
fanInHorizontal|fanInVertical|fanOutHorizontal|fanOutVertical|fivePoint|
fourBlade|fourBoxHorizontal|fourBoxVertical|fourPoint|fromBottom|fromLeft|
fromRight|fromTop|heart|horizontal|horizontalLeft|horizontalLeftSame|
horizontalRight|horizontalRightSame|horizontalTopLeftOpposite|
horizontalTopRightOpposite|keyhole|left|leftCenter|leftToRight|
oppositeHorizontal|oppositeVertical|parallelDiagonal|
parallelDiagonalBottomLeft|parallelDiagonalTopLeft|
parallelVertical|rectangle|right|rightCenter|sixPoint|top|topCenter|
topLeft|topLeftClockwise|topLeftCounterClockwise|topLeftDiagonal|
topLeftHorizontal|topLeftVertical|topRight|topRightClockwise|
topRightCounterClockwise|topRightDiagonal|topToBottom|twoBladeHorizontal|
twoBladeVertical|twoBoxBottom|twoBoxLeft|twoBoxRight|twoBoxTop|up|
vertical|verticalBottomLeftOpposite|verticalBottomSame|verticalLeft|
verticalRight|verticalTopLeftOpposite|verticalTopSame)"
>
<!ENTITY % SMIL.transition-attrs '
type %SMIL.transition-types; #IMPLIED
subtype %SMIL.transition-subtypes; #IMPLIED
fadeColor CDATA "black"
%SMIL.transition-modifiers-attrs;
'>
<!ENTITY % SMIL.transition.attrib "">
<!ENTITY % SMIL.transition.content "EMPTY">
<!ENTITY % SMIL.transition.qname "transition">
<!ELEMENT %SMIL.transition.qname; %SMIL.transition.content;>
<!ATTLIST %SMIL.transition.qname; %SMIL.transition.attrib;
%Core.attrib;
%I18n.attrib;
%SMIL.transition-attrs;
dur %TimeValue.datatype; #IMPLIED
startProgress CDATA "0.0"
endProgress CDATA "1.0"
direction (forward|reverse) "forward"
>
]]> <!-- End of BasicTransitions.module -->
<!ENTITY % SMIL.InlineTransitions.module "IGNORE">
<![%SMIL.InlineTransitions.module;[
<!ENTITY % SMIL.transitionFilter.attrib "">
<!ENTITY % SMIL.transitionFilter.content "EMPTY">
<!ENTITY % SMIL.transitionFilter.qname "transitionFilter">
<!ELEMENT %SMIL.transitionFilter.qname; %SMIL.transitionFilter.content;>
<!ATTLIST %SMIL.transitionFilter.qname; %SMIL.transitionFilter.attrib;
%Core.attrib;
%I18n.attrib;
%SMIL.transition-attrs;
%SMIL.BasicInlineTiming.attrib;
%SMIL.BasicAnimation.attrib;
calcMode (discrete|linear|paced) 'linear'
>
]]> <!-- End of InlineTransitions.module -->
<!-- ================== FullScreenTransitionEffects ====================== -->
<!ENTITY % SMIL.FullScreenTransitionEffects.module "IGNORE">
<![%SMIL.FullScreenTransitionEffects.module;[
<!-- ================== FullScreenTransitionEffects Entities =========== -->
<!ENTITY % SMIL.scope-attrs "
scope (region|screen) 'region'
">
<!-- ================ Add attributes to region element ================= -->
<!ATTLIST %SMIL.transition.qname; %SMIL.scope-attrs;>
]]> <!-- end FullScreenTransitionEffects.module -->
<!-- end of SMIL-transition.mod -->
<!-- ====================================================================== -->
<!-- SMIL 2.1 Document Model Module ======================================= -->
<!-- file: smil-model-1.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Warner ten Kate, Jacco van Ossenbruggen, Aaron Cohen
Editor for SMIL 2.1: Sjoerd Mullender, CWI
1.1.2.4
2005/06/23 09:07:46
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Document Model 1.0//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/smil-language-profile-model-1.mod"
====================================================================== -->
<!--
This file defines the SMIL 2.1 Language Document Model.
All attributes and content models are defined in the second
half of this file. We first start with some utility definitions.
These are mainly used to simplify the use of Modules in the
second part of the file.
-->
<!-- ================== Util: Head ======================================== -->
<!ENTITY % SMIL.head-meta.content "%SMIL.metadata.qname;">
<!ENTITY % SMIL.head-layout.content "%SMIL.layout.qname;
| %SMIL.switch.qname;">
<!ENTITY % SMIL.head-control.content "%SMIL.customAttributes.qname;">
<!ENTITY % SMIL.head-transition.content "%SMIL.transition.qname;+">
<!ENTITY % SMIL.head-media.content "%SMIL.paramGroup.qname;+">
<!--=================== Util: Body - Content Control ====================== -->
<!ENTITY % SMIL.content-control "%SMIL.switch.qname; | %SMIL.prefetch.qname;">
<!ENTITY % SMIL.content-control-attrs "%SMIL.Test.attrib;
%SMIL.customTestAttr.attrib;
%SMIL.skip-content.attrib;">
<!--=================== Util: Body - Animation ========================= -->
<!ENTITY % SMIL.animation.elements "%SMIL.animate.qname;
| %SMIL.set.qname;
| %SMIL.animateMotion.qname;
| %SMIL.animateColor.qname;">
<!--=================== Util: Body - Media ========================= -->
<!ENTITY % SMIL.media-object "%SMIL.audio.qname;
| %SMIL.video.qname;
| %SMIL.animation.qname;
| %SMIL.text.qname;
| %SMIL.img.qname;
| %SMIL.textstream.qname;
| %SMIL.ref.qname;
| %SMIL.brush.qname;
| %SMIL.animation.elements;">
<!--=================== Util: Body - Timing =============================== -->
<!ENTITY % SMIL.BasicTimeContainers.class "%SMIL.par.qname;
| %SMIL.seq.qname;">
<!ENTITY % SMIL.ExclTimeContainers.class "%SMIL.excl.qname;">
<!ENTITY % SMIL.timecontainer.class "%SMIL.BasicTimeContainers.class;
|%SMIL.ExclTimeContainers.class;">
<!ENTITY % SMIL.timecontainer.content "%SMIL.timecontainer.class;
| %SMIL.media-object;
| %SMIL.content-control;
| %SMIL.a.qname;">
<!ENTITY % SMIL.smil-basictime.attrib "
%SMIL.BasicInlineTiming.attrib;
%SMIL.BasicInlineTiming-deprecated.attrib;
%SMIL.MinMaxTiming.attrib;
">
<!ENTITY % SMIL.timecontainer.attrib "
%SMIL.BasicInlineTiming.attrib;
%SMIL.BasicInlineTiming-deprecated.attrib;
%SMIL.MinMaxTiming.attrib;
%SMIL.RestartTiming.attrib;
%SMIL.RestartDefaultTiming.attrib;
%SMIL.SyncBehavior.attrib;
%SMIL.SyncBehaviorDefault.attrib;
%SMIL.fillDefault.attrib;
">
<!-- ====================================================================== -->
<!-- ====================================================================== -->
<!-- ====================================================================== -->
<!--
The actual content model and attribute definitions for each module
sections follow below.
-->
<!-- ================== Content Control =================================== -->
<!ENTITY % SMIL.BasicContentControl.module "INCLUDE">
<!ENTITY % SMIL.CustomTestAttributes.module "INCLUDE">
<!ENTITY % SMIL.PrefetchControl.module "INCLUDE">
<!ENTITY % SMIL.skip-contentControl.module "INCLUDE">
<!ENTITY % SMIL.switch.content "((%SMIL.timecontainer.class;
| %SMIL.media-object;
| %SMIL.content-control;
| %SMIL.a.qname;
| %SMIL.area.qname;
| %SMIL.anchor.qname;)*
| %SMIL.layout.qname;*)">
<!ENTITY % SMIL.switch.attrib "%SMIL.Test.attrib; %SMIL.customTestAttr.attrib;">
<!ENTITY % SMIL.prefetch.attrib "
%SMIL.timecontainer.attrib;
%SMIL.MediaClip.attrib;
%SMIL.MediaClip.attrib.deprecated;
%SMIL.Test.attrib;
%SMIL.customTestAttr.attrib;
%SMIL.skip-content.attrib;
">
<!ENTITY % SMIL.customAttributes.attrib "%SMIL.Test.attrib; %SMIL.skip-content.attrib;">
<!ENTITY % SMIL.customTest.attrib "%SMIL.skip-content.attrib;">
<!-- ================== Animation ========================================= -->
<!ENTITY % SMIL.BasicAnimation.module "INCLUDE">
<!-- choose targetElement or XLink: -->
<!ENTITY % SMIL.animation-targetElement "INCLUDE">
<!ENTITY % SMIL.animation-XLinkTarget "IGNORE">
<!ENTITY % SMIL.animate.content "EMPTY">
<!ENTITY % SMIL.animateColor.content "EMPTY">
<!ENTITY % SMIL.animateMotion.content "EMPTY">
<!ENTITY % SMIL.set.content "EMPTY">
<!ENTITY % SMIL.animate.attrib "%SMIL.skip-content.attrib; %SMIL.customTestAttr.attrib;">
<!ENTITY % SMIL.animateColor.attrib "%SMIL.skip-content.attrib; %SMIL.customTestAttr.attrib;">
<!ENTITY % SMIL.animateMotion.attrib "%SMIL.skip-content.attrib; %SMIL.customTestAttr.attrib;">
<!ENTITY % SMIL.set.attrib "%SMIL.skip-content.attrib; %SMIL.customTestAttr.attrib;">
<!-- ================== Layout ============================================ -->
<!ENTITY % SMIL.BasicLayout.module "INCLUDE">
<!ENTITY % SMIL.AudioLayout.module "INCLUDE">
<!ENTITY % SMIL.MultiWindowLayout.module "INCLUDE">
<!ENTITY % SMIL.SubRegionLayout.module "INCLUDE">
<!ENTITY % SMIL.AlignmentLayout.module "INCLUDE">
<!ENTITY % SMIL.OverrideLayout.module "INCLUDE">
<!ENTITY % SMIL.BackgroundTilingLayout.module "INCLUDE">
<!ENTITY % SMIL.layout.content "(%SMIL.region.qname;
| %SMIL.topLayout.qname;
| %SMIL.root-layout.qname;
| %SMIL.regPoint.qname;)*">
<!ENTITY % SMIL.region.content "(%SMIL.region.qname;)*">
<!ENTITY % SMIL.topLayout.content "(%SMIL.region.qname;)*">
<!ENTITY % SMIL.rootlayout.content "EMPTY">
<!ENTITY % SMIL.regPoint.content "EMPTY">
<!ENTITY % SMIL.layout.attrib "%SMIL.Test.attrib; %SMIL.customTestAttr.attrib;">
<!ENTITY % SMIL.rootlayout.attrib "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.topLayout.attrib "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.region.attrib "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.regPoint.attrib "%SMIL.content-control-attrs;">
<!-- ================== Linking =========================================== -->
<!ENTITY % SMIL.LinkingAttributes.module "INCLUDE">
<!ENTITY % SMIL.BasicLinking.module "INCLUDE">
<!ENTITY % SMIL.ObjectLinking.module "INCLUDE">
<!ENTITY % SMIL.a.content "(%SMIL.timecontainer.class;|%SMIL.media-object;|
%SMIL.content-control;)*">
<!ENTITY % SMIL.area.content "(%SMIL.animate.qname;| %SMIL.set.qname;)*">
<!ENTITY % SMIL.anchor.content "(%SMIL.animate.qname; | %SMIL.set.qname;)*">
<!ENTITY % SMIL.a.attrib "%SMIL.smil-basictime.attrib; %SMIL.Test.attrib; %SMIL.customTestAttr.attrib;">
<!ENTITY % SMIL.area.attrib "%SMIL.smil-basictime.attrib; %SMIL.content-control-attrs;">
<!ENTITY % SMIL.anchor.attrib "%SMIL.smil-basictime.attrib; %SMIL.content-control-attrs;">
<!-- ================== Media ============================================ -->
<!ENTITY % SMIL.BasicMedia.module "INCLUDE">
<!ENTITY % SMIL.MediaClipping.module "INCLUDE">
<!ENTITY % SMIL.MediaClipping.deprecated.module "INCLUDE">
<!ENTITY % SMIL.MediaClipMarkers.module "INCLUDE">
<!ENTITY % SMIL.MediaParam.module "INCLUDE">
<!ENTITY % SMIL.BrushMedia.module "INCLUDE">
<!ENTITY % SMIL.MediaAccessibility.module "INCLUDE">
<!ENTITY % SMIL.media-object.content "(%SMIL.animation.elements;
| %SMIL.switch.qname;
| %SMIL.anchor.qname;
| %SMIL.area.qname;
| %SMIL.param.qname;)*">
<!ENTITY % SMIL.media-object.attrib "
%SMIL.BasicInlineTiming.attrib;
%SMIL.BasicInlineTiming-deprecated.attrib;
%SMIL.MinMaxTiming.attrib;
%SMIL.RestartTiming.attrib;
%SMIL.RestartDefaultTiming.attrib;
%SMIL.SyncBehavior.attrib;
%SMIL.SyncBehaviorDefault.attrib;
%SMIL.endsync.media.attrib;
%SMIL.fill.attrib;
%SMIL.fillDefault.attrib;
%SMIL.Test.attrib;
%SMIL.customTestAttr.attrib;
%SMIL.regionAttr.attrib;
%SMIL.Transition.attrib;
%SMIL.backgroundColor.attrib;
%SMIL.backgroundColor-deprecated.attrib;
%SMIL.Sub-region.attrib;
%SMIL.RegistrationPoint.attrib;
%SMIL.fit.attrib;
%SMIL.tabindex.attrib;
%SMIL.MediaObject.attrib;
">
<!ENTITY % SMIL.brush.attrib "%SMIL.skip-content.attrib;">
<!ENTITY % SMIL.param.attrib "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.paramGroup.attrib "%SMIL.skip-content.attrib;">
<!-- ================== Metadata ========================================== -->
<!ENTITY % SMIL.meta.content "EMPTY">
<!ENTITY % SMIL.meta.attrib "%SMIL.skip-content.attrib;">
<!ENTITY % SMIL.metadata.content "EMPTY">
<!ENTITY % SMIL.metadata.attrib "%SMIL.skip-content.attrib;">
<!-- ================== Structure ========================================= -->
<!ENTITY % SMIL.Structure.module "INCLUDE">
<!ENTITY % SMIL.smil.content "(%SMIL.head.qname;?,%SMIL.body.qname;?)">
<!ENTITY % SMIL.head.content "(
%SMIL.meta.qname;*,
((%SMIL.head-control.content;), %SMIL.meta.qname;*)?,
((%SMIL.head-meta.content;), %SMIL.meta.qname;*)?,
((%SMIL.head-layout.content;), %SMIL.meta.qname;*)?,
((%SMIL.head-transition.content;),%SMIL.meta.qname;*)?,
((%SMIL.head-media.content;), %SMIL.meta.qname;*)?
)">
<!ENTITY % SMIL.body.content "(%SMIL.timecontainer.class;|%SMIL.media-object;|
%SMIL.content-control;|a)*">
<!ENTITY % SMIL.smil.attrib "%SMIL.Test.attrib;">
<!ENTITY % SMIL.body.attrib "
%SMIL.timecontainer.attrib;
%SMIL.Description.attrib;
%SMIL.fill.attrib;
">
<!-- ================== Transitions ======================================= -->
<!ENTITY % SMIL.BasicTransitions.module "INCLUDE">
<!ENTITY % SMIL.TransitionModifiers.module "INCLUDE">
<!ENTITY % SMIL.InlineTransitions.module "IGNORE">
<!ENTITY % SMIL.FullScreenTransitionEffects.module "INCLUDE">
<!ENTITY % SMIL.transition.content "EMPTY">
<!ENTITY % SMIL.transition.attrib "%SMIL.content-control-attrs;">
<!-- ================== Timing ============================================ -->
<!ENTITY % SMIL.BasicInlineTiming.module "INCLUDE">
<!ENTITY % SMIL.SyncbaseTiming.module "INCLUDE">
<!ENTITY % SMIL.EventTiming.module "INCLUDE">
<!ENTITY % SMIL.WallclockTiming.module "INCLUDE">
<!ENTITY % SMIL.MultiArcTiming.module "INCLUDE">
<!ENTITY % SMIL.MediaMarkerTiming.module "INCLUDE">
<!ENTITY % SMIL.MinMaxTiming.module "INCLUDE">
<!ENTITY % SMIL.BasicTimeContainers.module "INCLUDE">
<!ENTITY % SMIL.BasicExclTimeContainers.module "INCLUDE">
<!ENTITY % SMIL.BasicPriorityClassContainers.module "INCLUDE">
<!ENTITY % SMIL.PrevTiming.module "INCLUDE">
<!ENTITY % SMIL.RestartTiming.module "INCLUDE">
<!ENTITY % SMIL.SyncBehavior.module "INCLUDE">
<!ENTITY % SMIL.SyncBehaviorDefault.module "INCLUDE">
<!ENTITY % SMIL.RestartDefault.module "INCLUDE">
<!ENTITY % SMIL.fillDefault.module "INCLUDE">
<!ENTITY % SMIL.par.attrib "
%SMIL.endsync.attrib;
%SMIL.fill.attrib;
%SMIL.timecontainer.attrib;
%SMIL.Test.attrib;
%SMIL.customTestAttr.attrib;
%SMIL.regionAttr.attrib;
">
<!ENTITY % SMIL.seq.attrib "
%SMIL.fill.attrib;
%SMIL.timecontainer.attrib;
%SMIL.Test.attrib;
%SMIL.customTestAttr.attrib;
%SMIL.regionAttr.attrib;
">
<!ENTITY % SMIL.excl.attrib "
%SMIL.endsync.attrib;
%SMIL.fill.attrib;
%SMIL.timecontainer.attrib;
%SMIL.Test.attrib;
%SMIL.customTestAttr.attrib;
%SMIL.regionAttr.attrib;
%SMIL.skip-content.attrib;
">
<!ENTITY % SMIL.par.content "(%SMIL.timecontainer.content;)*">
<!ENTITY % SMIL.seq.content "(%SMIL.timecontainer.content;)*">
<!ENTITY % SMIL.excl.content "((%SMIL.timecontainer.content;)*
| %SMIL.priorityClass.qname;+)">
<!ENTITY % SMIL.priorityClass.attrib "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.priorityClass.content "(%SMIL.timecontainer.content;)*">
<!-- end of smil-language-profile-model-1.mod -->
<!-- ====================================================================== -->
<!-- SMIL 2.1 Document Model Module ======================================= -->
<!-- file: smil-model-extended-mobile-1.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Warner ten Kate, Jacco van Ossenbruggen, Aaron Cohen
Editor for SMIL 2.1: Sjoerd Mullender, CWI
1.1.2.5
2005/06/23 09:07:46
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Document Model 1.0//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/smil-mobile-profile-model-1.mod"
====================================================================== -->
<!--
This file defines the SMIL 2.1 Mobile Profile
Document Model. All attributes and content models are defined
in the second half of this file. We first start with some
utility definitions. These are mainly used to simplify the
use of Modules in the second part of the file.
-->
<!-- ================== Util: Head ======================================== -->
<!ENTITY % SMIL.head-meta.content "%SMIL.metadata.qname;">
<!ENTITY % SMIL.head-layout.content "%SMIL.layout.qname;
| %SMIL.switch.qname;">
<!ENTITY % SMIL.head-transition.content "%SMIL.transition.qname;+">
<!ENTITY % SMIL.head-media.content "%SMIL.paramGroup.qname;+">
<!--=================== Util: Body - Content Control ====================== -->
<!ENTITY % SMIL.content-control "%SMIL.switch.qname; | %SMIL.prefetch.qname;">
<!ENTITY % SMIL.content-control-attrs "%SMIL.Test.attrib;
%SMIL.skip-content.attrib;">
<!--=================== Util: Body - Media ========================= -->
<!ENTITY % SMIL.media-object "%SMIL.audio.qname;
| %SMIL.video.qname;
| %SMIL.animation.qname;
| %SMIL.text.qname;
| %SMIL.img.qname;
| %SMIL.textstream.qname;
| %SMIL.ref.qname;">
<!--=================== Util: Body - Timing =============================== -->
<!ENTITY % SMIL.BasicTimeContainers.class "%SMIL.par.qname;
| %SMIL.seq.qname;">
<!ENTITY % SMIL.timecontainer.class "%SMIL.BasicTimeContainers.class;">
<!ENTITY % SMIL.timecontainer.content "%SMIL.timecontainer.class;
| %SMIL.media-object;
| %SMIL.content-control;
| %SMIL.a.qname;">
<!ENTITY % SMIL.smil-basictime.attrib "
%SMIL.BasicInlineTiming.attrib;
%SMIL.BasicInlineTiming-deprecated.attrib;
%SMIL.MinMaxTiming.attrib;
">
<!ENTITY % SMIL.timecontainer.attrib "
%SMIL.BasicInlineTiming.attrib;
%SMIL.BasicInlineTiming-deprecated.attrib;
%SMIL.MinMaxTiming.attrib;
">
<!-- ====================================================================== -->
<!-- ====================================================================== -->
<!-- ====================================================================== -->
<!--
The actual content model and attribute definitions for each module
sections follow below.
-->
<!-- ================== Content Control =================================== -->
<!ENTITY % SMIL.BasicContentControl.module "INCLUDE">
<!ENTITY % SMIL.CustomTestAttributes.module "IGNORE">
<!ENTITY % SMIL.PrefetchControl.module "INCLUDE">
<!ENTITY % SMIL.skip-contentControl.module "INCLUDE">
<!ENTITY % SMIL.switch.content "((%SMIL.timecontainer.class;
| %SMIL.media-object;
| %SMIL.content-control;
| %SMIL.a.qname;
| %SMIL.area.qname;
| %SMIL.anchor.qname;)*
| %SMIL.layout.qname;*)">
<!ENTITY % SMIL.switch.attrib "%SMIL.Test.attrib;">
<!ENTITY % SMIL.prefetch.attrib "
%SMIL.timecontainer.attrib;
%SMIL.MediaClip.attrib;
%SMIL.MediaClip.attrib.deprecated;
%SMIL.Test.attrib;
%SMIL.skip-content.attrib;
">
<!-- ================== Layout ============================================ -->
<!ENTITY % SMIL.BasicLayout.module "INCLUDE">
<!ENTITY % SMIL.AudioLayout.module "INCLUDE">
<!ENTITY % SMIL.MultiWindowLayout.module "IGNORE">
<!ENTITY % SMIL.SubRegionLayout.module "IGNORE">
<!ENTITY % SMIL.AlignmentLayout.module "INCLUDE">
<!ENTITY % SMIL.OverrideLayout.module "IGNORE">
<!ENTITY % SMIL.BackgroundTilingLayout.module "INCLUDE">
<!ENTITY % SMIL.layout.content "(%SMIL.region.qname;
| %SMIL.root-layout.qname;
| %SMIL.regPoint.qname;)*">
<!ENTITY % SMIL.region.content "(%SMIL.region.qname;)*">
<!ENTITY % SMIL.rootlayout.content "EMPTY">
<!ENTITY % SMIL.regPoint.content "EMPTY">
<!ENTITY % SMIL.layout.attrib "%SMIL.Test.attrib;">
<!ENTITY % SMIL.rootlayout.attrib "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.region.attrib "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.regPoint.attrib "%SMIL.content-control-attrs;">
<!-- ================== Linking =========================================== -->
<!ENTITY % SMIL.LinkingAttributes.module "INCLUDE">
<!ENTITY % SMIL.BasicLinking.module "INCLUDE">
<!ENTITY % SMIL.ObjectLinking.module "IGNORE">
<!ENTITY % SMIL.a.content "(%SMIL.timecontainer.class;|%SMIL.media-object;|
%SMIL.content-control;)*">
<!ENTITY % SMIL.area.content "EMPTY">
<!ENTITY % SMIL.anchor.content "EMPTY">
<!ENTITY % SMIL.a.attrib "%SMIL.smil-basictime.attrib; %SMIL.Test.attrib;">
<!ENTITY % SMIL.area.attrib "%SMIL.smil-basictime.attrib; %SMIL.content-control-attrs;">
<!ENTITY % SMIL.anchor.attrib "%SMIL.smil-basictime.attrib; %SMIL.content-control-attrs;">
<!-- ================== Media ============================================ -->
<!ENTITY % SMIL.BasicMedia.module "INCLUDE">
<!ENTITY % SMIL.MediaClipping.module "INCLUDE">
<!ENTITY % SMIL.MediaClipping.deprecated.module "INCLUDE">
<!ENTITY % SMIL.MediaClipMarkers.module "IGNORE">
<!ENTITY % SMIL.MediaParam.module "INCLUDE">
<!ENTITY % SMIL.BrushMedia.module "IGNORE">
<!ENTITY % SMIL.MediaAccessibility.module "INCLUDE">
<!ENTITY % SMIL.media-object.content "(%SMIL.switch.qname;
| %SMIL.anchor.qname;
| %SMIL.area.qname;
| %SMIL.param.qname;)*">
<!ENTITY % SMIL.media-object.attrib "
%SMIL.BasicInlineTiming.attrib;
%SMIL.BasicInlineTiming-deprecated.attrib;
%SMIL.MinMaxTiming.attrib;
%SMIL.endsync.media.attrib;
%SMIL.fill.attrib;
%SMIL.Test.attrib;
%SMIL.regionAttr.attrib;
%SMIL.Transition.attrib;
%SMIL.backgroundColor.attrib;
%SMIL.backgroundColor-deprecated.attrib;
%SMIL.RegistrationPoint.attrib;
%SMIL.fit.attrib;
%SMIL.tabindex.attrib;
%SMIL.MediaObject.attrib;
">
<!ENTITY % SMIL.param.attrib "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.paramGroup.attrib "%SMIL.skip-content.attrib;">
<!-- ================== Metadata ========================================== -->
<!ENTITY % SMIL.meta.content "EMPTY">
<!ENTITY % SMIL.meta.attrib "%SMIL.skip-content.attrib;">
<!ENTITY % SMIL.metadata.content "EMPTY">
<!ENTITY % SMIL.metadata.attrib "%SMIL.skip-content.attrib;">
<!-- ================== Structure ========================================= -->
<!ENTITY % SMIL.Structure.module "INCLUDE">
<!ENTITY % SMIL.smil.content "(%SMIL.head.qname;?,%SMIL.body.qname;?)">
<!ENTITY % SMIL.head.content "(
%SMIL.meta.qname;*,
((%SMIL.head-meta.content;), %SMIL.meta.qname;*)?,
((%SMIL.head-layout.content;), %SMIL.meta.qname;*)?,
((%SMIL.head-transition.content;),%SMIL.meta.qname;*)?,
((%SMIL.head-media.content;), %SMIL.meta.qname;*)?
)">
<!ENTITY % SMIL.body.content "(%SMIL.timecontainer.class;|%SMIL.media-object;|
%SMIL.content-control;|a)*">
<!ENTITY % SMIL.smil.attrib "%SMIL.Test.attrib;">
<!ENTITY % SMIL.body.attrib "
%SMIL.timecontainer.attrib;
%SMIL.Description.attrib;
%SMIL.fill.attrib;
">
<!-- ================== Transitions ======================================= -->
<!ENTITY % SMIL.BasicTransitions.module "INCLUDE">
<!ENTITY % SMIL.TransitionModifiers.module "IGNORE">
<!ENTITY % SMIL.InlineTransitions.module "IGNORE">
<!ENTITY % SMIL.FullScreenTransitionEffects.module "INCLUDE">
<!ENTITY % SMIL.transition.content "EMPTY">
<!ENTITY % SMIL.transition.attrib "%SMIL.content-control-attrs;">
<!-- ================== Timing ============================================ -->
<!ENTITY % SMIL.BasicInlineTiming.module "INCLUDE">
<!ENTITY % SMIL.SyncbaseTiming.module "IGNORE">
<!ENTITY % SMIL.EventTiming.module "INCLUDE">
<!ENTITY % SMIL.WallclockTiming.module "IGNORE">
<!ENTITY % SMIL.MultiArcTiming.module "IGNORE">
<!ENTITY % SMIL.MediaMarkerTiming.module "IGNORE">
<!ENTITY % SMIL.MinMaxTiming.module "INCLUDE">
<!ENTITY % SMIL.BasicTimeContainers.module "INCLUDE">
<!ENTITY % SMIL.BasicExclTimeContainers.module "IGNORE">
<!ENTITY % SMIL.BasicPriorityClassContainers.module "IGNORE">
<!ENTITY % SMIL.PrevTiming.module "INCLUDE">
<!ENTITY % SMIL.RestartTiming.module "IGNORE">
<!ENTITY % SMIL.SyncBehavior.module "IGNORE">
<!ENTITY % SMIL.SyncBehaviorDefault.module "IGNORE">
<!ENTITY % SMIL.RestartDefault.module "IGNORE">
<!ENTITY % SMIL.fillDefault.module "IGNORE">
<!ENTITY % SMIL.par.attrib "
%SMIL.endsync.attrib;
%SMIL.fill.attrib;
%SMIL.timecontainer.attrib;
%SMIL.Test.attrib;
%SMIL.regionAttr.attrib;
">
<!ENTITY % SMIL.seq.attrib "
%SMIL.fill.attrib;
%SMIL.timecontainer.attrib;
%SMIL.Test.attrib;
%SMIL.regionAttr.attrib;
">
<!ENTITY % SMIL.par.content "(%SMIL.timecontainer.content;)*">
<!ENTITY % SMIL.seq.content "(%SMIL.timecontainer.content;)*">
<!-- end of smil-mobile-profile-model-1.mod -->
<!-- ====================================================================== -->
<!-- SMIL 2.1 Document Model Module ======================================= -->
<!-- file: smil-model-extended-mobile-1.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Warner ten Kate, Jacco van Ossenbruggen, Aaron Cohen
Editor for SMIL 2.1: Sjoerd Mullender, CWI
1.1.2.4
2005/06/23 09:07:46
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Document Model 1.0//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/smil-extended-mobile-profile-model-1.mod"
====================================================================== -->
<!--
This file defines the SMIL 2.1 Extended Mobile Profile
Document Model. All attributes and content models are defined
in the second half of this file. We first start with some
utility definitions. These are mainly used to simplify the
use of Modules in the second part of the file.
-->
<!-- ================== Util: Head ======================================== -->
<!ENTITY % SMIL.head-meta.content "%SMIL.metadata.qname;">
<!ENTITY % SMIL.head-layout.content "%SMIL.layout.qname;
| %SMIL.switch.qname;">
<!ENTITY % SMIL.head-transition.content "%SMIL.transition.qname;+">
<!ENTITY % SMIL.head-media.content "%SMIL.paramGroup.qname;+">
<!--=================== Util: Body - Content Control ====================== -->
<!ENTITY % SMIL.content-control "%SMIL.switch.qname; | %SMIL.prefetch.qname;">
<!ENTITY % SMIL.content-control-attrs "%SMIL.Test.attrib;
%SMIL.skip-content.attrib;">
<!--=================== Util: Body - Animation ========================= -->
<!ENTITY % SMIL.animation.elements "%SMIL.animate.qname;
| %SMIL.set.qname;
| %SMIL.animateMotion.qname;
| %SMIL.animateColor.qname;">
<!--=================== Util: Body - Media ========================= -->
<!ENTITY % SMIL.media-object "%SMIL.audio.qname;
| %SMIL.video.qname;
| %SMIL.animation.qname;
| %SMIL.text.qname;
| %SMIL.img.qname;
| %SMIL.textstream.qname;
| %SMIL.ref.qname;
| %SMIL.brush.qname;
| %SMIL.animation.elements;">
<!--=================== Util: Body - Timing =============================== -->
<!ENTITY % SMIL.BasicTimeContainers.class "%SMIL.par.qname;
| %SMIL.seq.qname;">
<!ENTITY % SMIL.ExclTimeContainers.class "%SMIL.excl.qname;">
<!ENTITY % SMIL.timecontainer.class "%SMIL.BasicTimeContainers.class;
|%SMIL.ExclTimeContainers.class;">
<!ENTITY % SMIL.timecontainer.content "%SMIL.timecontainer.class;
| %SMIL.media-object;
| %SMIL.content-control;
| %SMIL.a.qname;">
<!ENTITY % SMIL.smil-basictime.attrib "
%SMIL.BasicInlineTiming.attrib;
%SMIL.BasicInlineTiming-deprecated.attrib;
%SMIL.MinMaxTiming.attrib;
">
<!ENTITY % SMIL.timecontainer.attrib "
%SMIL.BasicInlineTiming.attrib;
%SMIL.BasicInlineTiming-deprecated.attrib;
%SMIL.MinMaxTiming.attrib;
">
<!-- ====================================================================== -->
<!-- ====================================================================== -->
<!-- ====================================================================== -->
<!--
The actual content model and attribute definitions for each module
sections follow below.
-->
<!-- ================== Content Control =================================== -->
<!ENTITY % SMIL.BasicContentControl.module "INCLUDE">
<!ENTITY % SMIL.CustomTestAttributes.module "IGNORE">
<!ENTITY % SMIL.PrefetchControl.module "INCLUDE">
<!ENTITY % SMIL.skip-contentControl.module "INCLUDE">
<!ENTITY % SMIL.switch.content "((%SMIL.timecontainer.class;
| %SMIL.media-object;
| %SMIL.content-control;
| %SMIL.a.qname;
| %SMIL.area.qname;
| %SMIL.anchor.qname;)*
| %SMIL.layout.qname;*)">
<!ENTITY % SMIL.switch.attrib "%SMIL.Test.attrib;">
<!ENTITY % SMIL.prefetch.attrib "
%SMIL.timecontainer.attrib;
%SMIL.MediaClip.attrib;
%SMIL.MediaClip.attrib.deprecated;
%SMIL.Test.attrib;
%SMIL.skip-content.attrib;
">
<!-- ================== Animation ========================================= -->
<!ENTITY % SMIL.BasicAnimation.module "INCLUDE">
<!-- choose targetElement or XLink: -->
<!ENTITY % SMIL.animation-targetElement "INCLUDE">
<!ENTITY % SMIL.animation-XLinkTarget "IGNORE">
<!ENTITY % SMIL.animate.content "EMPTY">
<!ENTITY % SMIL.animateColor.content "EMPTY">
<!ENTITY % SMIL.animateMotion.content "EMPTY">
<!ENTITY % SMIL.set.content "EMPTY">
<!ENTITY % SMIL.animate.attrib "%SMIL.skip-content.attrib;">
<!ENTITY % SMIL.animateColor.attrib "%SMIL.skip-content.attrib;">
<!ENTITY % SMIL.animateMotion.attrib "%SMIL.skip-content.attrib;">
<!ENTITY % SMIL.set.attrib "%SMIL.skip-content.attrib;">
<!-- ================== Layout ============================================ -->
<!ENTITY % SMIL.BasicLayout.module "INCLUDE">
<!ENTITY % SMIL.AudioLayout.module "INCLUDE">
<!ENTITY % SMIL.MultiWindowLayout.module "IGNORE">
<!ENTITY % SMIL.SubRegionLayout.module "INCLUDE">
<!ENTITY % SMIL.AlignmentLayout.module "INCLUDE">
<!ENTITY % SMIL.OverrideLayout.module "INCLUDE">
<!ENTITY % SMIL.BackgroundTilingLayout.module "INCLUDE">
<!ENTITY % SMIL.layout.content "(%SMIL.region.qname;
| %SMIL.root-layout.qname;
| %SMIL.regPoint.qname;)*">
<!ENTITY % SMIL.region.content "(%SMIL.region.qname;)*">
<!ENTITY % SMIL.rootlayout.content "EMPTY">
<!ENTITY % SMIL.regPoint.content "EMPTY">
<!ENTITY % SMIL.layout.attrib "%SMIL.Test.attrib;">
<!ENTITY % SMIL.rootlayout.attrib "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.region.attrib "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.regPoint.attrib "%SMIL.content-control-attrs;">
<!-- ================== Linking =========================================== -->
<!ENTITY % SMIL.LinkingAttributes.module "INCLUDE">
<!ENTITY % SMIL.BasicLinking.module "INCLUDE">
<!ENTITY % SMIL.ObjectLinking.module "IGNORE">
<!ENTITY % SMIL.a.content "(%SMIL.timecontainer.class;|%SMIL.media-object;|
%SMIL.content-control;)*">
<!ENTITY % SMIL.area.content "(%SMIL.animate.qname;| %SMIL.set.qname;)*">
<!ENTITY % SMIL.anchor.content "(%SMIL.animate.qname; | %SMIL.set.qname;)*">
<!ENTITY % SMIL.a.attrib "%SMIL.smil-basictime.attrib; %SMIL.Test.attrib;">
<!ENTITY % SMIL.area.attrib "%SMIL.smil-basictime.attrib; %SMIL.content-control-attrs;">
<!ENTITY % SMIL.anchor.attrib "%SMIL.smil-basictime.attrib; %SMIL.content-control-attrs;">
<!-- ================== Media ============================================ -->
<!ENTITY % SMIL.BasicMedia.module "INCLUDE">
<!ENTITY % SMIL.MediaClipping.module "INCLUDE">
<!ENTITY % SMIL.MediaClipping.deprecated.module "INCLUDE">
<!ENTITY % SMIL.MediaClipMarkers.module "IGNORE">
<!ENTITY % SMIL.MediaParam.module "INCLUDE">
<!ENTITY % SMIL.BrushMedia.module "INCLUDE">
<!ENTITY % SMIL.MediaAccessibility.module "INCLUDE">
<!ENTITY % SMIL.media-object.content "(%SMIL.animation.elements;
| %SMIL.switch.qname;
| %SMIL.anchor.qname;
| %SMIL.area.qname;
| %SMIL.param.qname;)*">
<!ENTITY % SMIL.media-object.attrib "
%SMIL.BasicInlineTiming.attrib;
%SMIL.BasicInlineTiming-deprecated.attrib;
%SMIL.MinMaxTiming.attrib;
%SMIL.endsync.media.attrib;
%SMIL.fill.attrib;
%SMIL.Test.attrib;
%SMIL.regionAttr.attrib;
%SMIL.Transition.attrib;
%SMIL.backgroundColor.attrib;
%SMIL.backgroundColor-deprecated.attrib;
%SMIL.Sub-region.attrib;
%SMIL.RegistrationPoint.attrib;
%SMIL.fit.attrib;
%SMIL.tabindex.attrib;
%SMIL.MediaObject.attrib;
">
<!ENTITY % SMIL.brush.attrib "%SMIL.skip-content.attrib;">
<!ENTITY % SMIL.param.attrib "%SMIL.content-control-attrs;">
<!ENTITY % SMIL.paramGroup.attrib "%SMIL.skip-content.attrib;">
<!-- ================== Metadata ========================================== -->
<!ENTITY % SMIL.meta.content "EMPTY">
<!ENTITY % SMIL.meta.attrib "%SMIL.skip-content.attrib;">
<!ENTITY % SMIL.metadata.content "EMPTY">
<!ENTITY % SMIL.metadata.attrib "%SMIL.skip-content.attrib;">
<!-- ================== Structure ========================================= -->
<!ENTITY % SMIL.Structure.module "INCLUDE">
<!ENTITY % SMIL.smil.content "(%SMIL.head.qname;?,%SMIL.body.qname;?)">
<!ENTITY % SMIL.head.content "(
%SMIL.meta.qname;*,
((%SMIL.head-meta.content;), %SMIL.meta.qname;*)?,
((%SMIL.head-layout.content;), %SMIL.meta.qname;*)?,
((%SMIL.head-transition.content;),%SMIL.meta.qname;*)?,
((%SMIL.head-media.content;), %SMIL.meta.qname;*)?
)">
<!ENTITY % SMIL.body.content "(%SMIL.timecontainer.class;|%SMIL.media-object;|
%SMIL.content-control;|a)*">
<!ENTITY % SMIL.smil.attrib "%SMIL.Test.attrib;">
<!ENTITY % SMIL.body.attrib "
%SMIL.timecontainer.attrib;
%SMIL.Description.attrib;
%SMIL.fill.attrib;
">
<!-- ================== Transitions ======================================= -->
<!ENTITY % SMIL.BasicTransitions.module "INCLUDE">
<!ENTITY % SMIL.TransitionModifiers.module "IGNORE">
<!ENTITY % SMIL.InlineTransitions.module "IGNORE">
<!ENTITY % SMIL.FullScreenTransitionEffects.module "INCLUDE">
<!ENTITY % SMIL.transition.content "EMPTY">
<!ENTITY % SMIL.transition.attrib "%SMIL.content-control-attrs;">
<!-- ================== Timing ============================================ -->
<!ENTITY % SMIL.BasicInlineTiming.module "INCLUDE">
<!ENTITY % SMIL.SyncbaseTiming.module "IGNORE">
<!ENTITY % SMIL.EventTiming.module "INCLUDE">
<!ENTITY % SMIL.WallclockTiming.module "IGNORE">
<!ENTITY % SMIL.MultiArcTiming.module "INCLUDE">
<!ENTITY % SMIL.MediaMarkerTiming.module "IGNORE">
<!ENTITY % SMIL.MinMaxTiming.module "INCLUDE">
<!ENTITY % SMIL.BasicTimeContainers.module "INCLUDE">
<!ENTITY % SMIL.BasicExclTimeContainers.module "INCLUDE">
<!ENTITY % SMIL.BasicPriorityClassContainers.module "IGNORE">
<!ENTITY % SMIL.PrevTiming.module "INCLUDE">
<!ENTITY % SMIL.RestartTiming.module "IGNORE">
<!ENTITY % SMIL.SyncBehavior.module "IGNORE">
<!ENTITY % SMIL.SyncBehaviorDefault.module "IGNORE">
<!ENTITY % SMIL.RestartDefault.module "IGNORE">
<!ENTITY % SMIL.fillDefault.module "IGNORE">
<!ENTITY % SMIL.par.attrib "
%SMIL.endsync.attrib;
%SMIL.fill.attrib;
%SMIL.timecontainer.attrib;
%SMIL.Test.attrib;
%SMIL.regionAttr.attrib;
">
<!ENTITY % SMIL.seq.attrib "
%SMIL.fill.attrib;
%SMIL.timecontainer.attrib;
%SMIL.Test.attrib;
%SMIL.regionAttr.attrib;
">
<!ENTITY % SMIL.excl.attrib "
%SMIL.endsync.attrib;
%SMIL.fill.attrib;
%SMIL.timecontainer.attrib;
%SMIL.Test.attrib;
%SMIL.regionAttr.attrib;
%SMIL.skip-content.attrib;
">
<!ENTITY % SMIL.par.content "(%SMIL.timecontainer.content;)*">
<!ENTITY % SMIL.seq.content "(%SMIL.timecontainer.content;)*">
<!ENTITY % SMIL.excl.content "(%SMIL.timecontainer.content;)*">
<!-- end of smil-extended-mobile-profile-model-1.mod -->
<!-- ....................................................................... -->
<!-- SMIL 2.1 DTD ......................................................... -->
<!-- file: SMIL21.dtd
-->
<!-- SMIL 2.1 DTD
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Jacco van Ossenbruggen
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This is the driver file for the SMIL 2.1 DTD.
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//DTD SMIL 2.1//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/SMIL21.dtd"
-->
<!ENTITY % NS.prefixed "IGNORE" >
<!ENTITY % SMIL.prefix "" >
<!-- Define the Content Model -->
<!ENTITY % smil-model.mod
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Document Model 1.0//EN"
"smil-language-profile-model-1.mod" >
<!-- Modular Framework Module ................................... -->
<!ENTITY % smil-framework.module "INCLUDE" >
<![%smil-framework.module;[
<!ENTITY % smil-framework.mod
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Modular Framework 1.0//EN"
"smil-framework-1.mod" >
%smil-framework.mod;]]>
<!-- The SMIL 2.1 Language Profile includes the following sections:
C. The SMIL Animation Module
D. The SMIL Content Control Module
G. The SMIL Layout Module
H. The SMIL Linking Module
I. The SMIL Media Object Module
J. The SMIL Metainformation Module
K. The SMIL Structure Module
L. The SMIL Timing and Synchronization Module
M. Integrating SMIL Timing into other XML-Based Languages
P. The SMIL Transition effects Module
-->
<!ENTITY % SMIL.anim-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Animation//EN"
"SMIL-anim.mod">
<!ENTITY % SMIL.control-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Content Control//EN"
"SMIL-control.mod">
<!ENTITY % SMIL.layout-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Layout//EN"
"SMIL-layout.mod">
<!ENTITY % SMIL.link-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Linking//EN"
"SMIL-link.mod">
<!ENTITY % SMIL.media-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Media Objects//EN"
"SMIL-media.mod">
<!ENTITY % SMIL.meta-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Metainformation//EN"
"SMIL-metainformation.mod">
<!ENTITY % SMIL.struct-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Structure//EN"
"SMIL-struct.mod">
<!ENTITY % SMIL.timing-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Timing//EN"
"SMIL-timing.mod">
<!ENTITY % SMIL.transition-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Transition//EN"
"SMIL-transition.mod">
%SMIL.struct-mod;
%SMIL.anim-mod;
%SMIL.control-mod;
%SMIL.meta-mod;
%SMIL.layout-mod;
%SMIL.link-mod;
%SMIL.media-mod;
%SMIL.timing-mod;
%SMIL.transition-mod;
<!-- end of SMIL21.dtd -->
<!-- ...................................................................... -->
<!-- SMIL 2.1 Mobile Profile DTD ......................................... -->
<!-- file: SMIL21Mobile.dtd -->
<!-- SMIL 2.1 Mobile Profile DTD
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Jacco van Ossenbruggen
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This is the driver file for the SMIL 2.1 Mobile Profile DTD.
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//DTD SMIL 2.1 Mobile//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/SMIL21Mobile.dtd"
-->
<!ENTITY % NS.prefixed "IGNORE" >
<!ENTITY % SMIL.prefix "" >
<!-- Define the Content Model -->
<!ENTITY % smil-model.mod
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Document Model 1.0//EN"
"smil-mobile-profile-model-1.mod" >
<!-- Modular Framework Module ................................... -->
<!ENTITY % smil-framework.module "INCLUDE" >
<![%smil-framework.module;[
<!ENTITY % smil-framework.mod
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Modular Framework 1.0//EN"
"smil-framework-1.mod" >
%smil-framework.mod;]]>
<!-- The SMIL 2.1 Mobile Profile includes the following sections:
D. The SMIL Content Control Module
G. The SMIL Layout Module
H. The SMIL Linking Module
I. The SMIL Media Object Module
J. The SMIL Metainformation Module
K. The SMIL Structure Module
L. The SMIL Timing and Synchronization Module
M. Integrating SMIL Timing into other XML-Based Languages
P. The SMIL Transition effects Module
-->
<!ENTITY % SMIL.control-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Content Control//EN"
"SMIL-control.mod">
<!ENTITY % SMIL.layout-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Layout//EN"
"SMIL-layout.mod">
<!ENTITY % SMIL.link-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Linking//EN"
"SMIL-link.mod">
<!ENTITY % SMIL.media-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Media Objects//EN"
"SMIL-media.mod">
<!ENTITY % SMIL.meta-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Metainformation//EN"
"SMIL-metainformation.mod">
<!ENTITY % SMIL.struct-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Structure//EN"
"SMIL-struct.mod">
<!ENTITY % SMIL.timing-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Timing//EN"
"SMIL-timing.mod">
<!ENTITY % SMIL.transition-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Transition//EN"
"SMIL-transition.mod">
%SMIL.struct-mod;
%SMIL.control-mod;
%SMIL.meta-mod;
%SMIL.layout-mod;
%SMIL.link-mod;
%SMIL.media-mod;
%SMIL.timing-mod;
%SMIL.transition-mod;
<!-- end of SMIL21Mobile.dtd -->
<!-- ...................................................................... -->
<!-- SMIL 2.1 Extended Mobile Profile DTD ................................ -->
<!-- file: SMIL21ExtendedMobile.dtd -->
<!-- SMIL 2.1 Extended Mobile Profile DTD
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Jacco van Ossenbruggen
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This is the driver file for the SMIL 2.1 Extended Mobile Profile DTD.
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//DTD SMIL 2.1 Extended Mobile//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/SMIL21ExtendedMobile.dtd"
-->
<!ENTITY % NS.prefixed "IGNORE" >
<!ENTITY % SMIL.prefix "" >
<!-- Define the Content Model -->
<!ENTITY % smil-model.mod
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Document Model 1.0//EN"
"smil-extended-mobile-profile-model-1.mod" >
<!-- Modular Framework Module ................................... -->
<!ENTITY % smil-framework.module "INCLUDE" >
<![%smil-framework.module;[
<!ENTITY % smil-framework.mod
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Modular Framework 1.0//EN"
"smil-framework-1.mod" >
%smil-framework.mod;]]>
<!-- The SMIL 2.1 Extended Mobile Profile includes the following sections:
C. The SMIL Animation Module
D. The SMIL Content Control Module
G. The SMIL Layout Module
H. The SMIL Linking Module
I. The SMIL Media Object Module
J. The SMIL Metainformation Module
K. The SMIL Structure Module
L. The SMIL Timing and Synchronization Module
M. Integrating SMIL Timing into other XML-Based Languages
P. The SMIL Transition effects Module
-->
<!ENTITY % SMIL.anim-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Animation//EN"
"SMIL-anim.mod">
<!ENTITY % SMIL.control-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Content Control//EN"
"SMIL-control.mod">
<!ENTITY % SMIL.layout-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Layout//EN"
"SMIL-layout.mod">
<!ENTITY % SMIL.link-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Linking//EN"
"SMIL-link.mod">
<!ENTITY % SMIL.media-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Media Objects//EN"
"SMIL-media.mod">
<!ENTITY % SMIL.meta-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Metainformation//EN"
"SMIL-metainformation.mod">
<!ENTITY % SMIL.struct-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Document Structure//EN"
"SMIL-struct.mod">
<!ENTITY % SMIL.timing-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Timing//EN"
"SMIL-timing.mod">
<!ENTITY % SMIL.transition-mod
PUBLIC "-//W3C//ELEMENTS SMIL 2.1 Transition//EN"
"SMIL-transition.mod">
%SMIL.struct-mod;
%SMIL.anim-mod;
%SMIL.control-mod;
%SMIL.meta-mod;
%SMIL.layout-mod;
%SMIL.link-mod;
%SMIL.media-mod;
%SMIL.timing-mod;
%SMIL.transition-mod;
<!-- end of SMIL21ExtendedMobile.dtd -->
<!-- ...................................................................... -->
<!-- SMIL 2.1 Datatypes Module ........................................... -->
<!-- file: smil-datatypes-1.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Jacco van Ossenbruggen
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Datatypes 1.0//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/smil-datatypes-1.mod"
....................................................................... -->
<!-- Datatypes
defines containers for the following datatypes, many of
these imported from other specifications and standards.
-->
<!ENTITY % Character.datatype "CDATA">
<!-- a single character from [ISO10646] -->
<!ENTITY % ContentType.datatype "CDATA">
<!-- media type, as per [RFC2045] -->
<!ENTITY % LanguageCode.datatype "CDATA">
<!-- a language code, as per [RFC3066] -->
<!ENTITY % LanguageCodes.datatype "CDATA">
<!-- comma-separated list of language codes, as per [RFC3066] -->
<!ENTITY % Number.datatype "CDATA">
<!-- one or more digits -->
<!ENTITY % Script.datatype "CDATA">
<!-- script expression -->
<!ENTITY % Text.datatype "CDATA">
<!-- used for titles etc. -->
<!ENTITY % TimeValue.datatype "CDATA">
<!-- a Number, possibly with its dimension, or a reserved
word like 'indefinite' -->
<!ENTITY % URI.datatype "CDATA" >
<!-- used for URI references -->
<!-- end of smil-datatypes-1.mod -->
<!-- ...................................................................... -->
<!-- SMIL 2.1 Common Attributes Module ................................... -->
<!-- file: smil-attribs-1.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Common Attributes 1.0//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/smil-attribs-1.mod"
...................................................................... -->
<!-- Common Attributes
This module declares the common attributes for the SMIL DTD Modules.
-->
<!ENTITY % SMIL.pfx "">
<!ENTITY % id.attrib
"%SMIL.pfx;id ID #IMPLIED"
>
<!ENTITY % class.attrib
"%SMIL.pfx;class CDATA #IMPLIED"
>
<!ENTITY % title.attrib
"%SMIL.pfx;title %Text.datatype; #IMPLIED"
>
<!ENTITY % longdesc.attrib
"%SMIL.pfx;longdesc %URI.datatype; #IMPLIED"
>
<!ENTITY % alt.attrib
"%SMIL.pfx;alt %Text.datatype; #IMPLIED"
>
<!ENTITY % SMIL.Accessibility.attrib "
%longdesc.attrib;
%alt.attrib;
">
<!ENTITY % Core.extra.attrib "" >
<!ENTITY % Core.attrib "
xml:base %URI.datatype; #IMPLIED
%id.attrib;
%class.attrib;
%title.attrib;
%SMIL.Accessibility.attrib;
%Core.extra.attrib;
">
<!ENTITY % I18n.extra.attrib "" >
<!ENTITY % I18n.attrib "
xml:lang %LanguageCode.datatype; #IMPLIED
%I18n.extra.attrib;"
>
<!ENTITY % SMIL.Description.attrib "
%SMIL.pfx;abstract %Text.datatype; #IMPLIED
%SMIL.pfx;author %Text.datatype; #IMPLIED
%SMIL.pfx;copyright %Text.datatype; #IMPLIED
">
<!ENTITY % SMIL.tabindex.attrib "
%SMIL.pfx;tabindex %Number.datatype; #IMPLIED
">
<!-- ================== BasicLayout ======================================= -->
<!ENTITY % SMIL.regionAttr.attrib "
%SMIL.pfx;region CDATA #IMPLIED
">
<!-- ================== OverrideLayout ==================================== -->
<!ENTITY % SMIL.backgroundColor.attrib "
%SMIL.pfx;backgroundColor CDATA #IMPLIED
">
<!ENTITY % SMIL.backgroundColor-deprecated.attrib "
%SMIL.pfx;background-color CDATA #IMPLIED
">
<!ENTITY % SMIL.Sub-region.attrib "
%SMIL.pfx;top CDATA 'auto'
%SMIL.pfx;bottom CDATA 'auto'
%SMIL.pfx;left CDATA 'auto'
%SMIL.pfx;right CDATA 'auto'
%SMIL.pfx;height CDATA 'auto'
%SMIL.pfx;width CDATA 'auto'
%SMIL.pfx;z-index CDATA #IMPLIED
">
<!ENTITY % SMIL.fit.attrib "
%SMIL.pfx;fit (hidden|fill|meet|meetBest|scroll|slice) #IMPLIED
">
<!-- ================== BackgroundTilingLayout ============================ -->
<!ENTITY % SMIL.backgroundImage.attrib "
%SMIL.pfx;backgroundImage %URI.datatype; 'none'
">
<!ENTITY % SMIL.backgroundRepeat.attrib "
%SMIL.pfx;backgroundRepeat (repeat|repeatX|repeatY|noRepeat|inherit) 'repeat'
">
<!-- ================ Registration Point attribute for media elements ===== -->
<!-- integrating language using AlignmentLayout must include regPoint -->
<!-- attribute on media elements for regPoint elements to be useful -->
<!ENTITY % SMIL.regPointAttr.attrib "
%SMIL.pfx;regPoint CDATA #IMPLIED
">
<!ENTITY % SMIL.regAlign.attrib "
%SMIL.pfx;regAlign (topLeft|topMid|topRight|midLeft|center|
midRight|bottomLeft|bottomMid|bottomRight) #IMPLIED
">
<!ENTITY % SMIL.mediaAlign.attrib "
%SMIL.pfx;mediaAlign (topLeft|topMid|topRight|midLeft|center|
midRight|bottomLeft|bottomMid|bottomRight) #IMPLIED
">
<!ENTITY % SMIL.soundAlign.attrib "
%SMIL.pfx;soundAlign (left|both|right) #IMPLIED
">
<!ENTITY % SMIL.RegistrationPoint.attrib "
%SMIL.regPointAttr.attrib;
%SMIL.regAlign.attrib;
%SMIL.mediaAlign.attrib;
">
<!--=================== Content Control =======================-->
<!-- customTest Attribute, do not confuse with customTest element! -->
<!ENTITY % SMIL.customTestAttr.attrib "
%SMIL.pfx;customTest CDATA #IMPLIED
">
<!-- ========================= SkipContentControl Module ================== -->
<!ENTITY % SMIL.skip-content.attrib "
%SMIL.pfx;skip-content (true|false) 'true'
">
<!-- Content Control Test Attributes -->
<!ENTITY % SMIL.Test.attrib "
%SMIL.pfx;systemBitrate CDATA #IMPLIED
%SMIL.pfx;systemCaptions (on|off) #IMPLIED
%SMIL.pfx;systemLanguage CDATA #IMPLIED
%SMIL.pfx;systemOverdubOrSubtitle (overdub|subtitle) #IMPLIED
%SMIL.pfx;systemRequired CDATA #IMPLIED
%SMIL.pfx;systemScreenSize CDATA #IMPLIED
%SMIL.pfx;systemScreenDepth CDATA #IMPLIED
%SMIL.pfx;systemAudioDesc (on|off) #IMPLIED
%SMIL.pfx;systemOperatingSystem NMTOKEN #IMPLIED
%SMIL.pfx;systemCPU NMTOKEN #IMPLIED
%SMIL.pfx;systemComponent CDATA #IMPLIED
%SMIL.pfx;system-bitrate CDATA #IMPLIED
%SMIL.pfx;system-captions (on|off) #IMPLIED
%SMIL.pfx;system-language CDATA #IMPLIED
%SMIL.pfx;system-overdub-or-caption (overdub|caption) #IMPLIED
%SMIL.pfx;system-required CDATA #IMPLIED
%SMIL.pfx;system-screen-size CDATA #IMPLIED
%SMIL.pfx;system-screen-depth CDATA #IMPLIED
">
<!-- SMIL Animation Module =============================================== -->
<!ENTITY % SMIL.BasicAnimation.attrib "
%SMIL.pfx;values CDATA #IMPLIED
%SMIL.pfx;from CDATA #IMPLIED
%SMIL.pfx;to CDATA #IMPLIED
%SMIL.pfx;by CDATA #IMPLIED
">
<!-- SMIL Timing Module ================================================== -->
<!ENTITY % SMIL.BasicInlineTiming.attrib "
%SMIL.pfx;dur %TimeValue.datatype; #IMPLIED
%SMIL.pfx;repeatCount %TimeValue.datatype; #IMPLIED
%SMIL.pfx;repeatDur %TimeValue.datatype; #IMPLIED
%SMIL.pfx;begin %TimeValue.datatype; #IMPLIED
%SMIL.pfx;end %TimeValue.datatype; #IMPLIED
">
<!ENTITY % SMIL.MinMaxTiming.attrib "
%SMIL.pfx;min %TimeValue.datatype; '0'
%SMIL.pfx;max %TimeValue.datatype; 'indefinite'
">
<!ENTITY % SMIL.BasicInlineTiming-deprecated.attrib "
%SMIL.pfx;repeat %TimeValue.datatype; #IMPLIED
">
<!ENTITY % SMIL.fill.attrib "
%SMIL.pfx;fill (remove|freeze|hold|transition|auto|default) 'default'
">
<!ENTITY % SMIL.fillDefault.attrib "
%SMIL.pfx;fillDefault (remove|freeze|hold|transition|auto|inherit) 'inherit'
">
<!ENTITY % SMIL.endsync.attrib "
%SMIL.pfx;endsync CDATA 'last'
">
<!-- endsync has a different default when applied to media elements -->
<!ENTITY % SMIL.endsync.media.attrib "
%SMIL.pfx;endsync CDATA 'media'
">
<!ENTITY % SMIL.TimeContainerAttributes.attrib "
%SMIL.pfx;timeAction CDATA #IMPLIED
%SMIL.pfx;timeContainer CDATA #IMPLIED
">
<!ENTITY % SMIL.RestartTiming.attrib "
%SMIL.pfx;restart (always|whenNotActive|never|default) 'default'
">
<!ENTITY % SMIL.RestartDefaultTiming.attrib "
%SMIL.pfx;restartDefault (inherit|always|never|whenNotActive) 'inherit'
">
<!ENTITY % SMIL.SyncBehavior.attrib "
%SMIL.pfx;syncBehavior (canSlip|locked|independent|default) 'default'
%SMIL.pfx;syncTolerance %TimeValue.datatype; 'default'
">
<!ENTITY % SMIL.SyncBehaviorDefault.attrib "
%SMIL.pfx;syncBehaviorDefault (canSlip|locked|independent|inherit) 'inherit'
%SMIL.pfx;syncToleranceDefault %TimeValue.datatype; 'inherit'
">
<!ENTITY % SMIL.SyncMaster.attrib "
%SMIL.pfx;syncMaster (true|false) 'false'
">
<!-- ================== Time Manipulations ================================ -->
<!ENTITY % SMIL.TimeManipulations.attrib "
%SMIL.pfx;accelerate %Number.datatype; '0'
%SMIL.pfx;decelerate %Number.datatype; '0'
%SMIL.pfx;speed %Number.datatype; '1.0'
%SMIL.pfx;autoReverse (true|false) 'false'
">
<!-- ================== Media Objects ===================================== -->
<!ENTITY % SMIL.MediaClip.attrib "
%SMIL.pfx;clipBegin CDATA #IMPLIED
%SMIL.pfx;clipEnd CDATA #IMPLIED
">
<!ENTITY % SMIL.MediaClip.attrib.deprecated "
%SMIL.pfx;clip-begin CDATA #IMPLIED
%SMIL.pfx;clip-end CDATA #IMPLIED
">
<!ENTITY % SMIL.MediaObject.attrib "
%SMIL.pfx;paramGroup NMTOKEN #IMPLIED
">
<!-- ================== Streaming Media =================================== -->
<!ENTITY % SMIL.Streaming-media.attrib "
%SMIL.pfx;port CDATA #IMPLIED
%SMIL.pfx;rtpformat CDATA #IMPLIED
%SMIL.pfx;transport CDATA #IMPLIED
">
<!ENTITY % SMIL.Streaming-timecontainer.attrib "
%SMIL.pfx;control CDATA #IMPLIED
">
<!-- ================== Transitions Media ================================= -->
<!ENTITY % SMIL.Transition.attrib "
%SMIL.pfx;transIn CDATA #IMPLIED
%SMIL.pfx;transOut CDATA #IMPLIED
">
<!-- end of smil-attribs-1.mod -->
<!-- ....................................................................... -->
<!-- SMIL Qualified Names Module .......................................... -->
<!-- file: smil-qname-1.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ENTITIES SMIL Qualified Names 1.0//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/smil-qname-1.mod"
....................................................................... -->
<!-- SMIL Qualified Names
This module is contained in two parts, labeled Section 'A' and 'B':
Section A declares parameter entities to support namespace-
qualified names, namespace declarations, and name prefixing
for SMIL and extensions.
Section B declares parameter entities used to provide
namespace-qualified names for all SMIL element types:
%SMIL.animation.qname; the xmlns-qualified name for <animation>
%SMIL.video.qname; the xmlns-qualified name for <video>
...
SMIL extensions would create a module similar to this one,
using the '%smil-qname-extra.mod;' parameter entity to insert
it within Section A. A template module suitable for this purpose
('template-qname-1.mod') is included in the XHTML distribution.
-->
<!-- Section A: SMIL XML Namespace Framework :::::::::::::::::::: -->
<!-- 1. Declare the two parameter entities used to support XLink,
first the parameter entity container for the URI used to
identify the XLink namespace:
-->
<!ENTITY % XLINK.xmlns "http://www.w3.org/1999/xlink" >
<!-- This contains the XLink namespace declaration attribute.
-->
<!ENTITY % XLINK.xmlns.attrib
"xmlns:xlink %URI.datatype; #FIXED '%XLINK.xmlns;'"
>
<!-- 2. Declare parameter entities (e.g., %SMIL.xmlns;) containing
the namespace URI for the SMIL namespace, and any namespaces
included by SMIL:
-->
<!ENTITY % SMIL.xmlns "http://www.w3.org/2005/SMIL21/" >
<!-- 3. Declare parameter entities (e.g., %SMIL.prefix;) containing
the default namespace prefix string(s) to use when prefixing
is enabled. This may be overridden in the DTD driver or the
internal subset of a document instance.
NOTE: As specified in [XMLNAMES], the namespace prefix serves
as a proxy for the URI reference, and is not in itself significant.
-->
<!ENTITY % SMIL.prefix "" >
<!-- 4. Declare a %SMIL.prefixed; conditional section keyword, used
to activate namespace prefixing. The default value should
inherit '%NS.prefixed;' from the DTD driver, so that unless
overridden, the default behaviour follows the overall DTD
prefixing scheme.
-->
<!ENTITY % NS.prefixed "IGNORE" >
<!ENTITY % SMIL.prefixed "%NS.prefixed;" >
<!-- 5. Declare parameter entities (e.g., %SMIL.pfx;) containing the
colonized prefix(es) (e.g., '%SMIL.prefix;:') used when
prefixing is active, an empty string when it is not.
-->
<![%SMIL.prefixed;[
<!ENTITY % SMIL.pfx "%SMIL.prefix;:" >
<!ENTITY % SMIL.xmlns.extra.attrib
"xmlns:%SMIL.prefix; %URI.datatype; #FIXED '%SMIL.xmlns;'" >
]]>
<!ENTITY % SMIL.pfx "" >
<!ENTITY % SMIL.xmlns.extra.attrib "" >
<!-- declare qualified name extensions here -->
<!ENTITY % smil-qname-extra.mod "" >
%smil-qname-extra.mod;
<!-- 6. The parameter entity %SMIL.xmlns.extra.attrib; may be
redeclared to contain any non-SMIL namespace declaration
attributes for namespaces embedded in SMIL. The default
is an empty string. XLink should be included here if used
in the DTD and not already included by a previously-declared
%*.xmlns.extra.attrib;.
-->
<!-- 7. The parameter entity %NS.prefixed.attrib; is defined to be
the prefix for SMIL elements if any and whatever is in
SMIL.xmlns.extra.attrib.
-->
<!ENTITY % XHTML.xmlns.extra.attrib "%SMIL.xmlns.extra.attrib;" >
<!-- Section B: SMIL Qualified Names ::::::::::::::::::::::::::::: -->
<!-- This section declares parameter entities used to provide
namespace-qualified names for all SMIL element types.
-->
<!ENTITY % SMIL.animate.qname "%SMIL.pfx;animate" >
<!ENTITY % SMIL.set.qname "%SMIL.pfx;set" >
<!ENTITY % SMIL.animateMotion.qname "%SMIL.pfx;animateMotion" >
<!ENTITY % SMIL.animateColor.qname "%SMIL.pfx;animateColor" >
<!ENTITY % SMIL.switch.qname "%SMIL.pfx;switch" >
<!ENTITY % SMIL.customTest.qname "%SMIL.pfx;customTest" >
<!ENTITY % SMIL.customAttributes.qname "%SMIL.pfx;customAttributes" >
<!ENTITY % SMIL.prefetch.qname "%SMIL.pfx;prefetch" >
<!ENTITY % SMIL.layout.qname "%SMIL.pfx;layout" >
<!ENTITY % SMIL.region.qname "%SMIL.pfx;region" >
<!ENTITY % SMIL.root-layout.qname "%SMIL.pfx;root-layout" >
<!ENTITY % SMIL.topLayout.qname "%SMIL.pfx;topLayout" >
<!ENTITY % SMIL.regPoint.qname "%SMIL.pfx;regPoint" >
<!ENTITY % SMIL.a.qname "%SMIL.pfx;a" >
<!ENTITY % SMIL.area.qname "%SMIL.pfx;area" >
<!ENTITY % SMIL.anchor.qname "%SMIL.pfx;anchor" >
<!ENTITY % SMIL.ref.qname "%SMIL.pfx;ref" >
<!ENTITY % SMIL.audio.qname "%SMIL.pfx;audio" >
<!ENTITY % SMIL.img.qname "%SMIL.pfx;img" >
<!ENTITY % SMIL.video.qname "%SMIL.pfx;video" >
<!ENTITY % SMIL.text.qname "%SMIL.pfx;text" >
<!ENTITY % SMIL.textstream.qname "%SMIL.pfx;textstream" >
<!ENTITY % SMIL.animation.qname "%SMIL.pfx;animation" >
<!ENTITY % SMIL.param.qname "%SMIL.pfx;param" >
<!ENTITY % SMIL.paramGroup.qname "%SMIL.pfx;paramGroup" >
<!ENTITY % SMIL.brush.qname "%SMIL.pfx;brush" >
<!ENTITY % SMIL.meta.qname "%SMIL.pfx;meta" >
<!ENTITY % SMIL.metadata.qname "%SMIL.pfx;metadata" >
<!ENTITY % SMIL.smil.qname "%SMIL.pfx;smil" >
<!ENTITY % SMIL.head.qname "%SMIL.pfx;head" >
<!ENTITY % SMIL.body.qname "%SMIL.pfx;body" >
<!ENTITY % SMIL.seq.qname "%SMIL.pfx;seq" >
<!ENTITY % SMIL.par.qname "%SMIL.pfx;par" >
<!ENTITY % SMIL.excl.qname "%SMIL.pfx;excl" >
<!ENTITY % SMIL.priorityClass.qname "%SMIL.pfx;priorityClass">
<!ENTITY % SMIL.transition.qname "%SMIL.pfx;transition" >
<!ENTITY % SMIL.transitionFilter.qname "%SMIL.pfx;transitionFilter" >
<!-- end of smil-qname-1.mod -->
<!-- ...................................................................... -->
<!-- SMIL 2.1 Modular Framework Module ................................... -->
<!-- file: smil-framework-1.mod
This is SMIL 2.1.
Copyright: 1998-2005 W3C (MIT, ERCIM, Keio), All Rights
Reserved. See http://www.w3.org/Consortium/Legal/.
Author: Jacco van Ossenbruggen
Editor for SMIL 2.1: Sjoerd Mullender, CWI
$Revision: 1.6 $
$Date: 2005/12/13 10:43:47 $
This DTD module is identified by the PUBLIC and SYSTEM identifiers:
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Modular Framework 1.0//EN"
SYSTEM "http://www.w3.org/2005/SMIL21/smil-framework-1.mod"
....................................................................... -->
<!-- Modular Framework
This required module instantiates the modules needed
to support the SMIL 2.1 modularization model, including:
+ datatypes
+ namespace-qualified names
+ common attributes
+ document model
-->
<!ENTITY % smil-datatypes.module "INCLUDE" >
<![%smil-datatypes.module;[
<!ENTITY % smil-datatypes.mod
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Datatypes 1.0//EN"
"smil-datatypes-1.mod" >
%smil-datatypes.mod;]]>
<!ENTITY % smil-qname.module "INCLUDE" >
<![%smil-qname.module;[
<!ENTITY % smil-qname.mod
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Qualified Names 1.0//EN"
"smil-qname-1.mod" >
%smil-qname.mod;]]>
<!ENTITY % smil-attribs.module "INCLUDE" >
<![%smil-attribs.module;[
<!ENTITY % smil-attribs.mod
PUBLIC "-//W3C//ENTITIES SMIL 2.1 Common Attributes 1.0//EN"
"smil-attribs-1.mod" >
%smil-attribs.mod;]]>
<!ENTITY % smil-model.module "INCLUDE" >
<![%smil-model.module;[
<!-- A content model MUST be defined by the driver file -->
%smil-model.mod;]]>
<!-- end of smil-framework-1.mod -->