|
| virtual vtkTypeBool | IsA (const char *type) |
| | Return 1 if this class is the same type of (or a subclass of) the named class. More...
|
| |
| vtkPParticleTracer * | NewInstance () const |
| |
| void | PrintSelf (ostream &os, vtkIndent indent) override |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
 Public Member Functions inherited from vtkPParticleTracerBase |
| virtual vtkTypeBool | IsA (const char *type) |
| | Return 1 if this class is the same type of (or a subclass of) the named class. More...
|
| |
| vtkPParticleTracerBase * | NewInstance () const |
| |
| void | PrintSelf (ostream &os, vtkIndent indent) override |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
| virtual void | SetController (vtkMultiProcessController *controller) |
| | Set/Get the controller used when sending particles between processes The controller must be an instance of vtkMPIController. More...
|
| |
| virtual vtkMultiProcessController * | GetController () |
| | Set/Get the controller used when sending particles between processes The controller must be an instance of vtkMPIController. More...
|
| |
| Public Member Functions inherited from vtkParticleTracerBase |
| virtual vtkTypeBool | IsA (const char *type) |
| | Return 1 if this class is the same type of (or a subclass of) the named class. More...
|
| |
| vtkParticleTracerBase * | NewInstance () const |
| |
| void | PrintSelf (ostream &os, vtkIndent indent) override |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
| void | PrintParticleHistories () |
| |
| void | SetIntegrator (vtkInitialValueProblemSolver *) |
| |
| virtual vtkInitialValueProblemSolver * | GetIntegrator () |
| |
| void | SetIntegratorType (int type) |
| |
| int | GetIntegratorType () |
| |
| virtual bool | GetComputeVorticity () |
| | Turn on/off vorticity computation at streamline points (necessary for generating proper stream-ribbons using the vtkRibbonFilter. More...
|
| |
| void | SetComputeVorticity (bool) |
| | Turn on/off vorticity computation at streamline points (necessary for generating proper stream-ribbons using the vtkRibbonFilter. More...
|
| |
| virtual double | GetTerminalSpeed () |
| | Specify the terminal speed value, below which integration is terminated. More...
|
| |
| void | SetTerminalSpeed (double) |
| | Specify the terminal speed value, below which integration is terminated. More...
|
| |
| virtual double | GetRotationScale () |
| | This can be used to scale the rate with which the streamribbons twist. More...
|
| |
| void | SetRotationScale (double) |
| | This can be used to scale the rate with which the streamribbons twist. More...
|
| |
| virtual void | SetIgnorePipelineTime (vtkTypeBool) |
| | To get around problems with the Paraview Animation controls we can just animate the time step and ignore the TIME_ requests. More...
|
| |
| virtual vtkTypeBool | GetIgnorePipelineTime () |
| | To get around problems with the Paraview Animation controls we can just animate the time step and ignore the TIME_ requests. More...
|
| |
| virtual void | IgnorePipelineTimeOn () |
| | To get around problems with the Paraview Animation controls we can just animate the time step and ignore the TIME_ requests. More...
|
| |
| virtual void | IgnorePipelineTimeOff () |
| | To get around problems with the Paraview Animation controls we can just animate the time step and ignore the TIME_ requests. More...
|
| |
| virtual int | GetForceReinjectionEveryNSteps () |
| | When animating particles, it is nice to inject new ones every Nth step to produce a continuous flow. More...
|
| |
| void | SetForceReinjectionEveryNSteps (int) |
| | When animating particles, it is nice to inject new ones every Nth step to produce a continuous flow. More...
|
| |
| void | SetTerminationTime (double t) |
| | Setting TerminationTime to a positive value will cause particles to terminate when the time is reached. More...
|
| |
| virtual double | GetTerminationTime () |
| | Setting TerminationTime to a positive value will cause particles to terminate when the time is reached. More...
|
| |
| virtual double | GetStartTime () |
| | Set the time value for particle tracing to begin. More...
|
| |
| void | SetStartTime (double t) |
| | Set the time value for particle tracing to begin. More...
|
| |
| virtual void | SetStaticSeeds (int) |
| | if StaticSeeds is set and the mesh is static, then every time particles are injected we can re-use the same injection information. More...
|
| |
| virtual int | GetStaticSeeds () |
| | if StaticSeeds is set and the mesh is static, then every time particles are injected we can re-use the same injection information. More...
|
| |
| virtual void | SetStaticMesh (int) |
| | if StaticMesh is set, many optimizations for cell caching can be assumed. More...
|
| |
| virtual int | GetStaticMesh () |
| | if StaticMesh is set, many optimizations for cell caching can be assumed. More...
|
| |
| virtual void | SetParticleWriter (vtkAbstractParticleWriter *pw) |
| | Set/Get the Writer associated with this Particle Tracer Ideally a parallel IO capable vtkH5PartWriter should be used which will collect particles from all parallel processes and write them to a single HDF5 file. More...
|
| |
| virtual vtkAbstractParticleWriter * | GetParticleWriter () |
| | Set/Get the Writer associated with this Particle Tracer Ideally a parallel IO capable vtkH5PartWriter should be used which will collect particles from all parallel processes and write them to a single HDF5 file. More...
|
| |
| | vtkSetFilePathMacro (ParticleFileName) |
| | Set/Get the filename to be used with the particle writer when dumping particles to disk. More...
|
| |
| | vtkGetFilePathMacro (ParticleFileName) |
| | Set/Get the filename to be used with the particle writer when dumping particles to disk. More...
|
| |
| virtual void | SetEnableParticleWriting (vtkTypeBool) |
| | Set/Get the filename to be used with the particle writer when dumping particles to disk. More...
|
| |
| virtual vtkTypeBool | GetEnableParticleWriting () |
| | Set/Get the filename to be used with the particle writer when dumping particles to disk. More...
|
| |
| virtual void | EnableParticleWritingOn () |
| | Set/Get the filename to be used with the particle writer when dumping particles to disk. More...
|
| |
| virtual void | EnableParticleWritingOff () |
| | Set/Get the filename to be used with the particle writer when dumping particles to disk. More...
|
| |
| virtual void | SetDisableResetCache (vtkTypeBool) |
| | Set/Get the flag to disable cache This is off by default and turned on in special circumstances such as in a coprocessing workflow. More...
|
| |
| virtual vtkTypeBool | GetDisableResetCache () |
| | Set/Get the flag to disable cache This is off by default and turned on in special circumstances such as in a coprocessing workflow. More...
|
| |
| virtual void | DisableResetCacheOn () |
| | Set/Get the flag to disable cache This is off by default and turned on in special circumstances such as in a coprocessing workflow. More...
|
| |
| virtual void | DisableResetCacheOff () |
| | Set/Get the flag to disable cache This is off by default and turned on in special circumstances such as in a coprocessing workflow. More...
|
| |
| void | AddSourceConnection (vtkAlgorithmOutput *input) |
| | Provide support for multiple seed sources. More...
|
| |
| void | RemoveAllSources () |
| | Provide support for multiple seed sources. More...
|
| |
| virtual vtkTypeBool | IsA (const char *type) |
| | Return 1 if this class is the same type of (or a subclass of) the named class. More...
|
| |
| vtkPolyDataAlgorithm * | NewInstance () const |
| |
| void | PrintSelf (ostream &os, vtkIndent indent) override |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
| vtkTypeBool | ProcessRequest (vtkInformation *, vtkInformationVector **, vtkInformationVector *) override |
| | see vtkAlgorithm for details More...
|
| |
| vtkDataObject * | GetInput () |
| |
| vtkDataObject * | GetInput (int port) |
| |
| vtkPolyData * | GetPolyDataInput (int port) |
| |
| vtkPolyData * | GetOutput () |
| | Get the output data object for a port on this algorithm. More...
|
| |
| vtkPolyData * | GetOutput (int) |
| | Get the output data object for a port on this algorithm. More...
|
| |
| virtual void | SetOutput (vtkDataObject *d) |
| | Get the output data object for a port on this algorithm. More...
|
| |
| void | SetInputData (vtkDataObject *) |
| | Assign a data object as input. More...
|
| |
| void | SetInputData (int, vtkDataObject *) |
| | Assign a data object as input. More...
|
| |
| void | AddInputData (vtkDataObject *) |
| | Assign a data object as input. More...
|
| |
| void | AddInputData (int, vtkDataObject *) |
| | Assign a data object as input. More...
|
| |
| virtual vtkTypeBool | IsA (const char *type) |
| | Return 1 if this class is the same type of (or a subclass of) the named class. More...
|
| |
| vtkAlgorithm * | NewInstance () const |
| |
| void | PrintSelf (ostream &os, vtkIndent indent) override |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
| int | HasExecutive () |
| | Check whether this algorithm has an assigned executive. More...
|
| |
| vtkExecutive * | GetExecutive () |
| | Get this algorithm's executive. More...
|
| |
| virtual void | SetExecutive (vtkExecutive *executive) |
| | Set this algorithm's executive. More...
|
| |
| virtual vtkTypeBool | ProcessRequest (vtkInformation *request, vtkInformationVector **inInfo, vtkInformationVector *outInfo) |
| | Upstream/Downstream requests form the generalized interface through which executives invoke a algorithm's functionality. More...
|
| |
| vtkTypeBool | ProcessRequest (vtkInformation *request, vtkCollection *inInfo, vtkInformationVector *outInfo) |
| | Version of ProcessRequest() that is wrapped. More...
|
| |
| virtual int | ComputePipelineMTime (vtkInformation *request, vtkInformationVector **inInfoVec, vtkInformationVector *outInfoVec, int requestFromOutputPort, vtkMTimeType *mtime) |
| | A special version of ProcessRequest meant specifically for the pipeline modified time request. More...
|
| |
| virtual int | ModifyRequest (vtkInformation *request, int when) |
| | This method gives the algorithm a chance to modify the contents of a request before or after (specified in the when argument) it is forwarded. More...
|
| |
| vtkInformation * | GetInputPortInformation (int port) |
| | Get the information object associated with an input port. More...
|
| |
| vtkInformation * | GetOutputPortInformation (int port) |
| | Get the information object associated with an output port. More...
|
| |
| int | GetNumberOfInputPorts () |
| | Get the number of input ports used by the algorithm. More...
|
| |
| int | GetNumberOfOutputPorts () |
| | Get the number of output ports provided by the algorithm. More...
|
| |
| void | SetProgress (double) |
| | SetProgress is deprecated. More...
|
| |
| void | UpdateProgress (double amount) |
| | Update the progress of the process object. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, const char *fieldAssociation, const char *attributeTypeorName) |
| | String based versions of SetInputArrayToProcess(). More...
|
| |
| vtkInformation * | GetInputArrayInformation (int idx) |
| | Get the info object for the specified input array to this algorithm. More...
|
| |
| void | RemoveAllInputs () |
| | Remove all the input data. More...
|
| |
| vtkDataObject * | GetOutputDataObject (int port) |
| | Get the data object that will contain the algorithm output for the given port. More...
|
| |
| vtkDataObject * | GetInputDataObject (int port, int connection) |
| | Get the data object that will contain the algorithm input for the given port and given connection. More...
|
| |
| virtual void | RemoveInputConnection (int port, vtkAlgorithmOutput *input) |
| | Remove a connection from the given input port index. More...
|
| |
| virtual void | RemoveInputConnection (int port, int idx) |
| | Remove a connection given by index idx. More...
|
| |
| virtual void | RemoveAllInputConnections (int port) |
| | Removes all input connections. More...
|
| |
| virtual void | SetInputDataObject (int port, vtkDataObject *data) |
| | Sets the data-object as an input on the given port index. More...
|
| |
| virtual void | SetInputDataObject (vtkDataObject *data) |
| |
| virtual void | AddInputDataObject (int port, vtkDataObject *data) |
| | Add the data-object as an input to this given port. More...
|
| |
| virtual void | AddInputDataObject (vtkDataObject *data) |
| |
| vtkAlgorithmOutput * | GetOutputPort (int index) |
| | Get a proxy object corresponding to the given output port of this algorithm. More...
|
| |
| vtkAlgorithmOutput * | GetOutputPort () |
| |
| int | GetNumberOfInputConnections (int port) |
| | Get the number of inputs currently connected to a port. More...
|
| |
| int | GetTotalNumberOfInputConnections () |
| | Get the total number of inputs for this algorithm. More...
|
| |
| vtkAlgorithmOutput * | GetInputConnection (int port, int index) |
| | Get the algorithm output port connected to an input port. More...
|
| |
| vtkAlgorithm * | GetInputAlgorithm (int port, int index, int &algPort) |
| | Returns the algorithm and the output port index of that algorithm connected to a port-index pair. More...
|
| |
| vtkAlgorithm * | GetInputAlgorithm (int port, int index) |
| | Returns the algorithm connected to a port-index pair. More...
|
| |
| vtkAlgorithm * | GetInputAlgorithm () |
| | Equivalent to GetInputAlgorithm(0, 0). More...
|
| |
| vtkExecutive * | GetInputExecutive (int port, int index) |
| | Returns the executive associated with a particular input connection. More...
|
| |
| vtkExecutive * | GetInputExecutive () |
| | Equivalent to GetInputExecutive(0, 0) More...
|
| |
| vtkInformation * | GetInputInformation (int port, int index) |
| | Return the information object that is associated with a particular input connection. More...
|
| |
| vtkInformation * | GetInputInformation () |
| | Equivalent to GetInputInformation(0, 0) More...
|
| |
| vtkInformation * | GetOutputInformation (int port) |
| | Return the information object that is associated with a particular output port. More...
|
| |
| virtual vtkTypeBool | Update (int port, vtkInformationVector *requests) |
| | This method enables the passing of data requests to the algorithm to be used during execution (in addition to bringing a particular port up-to-date). More...
|
| |
| virtual vtkTypeBool | Update (vtkInformation *requests) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual int | UpdatePiece (int piece, int numPieces, int ghostLevels, const int extents[6]=nullptr) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual int | UpdateExtent (const int extents[6]) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual int | UpdateTimeStep (double time, int piece=-1, int numPieces=1, int ghostLevels=0, const int extents[6]=nullptr) |
| | Convenience method to update an algorithm after passing requests to its first output port. More...
|
| |
| virtual void | UpdateInformation () |
| | Bring the algorithm's information up-to-date. More...
|
| |
| virtual void | UpdateDataObject () |
| | Create output object(s). More...
|
| |
| virtual void | PropagateUpdateExtent () |
| | Propagate meta-data upstream. More...
|
| |
| virtual void | UpdateWholeExtent () |
| | Bring this algorithm's outputs up-to-date. More...
|
| |
| void | ConvertTotalInputToPortConnection (int ind, int &port, int &conn) |
| | Convenience routine to convert from a linear ordering of input connections to a port/connection pair. More...
|
| |
| virtual vtkInformation * | GetInformation () |
| | Set/Get the information object associated with this algorithm. More...
|
| |
| virtual void | SetInformation (vtkInformation *) |
| | Set/Get the information object associated with this algorithm. More...
|
| |
| void | Register (vtkObjectBase *o) override |
| | Participate in garbage collection. More...
|
| |
| void | UnRegister (vtkObjectBase *o) override |
| | Participate in garbage collection. More...
|
| |
| virtual void | SetAbortExecute (vtkTypeBool) |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual vtkTypeBool | GetAbortExecute () |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual void | AbortExecuteOn () |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual void | AbortExecuteOff () |
| | Set/Get the AbortExecute flag for the process object. More...
|
| |
| virtual double | GetProgress () |
| | Get the execution progress of a process object. More...
|
| |
| void | SetProgressShiftScale (double shift, double scale) |
| | Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called. More...
|
| |
| virtual double | GetProgressShift () |
| | Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called. More...
|
| |
| virtual double | GetProgressScale () |
| | Specify the shift and scale values to use to apply to the progress amount when UpdateProgress is called. More...
|
| |
| void | SetProgressText (const char *ptext) |
| | Set the current text message associated with the progress state. More...
|
| |
| virtual char * | GetProgressText () |
| | Set the current text message associated with the progress state. More...
|
| |
| virtual unsigned long | GetErrorCode () |
| | The error code contains a possible error that occurred while reading or writing the file. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, const char *name) |
| | Set the input data arrays that this algorithm will process. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, int port, int connection, int fieldAssociation, int fieldAttributeType) |
| | Set the input data arrays that this algorithm will process. More...
|
| |
| virtual void | SetInputArrayToProcess (int idx, vtkInformation *info) |
| | Set the input data arrays that this algorithm will process. More...
|
| |
| virtual void | SetInputConnection (int port, vtkAlgorithmOutput *input) |
| | Set the connection for the given input port index. More...
|
| |
| virtual void | SetInputConnection (vtkAlgorithmOutput *input) |
| | Set the connection for the given input port index. More...
|
| |
| virtual void | AddInputConnection (int port, vtkAlgorithmOutput *input) |
| | Add a connection to the given input port index. More...
|
| |
| virtual void | AddInputConnection (vtkAlgorithmOutput *input) |
| | Add a connection to the given input port index. More...
|
| |
| virtual void | Update (int port) |
| | Bring this algorithm's outputs up-to-date. More...
|
| |
| virtual void | Update () |
| | Bring this algorithm's outputs up-to-date. More...
|
| |
| virtual void | SetReleaseDataFlag (int) |
| | Turn release data flag on or off for all output ports. More...
|
| |
| virtual int | GetReleaseDataFlag () |
| | Turn release data flag on or off for all output ports. More...
|
| |
| void | ReleaseDataFlagOn () |
| | Turn release data flag on or off for all output ports. More...
|
| |
| void | ReleaseDataFlagOff () |
| | Turn release data flag on or off for all output ports. More...
|
| |
| int | UpdateExtentIsEmpty (vtkInformation *pinfo, vtkDataObject *output) |
| | This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...
|
| |
| int | UpdateExtentIsEmpty (vtkInformation *pinfo, int extentType) |
| | This detects when the UpdateExtent will generate no data This condition is satisfied when the UpdateExtent has zero volume (0,-1,...) or the UpdateNumberOfPieces is 0. More...
|
| |
| int * | GetUpdateExtent () |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| int * | GetUpdateExtent (int port) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int &x0, int &x1, int &y0, int &y1, int &z0, int &z1) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int port, int &x0, int &x1, int &y0, int &y1, int &z0, int &z1) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int extent[6]) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| void | GetUpdateExtent (int port, int extent[6]) |
| | These functions return the update extent for output ports that use 3D extents. More...
|
| |
| int | GetUpdatePiece () |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdatePiece (int port) |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateNumberOfPieces () |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateNumberOfPieces (int port) |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateGhostLevel () |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| int | GetUpdateGhostLevel (int port) |
| | These functions return the update extent for output ports that use piece extents. More...
|
| |
| void | SetProgressObserver (vtkProgressObserver *) |
| | If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...
|
| |
| virtual vtkProgressObserver * | GetProgressObserver () |
| | If an ProgressObserver is set, the algorithm will report progress through it rather than directly. More...
|
| |
| | vtkBaseTypeMacro (vtkObject, vtkObjectBase) |
| |
| virtual void | DebugOn () |
| | Turn debugging output on. More...
|
| |
| virtual void | DebugOff () |
| | Turn debugging output off. More...
|
| |
| bool | GetDebug () |
| | Get the value of the debug flag. More...
|
| |
| void | SetDebug (bool debugFlag) |
| | Set the value of the debug flag. More...
|
| |
| virtual void | Modified () |
| | Update the modification time for this object. More...
|
| |
| virtual vtkMTimeType | GetMTime () |
| | Return this object's modified time. More...
|
| |
| void | PrintSelf (ostream &os, vtkIndent indent) override |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
| void | RemoveObserver (unsigned long tag) |
| |
| void | RemoveObservers (unsigned long event) |
| |
| void | RemoveObservers (const char *event) |
| |
| void | RemoveAllObservers () |
| |
| vtkTypeBool | HasObserver (unsigned long event) |
| |
| vtkTypeBool | HasObserver (const char *event) |
| |
| int | InvokeEvent (unsigned long event) |
| |
| int | InvokeEvent (const char *event) |
| |
| unsigned long | AddObserver (unsigned long event, vtkCommand *, float priority=0.0f) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| unsigned long | AddObserver (const char *event, vtkCommand *, float priority=0.0f) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| vtkCommand * | GetCommand (unsigned long tag) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| void | RemoveObserver (vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| void | RemoveObservers (unsigned long event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| void | RemoveObservers (const char *event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| vtkTypeBool | HasObserver (unsigned long event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| vtkTypeBool | HasObserver (const char *event, vtkCommand *) |
| | Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f) |
| | Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
| | Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...
|
| |
| template<class U , class T > |
| unsigned long | AddObserver (unsigned long event, U observer, bool(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
| | Allow user to set the AbortFlagOn() with the return value of the callback method. More...
|
| |
| int | InvokeEvent (unsigned long event, void *callData) |
| | This method invokes an event and return whether the event was aborted or not. More...
|
| |
| int | InvokeEvent (const char *event, void *callData) |
| | This method invokes an event and return whether the event was aborted or not. More...
|
| |
| const char * | GetClassName () const |
| | Return the class name as a string. More...
|
| |
| virtual vtkTypeBool | IsA (const char *name) |
| | Return 1 if this class is the same type of (or a subclass of) the named class. More...
|
| |
| virtual vtkIdType | GetNumberOfGenerationsFromBase (const char *name) |
| | Given the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More...
|
| |
| virtual void | Delete () |
| | Delete a VTK object. More...
|
| |
| virtual void | FastDelete () |
| | Delete a reference to this object. More...
|
| |
| void | InitializeObjectBase () |
| |
| void | Print (ostream &os) |
| | Print an object to an ostream. More...
|
| |
| virtual void | Register (vtkObjectBase *o) |
| | Increase the reference count (mark as used by another object). More...
|
| |
| virtual void | UnRegister (vtkObjectBase *o) |
| | Decrease the reference count (release by another object). More...
|
| |
| int | GetReferenceCount () |
| | Return the current reference count of this object. More...
|
| |
| void | SetReferenceCount (int) |
| | Sets the reference count. More...
|
| |
| bool | GetIsInMemkind () const |
| | A local state flag that remembers whether this object lives in the normal or extended memory space. More...
|
| |
| virtual void | PrintHeader (ostream &os, vtkIndent indent) |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
| virtual void | PrintTrailer (ostream &os, vtkIndent indent) |
| | Methods invoked by print to print information about the object including superclasses. More...
|
| |
|
| virtual vtkObjectBase * | NewInstanceInternal () const |
| |
| | vtkPParticleTracer () |
| |
| | ~vtkPParticleTracer () |
| |
| int | OutputParticles (vtkPolyData *poly) override |
| |
| Protected Member Functions inherited from vtkPParticleTracerBase |
| virtual vtkObjectBase * | NewInstanceInternal () const |
| |
| | vtkPParticleTracerBase () |
| |
| | ~vtkPParticleTracerBase () |
| |
| virtual int | RequestUpdateExtent (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) override |
| | This is called by the superclass. More...
|
| |
| vtkPolyData * | Execute (vtkInformationVector **inputVector) override |
| |
| bool | SendParticleToAnotherProcess (vtkParticleTracerBaseNamespace::ParticleInformation &info, vtkParticleTracerBaseNamespace::ParticleInformation &previous, vtkPointData *) override |
| |
| void | AssignSeedsToProcessors (double time, vtkDataSet *source, int sourceID, int ptId, vtkParticleTracerBaseNamespace::ParticleVector &localSeedPoints, int &localAssignedCount) override |
| | Before starting the particle trace, classify all the injection/seed points according to which processor they belong to. More...
|
| |
| void | AssignUniqueIds (vtkParticleTracerBaseNamespace::ParticleVector &localSeedPoints) override |
| | give each one a unique ID. More...
|
| |
| bool | SendReceiveParticles (RemoteParticleVector &outofdomain, RemoteParticleVector &received) |
| | this is used during classification of seed points and also between iterations of the main loop as particles leave each processor domain. More...
|
| |
| bool | UpdateParticleListFromOtherProcesses () override |
| | this is used during classification of seed points and also between iterations of the main loop as particles leave each processor domain. More...
|
| |
| bool | IsPointDataValid (vtkDataObject *input) override |
| | Method that checks that the input arrays are ordered the same on all data sets. More...
|
| |
| Protected Member Functions inherited from vtkParticleTracerBase |
| virtual vtkObjectBase * | NewInstanceInternal () const |
| |
| | vtkParticleTracerBase () |
| |
| | ~vtkParticleTracerBase () override |
| |
| int | FillInputPortInformation (int port, vtkInformation *info) override |
| | Fill the input port information objects for this algorithm. More...
|
| |
| vtkTypeBool | ProcessRequest (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) override |
| | see vtkAlgorithm for details More...
|
| |
| int | RequestInformation (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) override |
| |
| int | RequestUpdateExtent (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) override |
| | This is called by the superclass. More...
|
| |
| int | RequestData (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) override |
| | This is called by the superclass. More...
|
| |
| virtual int | ProcessInput (vtkInformationVector **inputVector) |
| |
| virtual vtkPolyData * | Execute (vtkInformationVector **inputVector) |
| |
| virtual void | Initialize () |
| |
| virtual int | OutputParticles (vtkPolyData *poly)=0 |
| |
| virtual void | Finalize () |
| |
| virtual std::vector< vtkDataSet * > | GetSeedSources (vtkInformationVector *inputVector, int timeStep) |
| | Method to get the data set seed sources. More...
|
| |
| int | InitializeInterpolator () |
| |
| int | UpdateDataCache (vtkDataObject *td) |
| |
| void | TestParticles (vtkParticleTracerBaseNamespace::ParticleVector &candidates, vtkParticleTracerBaseNamespace::ParticleVector &passed, int &count) |
| | inside our data. More...
|
| |
| void | TestParticles (vtkParticleTracerBaseNamespace::ParticleVector &candidates, std::vector< int > &passed) |
| |
| virtual void | AssignSeedsToProcessors (double time, vtkDataSet *source, int sourceID, int ptId, vtkParticleTracerBaseNamespace::ParticleVector &localSeedPoints, int &localAssignedCount) |
| | all the injection/seed points according to which processor they belong to. More...
|
| |
| virtual void | AssignUniqueIds (vtkParticleTracerBaseNamespace::ParticleVector &localSeedPoints) |
| | give each one a unique ID. More...
|
| |
| void | UpdateParticleList (vtkParticleTracerBaseNamespace::ParticleVector &candidates) |
| | and sending between processors, into a list, which is used as the master list on this processor More...
|
| |
| virtual bool | UpdateParticleListFromOtherProcesses () |
| | this is used during classification of seed points and also between iterations of the main loop as particles leave each processor domain. More...
|
| |
| void | IntegrateParticle (vtkParticleTracerBaseNamespace::ParticleListIterator &it, double currenttime, double terminationtime, vtkInitialValueProblemSolver *integrator) |
| | particle between the two times supplied. More...
|
| |
| virtual bool | SendParticleToAnotherProcess (vtkParticleTracerBaseNamespace::ParticleInformation &, vtkParticleTracerBaseNamespace::ParticleInformation &, vtkPointData *) |
| |
| bool | ComputeDomainExitLocation (double pos[4], double p2[4], double intersection[4], vtkGenericCell *cell) |
| | This is an old routine kept for possible future use. More...
|
| |
| void | CreateProtoPD (vtkDataObject *input) |
| |
| vtkFloatArray * | GetParticleAge (vtkPointData *) |
| |
| vtkIntArray * | GetParticleIds (vtkPointData *) |
| |
| vtkSignedCharArray * | GetParticleSourceIds (vtkPointData *) |
| |
| vtkIntArray * | GetInjectedPointIds (vtkPointData *) |
| |
| vtkIntArray * | GetInjectedStepIds (vtkPointData *) |
| |
| vtkIntArray * | GetErrorCodeArr (vtkPointData *) |
| |
| vtkFloatArray * | GetParticleVorticity (vtkPointData *) |
| |
| vtkFloatArray * | GetParticleRotation (vtkPointData *) |
| |
| vtkFloatArray * | GetParticleAngularVel (vtkPointData *) |
| |
| bool | InsideBounds (double point[]) |
| |
| void | CalculateVorticity (vtkGenericCell *cell, double pcoords[3], vtkDoubleArray *cellVectors, double vorticity[3]) |
| |
| double | GetCacheDataTime (int i) |
| |
| double | GetCacheDataTime () |
| |
| virtual void | ResetCache () |
| |
| void | AddParticle (vtkParticleTracerBaseNamespace::ParticleInformation &info, double *velocity) |
| |
| virtual int | GetReinjectionCounter () |
| |
| virtual double | GetCurrentTimeValue () |
| |
| virtual void | InitializeExtraPointDataArrays (vtkPointData *vtkNotUsed(outputPD)) |
| | Methods to append values to existing point data arrays that may only be desired on specific concrete derived classes. More...
|
| |
| virtual void | AppendToExtraPointDataArrays (vtkParticleTracerBaseNamespace::ParticleInformation &) |
| |
| vtkTemporalInterpolatedVelocityField * | GetInterpolator () |
| |
| virtual void | AddRestartSeeds (vtkInformationVector **) |
| | For restarts of particle paths, we add in the ability to add in particles from a previous computation that we will still advect. More...
|
| |
| bool | IsPointDataValid (vtkCompositeDataSet *input, std::vector< std::string > &arrayNames) |
| | Methods that check that the input arrays are ordered the same on all data sets. More...
|
| |
| void | GetPointDataArrayNames (vtkDataSet *input, std::vector< std::string > &names) |
| | Methods that check that the input arrays are ordered the same on all data sets. More...
|
| |
| virtual vtkObjectBase * | NewInstanceInternal () const |
| |
| | vtkPolyDataAlgorithm () |
| |
| | ~vtkPolyDataAlgorithm () override |
| |
| virtual int | RequestInformation (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) |
| |
| virtual int | RequestData (vtkInformation *request, vtkInformationVector **inputVector, vtkInformationVector *outputVector) |
| | This is called by the superclass. More...
|
| |
| virtual int | RequestUpdateExtent (vtkInformation *, vtkInformationVector **, vtkInformationVector *) |
| | This is called by the superclass. More...
|
| |
| int | FillOutputPortInformation (int port, vtkInformation *info) override |
| | Fill the output port information objects for this algorithm. More...
|
| |
| int | FillInputPortInformation (int port, vtkInformation *info) override |
| | Fill the input port information objects for this algorithm. More...
|
| |
| virtual vtkObjectBase * | NewInstanceInternal () const |
| |
| | vtkAlgorithm () |
| |
| | ~vtkAlgorithm () override |
| |
| virtual int | FillInputPortInformation (int port, vtkInformation *info) |
| | Fill the input port information objects for this algorithm. More...
|
| |
| virtual int | FillOutputPortInformation (int port, vtkInformation *info) |
| | Fill the output port information objects for this algorithm. More...
|
| |
| virtual void | SetNumberOfInputPorts (int n) |
| | Set the number of input ports used by the algorithm. More...
|
| |
| virtual void | SetNumberOfOutputPorts (int n) |
| | Set the number of output ports provided by the algorithm. More...
|
| |
| int | InputPortIndexInRange (int index, const char *action) |
| |
| int | OutputPortIndexInRange (int index, const char *action) |
| |
| int | GetInputArrayAssociation (int idx, vtkInformationVector **inputVector) |
| | Get the assocition of the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkInformation * | GetInputArrayFieldInformation (int idx, vtkInformationVector **inputVector) |
| | This method takes in an index (as specified in SetInputArrayToProcess) and a pipeline information vector. More...
|
| |
| virtual vtkExecutive * | CreateDefaultExecutive () |
| | Create a default executive. More...
|
| |
| void | ReportReferences (vtkGarbageCollector *) override |
| |
| virtual void | SetNthInputConnection (int port, int index, vtkAlgorithmOutput *input) |
| | Replace the Nth connection on the given input port. More...
|
| |
| virtual void | SetNumberOfInputConnections (int port, int n) |
| | Set the number of input connections on the given input port. More...
|
| |
| void | SetInputDataInternal (int port, vtkDataObject *input) |
| | These methods are used by subclasses to implement methods to set data objects directly as input. More...
|
| |
| void | AddInputDataInternal (int port, vtkDataObject *input) |
| |
| int | GetInputArrayAssociation (int idx, int connection, vtkInformationVector **inputVector) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| int | GetInputArrayAssociation (int idx, vtkDataObject *input) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkInformationVector **inputVector) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkInformationVector **inputVector, int &association) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkDataObject *input) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkDataArray * | GetInputArrayToProcess (int idx, vtkDataObject *input, int &association) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkInformationVector **inputVector, int &association) |
| | Get the actual data array for the input array specified by idx, this is only reasonable during the REQUEST_DATA pass. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, int connection, vtkInformationVector **inputVector, int &association) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkDataObject *input) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| vtkAbstractArray * | GetInputAbstractArrayToProcess (int idx, vtkDataObject *input, int &association) |
| | Filters that have multiple connections on one port can use this signature. More...
|
| |
| virtual void | SetErrorCode (unsigned long) |
| | The error code contains a possible error that occurred while reading or writing the file. More...
|
| |
| | vtkObject () |
| |
| | ~vtkObject () override |
| |
| void | RegisterInternal (vtkObjectBase *, vtkTypeBool check) override |
| |
| void | UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override |
| |
| void | InternalGrabFocus (vtkCommand *mouseEvents, vtkCommand *keypressEvents=nullptr) |
| | These methods allow a command to exclusively grab all events. More...
|
| |
| void | InternalReleaseFocus () |
| | These methods allow a command to exclusively grab all events. More...
|
| |
| | vtkObjectBase () |
| |
| virtual | ~vtkObjectBase () |
| |
| virtual void | RegisterInternal (vtkObjectBase *, vtkTypeBool check) |
| |
| virtual void | UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) |
| |
| virtual void | ReportReferences (vtkGarbageCollector *) |
| |
| | vtkObjectBase (const vtkObjectBase &) |
| |
| void | operator= (const vtkObjectBase &) |
| |
1.9.4