segment polygonal mesh based on shared edge connectivity More...

#include <vtkPolyDataEdgeConnectivityFilter.h>

Inheritance diagram for vtkPolyDataEdgeConnectivityFilter:

Collaboration diagram for vtkPolyDataEdgeConnectivityFilter:

Public Types
enum	RegionGrowingType { RegionGrowingOff = 0 , LargeRegions = 1 , SmallRegions = 2 }

Public Types inherited from vtkPolyDataAlgorithm
typedef vtkAlgorithm	Superclass

Public Types inherited from vtkAlgorithm
enum	DesiredOutputPrecision { SINGLE_PRECISION , DOUBLE_PRECISION , DEFAULT_PRECISION }
	Values used for setting the desired output precision for various algorithms. More...

typedef vtkObject	Superclass

Public Member Functions
void	InitializeSeedList ()
	Initialize list of point ids/cell ids used to seed regions. More...

void	AddSeed (int id)
	Add a seed id (point or cell id). More...

void	DeleteSeed (int id)
	Delete a seed id (point or cell id). More...

void	InitializeSpecifiedRegionList ()
	Initialize list of region ids to extract. More...

void	AddSpecifiedRegion (int id)
	Add a region id to extract. More...

void	DeleteSpecifiedRegion (int id)
	Delete a region id to extract. More...

int	GetNumberOfSpecifiedRegions ()
	Get number of specified regions. More...

int	GetNumberOfExtractedRegions ()
	Obtain the number of connected regions found. More...

double	GetTotalArea ()
	Obtain the total area of all regions combined. More...


virtual void	SetExtractionMode (int)
	Control the extraction of connected surfaces. More...

virtual int	GetExtractionMode ()
	Control the extraction of connected surfaces. More...

void	SetExtractionModeToPointSeededRegions ()
	Control the extraction of connected surfaces. More...

void	SetExtractionModeToCellSeededRegions ()
	Control the extraction of connected surfaces. More...

void	SetExtractionModeToLargestRegion ()
	Control the extraction of connected surfaces. More...

void	SetExtractionModeToSpecifiedRegions ()
	Control the extraction of connected surfaces. More...

void	SetExtractionModeToClosestPointRegion ()
	Control the extraction of connected surfaces. More...

void	SetExtractionModeToLargeRegions ()
	Control the extraction of connected surfaces. More...

void	SetExtractionModeToAllRegions ()
	Control the extraction of connected surfaces. More...

const char *	GetExtractionModeAsString ()
	Return the method of extraction as a string. More...


virtual void	SetBarrierEdges (vtkTypeBool)
	Control connectivity traversal based on barrier edges. More...

virtual vtkTypeBool	GetBarrierEdges ()
	Control connectivity traversal based on barrier edges. More...

virtual void	BarrierEdgesOn ()
	Control connectivity traversal based on barrier edges. More...

virtual void	BarrierEdgesOff ()
	Control connectivity traversal based on barrier edges. More...


void	SetSourceData (vtkPolyData *)
	Specify the source vtkPolyData object used to specify barrier edges (this is an optional connection.) If specified, the connected traversal cannot traverse across the edges indicated as they are defined as barrier edges. More...

void	SetSourceConnection (vtkAlgorithmOutput *algOutput)
	Specify the source vtkPolyData object used to specify barrier edges (this is an optional connection.) If specified, the connected traversal cannot traverse across the edges indicated as they are defined as barrier edges. More...

vtkPolyData *	GetSource ()
	Specify the source vtkPolyData object used to specify barrier edges (this is an optional connection.) If specified, the connected traversal cannot traverse across the edges indicated as they are defined as barrier edges. More...


virtual void	SetBarrierEdgeLength (double, double)
	Edges E of length edgeLen (BarrierEdgeLength[0]<=edgeLen<=BarrierEdgeLength[1]) define barrier edges. More...

void	SetBarrierEdgeLength (double[2])
	Edges E of length edgeLen (BarrierEdgeLength[0]<=edgeLen<=BarrierEdgeLength[1]) define barrier edges. More...

virtual double *	GetBarrierEdgeLength ()
	Edges E of length edgeLen (BarrierEdgeLength[0]<=edgeLen<=BarrierEdgeLength[1]) define barrier edges. More...

virtual void	GetBarrierEdgeLength (double &, double &)
	Edges E of length edgeLen (BarrierEdgeLength[0]<=edgeLen<=BarrierEdgeLength[1]) define barrier edges. More...

virtual void	GetBarrierEdgeLength (double[2])
	Edges E of length edgeLen (BarrierEdgeLength[0]<=edgeLen<=BarrierEdgeLength[1]) define barrier edges. More...


virtual void	SetScalarConnectivity (vtkTypeBool)
	Turn on/off connectivity based on scalar value. More...

virtual vtkTypeBool	GetScalarConnectivity ()
	Turn on/off connectivity based on scalar value. More...

virtual void	ScalarConnectivityOn ()
	Turn on/off connectivity based on scalar value. More...

virtual void	ScalarConnectivityOff ()
	Turn on/off connectivity based on scalar value. More...


virtual void	SetScalarRange (double, double)
	Set the scalar range to extract cells based on scalar connectivity. More...

void	SetScalarRange (double[2])
	Set the scalar range to extract cells based on scalar connectivity. More...

virtual double *	GetScalarRange ()
	Set the scalar range to extract cells based on scalar connectivity. More...

virtual void	GetScalarRange (double &, double &)
	Set the scalar range to extract cells based on scalar connectivity. More...

virtual void	GetScalarRange (double[2])
	Set the scalar range to extract cells based on scalar connectivity. More...


virtual vtkIdTypeArray *	GetRegionSizes ()
	Obtain the array containing the region sizes of the extracted regions. More...


virtual void	SetClosestPoint (double, double, double)
	Use to specify x-y-z point coordinates when extracting the region closest to a specified point. More...

virtual void	SetClosestPoint (double[3])
	Use to specify x-y-z point coordinates when extracting the region closest to a specified point. More...

virtual double *	GetClosestPoint ()
	Use to specify x-y-z point coordinates when extracting the region closest to a specified point. More...

virtual void	GetClosestPoint (double data[3])
	Use to specify x-y-z point coordinates when extracting the region closest to a specified point. More...


virtual void	SetRegionGrowing (int)
	Specify a strategy for region growing. More...

virtual int	GetRegionGrowing ()
	Specify a strategy for region growing. More...

void	SetRegionGrowingOff ()
	Specify a strategy for region growing. More...

void	GrowLargeRegionsOff ()
	Specify a strategy for region growing. More...

void	GrowSmallRegionsOff ()
	Specify a strategy for region growing. More...

void	SetRegionGrowingToLargeRegions ()
	Specify a strategy for region growing. More...

void	GrowLargeRegionsOn ()
	Specify a strategy for region growing. More...

void	SetRegionGrowingToSmallRegions ()
	Specify a strategy for region growing. More...

void	GrowSmallRegionsOn ()
	Specify a strategy for region growing. More...


virtual void	SetLargeRegionThreshold (double)
	Define what a large region is by specifying the fraction of total input mesh area a region must be in order to be considered large. More...

virtual double	GetLargeRegionThreshold ()
	Define what a large region is by specifying the fraction of total input mesh area a region must be in order to be considered large. More...


virtual void	SetColorRegions (vtkTypeBool)
	Turn on/off the coloring of edge-connected regions. More...

virtual vtkTypeBool	GetColorRegions ()
	Turn on/off the coloring of edge-connected regions. More...

virtual void	ColorRegionsOn ()
	Turn on/off the coloring of edge-connected regions. More...

virtual void	ColorRegionsOff ()
	Turn on/off the coloring of edge-connected regions. More...


virtual void	SetCellRegionAreas (vtkTypeBool)
	Turn on/off the creation of a cell array that, for each cell, contains the area of the region to which the cell is associated. More...

virtual vtkTypeBool	GetCellRegionAreas ()
	Turn on/off the creation of a cell array that, for each cell, contains the area of the region to which the cell is associated. More...

virtual void	CellRegionAreasOn ()
	Turn on/off the creation of a cell array that, for each cell, contains the area of the region to which the cell is associated. More...

virtual void	CellRegionAreasOff ()
	Turn on/off the creation of a cell array that, for each cell, contains the area of the region to which the cell is associated. More...


virtual void	SetOutputPointsPrecision (int)
	Set/get the desired precision for the output types. More...

virtual int	GetOutputPointsPrecision ()
	Set/get the desired precision for the output types. More...

Public Member Functions inherited from vtkPolyDataAlgorithm
virtual vtkTypeBool	IsA (const char *type)
	Return 1 if this class is the same type of (or a subclass of) the named class. More...

vtkPolyDataAlgorithm *	NewInstance () const

void	PrintSelf (ostream &os, vtkIndent indent) override
	Methods invoked by print to print information about the object including superclasses. More...

vtkTypeBool	ProcessRequest (vtkInformation , vtkInformationVector , vtkInformationVector ) override
	see vtkAlgorithm for details More...

vtkDataObject *	GetInput ()

vtkDataObject *	GetInput (int port)

vtkPolyData *	GetPolyDataInput (int port)

vtkPolyData *	GetOutput ()
	Get the output data object for a port on this algorithm. More...

vtkPolyData *	GetOutput (int)
	Get the output data object for a port on this algorithm. More...

virtual void	SetOutput (vtkDataObject *d)
	Get the output data object for a port on this algorithm. More...

void	SetInputData (vtkDataObject *)
	Assign a data object as input. More...

void	SetInputData (int, vtkDataObject *)
	Assign a data object as input. More...

void	AddInputData (vtkDataObject *)
	Assign a data object as input. More...

void	AddInputData (int, vtkDataObject *)
	Assign a data object as input. More...

Public Member Functions inherited from vtkAlgorithm
virtual vtkTypeBool	IsA (const char *type)
	Return 1 if this class is the same type of (or a subclass of) the named class. More...

vtkAlgorithm *	NewInstance () const

void	PrintSelf (ostream &os, vtkIndent indent) override
	Methods invoked by print to print information about the object including superclasses. More...

int	HasExecutive ()
	Check whether this algorithm has an assigned executive. More...

vtkExecutive *	GetExecutive ()
	Get this algorithm's executive. More...

virtual void	SetExecutive (vtkExecutive *executive)
	Set this algorithm's executive. More...

virtual vtkTypeBool	ProcessRequest (vtkInformation request, vtkInformationVector inInfo, vtkInformationVector outInfo)
	Upstream/Downstream requests form the generalized interface through which executives invoke a algorithm's functionality. More...

vtkTypeBool	ProcessRequest (vtkInformation request, vtkCollection inInfo, vtkInformationVector *outInfo)
	Version of ProcessRequest() that is wrapped. More...

virtual int	ComputePipelineMTime (vtkInformation request, vtkInformationVector inInfoVec, vtkInformationVector outInfoVec, int requestFromOutputPort, vtkMTimeType *mtime)
	A special version of ProcessRequest meant specifically for the pipeline modified time request. More...

virtual int	ModifyRequest (vtkInformation *request, int when)
	This method gives the algorithm a chance to modify the contents of a request before or after (specified in the when argument) it is forwarded. More...

vtkInformation *	GetInputPortInformation (int port)
	Get the information object associated with an input port. More...

vtkInformation *	GetOutputPortInformation (int port)
	Get the information object associated with an output port. More...

int	GetNumberOfInputPorts ()
	Get the number of input ports used by the algorithm. More...

int	GetNumberOfOutputPorts ()
	Get the number of output ports provided by the algorithm. More...

void	SetProgress (double)
	`SetProgress` is deprecated. More...

void	UpdateProgress (double amount)
	Update the progress of the process object. More...

virtual void	SetInputArrayToProcess (int idx, int port, int connection, const char fieldAssociation, const char attributeTypeorName)
	String based versions of SetInputArrayToProcess(). More...

vtkInformation *	GetInputArrayInformation (int idx)
	Get the info object for the specified input array to this algorithm. More...

void	RemoveAllInputs ()
	Remove all the input data. More...

vtkDataObject *	GetOutputDataObject (int port)
	Get the data object that will contain the algorithm output for the given port. More...

vtkDataObject *	GetInputDataObject (int port, int connection)
	Get the data object that will contain the algorithm input for the given port and given connection. More...

virtual void	RemoveInputConnection (int port, vtkAlgorithmOutput *input)
	Remove a connection from the given input port index. More...

virtual void	RemoveInputConnection (int port, int idx)
	Remove a connection given by index idx. More...

virtual void	RemoveAllInputConnections (int port)
	Removes all input connections. More...

virtual void	SetInputDataObject (int port, vtkDataObject *data)
	Sets the data-object as an input on the given port index. More...

virtual void	SetInputDataObject (vtkDataObject *data)

virtual void	AddInputDataObject (int port, vtkDataObject *data)
	Add the data-object as an input to this given port. More...

virtual void	AddInputDataObject (vtkDataObject *data)

vtkAlgorithmOutput *	GetOutputPort (int index)
	Get a proxy object corresponding to the given output port of this algorithm. More...

vtkAlgorithmOutput *	GetOutputPort ()

int	GetNumberOfInputConnections (int port)
	Get the number of inputs currently connected to a port. More...

int	GetTotalNumberOfInputConnections ()
	Get the total number of inputs for this algorithm. More...

vtkAlgorithmOutput *	GetInputConnection (int port, int index)
	Get the algorithm output port connected to an input port. More...

vtkAlgorithm *	GetInputAlgorithm (int port, int index, int &algPort)
	Returns the algorithm and the output port index of that algorithm connected to a port-index pair. More...

vtkAlgorithm *	GetInputAlgorithm (int port, int index)
	Returns the algorithm connected to a port-index pair. More...

vtkAlgorithm *	GetInputAlgorithm ()
	Equivalent to GetInputAlgorithm(0, 0). More...

vtkExecutive *	GetInputExecutive (int port, int index)
	Returns the executive associated with a particular input connection. More...

vtkExecutive *	GetInputExecutive ()
	Equivalent to GetInputExecutive(0, 0) More...

vtkInformation *	GetInputInformation (int port, int index)
	Return the information object that is associated with a particular input connection. More...

vtkInformation *	GetInputInformation ()
	Equivalent to GetInputInformation(0, 0) More...

vtkInformation *	GetOutputInformation (int port)
	Return the information object that is associated with a particular output port. More...

virtual vtkTypeBool	Update (int port, vtkInformationVector *requests)
	This method enables the passing of data requests to the algorithm to be used during execution (in addition to bringing a particular port up-to-date). More...

virtual vtkTypeBool	Update (vtkInformation *requests)
	Convenience method to update an algorithm after passing requests to its first output port. More...

virtual int	UpdatePiece (int piece, int numPieces, int ghostLevels, const int extents[6]=nullptr)
	Convenience method to update an algorithm after passing requests to its first output port. More...

virtual int	UpdateExtent (const int extents[6])
	Convenience method to update an algorithm after passing requests to its first output port. More...

virtual int	UpdateTimeStep (double time, int piece=-1, int numPieces=1, int ghostLevels=0, const int extents[6]=nullptr)
	Convenience method to update an algorithm after passing requests to its first output port. More...

virtual void	UpdateInformation ()
	Bring the algorithm's information up-to-date. More...

virtual void	UpdateDataObject ()
	Create output object(s). More...

virtual void	PropagateUpdateExtent ()
	Propagate meta-data upstream. More...

virtual void	UpdateWholeExtent ()
	Bring this algorithm's outputs up-to-date. More...

void	ConvertTotalInputToPortConnection (int ind, int &port, int &conn)
	Convenience routine to convert from a linear ordering of input connections to a port/connection pair. More...

virtual vtkInformation *	GetInformation ()
	Set/Get the information object associated with this algorithm. More...

virtual void	SetInformation (vtkInformation *)
	Set/Get the information object associated with this algorithm. More...

void	Register (vtkObjectBase *o) override
	Participate in garbage collection. More...

void	UnRegister (vtkObjectBase *o) override
	Participate in garbage collection. More...

virtual void	SetAbortExecute (vtkTypeBool)
	Set/Get the AbortExecute flag for the process object. More...

virtual vtkTypeBool	GetAbortExecute ()
	Set/Get the AbortExecute flag for the process object. More...

virtual void	AbortExecuteOn ()
	Set/Get the AbortExecute flag for the process object. More...

virtual void	AbortExecuteOff ()
	Set/Get the AbortExecute flag for the process object. More...

virtual double	GetProgress ()
	Get the execution progress of a process object. More...

void	SetProgressShiftScale (double shift, double scale)
	Specify the shift and scale values to use to apply to the progress amount when `UpdateProgress` is called. More...

virtual double	GetProgressShift ()
	Specify the shift and scale values to use to apply to the progress amount when `UpdateProgress` is called. More...

virtual double	GetProgressScale ()
	Specify the shift and scale values to use to apply to the progress amount when `UpdateProgress` is called. More...

void	SetProgressText (const char *ptext)
	Set the current text message associated with the progress state. More...

virtual char *	GetProgressText ()
	Set the current text message associated with the progress state. More...

virtual unsigned long	GetErrorCode ()
	The error code contains a possible error that occurred while reading or writing the file. More...

virtual void	SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, const char *name)
	Set the input data arrays that this algorithm will process. More...

virtual void	SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, int fieldAttributeType)
	Set the input data arrays that this algorithm will process. More...

virtual void	SetInputArrayToProcess (int idx, vtkInformation *info)
	Set the input data arrays that this algorithm will process. More...

virtual void	SetInputConnection (int port, vtkAlgorithmOutput *input)
	Set the connection for the given input port index. More...

virtual void	SetInputConnection (vtkAlgorithmOutput *input)
	Set the connection for the given input port index. More...

virtual void	AddInputConnection (int port, vtkAlgorithmOutput *input)
	Add a connection to the given input port index. More...

virtual void	AddInputConnection (vtkAlgorithmOutput *input)
	Add a connection to the given input port index. More...

virtual void	Update (int port)
	Bring this algorithm's outputs up-to-date. More...

virtual void	Update ()
	Bring this algorithm's outputs up-to-date. More...

virtual void	SetReleaseDataFlag (int)
	Turn release data flag on or off for all output ports. More...

virtual int	GetReleaseDataFlag ()
	Turn release data flag on or off for all output ports. More...

void	ReleaseDataFlagOn ()
	Turn release data flag on or off for all output ports. More...

void	ReleaseDataFlagOff ()
	Turn release data flag on or off for all output ports. More...

int	UpdateExtentIsEmpty (vtkInformation pinfo, vtkDataObject output)
	This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...

int	UpdateExtentIsEmpty (vtkInformation *pinfo, int extentType)
	This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...

int *	GetUpdateExtent ()
	These functions return the update extent for output ports that use 3D extents. More...

int *	GetUpdateExtent (int port)
	These functions return the update extent for output ports that use 3D extents. More...

void	GetUpdateExtent (int &x0, int &x1, int &y0, int &y1, int &z0, int &z1)
	These functions return the update extent for output ports that use 3D extents. More...

void	GetUpdateExtent (int port, int &x0, int &x1, int &y0, int &y1, int &z0, int &z1)
	These functions return the update extent for output ports that use 3D extents. More...

void	GetUpdateExtent (int extent[6])
	These functions return the update extent for output ports that use 3D extents. More...

void	GetUpdateExtent (int port, int extent[6])
	These functions return the update extent for output ports that use 3D extents. More...

int	GetUpdatePiece ()
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdatePiece (int port)
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdateNumberOfPieces ()
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdateNumberOfPieces (int port)
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdateGhostLevel ()
	These functions return the update extent for output ports that use piece extents. More...

int	GetUpdateGhostLevel (int port)
	These functions return the update extent for output ports that use piece extents. More...

void	SetProgressObserver (vtkProgressObserver *)
	If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...

virtual vtkProgressObserver *	GetProgressObserver ()
	If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...

Public Member Functions inherited from vtkObject
	vtkBaseTypeMacro (vtkObject, vtkObjectBase)

virtual void	DebugOn ()
	Turn debugging output on. More...

virtual void	DebugOff ()
	Turn debugging output off. More...

bool	GetDebug ()
	Get the value of the debug flag. More...

void	SetDebug (bool debugFlag)
	Set the value of the debug flag. More...

virtual void	Modified ()
	Update the modification time for this object. More...

virtual vtkMTimeType	GetMTime ()
	Return this object's modified time. More...

void	PrintSelf (ostream &os, vtkIndent indent) override
	Methods invoked by print to print information about the object including superclasses. More...

void	RemoveObserver (unsigned long tag)

void	RemoveObservers (unsigned long event)

void	RemoveObservers (const char *event)

void	RemoveAllObservers ()

vtkTypeBool	HasObserver (unsigned long event)

vtkTypeBool	HasObserver (const char *event)

int	InvokeEvent (unsigned long event)

int	InvokeEvent (const char *event)

unsigned long	AddObserver (unsigned long event, vtkCommand *, float priority=0.0f)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

unsigned long	AddObserver (const char event, vtkCommand , float priority=0.0f)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkCommand *	GetCommand (unsigned long tag)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObserver (vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObservers (unsigned long event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObservers (const char event, vtkCommand )
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkTypeBool	HasObserver (unsigned long event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkTypeBool	HasObserver (const char event, vtkCommand )
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f)
	Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, void(T::callback)(vtkObject , unsigned long, void *), float priority=0.0f)
	Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, bool(T::callback)(vtkObject , unsigned long, void *), float priority=0.0f)
	Allow user to set the AbortFlagOn() with the return value of the callback method. More...

int	InvokeEvent (unsigned long event, void *callData)
	This method invokes an event and return whether the event was aborted or not. More...

int	InvokeEvent (const char event, void callData)
	This method invokes an event and return whether the event was aborted or not. More...

Public Member Functions inherited from vtkObjectBase
const char *	GetClassName () const
	Return the class name as a string. More...

virtual vtkTypeBool	IsA (const char *name)
	Return 1 if this class is the same type of (or a subclass of) the named class. More...

virtual vtkIdType	GetNumberOfGenerationsFromBase (const char *name)
	Given the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More...

virtual void	Delete ()
	Delete a VTK object. More...

virtual void	FastDelete ()
	Delete a reference to this object. More...

void	InitializeObjectBase ()

void	Print (ostream &os)
	Print an object to an ostream. More...

virtual void	Register (vtkObjectBase *o)
	Increase the reference count (mark as used by another object). More...

virtual void	UnRegister (vtkObjectBase *o)
	Decrease the reference count (release by another object). More...

int	GetReferenceCount ()
	Return the current reference count of this object. More...

void	SetReferenceCount (int)
	Sets the reference count. More...

bool	GetIsInMemkind () const
	A local state flag that remembers whether this object lives in the normal or extended memory space. More...

virtual void	PrintHeader (ostream &os, vtkIndent indent)
	Methods invoked by print to print information about the object including superclasses. More...

virtual void	PrintTrailer (ostream &os, vtkIndent indent)
	Methods invoked by print to print information about the object including superclasses. More...

Protected Member Functions
	vtkPolyDataEdgeConnectivityFilter ()

	~vtkPolyDataEdgeConnectivityFilter () override

int	RequestData (vtkInformation , vtkInformationVector , vtkInformationVector ) override
	This is called by the superclass. More...

int	FillInputPortInformation (int, vtkInformation *) override
	Fill the input port information objects for this algorithm. More...

void	TraverseAndMark ()

void	GetConnectedNeighbors (vtkIdType cellId, vtkIdType npts, const vtkIdType pts, vtkIdList neis)

int	IsScalarConnected (vtkIdType cellId, vtkIdType neiId)

bool	IsBarrierEdge (vtkIdType p0, vtkIdType p1)

double	ComputeRegionAreas ()

void	ExchangeRegions (vtkIdType currentRegionId, vtkIdType neiId, vtkIdType neiRegId)

void	GrowLargeRegions ()

void	GrowSmallRegions ()

int	AssimilateCell (vtkIdType cellId, vtkIdType npts, const vtkIdType *pts)

void	SortRegionsByArea ()

vtkIdType	FindNumberOfExtractedRegions ()

Protected Member Functions inherited from vtkPolyDataAlgorithm
virtual vtkObjectBase *	NewInstanceInternal () const

	vtkPolyDataAlgorithm ()

	~vtkPolyDataAlgorithm () override

virtual int	RequestInformation (vtkInformation request, vtkInformationVector inputVector, vtkInformationVector outputVector)

virtual int	RequestData (vtkInformation request, vtkInformationVector inputVector, vtkInformationVector outputVector)
	This is called by the superclass. More...

virtual int	RequestUpdateExtent (vtkInformation , vtkInformationVector , vtkInformationVector )
	This is called by the superclass. More...

int	FillOutputPortInformation (int port, vtkInformation *info) override
	Fill the output port information objects for this algorithm. More...

int	FillInputPortInformation (int port, vtkInformation *info) override
	Fill the input port information objects for this algorithm. More...

Protected Member Functions inherited from vtkAlgorithm
virtual vtkObjectBase *	NewInstanceInternal () const

	vtkAlgorithm ()

	~vtkAlgorithm () override

virtual int	FillInputPortInformation (int port, vtkInformation *info)
	Fill the input port information objects for this algorithm. More...

virtual int	FillOutputPortInformation (int port, vtkInformation *info)
	Fill the output port information objects for this algorithm. More...

virtual void	SetNumberOfInputPorts (int n)
	Set the number of input ports used by the algorithm. More...

virtual void	SetNumberOfOutputPorts (int n)
	Set the number of output ports provided by the algorithm. More...

int	InputPortIndexInRange (int index, const char *action)

int	OutputPortIndexInRange (int index, const char *action)

int	GetInputArrayAssociation (int idx, vtkInformationVector **inputVector)
	Get the assocition of the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkInformation *	GetInputArrayFieldInformation (int idx, vtkInformationVector **inputVector)
	This method takes in an index (as specified in SetInputArrayToProcess) and a pipeline information vector. More...

virtual vtkExecutive *	CreateDefaultExecutive ()
	Create a default executive. More...

void	ReportReferences (vtkGarbageCollector *) override

virtual void	SetNthInputConnection (int port, int index, vtkAlgorithmOutput *input)
	Replace the Nth connection on the given input port. More...

virtual void	SetNumberOfInputConnections (int port, int n)
	Set the number of input connections on the given input port. More...

void	SetInputDataInternal (int port, vtkDataObject *input)
	These methods are used by subclasses to implement methods to set data objects directly as input. More...

void	AddInputDataInternal (int port, vtkDataObject *input)

int	GetInputArrayAssociation (int idx, int connection, vtkInformationVector **inputVector)
	Filters that have multiple connections on one port can use this signature. More...

int	GetInputArrayAssociation (int idx, vtkDataObject *input)
	Filters that have multiple connections on one port can use this signature. More...

vtkDataArray *	GetInputArrayToProcess (int idx, vtkInformationVector **inputVector)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkDataArray *	GetInputArrayToProcess (int idx, vtkInformationVector **inputVector, int &association)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkDataArray *	GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector)
	Filters that have multiple connections on one port can use this signature. More...

vtkDataArray *	GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association)
	Filters that have multiple connections on one port can use this signature. More...

vtkDataArray *	GetInputArrayToProcess (int idx, vtkDataObject *input)
	Filters that have multiple connections on one port can use this signature. More...

vtkDataArray *	GetInputArrayToProcess (int idx, vtkDataObject *input, int &association)
	Filters that have multiple connections on one port can use this signature. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector, int &association)
	Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector)
	Filters that have multiple connections on one port can use this signature. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association)
	Filters that have multiple connections on one port can use this signature. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkDataObject *input)
	Filters that have multiple connections on one port can use this signature. More...

vtkAbstractArray *	GetInputAbstractArrayToProcess (int idx, vtkDataObject *input, int &association)
	Filters that have multiple connections on one port can use this signature. More...

virtual void	SetErrorCode (unsigned long)
	The error code contains a possible error that occurred while reading or writing the file. More...

Protected Member Functions inherited from vtkObject
	vtkObject ()

	~vtkObject () override

void	RegisterInternal (vtkObjectBase *, vtkTypeBool check) override

void	UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override

void	InternalGrabFocus (vtkCommand mouseEvents, vtkCommand keypressEvents=nullptr)
	These methods allow a command to exclusively grab all events. More...

void	InternalReleaseFocus ()
	These methods allow a command to exclusively grab all events. More...

Protected Member Functions inherited from vtkObjectBase
	vtkObjectBase ()

virtual	~vtkObjectBase ()

virtual void	RegisterInternal (vtkObjectBase *, vtkTypeBool check)

virtual void	UnRegisterInternal (vtkObjectBase *, vtkTypeBool check)

virtual void	ReportReferences (vtkGarbageCollector *)

	vtkObjectBase (const vtkObjectBase &)

void	operator= (const vtkObjectBase &)

Protected Attributes
vtkTypeBool	ColorRegions

vtkTypeBool	CellRegionAreas

int	ExtractionMode

vtkTypeBool	BarrierEdges

double	BarrierEdgeLength [2]

vtkTypeBool	ScalarConnectivity

double	ScalarRange [2]

std::vector< vtkIdType >	Seeds

std::vector< vtkIdType >	SpecifiedRegionIds

vtkSmartPointer< vtkIdTypeArray >	RegionSizes

double	ClosestPoint [3]

int	OutputPointsPrecision

int	RegionGrowing

double	LargeRegionThreshold

int	CurrentGrowPass

double	TotalArea

std::vector< double >	CellAreas

std::vector< double >	RegionAreas

std::vector< char >	RegionClassification

std::vector< vtkIdType >	RegionIds

std::vector< vtkIdType >	PointMap

vtkIdType	NumberOfRegions

vtkIdType	NumberOfExtractedRegions

vtkIdType	NumberOfPoints

vtkIdType	NumCellsInRegion

vtkSmartPointer< vtkDataArray >	InScalars

vtkSmartPointer< vtkPolyData >	Mesh

vtkSmartPointer< vtkEdgeTable >	Barriers

std::vector< vtkIdType >	Wave

std::vector< vtkIdType >	Wave2

vtkSmartPointer< vtkIdList >	PointIds

vtkSmartPointer< vtkIdList >	CellIds

vtkSmartPointer< vtkIdList >	CellNeighbors

vtkSmartPointer< vtkIdList >	CellEdgeNeighbors

double	BRange2 [2]

Protected Attributes inherited from vtkAlgorithm
vtkInformation *	Information

double	Progress

char *	ProgressText

vtkProgressObserver *	ProgressObserver

unsigned long	ErrorCode
	The error code contains a possible error that occurred while reading or writing the file. More...

Protected Attributes inherited from vtkObject
bool	Debug

vtkTimeStamp	MTime

vtkSubjectHelper *	SubjectHelper

Protected Attributes inherited from vtkObjectBase
std::atomic< int32_t >	ReferenceCount

vtkWeakPointerBase **	WeakPointers

typedef vtkPolyDataAlgorithm	Superclass
	Standard methods to instantiate, get type information, and print the object. More...

static vtkPolyDataEdgeConnectivityFilter *	New ()
	Standard methods to instantiate, get type information, and print the object. More...

static vtkTypeBool	IsTypeOf (const char *type)
	Standard methods to instantiate, get type information, and print the object. More...

static vtkPolyDataEdgeConnectivityFilter *	SafeDownCast (vtkObjectBase *o)
	Standard methods to instantiate, get type information, and print the object. More...

virtual vtkTypeBool	IsA (const char *type)
	Standard methods to instantiate, get type information, and print the object. More...

vtkPolyDataEdgeConnectivityFilter *	NewInstance () const
	Standard methods to instantiate, get type information, and print the object. More...

void	PrintSelf (ostream &os, vtkIndent indent) override
	Standard methods to instantiate, get type information, and print the object. More...

virtual vtkObjectBase *	NewInstanceInternal () const
	Standard methods to instantiate, get type information, and print the object. More...

Additional Inherited Members
Static Public Member Functions inherited from vtkPolyDataAlgorithm
static vtkPolyDataAlgorithm *	New ()

static vtkTypeBool	IsTypeOf (const char *type)

static vtkPolyDataAlgorithm *	SafeDownCast (vtkObjectBase *o)

Static Public Member Functions inherited from vtkAlgorithm
static vtkAlgorithm *	New ()

static vtkTypeBool	IsTypeOf (const char *type)

static vtkAlgorithm *	SafeDownCast (vtkObjectBase *o)

static vtkInformationIntegerKey *	INPUT_IS_OPTIONAL ()
	Keys used to specify input port requirements. More...

static vtkInformationIntegerKey *	INPUT_IS_REPEATABLE ()

static vtkInformationInformationVectorKey *	INPUT_REQUIRED_FIELDS ()

static vtkInformationStringVectorKey *	INPUT_REQUIRED_DATA_TYPE ()

static vtkInformationInformationVectorKey *	INPUT_ARRAYS_TO_PROCESS ()

static vtkInformationIntegerKey *	INPUT_PORT ()

static vtkInformationIntegerKey *	INPUT_CONNECTION ()

static vtkInformationIntegerKey *	CAN_PRODUCE_SUB_EXTENT ()
	This key tells the executive that a particular output port is capable of producing an arbitrary subextent of the whole extent. More...

static vtkInformationIntegerKey *	CAN_HANDLE_PIECE_REQUEST ()
	Key that tells the pipeline that a particular algorithm can or cannot handle piece request. More...

static void	SetDefaultExecutivePrototype (vtkExecutive *proto)
	If the DefaultExecutivePrototype is set, a copy of it is created in CreateDefaultExecutive() using NewInstance(). More...

Static Public Member Functions inherited from vtkObject
static vtkObject *	New ()
	Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...

static void	BreakOnError ()
	This method is called when vtkErrorMacro executes. More...

static void	SetGlobalWarningDisplay (int val)
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static void	GlobalWarningDisplayOn ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static void	GlobalWarningDisplayOff ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static int	GetGlobalWarningDisplay ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

Static Public Member Functions inherited from vtkObjectBase
static vtkTypeBool	IsTypeOf (const char *name)
	Return 1 if this class type is the same type of (or a subclass of) the named class. More...

static vtkIdType	GetNumberOfGenerationsFromBaseType (const char *name)
	Given a the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More...

static vtkObjectBase *	New ()
	Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...

static void	SetMemkindDirectory (const char *directoryname)
	The name of a directory, ideally mounted -o dax, to memory map an extended memory space within. More...

static bool	GetUsingMemkind ()
	A global state flag that controls whether vtkObjects are constructed in the usual way (the default) or within the extended memory space. More...

Public Attributes inherited from vtkAlgorithm
vtkTypeBool	AbortExecute

Static Protected Member Functions inherited from vtkAlgorithm
static vtkInformationIntegerKey *	PORT_REQUIREMENTS_FILLED ()

Static Protected Member Functions inherited from vtkObjectBase
static vtkMallocingFunction	GetCurrentMallocFunction ()

static vtkReallocingFunction	GetCurrentReallocFunction ()

static vtkFreeingFunction	GetCurrentFreeFunction ()

static vtkFreeingFunction	GetAlternateFreeFunction ()

Static Protected Attributes inherited from vtkAlgorithm
static vtkExecutive *	DefaultExecutivePrototype

Detailed Description

segment polygonal mesh based on shared edge connectivity

vtkPolyDataEdgeConnectivityFilter is a filter to segment cells that share common edges (i.e., are edge connected), given certain conditions on edge connectivity. These conditions are 1) the shared edge is not a barrier edge, and 2) the edge neighbor satisfies conditions on scalar values. Specification of both #1 and #2 are optional; in which case all polygons in a region that share edges are connected. Barrier edges are either defined by providing an optional second polydata input (which contains a list of lines defining the barrier edges), or a condition on edge length. The conditions on edge length specify whether edges within a range of edge lengths are considered barrier edges. All connected polygonal cells satisfying these conditions form a region. Typically the filter segments multiple regions; however the user can specify which region(s) are to be extracted and output.

The filter works in one of seven ways: 1) extract the largest (in terms of total surface area) edge-connected region in the dataset; 2) extract specified regions; 3) extract all regions containing user-specified point ids; 4) extract all regions containing user-specified cell ids; 5) extract the region closest to a user-specified point; 6) extract all edge-connected regions (used to color regions, i.e., create segmentation labeling); or 7) extract "large" regions, that is all regions considered large in terms of their surface area relative to the total input polydata surface area.

Barrier edges add a unique twist to the filter. By using them, it is possible to segment out portions of a mesh with very small, very large, or inbetween polygon-sized features.

Due to the nature of edge connectivity, the filter only operates on polygons. Vertices, lines, and triangle strips are ignored (and not passed through to the output). Point and cell attribute data are copied to the output; however, an additional, optional array named "RegionId" may be added to the output cell attribute data by enabling ColorRegions.

Warning: If more than one output region is produced, regions are sorted based on their surface area. Thus region# 0 is the largest, followed by the next largest and so on.; To be clear: if scalar connectivity is enabled, this filter segments data based on cell attribute data based on edge-connected meshes. The similar vtkPolyDataConnectivityFilter segments based on point attribute data and point-connected meshes.; A second, optional vtkPolyData (the Source) may be specified which contains edges (i.e., vtkPolyData::Lines) that specify barries to edge connectivity. That is, two polygons who share an edge are not connected if the shared edge exists in the Source vtkPolyData. This feature can be used with other filters such as vtkDelaunay2D (and its constraint edges) to create segmented regions.; Note that mesh regions attached at just a point are not considered connected. Thus such point-connected meshes will be segmented into different regions. This differs from vtkPolyDataConnectivityFilter which segments produces point-connected regions.

See also: vtkPolyDataConnectivityFilter vtkConnectivityFilter vtkDelaunay2D

Definition at line 103 of file vtkPolyDataEdgeConnectivityFilter.h.

Member Typedef Documentation

◆ Superclass

typedef vtkPolyDataAlgorithm vtkPolyDataEdgeConnectivityFilter::Superclass

Standard methods to instantiate, get type information, and print the object.

Definition at line 111 of file vtkPolyDataEdgeConnectivityFilter.h.

Member Enumeration Documentation

◆ RegionGrowingType

enum vtkPolyDataEdgeConnectivityFilter::RegionGrowingType

Enumerator
RegionGrowingOff
LargeRegions
SmallRegions

Definition at line 253 of file vtkPolyDataEdgeConnectivityFilter.h.

Constructor & Destructor Documentation

◆ vtkPolyDataEdgeConnectivityFilter()

vtkPolyDataEdgeConnectivityFilter::vtkPolyDataEdgeConnectivityFilter ( )

protected

◆ ~vtkPolyDataEdgeConnectivityFilter()

vtkPolyDataEdgeConnectivityFilter::~vtkPolyDataEdgeConnectivityFilter ( )

overrideprotected

Member Function Documentation

◆ New()

static vtkPolyDataEdgeConnectivityFilter * vtkPolyDataEdgeConnectivityFilter::New ( )

static

Standard methods to instantiate, get type information, and print the object.

◆ IsTypeOf()

static vtkTypeBool vtkPolyDataEdgeConnectivityFilter::IsTypeOf ( const char * type )

static

Standard methods to instantiate, get type information, and print the object.

◆ IsA()

virtual vtkTypeBool vtkPolyDataEdgeConnectivityFilter::IsA ( const char * type )

virtual

Standard methods to instantiate, get type information, and print the object.

Reimplemented from vtkPolyDataAlgorithm.

◆ SafeDownCast()

static vtkPolyDataEdgeConnectivityFilter * vtkPolyDataEdgeConnectivityFilter::SafeDownCast ( vtkObjectBase * o )

static

Standard methods to instantiate, get type information, and print the object.

◆ NewInstanceInternal()

virtual vtkObjectBase * vtkPolyDataEdgeConnectivityFilter::NewInstanceInternal ( ) const

protectedvirtual

Standard methods to instantiate, get type information, and print the object.

Reimplemented from vtkPolyDataAlgorithm.

◆ NewInstance()

vtkPolyDataEdgeConnectivityFilter * vtkPolyDataEdgeConnectivityFilter::NewInstance ( ) const

Standard methods to instantiate, get type information, and print the object.

◆ PrintSelf()

void vtkPolyDataEdgeConnectivityFilter::PrintSelf	(	ostream &	os,
		vtkIndent	indent
	)

overridevirtual

Standard methods to instantiate, get type information, and print the object.

Reimplemented from vtkPolyDataAlgorithm.

◆ SetExtractionMode()

virtual void vtkPolyDataEdgeConnectivityFilter::SetExtractionMode ( int )

virtual

Control the extraction of connected surfaces.

◆ GetExtractionMode()

virtual int vtkPolyDataEdgeConnectivityFilter::GetExtractionMode ( )

virtual

Control the extraction of connected surfaces.

◆ SetExtractionModeToPointSeededRegions()

void vtkPolyDataEdgeConnectivityFilter::SetExtractionModeToPointSeededRegions ( )

inline

Control the extraction of connected surfaces.

Definition at line 122 of file vtkPolyDataEdgeConnectivityFilter.h.

◆ SetExtractionModeToCellSeededRegions()

void vtkPolyDataEdgeConnectivityFilter::SetExtractionModeToCellSeededRegions ( )

inline

Control the extraction of connected surfaces.

Definition at line 126 of file vtkPolyDataEdgeConnectivityFilter.h.

◆ SetExtractionModeToLargestRegion()

void vtkPolyDataEdgeConnectivityFilter::SetExtractionModeToLargestRegion ( )

inline

Control the extraction of connected surfaces.

Definition at line 130 of file vtkPolyDataEdgeConnectivityFilter.h.

◆ SetExtractionModeToSpecifiedRegions()

void vtkPolyDataEdgeConnectivityFilter::SetExtractionModeToSpecifiedRegions ( )

inline

Control the extraction of connected surfaces.

Definition at line 131 of file vtkPolyDataEdgeConnectivityFilter.h.

◆ SetExtractionModeToClosestPointRegion()

void vtkPolyDataEdgeConnectivityFilter::SetExtractionModeToClosestPointRegion ( )

inline

Control the extraction of connected surfaces.

Definition at line 135 of file vtkPolyDataEdgeConnectivityFilter.h.

◆ SetExtractionModeToLargeRegions()

void vtkPolyDataEdgeConnectivityFilter::SetExtractionModeToLargeRegions ( )

inline

Control the extraction of connected surfaces.

Definition at line 139 of file vtkPolyDataEdgeConnectivityFilter.h.

◆ SetExtractionModeToAllRegions()

void vtkPolyDataEdgeConnectivityFilter::SetExtractionModeToAllRegions ( )

inline

Control the extraction of connected surfaces.

Definition at line 140 of file vtkPolyDataEdgeConnectivityFilter.h.

◆ GetExtractionModeAsString()

const char * vtkPolyDataEdgeConnectivityFilter::GetExtractionModeAsString ( )

inline

Return the method of extraction as a string.

Definition at line 413 of file vtkPolyDataEdgeConnectivityFilter.h.

◆ SetBarrierEdges()

virtual void vtkPolyDataEdgeConnectivityFilter::SetBarrierEdges ( vtkTypeBool )

virtual

Control connectivity traversal based on barrier edges.

If enabled, then either the length of edges, or a explicit specification of barrier edges, is used to control what are considered connected edge neighbors.

◆ GetBarrierEdges()

virtual vtkTypeBool vtkPolyDataEdgeConnectivityFilter::GetBarrierEdges ( )

virtual

Control connectivity traversal based on barrier edges.

If enabled, then either the length of edges, or a explicit specification of barrier edges, is used to control what are considered connected edge neighbors.

◆ BarrierEdgesOn()

virtual void vtkPolyDataEdgeConnectivityFilter::BarrierEdgesOn ( )

virtual

Control connectivity traversal based on barrier edges.

If enabled, then either the length of edges, or a explicit specification of barrier edges, is used to control what are considered connected edge neighbors.

◆ BarrierEdgesOff()

virtual void vtkPolyDataEdgeConnectivityFilter::BarrierEdgesOff ( )

virtual

Control connectivity traversal based on barrier edges.

If enabled, then either the length of edges, or a explicit specification of barrier edges, is used to control what are considered connected edge neighbors.

◆ SetSourceData()

void vtkPolyDataEdgeConnectivityFilter::SetSourceData ( vtkPolyData * )

Specify the source vtkPolyData object used to specify barrier edges (this is an optional connection.) If specified, the connected traversal cannot traverse across the edges indicated as they are defined as barrier edges.

Also note that the data member BarrierEdges must be enabled.

◆ SetSourceConnection()

void vtkPolyDataEdgeConnectivityFilter::SetSourceConnection ( vtkAlgorithmOutput * algOutput )

Specify the source vtkPolyData object used to specify barrier edges (this is an optional connection.) If specified, the connected traversal cannot traverse across the edges indicated as they are defined as barrier edges.

Also note that the data member BarrierEdges must be enabled.

◆ GetSource()

vtkPolyData * vtkPolyDataEdgeConnectivityFilter::GetSource ( )

Specify the source vtkPolyData object used to specify barrier edges (this is an optional connection.) If specified, the connected traversal cannot traverse across the edges indicated as they are defined as barrier edges.

Also note that the data member BarrierEdges must be enabled.

◆ SetBarrierEdgeLength() [1/2]

virtual void vtkPolyDataEdgeConnectivityFilter::SetBarrierEdgeLength	(	double	,
		double
	)

virtual

Edges E of length edgeLen (BarrierEdgeLength[0]<=edgeLen<=BarrierEdgeLength[1]) define barrier edges.

If edgeLen falls within this range, then polygon cells on either side of the edge E are not neighbors, since the edge is a barrier edge. Note that a range of [VTK_DOUBLE_MAX,VTK_DOUBLE_MAX] (which is the default range) implies that all edges are not barrier edges (based on edge length).

◆ SetBarrierEdgeLength() [2/2]

void vtkPolyDataEdgeConnectivityFilter::SetBarrierEdgeLength ( double [2] )

Edges E of length edgeLen (BarrierEdgeLength[0]<=edgeLen<=BarrierEdgeLength[1]) define barrier edges.

If edgeLen falls within this range, then polygon cells on either side of the edge E are not neighbors, since the edge is a barrier edge. Note that a range of [VTK_DOUBLE_MAX,VTK_DOUBLE_MAX] (which is the default range) implies that all edges are not barrier edges (based on edge length).

◆ GetBarrierEdgeLength() [1/3]

virtual double * vtkPolyDataEdgeConnectivityFilter::GetBarrierEdgeLength ( )

virtual

Edges E of length edgeLen (BarrierEdgeLength[0]<=edgeLen<=BarrierEdgeLength[1]) define barrier edges.

If edgeLen falls within this range, then polygon cells on either side of the edge E are not neighbors, since the edge is a barrier edge. Note that a range of [VTK_DOUBLE_MAX,VTK_DOUBLE_MAX] (which is the default range) implies that all edges are not barrier edges (based on edge length).

◆ GetBarrierEdgeLength() [2/3]

virtual void vtkPolyDataEdgeConnectivityFilter::GetBarrierEdgeLength	(	double &	,
		double &
	)

virtual

Edges E of length edgeLen (BarrierEdgeLength[0]<=edgeLen<=BarrierEdgeLength[1]) define barrier edges.

If edgeLen falls within this range, then polygon cells on either side of the edge E are not neighbors, since the edge is a barrier edge. Note that a range of [VTK_DOUBLE_MAX,VTK_DOUBLE_MAX] (which is the default range) implies that all edges are not barrier edges (based on edge length).

◆ GetBarrierEdgeLength() [3/3]

virtual void vtkPolyDataEdgeConnectivityFilter::GetBarrierEdgeLength ( double [2] )

virtual

Edges E of length edgeLen (BarrierEdgeLength[0]<=edgeLen<=BarrierEdgeLength[1]) define barrier edges.

If edgeLen falls within this range, then polygon cells on either side of the edge E are not neighbors, since the edge is a barrier edge. Note that a range of [VTK_DOUBLE_MAX,VTK_DOUBLE_MAX] (which is the default range) implies that all edges are not barrier edges (based on edge length).

◆ SetScalarConnectivity()

virtual void vtkPolyDataEdgeConnectivityFilter::SetScalarConnectivity ( vtkTypeBool )

virtual

Turn on/off connectivity based on scalar value.

If on, cells are connected only if they share a non-barrier edge AND and cell's scalar value falls within the scalar range specified.

◆ GetScalarConnectivity()

virtual vtkTypeBool vtkPolyDataEdgeConnectivityFilter::GetScalarConnectivity ( )

virtual

Turn on/off connectivity based on scalar value.

If on, cells are connected only if they share a non-barrier edge AND and cell's scalar value falls within the scalar range specified.

◆ ScalarConnectivityOn()

virtual void vtkPolyDataEdgeConnectivityFilter::ScalarConnectivityOn ( )

virtual

Turn on/off connectivity based on scalar value.

If on, cells are connected only if they share a non-barrier edge AND and cell's scalar value falls within the scalar range specified.

◆ ScalarConnectivityOff()

virtual void vtkPolyDataEdgeConnectivityFilter::ScalarConnectivityOff ( )

virtual

Turn on/off connectivity based on scalar value.

If on, cells are connected only if they share a non-barrier edge AND and cell's scalar value falls within the scalar range specified.

◆ SetScalarRange() [1/2]

virtual void vtkPolyDataEdgeConnectivityFilter::SetScalarRange	(	double	,
		double
	)

virtual

Set the scalar range to extract cells based on scalar connectivity.

◆ SetScalarRange() [2/2]

void vtkPolyDataEdgeConnectivityFilter::SetScalarRange ( double [2] )

Set the scalar range to extract cells based on scalar connectivity.

◆ GetScalarRange() [1/3]

virtual double * vtkPolyDataEdgeConnectivityFilter::GetScalarRange ( )

virtual

Set the scalar range to extract cells based on scalar connectivity.

◆ GetScalarRange() [2/3]

virtual void vtkPolyDataEdgeConnectivityFilter::GetScalarRange	(	double &	,
		double &
	)

virtual

Set the scalar range to extract cells based on scalar connectivity.

◆ GetScalarRange() [3/3]

virtual void vtkPolyDataEdgeConnectivityFilter::GetScalarRange ( double [2] )

virtual

Set the scalar range to extract cells based on scalar connectivity.

◆ GetRegionSizes()

virtual vtkIdTypeArray * vtkPolyDataEdgeConnectivityFilter::GetRegionSizes ( )

virtual

Obtain the array containing the region sizes of the extracted regions.

◆ InitializeSeedList()

void vtkPolyDataEdgeConnectivityFilter::InitializeSeedList ( )

Initialize list of point ids/cell ids used to seed regions.

◆ AddSeed()

void vtkPolyDataEdgeConnectivityFilter::AddSeed ( int id )

Add a seed id (point or cell id).

Note: ids are 0-offset.

◆ DeleteSeed()

void vtkPolyDataEdgeConnectivityFilter::DeleteSeed ( int id )

Delete a seed id (point or cell id).

Note: ids are 0-offset.

◆ InitializeSpecifiedRegionList()

void vtkPolyDataEdgeConnectivityFilter::InitializeSpecifiedRegionList ( )

Initialize list of region ids to extract.

◆ AddSpecifiedRegion()

void vtkPolyDataEdgeConnectivityFilter::AddSpecifiedRegion ( int id )

Add a region id to extract.

Note: ids are 0-offset.

◆ DeleteSpecifiedRegion()

void vtkPolyDataEdgeConnectivityFilter::DeleteSpecifiedRegion ( int id )

Delete a region id to extract.

Note: ids are 0-offset.

◆ GetNumberOfSpecifiedRegions()

int vtkPolyDataEdgeConnectivityFilter::GetNumberOfSpecifiedRegions ( )

Get number of specified regions.

◆ SetClosestPoint() [1/2]

virtual void vtkPolyDataEdgeConnectivityFilter::SetClosestPoint	(	double	,
		double	,
		double
	)

virtual

Use to specify x-y-z point coordinates when extracting the region closest to a specified point.

◆ SetClosestPoint() [2/2]

virtual void vtkPolyDataEdgeConnectivityFilter::SetClosestPoint ( double [3] )

virtual

Use to specify x-y-z point coordinates when extracting the region closest to a specified point.

◆ GetClosestPoint() [1/2]

virtual double * vtkPolyDataEdgeConnectivityFilter::GetClosestPoint ( )

virtual

Use to specify x-y-z point coordinates when extracting the region closest to a specified point.

◆ GetClosestPoint() [2/2]

virtual void vtkPolyDataEdgeConnectivityFilter::GetClosestPoint ( double data[3] )

virtual

Use to specify x-y-z point coordinates when extracting the region closest to a specified point.