Speech Synthesis Markup Language (SSML) Version 1.0

Abstract

The Voice Browser Working Group has sought to develop standards to enable access to the Web using spoken interaction. The Speech Synthesis Markup Language Specification is one of these standards and is designed to provide a rich, XML-based markup language for assisting the generation of synthetic speech in Web and other applications. The essential role of the markup language is to provide authors of synthesizable content a standard way to control aspects of speech such as pronunciation, volume, pitch, rate, etc. across different synthesis-capable platforms.

Status of this Document

This section describes the status of this document at the time of its publication. Other documents may supersede this document. A list of current W3C publications and the latest revision of this technical report can be found in the W3C technical reports index at http://www.w3.org/TR/.

This document contains the Speech Synthesis Markup Language (SSML) 1.0 specification and is a W3C Recommendation. It has been produced as part of the Voice Browser Activity. The authors of this document are participants in the Voice Browser Working Group (W3C members only). For more information see the Voice Browser FAQ. This is a stable document and has been endorsed by the W3C Membership and the participants of the Voice Browser working group.

The design of SSML 1.0 has been widely reviewed (see the disposition of comments) and satisfies the Working Group's technical requirements. A list of implementations is included in the SSML 1.0 Implementation Report, along with the associated test suite.

Comments are welcome on www-voice@w3.org (archive). See W3C mailing list and archive usage guidelines.

Patent disclosures relevant to this specification may be found on the Working Group's patent disclosure page. This document has been produced under the 24 January 2002 CPP as amended by the W3C Patent Policy Transition Procedure. An individual who has actual knowledge of a patent which the individual believes contains Essential Claim(s) with respect to this specification should disclose the information in accordance with section 6 of the W3C Patent Policy.

0. Table of Contents

• 1. Introduction
  • 1.1 Design Concepts
  • 1.2 Speech Synthesis Process Steps
  • 1.3 Document Generation, Applications and Contexts
  • 1.4 Platform-Dependent Output Behavior of SSML Content
  • 1.5 Terminology
• 2.SSML Documents
  • 2.1 Document Form
  • 2.2 Conformance
    • 2.2.1 Conforming Speech Synthesis Markup Language Fragments
    • 2.2.2 Conforming Stand-Alone Speech Synthesis Markup Language Documents
    • 2.2.3 Using SSML With Other Namespaces
    • 2.2.4 Conforming Speech Synthesis Markup Language Processors
    • 2.2.5 Conforming User Agent
  • 2.3 Integration With Other Markup Languages
    • 2.3.1 SMIL
    • 2.3.2 ACSS
    • 2.3.3 VoiceXML
  • 2.4 Fetching SSML Documents
• 3. Elements and Attributes
  • 3.1 Document Structure, Text Processing and Pronunciation
    • 3.1.1 "speak" Root Element
    • 3.1.2 Language: "xml:lang" Attribute
    • 3.1.3 Base URI: "xml:base" Attribute
    • 3.1.4 Pronunciation Lexicon: "lexicon" Element
    • 3.1.5 "meta" Element
    • 3.1.6 "metadata" Element
    • 3.1.7 Text Structure: "p" and "s" Elements
    • 3.1.8 "say-as" Element
    • 3.1.9 "phoneme" Element
    • 3.1.10 "sub" Element
  • 3.2 Prosody and Style
    • 3.2.1 "voice" Element
    • 3.2.2 "emphasis" Element
    • 3.2.3 "break" Element
    • 3.2.4 "prosody" Element
  • 3.3 Other Elements
    • 3.3.1 "audio" Element
    • 3.3.2 "mark" Element
    • 3.3.3 "desc" Element
• 4. References
• 5. Acknowledgments
• Appendix A. Audio File Formats (normative)
• Appendix B. Internationalization (normative)
• Appendix C. MIME Types and File Suffix (normative)
• Appendix D. Schema for the Speech Synthesis Markup Language (normative)
• Appendix E. DTD for the Speech Synthesis Markup Language (informative)
• Appendix F. Example SSML (informative)
• Appendix G. Summary of changes since the Candidate Recommendation (informative)

1. Introduction

This W3C specification is known as the Speech Synthesis Markup Language specification (SSML) and is based upon the JSGF and/or JSML specifications, which are owned by Sun Microsystems, Inc., California, U.S.A. The JSML specification can be found at [JSML].

SSML is part of a larger set of markup specifications for voice browsers developed through the open processes of the W3C. It is designed to provide a rich, XML-based markup language for assisting the generation of synthetic speech in Web and other applications. The essential role of the markup language is to give authors of synthesizable content a standard way to control aspects of speech output such as pronunciation, volume, pitch, rate, etc. across different synthesis-capable platforms. A related initiative to establish a standard system for marking up text input is SABLE [SABLE], which tried to integrate many different XML-based markups for speech synthesis into a new one. The activity carried out in SABLE was also used as the main starting point for defining the Speech Synthesis Markup Requirements for Voice Markup Languages [REQS]. Since then, SABLE itself has not undergone any further development.

The intended use of SSML is to improve the quality of synthesized content. Different markup elements impact different stages of the synthesis process (see Section 1.2). The markup may be produced either automatically, for instance via XSLT or CSS3 from an XHTML document, or by human authoring. Markup may be present within a complete SSML document (see Section 2.2.2) or as part of a fragment (see Section 2.2.1) embedded in another language, although no interactions with other languages are specified as part of SSML itself. Most of the markup included in SSML is suitable for use by the majority of content developers; however, some advanced features like phoneme and prosody (e.g. for speech contour design) may require specialized knowledge.

1.1 Design Concepts

The design and standardization process has followed from the Speech Synthesis Markup Requirements for Voice Markup Languages [REQS].

The following items were the key design criteria.

• Consistency: provide predictable control of voice output across platforms and across speech synthesis implementations.
• Interoperability: support use along with other W3C specifications including (but not limited to) VoiceXML, aural Cascading Style Sheets and SMIL.
• Generality: support speech output for a wide range of applications with varied speech content.
• Internationalization: Enable speech output in a large number of languages within or across documents.
• Generation and Readability: Support automatic generation and hand authoring of documents. The documents should be human-readable.
• Implementable: The specification should be implementable with existing, generally available technology, and the number of optional features should be minimal.

1.2 Speech Synthesis Process Steps

A Text-To-Speech system (a synthesis processor) that supports SSML will be responsible for rendering a document as spoken output and for using the information contained in the markup to render the document as intended by the author.

Document creation: A text document provided as input to the synthesis processor may be produced automatically, by human authoring, or through a combination of these forms. SSML defines the form of the document.

Document processing: The following are the six major processing steps undertaken by a synthesis processor to convert marked-up text input into automatically generated voice output. The markup language is designed to be sufficiently rich so as to allow control over each of the steps described below so that the document author (human or machine) can control the final voice output. Although each step below is divided into "markup support" and "non-markup behavior", actual behavior is usually a mix of the two and varies depending on the tag. The processor has the ultimate authority to ensure that what it produces is pronounceable (and ideally intelligible). In general the markup provides a way for the author to make prosodic and other information available to the processor, typically information the processor would be unable to acquire on its own. It is then up to the processor to determine whether and in what way to use the information.

1. XML parse: An XML parser is used to extract the document tree and content from the incoming text document. The structure, tags and attributes obtained in this step influence each of the following steps. Tokens (words) in SSML cannot span markup tags. A simple English example is "cup<break/>board"; the synthesis processor will treat this as the two words "cup" and "board" rather than as one word with a pause in the middle. Breaking one token into multiple tokens this way will likely affect how the processor treats it.

2. Structure analysis: The structure of a document influences the way in which a document should be read. For example, there are common speaking patterns associated with paragraphs and sentences.

   • Markup support: The p and s elements defined in SSML explicitly indicate document structures that affect the speech output.

   • Non-markup behavior: In documents and parts of documents where these elements are not used, the synthesis processor is responsible for inferring the structure by automated analysis of the text, often using punctuation and other language-specific data.

3. Text normalization: All written languages have special constructs that require a conversion of the written form (orthographic form) into the spoken form. Text normalization is an automated process of the synthesis processor that performs this conversion. For example, for English, when "$200" appears in a document it may be spoken as "two hundred dollars". Similarly, "1/2" may be spoken as "half", "January second", "February first", "one of two" and so on. By the end of this step the text to be spoken has been converted completely into tokens. The exact details of what constitutes a token are language-specific. In English, tokens are usually separated by white space and are typically words. For languages with different tokenization behavior, the term "word" in this specification is intended to mean an appropriately comparable unit.

   • Markup support: The say-as element can be used in the input document to explicitly indicate the presence and type of these constructs and to resolve ambiguities. The set of constructs that can be marked has not yet been defined but might include dates, times, numbers, acronyms, currency amounts and more. Note that many acronyms and abbreviations can be handled by the author via direct text replacement or by use of the sub element, e.g. "BBC" can be written as "B B C" and "AAA" can be written as "triple A". These replacement written forms will likely be pronounced as one would want the original acronyms to be pronounced. In the case of Japanese text, if you have a synthesis processor that supports both Kanji and kana, you may be able to use the sub element to identify whether 今日は should be spoken as きょうは ("kyou wa" = "today") or こんにちは ("konnichiwa" = "hello").

   • Non-markup behavior: For text content that is not marked with the say-as element the synthesis processor is expected to make a reasonable effort to automatically locate and convert these constructs to a speakable form. Because of inherent ambiguities (such as the "1/2" example above) and because of the wide range of possible constructs in any language, this process may introduce errors in the speech output and may cause different processors to render the same document differently.

4. Text-to-phoneme conversion: Once the synthesis processor has determined the set of words to be spoken, it must derive pronunciations for each word. Word pronunciations may be conveniently described as sequences of phonemes, which are units of sound in a language that serve to distinguish one word from another. Each language (and sometimes each national or dialect variant of a language) has a specific phoneme set: e.g., most US English dialects have around 45 phonemes, Hawai'ian has between 12 and 18 (depending on who you ask), and some languages have more than 100! This conversion is made complex by a number of issues. One issue is that there are differences between written and spoken forms of a language, and these differences can lead to indeterminacy or ambiguity in the pronunciation of written words. For example, compared with their spoken form, words in Hebrew and Arabic are usually written with no vowels, or only a few vowels specified. In many languages the same written word may have many spoken forms. For example, in English, "read" may be spoken as "reed" (I will read the book) or "red" (I have read the book). Both human speakers and synthesis processors can pronounce these words correctly in context but may have difficulty without context (see "Non-markup behavior" below). Another issue is the handling of words with non-standard spellings or pronunciations. For example, an English synthesis processor will often have trouble determining how to speak some non-English-origin names, e.g. "Caius College" (pronounced "keys college") and President Tito (pronounced "sutto"), the president of the Republic of Kiribati (pronounced "kiribass").

   • Markup support: The phoneme element allows a phonemic sequence to be provided for any word or word sequence. This provides the content creator with explicit control over pronunciations. The say-as element might also be used to indicate that text is a proper name that may allow a synthesis processor to apply special rules to determine a pronunciation. The lexicon element can be used to reference external definitions of pronunciations. These elements can be particularly useful for acronyms and abbreviations that the processor is unable to resolve via its own text normalization and that are not addressable via direct text substitution or the sub element (see paragraph 3, above).

   • Non-markup behavior: In the absence of a phoneme element the synthesis processor must apply automated capabilities to determine pronunciations. This is typically achieved by looking up words in a pronunciation dictionary (which may be language-dependent) and applying rules to determine other pronunciations. Synthesis processors are designed to perform text-to-phoneme conversions so most words of most documents can be handled automatically. As an alternative to relying upon the processor, authors may choose to perform some conversions themselves prior to encoding in SSML. Written words with indeterminate or ambiguous pronunciations could be replaced by words with an unambiguous pronunciation; for example, in the case of "read", "I will reed the book". Authors should be aware, however, that the resulting SSML document may not be optimal for visual display.

5. Prosody analysis: Prosody is the set of features of speech output that includes the pitch (also called intonation or melody), the timing (or rhythm), the pausing, the speaking rate, the emphasis on words and many other features. Producing human-like prosody is important for making speech sound natural and for correctly conveying the meaning of spoken language.

   • Markup support: The emphasis element, break element and prosody element may all be used by document creators to guide the synthesis processor in generating appropriate prosodic features in the speech output.

   • Non-markup behavior: In the absence of these elements, synthesis processors are expert (but not perfect) in automatically generating suitable prosody. This is achieved through analysis of the document structure, sentence syntax, and other information that can be inferred from the text input.

   While most of the elements of SSML can be considered high-level in that they provide either content to be spoken or logical descriptions of style, the break and prosody elements mentioned above operate at a later point in the process and thus must coexist both with uses of the emphasis element and with the processor's own determinations of prosodic behavior. Unless specified in the appropriate sections, details of the interactions between the processor's own determinations and those provided by the author at this level are processor-specific. Authors are encouraged not to casually or arbitrarily mix these two levels of control.

6. Waveform production: The phonemes and prosodic information are used by the synthesis processor in the production of the audio waveform. There are many approaches to this processing step so there may be considerable processor-specific variation.

   • Markup support: The voice element allows the document creator to request a particular voice or specific voice qualities (e.g. a young male voice). The audio element allows for insertion of recorded audio data into the output stream.

1.3 Document Generation, Applications and Contexts

There are many classes of document creator that will produce marked-up documents to be spoken by a synthesis processor. Not all document creators (including human and machine) have access to information that can be used in all of the elements or in each of the processing steps described in the previous section. The following are some of the common cases.

• The document creator has no access to information to mark up the text. All processing steps in the synthesis processor must be performed fully automatically on raw text. The document requires only the containing speak element to indicate the content is to be spoken.

• When marked text is generated programmatically the creator may have specific knowledge of the structure and/or special text constructs in some or all of the document. For example, an email reader can mark the location of the time and date of receipt of email. Such applications may use elements that affect structure, text normalization, prosody and possibly text-to-phoneme conversion.

• Some document creators make considerable effort to mark as many details of the document as possible to ensure consistent speech quality across platforms and to more precisely specify output qualities. In these cases, the markup may use any or all of the available elements to tightly control the speech output. For example, prompts generated in telephony and voice browser applications may be fine-tuned to maximize the effectiveness of the overall system.

• The most advanced document creators may skip the higher-level markup (structure, text normalization, text-to-phoneme conversion, and prosody analysis) and produce low-level speech synthesis markup for segments of documents or for entire documents. This typically requires tools to generate sequences of phonemes, plus pitch and timing information. For instance, tools that do "copy synthesis" or "prosody transplant" try to emulate human speech by copying properties from recordings.

The following are important instances of architectures or designs from which marked-up synthesis documents will be generated. The language design is intended to facilitate each of these approaches.

• Dialog language: It is a requirement that it should be possible to include documents marked with SSML into the dialog description document to be produced by the Voice Browser Working Group.

• Interoperability with aural CSS (ACSS): Any HTML processor that is aural CSS-enabled can produce SSML. ACSS is covered in Section 19 of the Cascading Style Sheets, level 2 (CSS2) Specification [CSS2 §19]. This usage of speech synthesis facilitates improved accessibility to existing HTML and XHTML content.

• Application-specific style sheet processing: As mentioned above, there are classes of applications that have knowledge of text content to be spoken, and that can be incorporated into the speech synthesis markup to enhance rendering of the document. In many cases, it is expected that the application will use style sheets to perform transformations of existing XML documents to SSML. This is equivalent to the use of ACSS with HTML and once again SSML is the resulting representation to be passed to the synthesis processor. In this context, SSML may be viewed as a superset of ACSS [CSS2§19] capabilities, excepting spatial audio.

1.4 Platform-Dependent Output Behavior of SSML Content

SSML provides a standard way to specify gross properties of synthetic speech production such as pronunciation, volume, pitch, rate, etc. Exact specification of synthetic speech output behavior across disparate processors, however, is beyond the scope of this document.

Unless otherwise specified, markup values are merely indications rather than absolutes. For example, it is possible for an author to explicitly indicate the duration of a text segment and also indicate an explicit duration for a subset of that text segment. If the two durations result in a text segment that the synthesis processor cannot reasonably render, the processor is permitted to modify the durations as needed to render the text segment.

1.5 Terminology

Requirements terms

The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. However, for readability, these words do not appear in all uppercase letters in this specification.

At user option

A conforming synthesis processor may or must (depending on the modal verb in the sentence) behave as described; if it does, it must provide users a means to enable or disable the behavior described.

Error

Results are undefined. A conforming synthesis processor may detect and report an error and may recover from it.

Media Type

A media type (defined in [RFC2045] and [RFC2046]) specifies the nature of a linked resource. Media types are case insensitive. A list of registered media types is available for download [TYPES]. See Appendix C for information on media types for SSML.

Speech Synthesis

The process of automatic generation of speech output from data input which may include plain text, marked up text or binary objects.

Synthesis Processor

A Text-To-Speech system that accepts SSML documents as input and renders them as spoken output.

Text-To-Speech

The process of automatic generation of speech output from text or annotated text input.

URI: Uniform Resource Identifier

A URI is a unifying syntax for the expression of names and addresses of objects on the network as used in the World Wide Web. A URI is defined as any legal anyURI primitive as defined in XML Schema Part 2: Datatypes [SCHEMA2 §3.2.17]. For informational purposes only, [RFC2396] and [RFC2732] may be useful in understanding the structure, format, and use of URIs. Any relative URI reference must be resolved according to the rules given in Section 3.1.3.1. In this specification URIs are provided as attributes to elements, for example in the audio and lexicon elements.

Voice Browser

A device which interprets a (voice) markup language and is capable of generating voice output and/or interpreting voice input, and possibly other input/output modalities.

2. SSML Documents

2.1 Document Form

A legal stand-alone Speech Synthesis Markup Language document must have a legal XML Prolog [XML §2.8]. If present, the optional DOCTYPE must read as follows:

<!DOCTYPE speak PUBLIC "-//W3C//DTD SYNTHESIS 1.0//EN"
  "http://www.w3.org/TR/speech-synthesis/synthesis.dtd"> 

The XML prolog is followed by the root speak element. See Section 3.1.1 for details on this element.

The speak element must designate the SSML namespace. This can be achieved by declaring an xmlns attribute or an attribute with an "xmlns" prefix. See [XMLNS §2] for details. Note that when the xmlns attribute is used alone, it sets the default namespace for the element on which it appears and for any child elements. The namespace for SSML is defined to be http://www.w3.org/2001/10/synthesis.

It is recommended that the speak element also indicate the location of the SSML schema (see Appendix D) via the xsi:schemaLocation attribute from [SCHEMA1 §2.6.3]. Although such indication is not required, to encourage it this document provides such indication on all of the examples.

The following are two examples of legal SSML headers:

<?xml version="1.0"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">

<?xml version="1.0"?>
<!DOCTYPE speak PUBLIC "-//W3C//DTD SYNTHESIS 1.0//EN"
                  "http://www.w3.org/TR/speech-synthesis/synthesis.dtd">
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xml:lang="en-US">

The meta, metadata and lexicon elements must occur before all other elements and text contained within the root speak element. There are no other ordering constraints on the elements in this specification.

2.2. Conformance

2.2.1 Conforming Speech Synthesis Markup Language Fragments

A document fragment is a Conforming Speech Synthesis Markup Language Fragment if:

• it conforms to the criteria for Conforming Stand-Alone Speech Synthesis Markup Language Documents after:
  • with the exception of xml:lang and xml:base , all non-synthesis namespace elements and attributes and all xmlns attributes which refer to non-synthesis namespace elements are removed from the document,
  • and, if the speak element does not already designate the synthesis namespace using the xmlns attribute, then xmlns="http://www.w3.org/2001/10/synthesis" is added to the element.

2.2.2 Conforming Stand-Alone Speech Synthesis Markup Language Documents

A document is a Conforming Stand-Alone Speech Synthesis Markup Language Document if it meets both the following conditions:

• It is a well-formed XML document [XML §2.1] conforming to Namespaces in XML [XMLNS].
• It is a valid XML document [XML §2.8] which adheres to the specification described in this document (Speech Synthesis Markup Language Specification) including the constraints expressed in the Schema (see Appendix D) and having an XML Prolog and speak root element as specified in Section 2.1.

The SSML specification and these conformance criteria provide no designated size limits on any aspect of synthesis documents. There are no maximum values on the number of elements, the amount of character data, or the number of characters in attribute values.

2.2.3 Using SSML with other Namespaces

The synthesis namespace may be used with other XML namespaces as per the Namespaces in XML Recommendation [XMLNS]. Future work by W3C is expected to address ways to specify conformance for documents involving multiple namespaces.

2.2.4 Conforming Speech Synthesis Markup Language Processors

A Speech Synthesis Markup Language processor is a program that can parse and process Conforming Stand-Alone Speech Synthesis Markup Language documents.

In a Conforming Speech Synthesis Markup Language Processor, the XML parser must be able to parse and process all XML constructs defined by XML 1.0 [XML] and Namespaces in XML [XMLNS]. This XML parser is not required to perform validation of an SSML document as per its schema or DTD; this implies that during processing of an SSML document it is optional to apply or expand external entity references defined in an external DTD.

A Conforming Speech Synthesis Markup Language Processor must correctly understand and apply the semantics of each markup element as described by this document.

A Conforming Speech Synthesis Markup Language Processor must meet the following requirements for handling of natural (human) languages:

• A Conforming Speech Synthesis Markup Language Processor is required to parse all legal natural language declarations successfully.
• A Conforming Speech Synthesis Markup Language Processor may be able to apply the semantics of markup languages which refer to more than one natural language. When a processor is able to support each natural language in the set but is unable to handle them concurrently it should inform the hosting environment. When the set includes one or more natural languages that are not supported by the processor it should inform the hosting environment.
• A Conforming Speech Synthesis Markup Language Processor may implement natural languages by approximate substitutions according to a documented, processor-specific behavior. For example, a US English synthesis processor could process British English input.

When a Conforming Speech Synthesis Markup Language Processor encounters elements or attributes, other than xml:lang and xml:base , in a non-synthesis namespace it may:

• ignore the non-standard elements and/or attributes
• or, process the non-standard elements and/or attributes
• or, reject the document containing those elements and/or attributes

There is, however, no conformance requirement with respect to performance characteristics of the Speech Synthesis Markup Language Processor. For instance, no statement is required regarding the accuracy, speed or other characteristics of speech produced by the processor. No statement is made regarding the size of input that a Speech Synthesis Markup Language Processor must support.

2.2.5 Conforming User Agent

A Conforming User Agent is a Conforming Speech Synthesis Markup Language Processor that is capable of accepting an SSML document as input and producing a spoken output by using the information contained in the markup to render the document as intended by the author. A Conforming User Agent must support at least one natural language.

Since the output cannot be guaranteed to be a correct representation of all the markup contained in the input there is no conformance requirement regarding accuracy. A conformance test may, however, require some examples of correct synthesis of a reference document to determine conformance.

2.3 Integration With Other Markup Languages

2.3.1 SMIL

The Synchronized Multimedia Integration Language (SMIL, pronounced "smile") [SMIL] enables simple authoring of interactive audiovisual presentations. SMIL is typically used for "rich media"/multimedia presentations which integrate streaming audio and video with images, text or any other media type. SMIL is an easy-to-learn HTML-like language, and many SMIL presentations are written using a simple text editor. See the SMIL/SSML integration examples in Appendix F.

2.3.2 ACSS

Aural Cascading Style Sheets [CSS2 §19] are employed to augment standard visual forms of documents (like HTML) with additional elements that assist in the synthesis of the text into audio. In comparison to SSML, ACSS-generated documents are capable of more complex specifications of the audio sequence, including the designation of 3D location of the audio source. Many of the other ACSS elements overlap SSML functionality, especially in the specification of voice type/quality. SSML may be viewed as a superset of ACSS capabilities, excepting spatial audio.

2.3.3 VoiceXML

The Voice Extensible Markup Language [VXML] enables Web-based development and content-delivery for interactive voice response applications (see voice browser ). VoiceXML supports speech synthesis, recording and playback of digitized audio, speech recognition, DTMF input, telephony call control, and form-driven mixed initiative dialogs. VoiceXML 2.0 extends SSML for the markup of text to be synthesized. For an example of the integration between VoiceXML and SSML see Appendix F.

2.4 Fetching SSML Documents

The fetching and caching behavior of SSML documents is defined by the environment in which the synthesis processor operates. In a VoiceXML interpreter context for example, the caching policy is determined by the VoiceXML interpreter.

3. Elements and Attributes

The following elements and attributes are defined in this specification.

• 3.1 Document Structure, Text Processing and Pronunciation
  • 3.1.1 "speak" Root Element
  • 3.1.2 Language: "xml:lang" Attribute
  • 3.1.3 base URI: "xml:base" Attribute
  • 3.1.4 Pronunciation Lexicon: "lexicon" Element
  • 3.1.5 "meta" Element
  • 3.1.6 "metadata" Element
  • 3.1.7 Text Structure: "p" and "s" Elements
  • 3.1.8 "say-as" Element
  • 3.1.9 "phoneme" Element
  • 3.1.10 "sub" Element
• 3.2 Prosody and Style
  • 3.2.1 "voice" Element
  • 3.2.2 "emphasis" Element
  • 3.2.3 "break" Element
  • 3.2.4 "prosody" Element
• 3.3 Other Elements
  • 3.3.1 "audio" Element
  • 3.3.2 "mark" Element
  • 3.3.3 "desc" Element

3.1 Document Structure, Text Processing and Pronunciation

3.1.1 speak Root Element

The Speech Synthesis Markup Language is an XML application. The root element is speak. xml:lang is a required attribute specifying the language of the root document. xml:base is an optional attribute specifying the Base URI of the root document. The version attribute is a required attribute that indicates the version of the specification to be used for the document and must have the value "1.0".

<?xml version="1.0"?>
<speak version="1.0"
         xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
  ... the body ...
</speak>

The speak element can only contain text to be rendered and the following elements: audio, break, emphasis, lexicon, mark, meta, metadata, p, phoneme, prosody, say-as, sub, s, voice.

3.1.2 Language: xml:lang Attribute

The xml:lang attribute, as defined by XML 1.0 [XML §2.12], can be used in SSML to indicate the natural language of the enclosing element and its attributes and subelements. RFC 3066 [RFC3066] may be of some use in understanding how to use this attribute.

Language information is inherited down the document hierarchy, i.e. it has to be given only once if the whole document is in one language, and language information nests, i.e. inner attributes overwrite outer attributes.

xml:lang is a defined attribute for the voice, speak, p, and s elements. For vocal rendering, a language change can have an effect on various other parameters (including gender, speed, age, pitch, etc.) which may be disruptive to the listener. There might even be unnatural breaks between language shifts. For this reason authors are encouraged to use the voice element to change the language. xml:lang is permitted on p and s only because it is common to change the language at those levels.

Although this attribute is also permitted on the desc element, none of the voice-change behavior described in this section applies when used with that element.

<?xml version="1.0"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
  <p>I don't speak Japanese.</p>
  <p xml:lang="ja">日本語が分かりません。</p>
</speak>

In the case that a document requires speech output in a language not supported by the processor, the synthesis processor largely determines behavior. Specifying xml:lang does not imply a change in voice, though this may indeed occur. When a given voice is unable to speak content in the indicated language, a new voice may be selected by the processor. No change in the voice or prosody should occur if the xml:lang value is the same as the inherited value. Further information about voice selection appears in Section 3.2.1.

There may be variation across conforming processors in the implementation of xml:lang voice changes for different markup elements (e.g. p and s elements).

All elements should process their contents specific to the enclosing language. For instance, the phoneme, emphasis, break, p and s elements should each be rendered in a manner that is appropriate to the current language.

The text normalization processing step may be affected by the enclosing language. This is true for both markup support by the say-as element and non-markup behavior. In the following example the same text "2/1/2000" may be read as "February first two thousand" in the first sentence, following American English pronunciation rules, but as "the second of January two thousand" in the second one, which follows Italian preprocessing rules.

<?xml version="1.0" encoding="ISO-8859-1"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
  <s>Today, 2/1/2000.</s>
  <!-- Today, February first two thousand -->
  <s xml:lang="it">Un mese fà, 2/1/2000.</s>
  <!-- Un mese fà, il due gennaio duemila -->
  <!-- One month ago, the second of January two thousand -->
</speak>

3.1.3 base URI: xml:base Attribute

Relative URIs are resolved according to a base URI, which may come from a variety of sources. The base URI declaration allows authors to specify a document's base URI explicitly. See Section 3.1.3.1 for details on the resolution of relative URIs.

The base URI declaration is permitted but optional. The two elements affected by it are

audio

The optional src attribute can specify a relative URI.

lexicon

The uri attribute can specify a relative URI.

The xml:base attribute

The base URI declaration follows [XML-BASE] and is indicated by an xml:base attribute on the root speak element.

<?xml version="1.0"?>
<speak version="1.0" xml:lang="en-US"
         xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:base="http://www.example.com/base-file-path">

<?xml version="1.0"?>
<speak version="1.0" xml:lang="en-US"
         xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:base="http://www.example.com/another-base-file-path">

3.1.3.1 Resolving Relative URIs

User agents must calculate the base URI for resolving relative URIs according to [RFC2396]. The following describes how RFC2396 applies to synthesis documents.

User agents must calculate the base URI according to the following precedences (highest priority to lowest):

1. The base URI is set by the xml:base attribute on the speak element (see Section 3.1.3).
2. The base URI is given by metadata discovered during a protocol interaction, such as an HTTP header (see [RFC2616]).
3. By default, the base URI is that of the current document. Not all synthesis documents have a base URI (e.g., a valid synthesis document may appear in an email and may not be designated by a URI). It is an error if such documents contain relative URIs.

3.1.4 Pronunciation Lexicon: lexicon Element

An SSML document may reference one or more external pronunciation lexicon documents. A lexicon document is identified by a URI with an optional media type. No standard lexicon media type has yet been defined as the default for this specification.

The W3C Voice Browser Working Group is developing the Pronunciation Lexicon Markup Language [LEX]. The specification is expected to address the matching process between tokens and lexicon entries and the mechanism by which a synthesis processor handles multiple pronunciations from internal and synthesis-specified lexicons. Pronunciation handling with proprietary lexicon formats will necessarily be specific to the synthesis processor.

A lexicon document contains pronunciation information for tokens that can appear in a text to be spoken. The pronunciation information contained within a lexicon is used for tokens appearing within the referencing document.

Pronunciation lexicons are necessarily language-specific. Pronunciation lookup in a lexicon and pronunciation inference for any token may use an algorithm that is language-specific. As mentioned in Section 1.2, the definition of what constitutes a "token" may itself be language-specific.

When multiple lexicons are referenced, their precedence goes from lower to higher with document order. Precedence means that a token is first looked up in the lexicon with highest precedence. Only if not found in that lexicon, the next lexicon is searched and so on until a first match or until all lexicons have been used for lookup.

The lexicon element

Any number of lexicon elements may occur as immediate children of the speak element. The lexicon element must have a uri attribute specifying a URI that identifies the location of the pronunciation lexicon document.

The lexicon element may have a type attribute that specifies the media type of the pronunciation lexicon document.

<?xml version="1.0"?>
<!DOCTYPE speak PUBLIC "-//W3C//DTD SYNTHESIS 1.0//EN"
                  "http://www.w3.org/TR/speech-synthesis/synthesis.dtd">
<speak version="1.0"
       xmlns="http://www.w3.org/2001/10/synthesis"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                 http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
       xml:lang="en-US">

  <lexicon uri="http://www.example.com/lexicon.file"/>
  <lexicon uri="http://www.example.com/strange-words.file"
           type="media-type"/>
  ...
</speak>

Details of the type attribute

Note: the description and table that follow use an imaginary vendor-specific lexicon type of x-vnd.example.lexicon. This is intended to represent whatever format is returned/available, as appropriate.

A lexicon resource indicated by a URI reference may be available in one or more media types. The SSML author can specify the preferred media type via the type attribute. When the content represented by a URI is available in many data formats, a synthesis processor may use the preferred type to influence which of the multiple formats is used. For instance, on a server implementing HTTP content negotiation, the processor may use the type to order the preferences in the negotiation.

Upon delivery, the resource indicated by a URI reference may be considered in terms of two types. The declared media type is the alleged value for the resource and the actual media type is the true format of its content. The actual type should be the same as the declared type, but this is not always the case (e.g. a misconfigured HTTP server might return text/plain for a document following the vendor-specific x-vnd.example.lexicon format). A specific URI scheme may require that the resource owner always, sometimes, or never return a media type. Whenever a type is returned, it is treated as authoritative. The declared media type is determined by the value returned by the resource owner or, if none is returned, by the preferred media type given in the SSML document.

Three special cases may arise. The declared type may not be supported by the processor; this is an error. The declared type may be supported but the actual type may not match; this is also an error. Finally, no media type may be declared; the behavior depends on the specific URI scheme and the capabilities of the synthesis processor. For instance, HTTP 1.1 allows document introspection (see [RFC2616 §7.2.1]), the data scheme falls back to a default media type, and local file access defines no guidelines. The following table provides some informative examples:

The lexicon element is an empty element.

3.1.5 meta Element

The metadata and meta elements are containers in which information about the document can be placed. The metadata element provides more general and powerful treatment of metadata information than meta by using a metadata schema.

A meta declaration associates a string to a declared meta property or declares "http-equiv" content. Either a name or http-equiv attribute is required. It is an error to provide both name and http-equiv attributes. A content attribute is required. The seeAlso property is the only defined meta property name. It is used to specify a resource that might provide additional metadata information about the content. This property is modelled on the seeAlso property of Resource Description Framework (RDF) Schema Specification 1.0 [RDF-SCHEMA §5.4.1]. The http-equiv attribute has a special significance when documents are retrieved via HTTP. Although the preferred method of providing HTTP header information is by using HTTP header fields, the "http-equiv" content may be used in situations where the SSML document author is unable to configure HTTP header fields associated with their document on the origin server, for example, cache control information. Note that HTTP servers and caches are not required to introspect the contents of meta in SSML documents and thereby override the header values they would send otherwise.

Informative: This is an example of how meta elements can be included in an SSML document to specify a resource that provides additional metadata information and also indicate that the document must not be cached.

<?xml version="1.0"?>
<!DOCTYPE speak PUBLIC "-//W3C//DTD SYNTHESIS 1.0//EN"
                  "http://www.w3.org/TR/speech-synthesis/synthesis.dtd">
<speak version="1.0"
       xmlns="http://www.w3.org/2001/10/synthesis"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                 http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
       xml:lang="en-US">

       <meta name="seeAlso" content="http://example.com/my-ssml-metadata.xml"/>
       <meta http-equiv="Cache-Control" content="no-cache"/>

</speak>

The meta element is an empty element.

3.1.6 metadata Element

The metadata element is a container in which information about the document can be placed using a metadata schema. Although any metadata schema can be used with metadata, it is recommended that the XML syntax of the Resource Description Framework (RDF) [RDF-XMLSYNTAX] be used in conjunction with the general metadata properties defined in the Dublin Core Metadata Initiative [DC].

The Resource Description Format [RDF] is a declarative language and provides a standard way for using XML to represent metadata in the form of statements about properties and relationships of items on the Web. Content creators should refer to W3C metadata Recommendations [RDF-XMLSYNTAX] and [RDF-SCHEMA] when deciding which metadata RDF schema to use in their documents. Content creators should also refer to the Dublin Core Metadata Initiative [DC], which is a set of generally applicable core metadata properties (e.g., Title, Creator, Subject, Description, Rights, etc.).

Document properties declared with the metadata element can use any metadata schema.

Informative: This is an example of how metadata can be included in an SSML document using the Dublin Core version 1.0 RDF schema [DC] describing general document information such as title, description, date, and so on:

<?xml version="1.0"?>
<!DOCTYPE speak PUBLIC "-//W3C//DTD SYNTHESIS 1.0//EN"
                  "http://www.w3.org/TR/speech-synthesis/synthesis.dtd">
<speak version="1.0"
       xmlns="http://www.w3.org/2001/10/synthesis"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                 http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
       xml:lang="en-US">
    
  <metadata>
   <rdf:RDF
       xmlns:rdf = "http://www.w3.org/1999/02/22-rdf-syntax-ns#"
       xmlns:rdfs = "http://www.w3.org/2000/01/rdf-schema#"
       xmlns:dc = "http://purl.org/dc/elements/1.1/">

   <!-- Metadata about the synthesis document -->
   <rdf:Description rdf:about="http://www.example.com/meta.ssml"
       dc:Title="Hamlet-like Soliloquy"
       dc:Description="Aldine's Soliloquy in the style of Hamlet"
       dc:Publisher="W3C"
       dc:Language="en-US"
       dc:Date="2002-11-29"
       dc:Rights="Copyright 2002 Aldine Turnbet"
       dc:Format="application/ssml+xml" >                
       <dc:Creator>
          <rdf:Seq ID="CreatorsAlphabeticalBySurname">
             <rdf:li>William Shakespeare</rdf:li>
             <rdf:li>Aldine Turnbet</rdf:li>
          </rdf:Seq>
       </dc:Creator>
   </rdf:Description>
  </rdf:RDF>
 </metadata>

</speak>

The metadata element can have arbitrary content, although none of the content will be rendered by the synthesis processor.

3.1.7 Text Structure: p and s Elements

A p element represents a paragraph. An s element represents a sentence.

xml:lang is a defined attribute on the p and s elements.

<?xml version="1.0"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
  <p>
    <s>This is the first sentence of the paragraph.</s>
    <s>Here's another sentence.</s>
  </p>
</speak>

The use of p and s elements is optional. Where text occurs without an enclosing p or s element the synthesis processor should attempt to determine the structure using language-specific knowledge of the format of plain text.

The p element can only contain text to be rendered and the following elements: audio, break, emphasis, mark, phoneme, prosody, say-as, sub, s, voice.

The s element can only contain text to be rendered and the following elements: audio, break, emphasis, mark, phoneme, prosody, say-as, sub, voice.

3.1.8 say-as Element

The say-as element allows the author to indicate information on the type of text construct contained within the element and to help specify the level of detail for rendering the contained text.

Defining a comprehensive set of text format types is difficult because of the variety of languages that have to be considered and because of the innate flexibility of written languages. SSML only specifies the say-as element, its attributes, and their purpose. It does not enumerate the possible values for the attributes. The Working Group expects to produce a separate document that will define standard values and associated normative behavior for these values. Examples given here are only for illustrating the purpose of the element and the attributes.

The say-as element has three attributes: interpret-as, format, and detail. The interpret-as attribute is always required; the other two attributes are optional. The legal values for the format attribute depend on the value of the interpret-as attribute.

The say-as element can only contain text to be rendered.

The interpret-as and format attributes

The interpret-as attribute indicates the content type of the contained text construct. Specifying the content type helps the synthesis processor to distinguish and interpret text constructs that may be rendered in different ways depending on what type of information is intended. In addition, the optional format attribute can give further hints on the precise formatting of the contained text for content types that may have ambiguous formats.

When specified, the interpret-as and format values are to be interpreted by the synthesis processor as hints provided by the markup document author to aid text normalization and pronunciation.

In all cases, the text enclosed by any say-as element is intended to be a standard, orthographic form of the language currently in context. A synthesis processor should be able to support the common, orthographic forms of the specified language for every content type that it supports.

When the value for the interpret-as attribute is unknown or unsupported by a processor, it must render the contained text as if no interpret-as value were specified.

When the value for the format attribute is unknown or unsupported by a processor, it must render the contained text as if no format value were specified, and should render it using the interpret-as value that is specified.

When the content of the say-as element contains additional text next to the content that is in the indicated format and interpret-as type, then this additional text must be rendered. The processor may make the rendering of the additional text dependent on the interpret-as type of the element in which it appears.
When the content of the say-as element contains no content in the indicated interpret-as type or format, the processor must render the content either as if the format attribute were not present, or as if the interpret-as attribute were not present, or as if neither the format nor interpret-as attributes were present. The processor should also notify the environment of the mismatch.

Indicating the content type or format does not necessarily affect the way the information is pronounced. A synthesis processor should pronounce the contained text in a manner in which such content is normally produced for the language.

The detail attribute

The detail attribute is an optional attribute that indicates the level of detail to be read aloud or rendered. Every value of the detail attribute must render all of the informational content in the contained text; however, specific values for the detail attribute can be used to render content that is not usually informational in running text but may be important to render for specific purposes. For example, a synthesis processor will usually render punctuations through appropriate changes in prosody. Setting a higher level of detail may be used to speak punctuations explicitly, e.g. for reading out coded part numbers or pieces of software code.

The detail attribute can be used for all interpret-as types.

If the detail attribute is not specified, the level of detail that is produced by the synthesis processor depends on the text content and the language.

When the value for the detail attribute is unknown or unsupported by a processor, it must render the contained text as if no value were specified for the detail attribute.

3.1.9 phoneme Element

The phoneme element provides a phonemic/phonetic pronunciation for the contained text. The phoneme element may be empty. However, it is recommended that the element contain human-readable text that can be used for non-spoken rendering of the document. For example, the content may be displayed visually for users with hearing impairments.

The ph attribute is a required attribute that specifies the phoneme/phone string.

This element is designed strictly for phonemic and phonetic notations and is intended to be used to provide pronunciations for words or very short phrases. The phonemic/phonetic string does not undergo text normalization and is not treated as a token for lookup in the lexicon (see Section 3.1.4), while values in say-as and sub may undergo both. Briefly, phonemic strings consist of phonemes, language-dependent speech units that characterize linguistically significant differences in the language; loosely, phonemes represent all the sounds needed to distinguish one word from another in a given language. On the other hand, phonetic strings consist of phones, speech units that characterize the manner (puff of air, click, vocalized, etc.) and place (front, middle, back, etc.) of articulation within the human vocal tract and are thus independent of language; phones represent realized distinctions in human speech production.

The alphabet attribute is an optional attribute that specifies the phonemic/phonetic alphabet. An alphabet in this context refers to a collection of symbols to represent the sounds of one or more human languages. The only valid values for this attribute are "ipa" (see the next paragraph) and vendor-defined strings of the form "x-organization" or "x-organization-alphabet". For example, the Japan Electronics and Information Technology Industries Association [JEITA] might wish to encourage the use of an alphabet such as "x-JEITA" or "x-JEITA-2000" for their phoneme alphabet [JEIDAALPHABET].

Synthesis processors should support a value for alphabet of "ipa", corresponding to Unicode representations of the phonetic characters developed by the International Phonetic Association [IPA]. In addition to an exhaustive set of vowel and consonant symbols, this character set supports a syllable delimiter, numerous diacritics, stress symbols, lexical tone symbols, intonational markers and more. For this alphabet, legal ph values are strings of the values specified in Appendix 2 of [IPAHNDBK]. Informative tables of the IPA-to-Unicode mappings can be found at [IPAUNICODE1] and [IPAUNICODE2]. Note that not all of the IPA characters are available in Unicode. For processors supporting this alphabet,

• The processor must syntactically accept all legal ph values.
• The processor should produce output when given Unicode IPA codes that can reasonably be considered to belong to the current language.
• The production of output when given other codes is entirely at processor discretion.

<?xml version="1.0"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
  <phoneme alphabet="ipa" ph="t&#x259;mei&#x325;&#x27E;ou&#x325;"> tomato </phoneme>
  <!-- This is an example of IPA using character entities -->
  <!-- Because many platform/browser/text editor combinations do not
       correctly cut and paste Unicode text, this example uses the entity
       escape versions of the IPA characters.  Normally, one would directly
       use the UTF-8 representation of these symbols: "təmei̥ɾou̥". -->
</speak>

It is an error if a value for alphabet is specified that is not known or cannot be applied by a synthesis processor. The default behavior when the alphabet attribute is left unspecified is processor-specific.

The phoneme element itself can only contain text (no elements).

3.1.10 sub Element

The sub element is employed to indicate that the text in the alias attribute value replaces the contained text for pronunciation. This allows a document to contain both a spoken and written form. The required alias attribute specifies the string to be spoken instead of the enclosed string. The processor should apply text normalization to the alias value.

The sub element can only contain text (no elements).

<?xml version="1.0"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
  <sub alias="World Wide Web Consortium">W3C</sub>
  <!-- World Wide Web Consortium -->
</speak>

3.2 Prosody and Style

3.2.1 voice Element

The voice element is a production element that requests a change in speaking voice. Attributes are:

• xml:lang : optional language specification attribute.

• gender: optional attribute indicating the preferred gender of the voice to speak the contained text. Enumerated values are: "male", "female", "neutral".

• age: optional attribute indicating the preferred age in years (since birth) of the voice to speak the contained text. Acceptable values are of type xsd:nonNegativeInteger [SCHEMA2 §3.3.20].

• variant: optional attribute indicating a preferred variant of the other voice characteristics to speak the contained text. (e.g. the second male child voice). Valid values of variant are of type xsd:positiveInteger [SCHEMA2 §3.3.25].

• name: optional attribute indicating a processor-specific voice name to speak the contained text. The value may be a space-separated list of names ordered from top preference down. As a result a name must not contain any white space.

Although each attribute individually is optional, it is an error if no attributes are specified when the voice element is used.

<?xml version="1.0"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">   
  <voice gender="female">Mary had a little lamb,</voice>
  <!-- now request a different female child's voice -->
  <voice gender="female" variant="2">
  Its fleece was white as snow.
  </voice>
  <!-- processor-specific voice selection -->
  <voice name="Mike">I want to be like Mike.</voice>
</speak>

The voice element is commonly used to change the language. When there is not a voice available that exactly matches the attributes specified in the document, or there are multiple voices that match the criteria, the following voice selection algorithm must be used. There are cases in the algorithm that are ambiguous; in such cases voice selection may be processor-specific. Approximately speaking, the xml:lang attribute has the highest priority and all other attributes are equal in priority but below xml:lang . The complete algorithm is:

1. If a voice is available for a requested xml:lang , a synthesis processor must use it. If there are multiple such voices available, the processor should use the voice that best matches the specified values for name, variant, gender and age.
2. If there is no voice available for the requested xml:lang , the processor should select a voice that is closest to the requested language (e.g. a variant or dialect of the same language). If there are multiple such voices available, the processor should use a voice that best matches the specified values for name, variant, gender and age.
3. It is an error if the processor decides it does not have a voice that sufficiently matches the above criteria.

Note that simple cases of foreign-text embedding (where a voice change is not needed or undesirable) can be done. See Appendix F for examples.

voice attributes are inherited down the tree including to within elements that change the language.

<?xml version="1.0"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
  <voice gender="female"> 
    Any female voice here.
    <voice age="6"> 
      A female child voice here.
      <p xml:lang="ja"> 
        <!-- A female child voice in Japanese. -->
      </p>
    </voice>
  </voice>
</speak>

Relative changes in prosodic parameters should be carried across voice changes. However, different voices have different natural defaults for pitch, speaking rate, etc. because they represent different personalities, so absolute values of the prosodic parameters may vary across changes in the voice.

The quality of the output audio or voice may suffer if a change in voice is requested within a sentence.

The voice element can only contain text to be rendered and the following elements: audio, break, emphasis, mark, p, phoneme, prosody, say-as, sub, s, voice.

3.2.2 emphasis Element

The emphasis element requests that the contained text be spoken with emphasis (also referred to as prominence or stress). The synthesis processor determines how to render emphasis since the nature of emphasis differs between languages, dialects or even voices. The attributes are:

• level: the optional level attribute indicates the strength of emphasis to be applied. Defined values are "strong", "moderate", "none" and "reduced". The default level is "moderate". The meaning of "strong" and "moderate" emphasis is interpreted according to the language being spoken (languages indicate emphasis using a possible combination of pitch change, timing changes, loudness and other acoustic differences). The "reduced" level is effectively the opposite of emphasizing a word. For example, when the phrase "going to" is reduced it may be spoken as "gonna". The "none" level is used to prevent the synthesis processor from emphasizing words that it might typically emphasize. The values "none", "moderate", and "strong" are monotonically non-decreasing in strength.

<?xml version="1.0"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
  That is a <emphasis> big </emphasis> car!
  That is a <emphasis level="strong"> huge </emphasis>
  bank account!
</speak>

The emphasis element can only contain text to be rendered and the following elements: audio, break, emphasis, mark, phoneme, prosody, say-as, sub, voice.

3.2.3 break Element

The break element is an empty element that controls the pausing or other prosodic boundaries between words. The use of the break element between any pair of words is optional. If the element is not present between words, the synthesis processor is expected to automatically determine a break based on the linguistic context. In practice, the break element is most often used to override the typical automatic behavior of a synthesis processor. The attributes on this element are:

• strength: the strength attribute is an optional attribute having one of the following values: "none", "x-weak", "weak", "medium" (default value), "strong", or "x-strong". This attribute is used to indicate the strength of the prosodic break in the speech output. The value "none" indicates that no prosodic break boundary should be outputted, which can be used to prevent a prosodic break which the processor would otherwise produce. The other values indicate monotonically non-decreasing (conceptually increasing) break strength between words. The stronger boundaries are typically accompanied by pauses. "x-weak" and "x-strong" are mnemonics for "extra weak" and "extra strong", respectively.

• time: the time attribute is an optional attribute indicating the duration of a pause to be inserted in the output in seconds or milliseconds. It follows the time value format from the Cascading Style Sheets Level 2 Recommendation [CSS2], e.g. "250ms", "3s".

The strength attribute is used to indicate the prosodic strength of the break. For example, the breaks between paragraphs are typically much stronger than the breaks between words within a sentence. The synthesis processor may insert a pause as part of its implementation of the prosodic break. A pause of a specific length can also be inserted by using the time attribute.

If a break element is used with neither strength nor time attributes, a break will be produced by the processor with a prosodic strength greater than that which the processor would otherwise have used if no break element was supplied.

If both strength and time attributes are supplied, the processor will insert a break with a duration as specified by the time attribute, with other prosodic changes in the output based on the value of the strength attribute.

<?xml version="1.0"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
  Take a deep breath <break/>
  then continue. 
  Press 1 or wait for the tone. <break time="3s"/>
  I didn't hear you! <break strength="weak"/> Please repeat.
</speak>

3.2.4 prosody Element

The prosody element permits control of the pitch, speaking rate and volume of the speech output. The attributes, all optional, are:

• pitch: the baseline pitch for the contained text. Although the exact meaning of "baseline pitch" will vary across synthesis processors, increasing/decreasing this value will typically increase/decrease the approximate pitch of the output. Legal values are: a number followed by "Hz", a relative change or "x-low", "low", "medium", "high", "x-high", or "default". Labels "x-low" through "x-high" represent a sequence of monotonically non-decreasing pitch levels.

• contour: sets the actual pitch contour for the contained text. The format is specified in Pitch contour below.

• range: the pitch range (variability) for the contained text. Although the exact meaning of "pitch range" will vary across synthesis processors, increasing/decreasing this value will typically increase/decrease the dynamic range of the output pitch. Legal values are: a number followed by "Hz", a relative change or "x-low", "low", "medium", "high", "x-high", or "default". Labels "x-low" through "x-high" represent a sequence of monotonically non-decreasing pitch ranges.

• rate: a change in the speaking rate for the contained text. Legal values are: a relative change or "x-slow", "slow", "medium", "fast", "x-fast", or "default". Labels "x-slow" through "x-fast" represent a sequence of monotonically non-decreasing speaking rates. When a number is used to specify a relative change it acts as a multiplier of the default rate. For example, a value of 1 means no change in speaking rate, a value of 2 means a speaking rate twice the default rate, and a value of 0.5 means a speaking rate of half the default rate. The default rate for a voice depends on the language and dialect and on the personality of the voice. The default rate for a voice should be such that it is experienced as a normal speaking rate for the voice when reading aloud text. Since voices are processor-specific, the default rate will be as well.

• duration: a value in seconds or milliseconds for the desired time to take to read the element contents. Follows the time value format from the Cascading Style Sheet Level 2 Recommendation [CSS2], e.g. "250ms", "3s".

• volume: the volume for the contained text in the range 0.0 to 100.0 (higher values are louder and specifying a value of zero is equivalent to specifying "silent"). Legal values are: number, a relative change or "silent", "x-soft", "soft", "medium", "loud", "x-loud", or "default". The volume scale is linear amplitude. The default is 100.0. Labels "silent" through "x-loud" represent a sequence of monotonically non-decreasing volume levels.

Although each attribute individually is optional, it is an error if no attributes are specified when the prosody element is used. The "x-foo " attribute value names are intended to be mnemonics for "extra foo". All units ("Hz", "st") are case-sensitive. Note also that customary pitch levels and standard pitch ranges may vary significantly by language, as may the meanings of the labelled values for pitch targets and ranges.

Number

A number is a simple positive floating point value without exponentials. Legal formats are "n", "n.", ".n" and "n.n" where "n" is a sequence of one or more digits.

Relative values

Relative changes for the attributes above can be specified

• as a percentage (a number optionally preceded by "+" or "-" and followed by "%"), e.g. "3%", "+15.2%", "-8.0%", or
• as a relative number:
  • For the rate attribute, relative changes are a number.
  • For the volume attribute, relative changes are a number preceded by "+" or "-", e.g. "+10", "-5.5".
  • For the pitch and range attributes, relative changes can be given in semitones (a number preceded by "+" or "-" and followed by "st") or in Hertz (a number preceded by "+" or "-" and followed by "Hz"): "+0.5st", "+5st", "-2st", "+10Hz", "-5.5Hz". A semitone is half of a tone (a half step) on the standard diatonic scale.

<?xml version="1.0"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
  The price of XYZ is <prosody rate="-10%">$45</prosody>
</speak>

Pitch contour

The pitch contour is defined as a set of white space-separated targets at specified time positions in the speech output. The algorithm for interpolating between the targets is processor-specific. In each pair of the form (time position,target), the first value is a percentage of the period of the contained text (a number followed by "%") and the second value is the value of the pitch attribute (a number followed by "Hz", a relative change, or a label value). Time position values outside 0% to 100% are ignored. If a pitch value is not defined for 0% or 100% then the nearest pitch target is copied. All relative values for the pitch are relative to the pitch value just before the contained text.

<?xml version="1.0"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
  <prosody contour="(0%,+20Hz) (10%,+30%) (40%,+10Hz)">
    good morning
  </prosody>
</speak>

The duration attribute takes precedence over the rate attribute. The contour attribute takes precedence over the pitch and range attributes.

The default value of all prosodic attributes is no change. For example, omitting the rate attribute means that the rate is the same within the element as outside.

The prosody element can only contain text to be rendered and the following elements: audio, break, emphasis, mark, p, phoneme, prosody, say-as, sub, s, voice.

Limitations

All prosodic attribute values are indicative. If a synthesis processor is unable to accurately render a document as specified (e.g., trying to set the pitch to 1Mhz or the speaking rate to 1,000,000 words per minute), it must make a best effort to continue processing by imposing a limit or a substitute for the specified, unsupported value and may inform the host environment when such limits are exceeded.

In some cases, synthesis processors may elect to ignore a given prosodic markup if the processor determines, for example, that the indicated value is redundant, improper or in error. In particular, concatenative-type synthetic speech systems that employ large acoustic units may reject prosody-modifying markup elements if they are redundant with the prosody of a given acoustic unit(s) or would otherwise result in degraded speech quality.

3.3 Other Elements

3.3.1 audio Element

The audio element supports the insertion of recorded audio files (see Appendix A for required formats) and the insertion of other audio formats in conjunction with synthesized speech output. The audio element may be empty. If the audio element is not empty then the contents should be the marked-up text to be spoken if the audio document is not available. The alternate content may include text, speech markup, desc elements, or other audio elements. The alternate content may also be used when rendering the document to non-audible output and for accessibility (see the desc element). The required attribute is src, which is the URI of a document with an appropriate MIME type.

<?xml version="1.0"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
                 
  <!-- Empty element -->
  Please say your name after the tone.  <audio src="beep.wav"/>

  <!-- Container element with alternative text -->
  <audio src="prompt.au">What city do you want to fly from?</audio>
  <audio src="welcome.wav">  
    <emphasis>Welcome</emphasis> to the Voice Portal. 
  </audio>

</speak>

An audio element is successfully rendered:

1. If the referenced audio source is played, or
2. If the synthesis processor is unable to execute #1 but the alternative content is successfully rendered, or
3. If the processor can detect that text-only output is required and the alternative content is successfully rendered.

Deciding which conditions result in the alternative content being rendered is processor-dependent. If the audio element is not successfully rendered, a synthesis processor should continue processing and should notify the hosting environment. The processor may determine after beginning playback of an audio source that the audio cannot be played in its entirety. For example, encoding problems, network disruptions, etc. may occur. The processor may designate this either as successful or unsuccessful rendering, but it must document this behavior.

The audio element can only contain text to be rendered and the following elements: audio, break, desc, emphasis, mark, p, phoneme, prosody, say-as, sub, s, voice.

3.3.2 mark Element

A mark element is an empty element that places a marker into the text/tag sequence. It has one required attribute, name, which is of type xsd:token [SCHEMA2 §3.3.2]. The mark element can be used to reference a specific location in the text/tag sequence, and can additionally be used to insert a marker into an output stream for asynchronous notification. When processing a mark element, a synthesis processor must do one or both of the following:

• inform the hosting environment with the value of the name attribute and with information allowing the platform to retrieve the corresponding position in the rendered output.
• when audio output of the SSML document reaches the mark, issue an event that includes the required name attribute of the element. The hosting environment defines the destination of the event.

The mark element does not affect the speech output process.

<?xml version="1.0"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
                 
Go from <mark name="here"/> here, to <mark name="there"/> there!

</speak>

3.3.3 desc Element

The desc element can only occur within the content of the audio element. When the audio source referenced in audio is not speech, e.g. audio wallpaper or sonicon punctuation, it should contain a desc element whose textual content is a description of the audio source (e.g. "door slamming"). If text-only output is being produced by the synthesis processor, the content of the desc element(s) should be rendered instead of other alternative content in audio. The optional xml:lang attribute can be used to indicate that the content of the element is in a different language from that of the content surrounding the element. Unlike all other uses of xml:lang in this document, the presence or absence of this attribute will have no effect on the output in the normal case of audio (rather than text) output.

<?xml version="1.0"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
                 
  <!-- Normal use of <desc> -->
  Heads of State often make mistakes when speaking in a foreign language.
  One of the most well-known examples is that of John F. Kennedy:
  <audio src="ichbineinberliner.wav">If you could hear it, this would be
  a recording of John F. Kennedy speaking in Berlin.
    <desc>Kennedy's famous German language gaffe</desc>
  </audio>

  <!-- Suggesting the language of the recording -->
  <!-- Although there is no requirement that a recording be in the current language
       (since it might even be non-speech such as music), an author might wish to
       suggest the language of the recording by marking the entire <audio> element
       using <voice>.  In this case, the xml:lang attribute on <desc> can be used
       to put the description back into the original language. -->
  Here's the same thing again but with a different fallback:
  <voice xml:lang="de-DE">
    <audio src="ichbineinberliner.wav">Ich bin ein Berliner.
      <desc xml:lang="en-US">Kennedy's famous German language gaffe</desc>
    </audio>
  </voice>
</speak>

The desc element can only contain descriptive text.

4. References

4.1 Normative References

[CSS2]

Cascading Style Sheets, level 2: CSS2 Specification, B. Bos, et al., Editors. World Wide Web Consortium, 12 May 1998. This version of the CSS2 Recommendation is http://www.w3.org/TR/1998/REC-CSS2-19980512/. The latest version of CSS2 is available at http://www.w3.org/TR/REC-CSS2/.

[IPAHNDBK]

Handbook of the International Phonetic Association, International Phonetic Association, Editors. Cambridge University Press, July 1999. Information on the Handbook is available at http://www.arts.gla.ac.uk/ipa/handbook.html.

[RFC1521]

MIME (Multipurpose Internet Mail Extensions) Part One: Mechanisms for Specifying and Describing the Format of Internet Message Bodies, N. Borenstein and N. Freed, Editors. IETF, September 1993. This RFC is available at http://www.ietf.org/rfc/rfc1521.txt.

[RFC2045]

Multipurpose Internet Mail Extensions (MIME) Part One: Format of Internet Message Bodies., N. Freed and N. Borenstein, Editors. IETF, November 1996. This RFC is available at http://www.ietf.org/rfc/rfc2045.txt.

[RFC2046]

Multipurpose Internet Mail Extensions (MIME) Part Two: Media Types, N. Freed and N. Borenstein, Editors. IETF, November 1996. This RFC is available at http://www.ietf.org/rfc/rfc2046.txt.

[RFC2119]

Key words for use in RFCs to Indicate Requirement Levels, S. Bradner, Editor. IETF, March 1997. This RFC is available at http://www.ietf.org/rfc/rfc2119.txt.

[RFC2396]

Uniform Resource Identifiers (URI): Generic Syntax, T. Berners-Lee et al., Editors. IETF, August 1998. This RFC is available at http://www.ietf.org/rfc/rfc2396.txt.

[RFC3066]

Tags for the Identification of Languages, H. Alvestrand, Editor. IETF, January 2001. This RFC is available at http://www.ietf.org/rfc/rfc3066.txt.

[SCHEMA1]

XML Schema Part 1: Structures, H. S. Thompson, et al., Editors. World Wide Web Consortium, 2 May 2001. This version of the XML Schema Part 1 Recommendation is http://www.w3.org/TR/2001/REC-xmlschema-1-20010502/. The latest version of XML Schema 1 is available at http://www.w3.org/TR/xmlschema-1/.

[SCHEMA2]

XML Schema Part 2: Datatypes, P.V. Biron and A. Malhotra, Editors. World Wide Web Consortium, 2 May 2001. This version of the XML Schema Part 2 Recommendation is http://www.w3.org/TR/2001/REC-xmlschema-2-20010502/. The latest version of XML Schema 2 is available at http://www.w3.org/TR/xmlschema-2/.

[TYPES]

MIME Media types, IANA. This continually-updated list of media types registered with IANA is available at http://www.iana.org/assignments/media-types/index.html.

[XML]

Extensible Markup Language (XML) 1.0 (Second Edition), T. Bray et al., Editors. World Wide Web Consortium, 6 October 2000. This version of the XML 1.0 Recommendation is http://www.w3.org/TR/2000/REC-xml-20001006. The latest version of XML 1.0 is available at http://www.w3.org/TR/REC-xml.

[XML-BASE]

XML Base, J. Marsh, Editor. World Wide Web Consortium, 27 June 2001. This version of the XML Base Recommendation is http://www.w3.org/TR/2001/REC-xmlbase-20010627/. The latest version of XML Base is available at http://www.w3.org/TR/xmlbase/.

[XMLNS]

Namespaces in XML, T. Bray et al., Editors. World Wide Web Consortium, 14 January 1999. This version of the XML Namespaces Recommendation is http://www.w3.org/TR/1999/REC-xml-names-19990114/. The latest version of XML Namespaces is available at http://www.w3.org/TR/REC-xml-names/.

4.2 Informative References

[DC]

Dublin Core Metadata Initiative. See http://dublincore.org/

[HTML]

HTML 4.01 Specification, D. Raggett et al., Editors. World Wide Web Consortium, 24 December 1999. This version of the HTML 4 Recommendation is http://www.w3.org/TR/1999/REC-html401-19991224/. The latest version of HTML 4 is available at http://www.w3.org/TR/html4/.

[IPA]

International Phonetic Association. See http://www.arts.gla.ac.uk/ipa/ipa.html for the organization's website.

[IPAUNICODE1]

The International Phonetic Alphabet, J. Esling. This table of IPA characters in Unicode is available at http://web.uvic.ca/ling/resources/ipa/charts/unicode_ipa-chart.htm.

[IPAUNICODE2]

The International Phonetic Alphabet in Unicode, J. Wells. This table of Unicode values for IPA characters is available at http://www.phon.ucl.ac.uk/home/wells/ipa-unicode.htm.

[JEIDAALPHABET]

JEIDA-62-2000 Phoneme Alphabet. JEITA. An abstract of this document (in Japanese) is available at http://it.jeita.or.jp/document/publica/standard/summary/JEIDA-62-2000.pdf.

[JEITA]

Japan Electronics and Information Technology Industries Association. See http://www.jeita.or.jp/.

[JSML]

JSpeech Markup Language, A. Hunt, Editor. World Wide Web Consortium, 5 June 2000. Copyright ©2000 Sun Microsystems, Inc. This version of the JSML submission is http://www.w3.org/TR/2000/NOTE-jsml-20000605/. The latest W3C Note of JSML is available at http://www.w3.org/TR/jsml/.

[LEX]

Pronunciation Lexicon Markup Requirements, F. Scahill, Editor. World Wide Web Consortium, 12 March 2001. This document is a work in progress. This version of the Lexicon Requirements is http://www.w3.org/TR/2001/WD-lexicon-reqs-20010312/. The latest version of the Lexicon Requirements is available at http://www.w3.org/TR/lexicon-reqs/.

[RDF]

RDF Primer, F. Manola and E. Miller, Editors. World Wide Web Consortium, 10 February 2004. This version of the RDF Primer Recommendation is http://www.w3.org/TR/2004/REC-rdf-primer-20040210/. The latest version of the RDF Primer is available at http://www.w3.org/TR/rdf-primer/.

[RDF-XMLSYNTAX]

RDF/XML Syntax Specification, D. Beckett, Editor. World Wide Web Consortium, 10 February 2004. This version of the RDF/XML Syntax Recommendation is http://www.w3.org/TR/2004/REC-rdf-syntax-grammar-20040210/. The latest version of the RDF XML Syntax is available at http://www.w3.org/TR/rdf-syntax-grammar/.

[RDF-SCHEMA]

RDF Vocabulary Description Language 1.0: RDF Schema, D. Brickley and R. Guha, Editors. World Wide Web Consortium, 10 February 2004. This version of the RDF Schema Recommendation is http://www.w3.org/TR/2004/REC-rdf-schema-20040210/. The latest version of RDF Schema is available at http://www.w3.org/TR/rdf-schema/.

[REQS]

Speech Synthesis Markup Requirements for Voice Markup Languages, A. Hunt, Editor. World Wide Web Consortium, 23 December 1999. This document is a work in progress. This version of the Synthesis Requirements is http://www.w3.org/TR/1999/WD-voice-tts-reqs-19991223/. The latest version of the Synthesis Requirements is available at http://www.w3.org/TR/voice-tts-reqs/.

[RFC2616]

Hypertext Transfer Protocol -- HTTP/1.1, R. Fielding, et al., Editors. IETF, June 1999. This RFC is available at http://www.ietf.org/rfc/rfc2616.txt.

[RFC2732]

Format for Literal IPv6 Addresses in URL's, R. Hinden, et al., Editors. IETF, December 1999. This RFC is available at http://www.ietf.org/rfc/rfc2732.txt.

[SABLE]

"SABLE: A Standard for TTS Markup", Richard Sproat, et al. Proceedings of the International Conference on Spoken Language Processing, R. Mannell and J. Robert-Ribes, Editors. Causal Productions Pty Ltd (Adelaide), 1998. Vol. 5, pp. 1719-1722. Conference proceedings are available from the publisher at http://www.causalproductions.com/.

[SMIL]

Synchronized Multimedia Integration Language (SMIL 2.0), J. Ayars, et al., Editors. World Wide Web Consortium, 7 August 2001. This version of the SMIL 2 Recommendation is http://www.w3.org/TR/2001/REC-smil20-20010807/. The latest version of SMIL2 is available at http://www.w3.org/TR/smil20/.

[UNICODE]

The Unicode Standard. The Unicode Consortium. Information about the Unicode Standard and its versions can be found at http://www.unicode.org/standard/standard.html.

[VXML]

Voice Extensible Markup Language (VoiceXML) Version 2.0, S. McGlashan, et al., Editors. World Wide Web Consortium, 16 March 2004. This version of the VoiceXML 2.0 Recommendation is http://www.w3.org/TR/2004/REC-voicexml20-20040316/. The latest version of VoiceXML 2 is available at http://www.w3.org/TR/voicexml20/.

5. Acknowledgments

This document was written with the participation of the following participants in the W3C Voice Browser Working Group (listed in alphabetical order):

Paolo Baggia, Loquendo
Dan Burnett, Nuance
Dave Burke, Voxpilot
Jerry Carter, Independent Consultant
Sasha Caskey, IBM
Brian Eberman, ScanSoft
Andrew Hunt, ScanSoft
Jim Larson, Intel
Bruce Lucas, IBM
Scott McGlashan, HP
T.V. Raman, IBM
Dave Raggett, W3C/Canon
Laura Ricotti, Loquendo
Richard Sproat, ATT
Luc Van Tichelen, ScanSoft
Mark Walker, Intel
Kuansan Wang, Microsoft
Dave Wood, Microsoft

Appendix A: Audio File Formats

This appendix is normative.

SSML requires that a platform support the playing of the audio formats specified below.

The 'audio/basic' MIME type is commonly used with the 'au' header format as well as the headerless 8-bit 8Khz mu-law format. If this MIME type is specified for playing, the mu-law format must be used. For playback with the 'audio/basic' MIME type, processors must support the mu-law format and may support the 'au' format.

Appendix B: Internationalization

This appendix is normative.

SSML is an application of XML 1.0 [XML] and thus supports [UNICODE] which defines a standard universal character set.

SSML provides a mechanism for control of the spoken language via the use of the xml:lang attribute. Language changes can occur as frequently as per word, although excessive language changes can diminish the output audio quality. SSML also permits finer control over output pronunciations via the lexicon and phoneme elements, features that can help to mitigate poor quality default lexicons for languages with only minimal commercial support today.

Appendix C: MIME Types and File Suffix

This appendix is normative.

The W3C Voice Browser Working Group has applied to IETF to register a MIME type for the Speech Synthesis Markup Language. The current proposal is to use "application/ssml+xml".

The W3C Voice Browser Working Group has adopted the convention of using the ".ssml" filename suffix for Speech Synthesis Markup Language documents where speak is the root element.

Appendix D: Schema for the Speech Synthesis Markup Language

This appendix is normative.

The synthesis schema is located at http://www.w3.org/TR/speech-synthesis/synthesis.xsd.

Note: the synthesis schema includes a no-namespace core schema, located at http://www.w3.org/TR/speech-synthesis/synthesis-core.xsd, which may be used as a basis for specifying Speech Synthesis Markup Language Fragments (Sec. 2.2.1) embedded in non-synthesis namespace schemas.

Appendix E: DTD for the Speech Synthesis Markup Language

This appendix is informative.

The SSML DTD is located at http://www.w3.org/TR/speech-synthesis/synthesis.dtd.

Due to DTD limitations, the SSML DTD does not correctly express that the metadata element can contain elements from other XML namespaces.

Appendix F: Example SSML

This appendix is informative.

The following is an example of reading headers of email messages. The p and s elements are used to mark the text structure. The break element is placed before the time and has the effect of marking the time as important information for the listener to pay attention to. The prosody element is used to slow the speaking rate of the email subject so that the user has extra time to listen and write down the details.

<?xml version="1.0"?>
<!DOCTYPE speak PUBLIC "-//W3C//DTD SYNTHESIS 1.0//EN"
                  "http://www.w3.org/TR/speech-synthesis/synthesis.dtd">
<speak version="1.0"
       xmlns="http://www.w3.org/2001/10/synthesis"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
       xml:lang="en-US">
  <p>
    <s>You have 4 new messages.</s>
    <s>The first is from Stephanie Williams and arrived at <break/> 3:45pm.
    </s>
    <s>
      The subject is <prosody rate="-20%">ski trip</prosody>
    </s>

  </p>
</speak>

The following example combines audio files and different spoken voices to provide information on a collection of music.

<?xml version="1.0"?>
<!DOCTYPE speak PUBLIC "-//W3C//DTD SYNTHESIS 1.0//EN"
                  "http://www.w3.org/TR/speech-synthesis/synthesis.dtd">
<speak version="1.0"
       xmlns="http://www.w3.org/2001/10/synthesis"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
       xml:lang="en-US">

  <p>
    <voice gender="male">
      <s>Today we preview the latest romantic music from Example.</s>

      <s>Hear what the Software Reviews said about Example's newest hit.</s>
    </voice>
  </p>

  <p>
    <voice gender="female">
      He sings about issues that touch us all.
    </voice>
  </p>

  <p>
    <voice gender="male">
      Here's a sample.  <audio src="http://www.example.com/music.wav"/>
      Would you like to buy it?
    </voice>
  </p>

</speak>

It is often the case that an author wishes to include a bit of foreign text (say, a movie title) in an application without having to switch languages (for example via the voice element). A simple way to do this is shown here. In this example the synthesis processor would render the movie name using the pronunciation rules of the container language ("en-US" in this case), similar to how a reader who doesn't know the foreign language might try to read (and pronounce) it.

<?xml version="1.0" encoding="ISO-8859-1"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
  
  The title of the movie is:
  "La vita è bella"
  (Life is beautiful),
  which is directed by Roberto Benigni.
</speak>

With some additional work the output quality can be improved tremendously either by creating a custom pronunciation in an external lexicon (see Section 3.1.4) or via the phoneme element as shown in the next example.

It is worth noting that IPA alphabet support is an optional feature and that phonemes for an external language may be rendered with some approximation (see Section 3.1.4 for details). The following example only uses phonemes common to US English.

<?xml version="1.0" encoding="ISO-8859-1"?>
<speak version="1.0" xmlns="http://www.w3.org/2001/10/synthesis"
         xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
         xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
         xml:lang="en-US">
  
  The title of the movie is: 
  <phoneme alphabet="ipa"
    ph="&#x2C8;l&#x251; &#x2C8;vi&#x2D0;&#x27E;&#x259; &#x2C8;&#x294;e&#x26A; &#x2C8;b&#x25B;l&#x259;"> 
  La vita è bella </phoneme>
  <!-- The IPA pronunciation is ˈlɑ ˈviːɾə ˈʔeɪ ˈbɛlə -->
  (Life is beautiful), 
  which is directed by 
  <phoneme alphabet="ipa"
    ph="&#x279;&#x259;&#x2C8;b&#x25B;&#x2D0;&#x279;&#x27E;o&#x28A; b&#x25B;&#x2C8;ni&#x2D0;nji"> 
  Roberto Benigni </phoneme>
  <!-- The IPA pronunciation is ɹəˈbɛːɹɾoʊ bɛˈniːnji -->

  <!-- Note that in actual practice an author might change the
     encoding to UTF-8 and directly use the Unicode characters in
     the document rather than using the escapes as shown.
     The escaped values are shown for ease of copying. -->
</speak>

SMIL Integration Example

The SMIL language [SMIL] is an XML-based multimedia control language. It is especially well suited for describing dynamic media applications that include synthetic speech output.

File 'greetings.ssml' contains the following:

<?xml version="1.0"?>
<!DOCTYPE speak PUBLIC "-//W3C//DTD SYNTHESIS 1.0//EN"
                  "http://www.w3.org/TR/speech-synthesis/synthesis.dtd">

<speak version="1.0"
       xmlns="http://www.w3.org/2001/10/synthesis"
       xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"
       xsi:schemaLocation="http://www.w3.org/2001/10/synthesis
                   http://www.w3.org/TR/speech-synthesis/synthesis.xsd"
       xml:lang="en-US">

  <s>
    <mark name="greetings"/>
    <emphasis>Greetings</emphasis> from the <sub alias="World Wide Web Consortium">W3C</sub>!
  </s>
</speak>

SMIL Example 1: W3C logo image appears, and then one second later, the speech sequence is rendered. File 'greetings.smil' contains the following:

<smil xmlns="http://www.w3.org/2001/SMIL20/Language">
  <head>
    <top-layout width="640" height="320">
      <region id="whole" width="640" height="320"/>
    </top-layout>
  </head>
  <body>
    <par>
      <img src="http://www.w3.org/Icons/w3c_home" region="whole" begin="0s"/>
      <ref src="greetings.ssml" begin="1s"/>
    </par>
  </body>
</smil>

SMIL Example 2: W3C logo image appears, then clicking on the image causes it to disappear and the speech sequence to be rendered. File 'greetings.smil' contains the following:

<smil xmlns="http://www.w3.org/2001/SMIL20/Language">
  <head>
    <top-layout width="640" height="320">
      <region id="whole" width="640" height="320"/>
    </top-layout>
  </head>
  <body>
    <seq>
      <img id="logo" src="http://w3clogo.gif" region="whole" begin="0s" end="logo.activateEvent"/>
      <ref src="greetings.ssml"/>
    </seq>
  </body>
</smil>

VoiceXML Integration Example

<?xml version="1.0" encoding="UTF-8"?> 
<vxml version="2.0" xmlns="http://www.w3.org/2001/vxml" 
  xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" 
  xsi:schemaLocation="http://www.w3.org/2001/vxml 
   http://www.w3.org/TR/voicexml20/vxml.xsd">
   <form>
      <block>
         <prompt>
           <emphasis>Welcome</emphasis> to the Bird Seed Emporium.
           <audio src="rtsp://www.birdsounds.example.com/thrush.wav"/>
           We have 250 kilogram drums of thistle seed for
           $299.95
           plus shipping and handling this month.
           <audio src="http://www.birdsounds.example.com/mourningdove.wav"/>
         </prompt>
      </block>
   </form>
</vxml>

Appendix G: Summary of changes since the Candidate Recommendation

This is a list of the major changes to the specification since the Candidate Recommendation:

• Removed unused definition of "Fatal Error" in section 1.5. (CR155)
• Updated references to and descriptions of RDF in sections 3.1.5, 3.1.6, and 4. (CR166)
• Removed "addition of XML declaration" in section 2.2.1. (CR170)
• Revised 1.2, bullet 4, to remove implication that all processors use phonemes as the base acoustic units. (CR183)
• Clarified in 3.2.4 that use of the <prosody> element with no attributes is an error. (CR184)
• Clarified in 3.2.1 that use of the <voice> element with no attributes is an error. (CR185)
• Changed audio/wav to audio/x-wav in Appendix A because the former type is not yet registered with IANA. (CR186)
• Updated ToC and section titles to match. (CR190)
• Updated informative bibliography reference to VoiceXML 2.0 to point to Recommendation.
• Added missing "(SSML)" to title.
• Linked instances of "error" to definition in section 1.5.
• Removed reference to HTML from 3.1.5. (CR191)
• Miscellaneous editorial fixes