defines cell interface More...

#include <vtkGenericAdaptorCell.h>

Inheritance diagram for vtkGenericAdaptorCell:

Collaboration diagram for vtkGenericAdaptorCell:

Public Types
typedef vtkObject	Superclass

Public Member Functions
virtual vtkTypeBool	IsA (const char *type)
	Return 1 if this class is the same type of (or a subclass of) the named class. More...

vtkGenericAdaptorCell *	NewInstance () const

void	PrintSelf (ostream &os, vtkIndent indent) override
	Methods invoked by print to print information about the object including superclasses. More...

virtual vtkIdType	GetId ()=0
	Unique identification number of the cell over the whole data set. More...

virtual int	IsInDataSet ()=0
	Does ‘this’ a cell of a dataset? (otherwise, it is a boundary cell) More...

virtual int	GetType ()=0
	Return the type of the current cell. More...

virtual int	GetDimension ()=0
	Return the topological dimension of the current cell. More...

virtual int	GetGeometryOrder ()=0
	Return the interpolation order of the geometry. More...

int	IsGeometryLinear ()
	Does the cell have a non-linear interpolation for the geometry? More...

virtual int	GetAttributeOrder (vtkGenericAttribute *a)=0
	Return the interpolation order of attribute ‘a’ on the cell (may differ by cell). More...

virtual int	GetHighestOrderAttribute (vtkGenericAttributeCollection *ac)
	Return the index of the first point centered attribute with the highest order in ‘ac’. More...

vtkTypeBool	IsAttributeLinear (vtkGenericAttribute *a)
	Does the attribute ‘a’ have a non-linear interpolation? More...

virtual int	IsPrimary ()=0
	Is the cell primary (i.e. More...

virtual int	GetNumberOfPoints ()=0
	Return the number of corner points that compose the cell. More...

virtual int	GetNumberOfBoundaries (int dim=-1)=0
	Return the number of boundaries of dimension ‘dim’ (or all dimensions greater than 0 and less than GetDimension() if -1) of the cell. More...

virtual int	GetNumberOfDOFNodes ()=0
	Accumulated number of DOF nodes of the current cell. More...

virtual void	GetPointIterator (vtkGenericPointIterator *it)=0
	Return the points of cell into ‘it’. More...

virtual vtkGenericCellIterator *	NewCellIterator ()=0
	Create an empty cell iterator. More...

virtual void	GetBoundaryIterator (vtkGenericCellIterator *boundaries, int dim=-1)=0
	Return the ‘boundaries’ cells of dimension ‘dim’ (or all dimensions less than GetDimension() if -1) that are part of the boundary of the cell. More...

virtual void	GetNeighbors (vtkGenericAdaptorCell boundary, vtkGenericCellIterator neighbors)=0
	Put into ‘neighbors’ the cells (dimension>boundary->GetDimension()) of the dataset that share the boundary ‘boundary’ with this cell. More...

virtual int	FindClosestBoundary (int subId, double pcoords[3], vtkGenericCellIterator *&boundary)=0
	Compute the closest boundary of the current sub-cell ‘subId’ for point ‘pcoord’ (in parametric coordinates) in ‘boundary’, and return whether the point is inside the cell or not. More...

virtual int	EvaluatePosition (const double x[3], double *closestPoint, int &subId, double pcoords[3], double &dist2)=0
	Is ‘x’ inside the current cell? It also evaluates parametric coordinates ‘pcoords’, sub-cell id ‘subId’ (0 means primary cell), distance squared to the sub-cell in ‘dist2’ and closest corner point ‘closestPoint’. More...

virtual void	EvaluateLocation (int subId, double pcoords[3], double x[3])=0
	Determine the global coordinates ‘x’ from sub-cell ‘subId’ and parametric coordinates ‘pcoords’ in the cell. More...

virtual void	InterpolateTuple (vtkGenericAttribute a, double pcoords[3], double val)=0
	Interpolate the attribute ‘a’ at local position ‘pcoords’ of the cell into ‘val’. More...

virtual void	InterpolateTuple (vtkGenericAttributeCollection c, double pcoords[3], double val)=0
	Interpolate the whole collection of attributes ‘c’ at local position ‘pcoords’ of the cell into ‘val’. More...

virtual void	Contour (vtkContourValues values, vtkImplicitFunction f, vtkGenericAttributeCollection attributes, vtkGenericCellTessellator tess, vtkIncrementalPointLocator locator, vtkCellArray verts, vtkCellArray lines, vtkCellArray polys, vtkPointData outPd, vtkCellData outCd, vtkPointData internalPd, vtkPointData secondaryPd, vtkCellData *secondaryCd)
	Generate a contour (contouring primitives) for each ‘values’ or with respect to an implicit function ‘f’. More...

virtual void	Clip (double value, vtkImplicitFunction f, vtkGenericAttributeCollection attributes, vtkGenericCellTessellator tess, int insideOut, vtkIncrementalPointLocator locator, vtkCellArray connectivity, vtkPointData outPd, vtkCellData outCd, vtkPointData internalPd, vtkPointData secondaryPd, vtkCellData secondaryCd)
	Cut (or clip) the current cell with respect to the contour defined by the ‘value’ or the implicit function ‘f’ of the scalar attribute (‘attributes->GetActiveAttribute()’,‘attributes->GetActiveComponent()’). More...

virtual int	IntersectWithLine (double p1[3], double p2[3], double tol, double &t, double x[3], double pcoords[3], int &subId)=0
	Is there an intersection between the current cell and the ray (‘p1’,‘p2’) according to a tolerance ‘tol’? If true, ‘x’ is the global intersection, ‘t’ is the parametric coordinate for the line, ‘pcoords’ are the parametric coordinates for cell. More...

virtual void	Derivatives (int subId, double pcoords[3], vtkGenericAttribute attribute, double derivs)=0
	Compute derivatives ‘derivs’ of the attribute ‘attribute’ (from its values at the corner points of the cell) given sub-cell ‘subId’ (0 means primary cell) and parametric coordinates ‘pcoords’. More...

virtual void	GetBounds (double bounds[6])=0
	Compute the bounding box of the current cell in ‘bounds’ in global coordinates. More...

virtual double *	GetBounds ()
	Return the bounding box of the current cell in global coordinates. More...

virtual double	GetLength2 ()
	Return the bounding box diagonal squared of the current cell. More...

virtual int	GetParametricCenter (double pcoords[3])=0
	Get the center of the current cell (in parametric coordinates) and place it in ‘pcoords’. More...

virtual double	GetParametricDistance (const double pcoords[3])=0
	Return the distance of the parametric coordinate ‘pcoords’ to the current cell. More...

virtual double *	GetParametricCoords ()=0
	Return a contiguous array of parametric coordinates of the corrner points defining the current cell. More...

virtual void	Tessellate (vtkGenericAttributeCollection attributes, vtkGenericCellTessellator tess, vtkPoints points, vtkIncrementalPointLocator locator, vtkCellArray cellArray, vtkPointData internalPd, vtkPointData pd, vtkCellData cd, vtkUnsignedCharArray *types)
	Tessellate the cell if it is not linear or if at least one attribute of ‘attributes’ is not linear. More...

virtual int	IsFaceOnBoundary (vtkIdType faceId)=0
	Is the face ‘faceId’ of the current cell on the exterior boundary of the dataset? More...

virtual int	IsOnBoundary ()=0
	Is the cell on the exterior boundary of the dataset? More...

virtual void	GetPointIds (vtkIdType *id)=0
	Put into ‘id’ the list of the dataset points that define the corner points of the cell. More...

virtual void	TriangulateFace (vtkGenericAttributeCollection attributes, vtkGenericCellTessellator tess, int index, vtkPoints points, vtkIncrementalPointLocator locator, vtkCellArray cellArray, vtkPointData internalPd, vtkPointData pd, vtkCellData cd)
	Tessellate face ‘index’ of the cell. More...

virtual const vtkIdType *	GetFaceArray (vtkIdType faceId)=0
	Return the ids of the vertices defining face ‘faceId’. More...

virtual int	GetNumberOfVerticesOnFace (int faceId)=0
	Return the number of vertices defining face ‘faceId’. More...

virtual const vtkIdType *	GetEdgeArray (vtkIdType edgeId)=0
	Return the ids of the vertices defining edge ‘edgeId’. More...


virtual int	CountNeighbors (vtkGenericAdaptorCell *boundary)=0
	Number of cells (dimension>boundary->GetDimension()) of the dataset that share the boundary ‘boundary’ of ‘this’. More...

virtual void	CountEdgeNeighbors (int *sharing)=0
	Number of cells (dimension>boundary->GetDimension()) of the dataset that share the boundary ‘boundary’ of ‘this’. More...

Public Member Functions inherited from vtkObject
	vtkBaseTypeMacro (vtkObject, vtkObjectBase)

virtual void	DebugOn ()
	Turn debugging output on. More...

virtual void	DebugOff ()
	Turn debugging output off. More...

bool	GetDebug ()
	Get the value of the debug flag. More...

void	SetDebug (bool debugFlag)
	Set the value of the debug flag. More...

virtual void	Modified ()
	Update the modification time for this object. More...

virtual vtkMTimeType	GetMTime ()
	Return this object's modified time. More...

void	PrintSelf (ostream &os, vtkIndent indent) override
	Methods invoked by print to print information about the object including superclasses. More...

void	RemoveObserver (unsigned long tag)

void	RemoveObservers (unsigned long event)

void	RemoveObservers (const char *event)

void	RemoveAllObservers ()

vtkTypeBool	HasObserver (unsigned long event)

vtkTypeBool	HasObserver (const char *event)

int	InvokeEvent (unsigned long event)

int	InvokeEvent (const char *event)

unsigned long	AddObserver (unsigned long event, vtkCommand *, float priority=0.0f)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

unsigned long	AddObserver (const char event, vtkCommand , float priority=0.0f)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkCommand *	GetCommand (unsigned long tag)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObserver (vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObservers (unsigned long event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObservers (const char event, vtkCommand )
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkTypeBool	HasObserver (unsigned long event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkTypeBool	HasObserver (const char event, vtkCommand )
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f)
	Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, void(T::callback)(vtkObject , unsigned long, void *), float priority=0.0f)
	Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, bool(T::callback)(vtkObject , unsigned long, void *), float priority=0.0f)
	Allow user to set the AbortFlagOn() with the return value of the callback method. More...

int	InvokeEvent (unsigned long event, void *callData)
	This method invokes an event and return whether the event was aborted or not. More...

int	InvokeEvent (const char event, void callData)
	This method invokes an event and return whether the event was aborted or not. More...

Public Member Functions inherited from vtkObjectBase
const char *	GetClassName () const
	Return the class name as a string. More...

virtual vtkTypeBool	IsA (const char *name)
	Return 1 if this class is the same type of (or a subclass of) the named class. More...

virtual vtkIdType	GetNumberOfGenerationsFromBase (const char *name)
	Given the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More...

virtual void	Delete ()
	Delete a VTK object. More...

virtual void	FastDelete ()
	Delete a reference to this object. More...

void	InitializeObjectBase ()

void	Print (ostream &os)
	Print an object to an ostream. More...

virtual void	Register (vtkObjectBase *o)
	Increase the reference count (mark as used by another object). More...

virtual void	UnRegister (vtkObjectBase *o)
	Decrease the reference count (release by another object). More...

int	GetReferenceCount ()
	Return the current reference count of this object. More...

void	SetReferenceCount (int)
	Sets the reference count. More...

bool	GetIsInMemkind () const
	A local state flag that remembers whether this object lives in the normal or extended memory space. More...

virtual void	PrintHeader (ostream &os, vtkIndent indent)
	Methods invoked by print to print information about the object including superclasses. More...

virtual void	PrintTrailer (ostream &os, vtkIndent indent)
	Methods invoked by print to print information about the object including superclasses. More...

Static Public Member Functions
static vtkTypeBool	IsTypeOf (const char *type)

static vtkGenericAdaptorCell *	SafeDownCast (vtkObjectBase *o)

Static Public Member Functions inherited from vtkObject
static vtkObject *	New ()
	Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...

static void	BreakOnError ()
	This method is called when vtkErrorMacro executes. More...

static void	SetGlobalWarningDisplay (int val)
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static void	GlobalWarningDisplayOn ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static void	GlobalWarningDisplayOff ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static int	GetGlobalWarningDisplay ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

Static Public Member Functions inherited from vtkObjectBase
static vtkTypeBool	IsTypeOf (const char *name)
	Return 1 if this class type is the same type of (or a subclass of) the named class. More...

static vtkIdType	GetNumberOfGenerationsFromBaseType (const char *name)
	Given a the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More...

static vtkObjectBase *	New ()
	Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...

static void	SetMemkindDirectory (const char *directoryname)
	The name of a directory, ideally mounted -o dax, to memory map an extended memory space within. More...

static bool	GetUsingMemkind ()
	A global state flag that controls whether vtkObjects are constructed in the usual way (the default) or within the extended memory space. More...

Protected Member Functions
virtual vtkObjectBase *	NewInstanceInternal () const

	vtkGenericAdaptorCell ()

	~vtkGenericAdaptorCell () override

void	Reset ()
	Reset internal structures. More...

void	AllocateTuples (int size)
	Allocate some memory if Tuples does not exist or is smaller than size. More...

Protected Member Functions inherited from vtkObject
	vtkObject ()

	~vtkObject () override

void	RegisterInternal (vtkObjectBase *, vtkTypeBool check) override

void	UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override

void	InternalGrabFocus (vtkCommand mouseEvents, vtkCommand keypressEvents=nullptr)
	These methods allow a command to exclusively grab all events. More...

void	InternalReleaseFocus ()
	These methods allow a command to exclusively grab all events. More...

Protected Member Functions inherited from vtkObjectBase
	vtkObjectBase ()

virtual	~vtkObjectBase ()

virtual void	RegisterInternal (vtkObjectBase *, vtkTypeBool check)

virtual void	UnRegisterInternal (vtkObjectBase *, vtkTypeBool check)

virtual void	ReportReferences (vtkGarbageCollector *)

	vtkObjectBase (const vtkObjectBase &)

void	operator= (const vtkObjectBase &)

Protected Attributes
vtkTetra *	Tetra

vtkTriangle *	Triangle

vtkLine *	Line

vtkVertex *	Vertex

vtkQuad *	Quad

vtkHexahedron *	Hexa

vtkWedge *	Wedge

vtkPyramid *	Pyramid

vtkDoubleArray *	InternalPoints

vtkCellArray *	InternalCellArray

vtkDoubleArray *	InternalScalars

vtkDoubleArray *	PointDataScalars

vtkIdList *	InternalIds

vtkDoubleArray *	Scalars

vtkPointData *	PointData

vtkCellData *	CellData

double *	Tuples

int	TuplesCapacity

double	Bounds [6]

Protected Attributes inherited from vtkObject
bool	Debug

vtkTimeStamp	MTime

vtkSubjectHelper *	SubjectHelper

Protected Attributes inherited from vtkObjectBase
std::atomic< int32_t >	ReferenceCount

vtkWeakPointerBase **	WeakPointers

Additional Inherited Members
Static Protected Member Functions inherited from vtkObjectBase
static vtkMallocingFunction	GetCurrentMallocFunction ()

static vtkReallocingFunction	GetCurrentReallocFunction ()

static vtkFreeingFunction	GetCurrentFreeFunction ()

static vtkFreeingFunction	GetAlternateFreeFunction ()

Detailed Description

defines cell interface

In VTK, spatial-temporal data is defined in terms of a dataset which is composed of cells. The cells are topological entities over which an interpolation field is applied. Cells are defined in terms of a topology (e.g., vertices, lines, triangles, polygons, tetrahedra, etc.), points that instantiate the geometry of the cells, and interpolation fields (in the general case one interpolation field is for geometry, the other is for attribute data associated with the cell).

Currently most algorithms in VTK use vtkCell and vtkDataSet, which make assumptions about the nature of datasets, cells, and attributes. In particular, this abstraction assumes that cell interpolation functions are linear, or products of linear functions. Further, VTK implements most of the interpolation functions. This implementation starts breaking down as the complexity of the interpolation (or basis) functions increases.

vtkGenericAdaptorCell addresses these issues by providing more general abstraction for cells. It also adopts modern C++ practices including using iterators. The vtkGenericAdaptorCell is designed to fit within the adaptor framework; meaning that it is meant to adapt VTK to external simulation systems (see the GenericFiltering/README.html).

Please note that most cells are defined in terms of other cells (the boundary cells). They are also defined in terms of points, which are not the same as vertices (vertices are a 0-D cell; points represent a position in space).

Another important concept is the notion of DOFNodes. These concept supports cell types with complex interpolation functions. For example, higher-order p-method finite elements may have different functions on each of their topological features (edges, faces, region). The coefficients of these polynomial functions are associated with DOFNodes. (There is a single DOFNode for each topological feature.) Note that from this perspective, points are used to establish the topological form of the cell; mid-side nodes and such are considered DOFNodes.

See also: vtkGenericDataSet

Definition at line 91 of file vtkGenericAdaptorCell.h.

Member Typedef Documentation

◆ Superclass

typedef vtkObject vtkGenericAdaptorCell::Superclass

Definition at line 94 of file vtkGenericAdaptorCell.h.

Constructor & Destructor Documentation

◆ vtkGenericAdaptorCell()

vtkGenericAdaptorCell::vtkGenericAdaptorCell ( )

protected

◆ ~vtkGenericAdaptorCell()

vtkGenericAdaptorCell::~vtkGenericAdaptorCell ( )

overrideprotected

Member Function Documentation

◆ IsTypeOf()

static vtkTypeBool vtkGenericAdaptorCell::IsTypeOf ( const char * type )

static

◆ IsA()

virtual vtkTypeBool vtkGenericAdaptorCell::IsA ( const char * name )

virtual

Return 1 if this class is the same type of (or a subclass of) the named class.

Returns 0 otherwise. This method works in combination with vtkTypeMacro found in vtkSetGet.h.

Reimplemented from vtkObjectBase.

◆ SafeDownCast()

static vtkGenericAdaptorCell * vtkGenericAdaptorCell::SafeDownCast ( vtkObjectBase * o )

static

◆ NewInstanceInternal()

virtual vtkObjectBase * vtkGenericAdaptorCell::NewInstanceInternal ( ) const

protectedvirtual

◆ NewInstance()

vtkGenericAdaptorCell * vtkGenericAdaptorCell::NewInstance ( ) const

◆ PrintSelf()

void vtkGenericAdaptorCell::PrintSelf	(	ostream &	os,
		vtkIndent	indent
	)

overridevirtual

Methods invoked by print to print information about the object including superclasses.

Typically not called by the user (use Print() instead) but used in the hierarchical print process to combine the output of several classes.

Reimplemented from vtkObject.

◆ GetId()

virtual vtkIdType vtkGenericAdaptorCell::GetId ( )

pure virtual

Unique identification number of the cell over the whole data set.

This unique key may not be contiguous.

◆ IsInDataSet()

virtual int vtkGenericAdaptorCell::IsInDataSet ( )

pure virtual

Does ‘this’ a cell of a dataset? (otherwise, it is a boundary cell)

◆ GetType()

virtual int vtkGenericAdaptorCell::GetType ( )

pure virtual

Return the type of the current cell.

Postcondition: (result==VTK_HIGHER_ORDER_EDGE)|| (result==VTK_HIGHER_ORDER_TRIANGLE)|| (result==VTK_HIGHER_ORDER_TETRAHEDRON)

◆ GetDimension()

virtual int vtkGenericAdaptorCell::GetDimension ( )

pure virtual

Return the topological dimension of the current cell.

Postcondition: valid_result: result>=0 && result<=3

◆ GetGeometryOrder()

virtual int vtkGenericAdaptorCell::GetGeometryOrder ( )

pure virtual

Return the interpolation order of the geometry.

Postcondition: positive_result: result>=0

◆ IsGeometryLinear()

int vtkGenericAdaptorCell::IsGeometryLinear ( )

Does the cell have a non-linear interpolation for the geometry?

Postcondition: definition: result==(GetGeometryOrder()==1)

◆ GetAttributeOrder()

virtual int vtkGenericAdaptorCell::GetAttributeOrder ( vtkGenericAttribute * a )

pure virtual

Return the interpolation order of attribute ‘a’ on the cell (may differ by cell).

Precondition: a_exists: a!=0

Postcondition: positive_result: result>=0

◆ GetHighestOrderAttribute()

virtual int vtkGenericAdaptorCell::GetHighestOrderAttribute ( vtkGenericAttributeCollection * ac )

virtual

Return the index of the first point centered attribute with the highest order in ‘ac’.

Precondition: ac_exists: ac!=0

Postcondition: valid_result: result>=-1 && result<ac->GetNumberOfAttributes()

◆ IsAttributeLinear()

vtkTypeBool vtkGenericAdaptorCell::IsAttributeLinear ( vtkGenericAttribute * a )

Does the attribute ‘a’ have a non-linear interpolation?

Precondition: a_exists: a!=0

Postcondition: definition: result==(GetAttributeOrder()==1)

◆ IsPrimary()

virtual int vtkGenericAdaptorCell::IsPrimary ( )

pure virtual

Is the cell primary (i.e.

not composite) ?

◆ GetNumberOfPoints()

virtual int vtkGenericAdaptorCell::GetNumberOfPoints ( )

pure virtual

Return the number of corner points that compose the cell.

Postcondition: positive_result: result>=0

◆ GetNumberOfBoundaries()

virtual int vtkGenericAdaptorCell::GetNumberOfBoundaries ( int dim = -1 )

pure virtual

Return the number of boundaries of dimension ‘dim’ (or all dimensions greater than 0 and less than GetDimension() if -1) of the cell.

When dim is -1, the number of vertices is not included in the count because vertices are a special case: a vertex will have at most a single field value associated with it; DOF nodes may have an arbitrary number of field values associated with them.

Precondition: valid_dim_range: (dim==-1) || ((dim>=0)&&(dim<GetDimension()))

Postcondition: positive_result: result>=0

◆ GetNumberOfDOFNodes()

virtual int vtkGenericAdaptorCell::GetNumberOfDOFNodes ( )

pure virtual

Accumulated number of DOF nodes of the current cell.

A DOF node is a component of cell with a given topological dimension. e.g.: a triangle has 4 DOF: 1 face and 3 edges. An hexahedron has 19 DOF: 1 region, 6 faces, and 12 edges.

The number of vertices is not included in the count because vertices are a special case: a vertex will have at most a single field value associated with it; DOF nodes may have an arbitrary number of field values associated with them.

Postcondition: valid_result: result==GetNumberOfBoundaries(-1)+1

◆ GetPointIterator()

virtual void vtkGenericAdaptorCell::GetPointIterator ( vtkGenericPointIterator * it )

pure virtual

Return the points of cell into ‘it’.

Precondition: it_exists: it!=0

◆ NewCellIterator()

virtual vtkGenericCellIterator * vtkGenericAdaptorCell::NewCellIterator ( )

pure virtual

Create an empty cell iterator.

The user is responsible for deleting it.

Postcondition: result_exists: result!=0

◆ GetBoundaryIterator()

virtual void vtkGenericAdaptorCell::GetBoundaryIterator	(	vtkGenericCellIterator *	boundaries,
		int	dim = `-1`
	)

pure virtual

Return the ‘boundaries’ cells of dimension ‘dim’ (or all dimensions less than GetDimension() if -1) that are part of the boundary of the cell.

Precondition: valid_dim_range: (dim==-1) || ((dim>=0)&&(dim<GetDimension())); boundaries_exist: boundaries!=0

◆ CountNeighbors()

virtual int vtkGenericAdaptorCell::CountNeighbors ( vtkGenericAdaptorCell * boundary )

pure virtual

Number of cells (dimension>boundary->GetDimension()) of the dataset that share the boundary ‘boundary’ of ‘this’.

‘this’ IS NOT INCLUDED.

Precondition: boundary_exists: boundary!=0; real_boundary: !boundary->IsInDataSet(); cell_of_the_dataset: IsInDataSet(); boundary: HasBoundary(boundary)

Postcondition: positive_result: result>=0

◆ CountEdgeNeighbors()

virtual void vtkGenericAdaptorCell::CountEdgeNeighbors ( int * sharing )

pure virtual

Number of cells (dimension>boundary->GetDimension()) of the dataset that share the boundary ‘boundary’ of ‘this’.

‘this’ IS NOT INCLUDED.

Precondition: boundary_exists: boundary!=0; real_boundary: !boundary->IsInDataSet(); cell_of_the_dataset: IsInDataSet(); boundary: HasBoundary(boundary)

Postcondition: positive_result: result>=0

◆ GetNeighbors()

virtual void vtkGenericAdaptorCell::GetNeighbors	(	vtkGenericAdaptorCell *	boundary,
		vtkGenericCellIterator *	neighbors
	)

pure virtual

Put into ‘neighbors’ the cells (dimension>boundary->GetDimension()) of the dataset that share the boundary ‘boundary’ with this cell.

‘this’ IS NOT INCLUDED.

Precondition: boundary_exists: boundary!=0; real_boundary: !boundary->IsInDataSet(); cell_of_the_dataset: IsInDataSet(); boundary: HasBoundary(boundary); neighbors_exist: neighbors!=0

◆ FindClosestBoundary()

virtual int vtkGenericAdaptorCell::FindClosestBoundary	(	int	subId,
		double	pcoords[3],
		vtkGenericCellIterator *&	boundary
	)

pure virtual

Compute the closest boundary of the current sub-cell ‘subId’ for point ‘pcoord’ (in parametric coordinates) in ‘boundary’, and return whether the point is inside the cell or not.

‘boundary’ is of dimension GetDimension()-1.

Precondition: positive_subId: subId>=0

◆ EvaluatePosition()

virtual int vtkGenericAdaptorCell::EvaluatePosition	(	const double	x[3],
		double *	closestPoint,
		int &	subId,
		double	pcoords[3],
		double &	dist2
	)

pure virtual

Is ‘x’ inside the current cell? It also evaluates parametric coordinates ‘pcoords’, sub-cell id ‘subId’ (0 means primary cell), distance squared to the sub-cell in ‘dist2’ and closest corner point ‘closestPoint’.

‘dist2’ and ‘closestPoint’ are not evaluated if ‘closestPoint’==0. If a numerical error occurred, -1 is returned and all other results should be ignored.

Postcondition: valid_result: result==-1 || result==0 || result==1; positive_distance: result!=-1 implies (closestPoint!=0 implies dist2>=0)

◆ EvaluateLocation()

virtual void vtkGenericAdaptorCell::EvaluateLocation	(	int	subId,
		double	pcoords[3],
		double	x[3]
	)

pure virtual

Determine the global coordinates ‘x’ from sub-cell ‘subId’ and parametric coordinates ‘pcoords’ in the cell.

Precondition: positive_subId: subId>=0; clamped_pcoords: (0<=pcoords[0])&&(pcoords[0]<=1)&&(0<=pcoords[1]) &&(pcoords[1]<=1)&&(0<=pcoords[2])&&(pcoords[2]<=1)

◆ InterpolateTuple() [1/2]

virtual void vtkGenericAdaptorCell::InterpolateTuple	(	vtkGenericAttribute *	a,
		double	pcoords[3],
		double *	val
	)

pure virtual

Interpolate the attribute ‘a’ at local position ‘pcoords’ of the cell into ‘val’.

Precondition: a_exists: a!=0; a_is_point_centered: a->GetCentering()==vtkPointCentered; clamped_point: pcoords[0]>=0 && pcoords[0]<=1 && pcoords[1]>=0 && pcoords[1]<=1 && pcoords[2]>=0 && pcoords[2]<=1; val_exists: val!=0; valid_size: sizeof(val)==a->GetNumberOfComponents()

◆ InterpolateTuple() [2/2]

virtual void vtkGenericAdaptorCell::InterpolateTuple	(	vtkGenericAttributeCollection *	c,
		double	pcoords[3],
		double *	val
	)

pure virtual

Interpolate the whole collection of attributes ‘c’ at local position ‘pcoords’ of the cell into ‘val’.

Only point centered attributes are taken into account.

Precondition: c_exists: c!=0; clamped_point: pcoords[0]>=0 && pcoords[0]<=1 && pcoords[1]>=0 && pcoords[1]<=1 && pcoords[2]>=0 && pcoords[2]<=1; val_exists: val!=0; valid_size: sizeof(val)==c->GetNumberOfPointCenteredComponents()

◆ Contour()

virtual void vtkGenericAdaptorCell::Contour	(	vtkContourValues *	values,
		vtkImplicitFunction *	f,
		vtkGenericAttributeCollection *	attributes,
		vtkGenericCellTessellator *	tess,
		vtkIncrementalPointLocator *	locator,
		vtkCellArray *	verts,
		vtkCellArray *	lines,
		vtkCellArray *	polys,
		vtkPointData *	outPd,
		vtkCellData *	outCd,
		vtkPointData *	internalPd,
		vtkPointData *	secondaryPd,
		vtkCellData *	secondaryCd
	)

virtual

Generate a contour (contouring primitives) for each ‘values’ or with respect to an implicit function ‘f’.

Contouring is performed on the scalar attribute (‘attributes->GetActiveAttribute()’ ‘attributes->GetActiveComponent()’). Contouring interpolates the ‘attributes->GetNumberOfattributesToInterpolate()’ attributes ‘attributes->GetAttributesToInterpolate()’. The ‘locator’, ‘verts’, ‘lines’, ‘polys’, ‘outPd’ and ‘outCd’ are cumulative data arrays over cell iterations: they store the result of each call to Contour():

‘locator’ is a points list that merges points as they are inserted (i.e., prevents duplicates).
‘verts’ is an array of generated vertices
‘lines’ is an array of generated lines
‘polys’ is an array of generated polygons
‘outPd’ is an array of interpolated point data along the edge (if not-nullptr)
‘outCd’ is an array of copied cell data of the current cell (if not-nullptr) ‘internalPd’, ‘secondaryPd’ and ‘secondaryCd’ are initialized by the filter that call it from ‘attributes’.
‘internalPd’ stores the result of the tessellation pass: the higher-order cell is tessellated into linear sub-cells.
‘secondaryPd’ and ‘secondaryCd’ are used internally as inputs to the Contour() method on linear sub-cells. Note: the CopyAllocate() method must be invoked on both ‘outPd’ and ‘outCd’, from ‘secondaryPd’ and ‘secondaryCd’.

NOTE: ‘vtkGenericAttributeCollection *attributes’ will be replaced by a ‘vtkInformation’.

Precondition: values_exist: (values!=0 && f==0) || (values==0 && f!=0); attributes_exist: attributes!=0; tessellator_exists: tess!=0; locator_exists: locator!=0; verts_exist: verts!=0; lines_exist: lines!=0; polys_exist: polys!=0; internalPd_exists: internalPd!=0; secondaryPd_exists: secondaryPd!=0; secondaryCd_exists: secondaryCd!=0

◆ Clip()

virtual void vtkGenericAdaptorCell::Clip	(	double	value,
		vtkImplicitFunction *	f,
		vtkGenericAttributeCollection *	attributes,
		vtkGenericCellTessellator *	tess,
		int	insideOut,
		vtkIncrementalPointLocator *	locator,
		vtkCellArray *	connectivity,
		vtkPointData *	outPd,
		vtkCellData *	outCd,
		vtkPointData *	internalPd,
		vtkPointData *	secondaryPd,
		vtkCellData *	secondaryCd
	)

virtual

Cut (or clip) the current cell with respect to the contour defined by the ‘value’ or the implicit function ‘f’ of the scalar attribute (‘attributes->GetActiveAttribute()’,‘attributes->GetActiveComponent()’).

If ‘f’ exists, ‘value’ is not used. The output is the part of the current cell which is inside the contour. The output is a set of zero, one or more cells of the same topological dimension as the current cell. Normally, cell points whose scalar value is greater than "value" are considered inside. If ‘insideOut’ is on, this is reversed. Clipping interpolates the ‘attributes->GetNumberOfattributesToInterpolate()’ attributes ‘attributes->GetAttributesToInterpolate()’. ‘locator’, ‘connectivity’, ‘outPd’ and ‘outCd’ are cumulative data arrays over cell iterations: they store the result of each call to Clip():

‘locator’ is a points list that merges points as they are inserted (i.e., prevents duplicates).
‘connectivity’ is an array of generated cells
‘outPd’ is an array of interpolated point data along the edge (if not-nullptr)
‘outCd’ is an array of copied cell data of the current cell (if not-nullptr) ‘internalPd’, ‘secondaryPd’ and ‘secondaryCd’ are initialized by the filter that call it from ‘attributes’.
‘internalPd’ stores the result of the tessellation pass: the higher-order cell is tessellated into linear sub-cells.
‘secondaryPd’ and ‘secondaryCd’ are used internally as inputs to the Clip() method on linear sub-cells. Note: the CopyAllocate() method must be invoked on both ‘outPd’ and ‘outCd’, from ‘secondaryPd’ and ‘secondaryCd’.

NOTE: ‘vtkGenericAttributeCollection *attributes’ will be replaced by a ‘vtkInformation’.

Precondition: attributes_exist: attributes!=0; tessellator_exists: tess!=0; locator_exists: locator!=0; connectivity_exists: connectivity!=0; internalPd_exists: internalPd!=0; secondaryPd_exists: secondaryPd!=0; secondaryCd_exists: secondaryCd!=0

◆ IntersectWithLine()

virtual int vtkGenericAdaptorCell::IntersectWithLine	(	double	p1[3],
		double	p2[3],
		double	tol,
		double &	t,
		double	x[3],
		double	pcoords[3],
		int &	subId
	)

pure virtual

Is there an intersection between the current cell and the ray (‘p1’,‘p2’) according to a tolerance ‘tol’? If true, ‘x’ is the global intersection, ‘t’ is the parametric coordinate for the line, ‘pcoords’ are the parametric coordinates for cell.

‘subId’ is the sub-cell where the intersection occurs.

Precondition: positive_tolerance: tol>0

◆ Derivatives()

virtual void vtkGenericAdaptorCell::Derivatives	(	int	subId,
		double	pcoords[3],
		vtkGenericAttribute *	attribute,
		double *	derivs
	)

pure virtual

Compute derivatives ‘derivs’ of the attribute ‘attribute’ (from its values at the corner points of the cell) given sub-cell ‘subId’ (0 means primary cell) and parametric coordinates ‘pcoords’.

Derivatives are in the x-y-z coordinate directions for each data value.

Precondition: positive_subId: subId>=0; clamped_pcoords: (0<=pcoords[0])&&(pcoords[0]<=1)&&(0<=pcoords[1]) &&(pcoords[1]<=1)&&(0<=pcoords[2])%%(pcoords[2]<=1); attribute_exists: attribute!=0; derivs_exists: derivs!=0; valid_size: sizeof(derivs)>=attribute->GetNumberOfComponents()*3

◆ GetBounds() [1/2]

virtual void vtkGenericAdaptorCell::GetBounds ( double bounds[6] )

pure virtual

Compute the bounding box of the current cell in ‘bounds’ in global coordinates.

THREAD SAFE

◆ GetBounds() [2/2]

virtual double * vtkGenericAdaptorCell::GetBounds ( )

virtual

Return the bounding box of the current cell in global coordinates.

NOT THREAD SAFE

Postcondition: result_exists: result!=0; valid_size: sizeof(result)>=6

◆ GetLength2()

virtual double vtkGenericAdaptorCell::GetLength2 ( )

virtual

Return the bounding box diagonal squared of the current cell.

Postcondition: positive_result: result>=0

◆ GetParametricCenter()

virtual int vtkGenericAdaptorCell::GetParametricCenter ( double pcoords[3] )

pure virtual

Get the center of the current cell (in parametric coordinates) and place it in ‘pcoords’.

If the current cell is a composite, the return value is the sub-cell id that the center is in.

Postcondition: valid_result: (result>=0) && (IsPrimary() implies result==0)

◆ GetParametricDistance()

virtual double vtkGenericAdaptorCell::GetParametricDistance ( const double pcoords[3] )

pure virtual

Return the distance of the parametric coordinate ‘pcoords’ to the current cell.

If inside the cell, a distance of zero is returned. This is used during picking to get the correct cell picked. (The tolerance will occasionally allow cells to be picked who are not really intersected "inside" the cell.)

Postcondition: positive_result: result>=0

◆ GetParametricCoords()

virtual double * vtkGenericAdaptorCell::GetParametricCoords ( )

pure virtual

Return a contiguous array of parametric coordinates of the corrner points defining the current cell.

In other words, (px,py,pz, px,py,pz, etc..) The coordinates are ordered consistent with the definition of the point ordering for the cell. Note that 3D parametric coordinates are returned no matter what the topological dimension of the cell.

Postcondition: valid_result_exists: ((IsPrimary()) && (result!=0)) || ((!IsPrimary()) && (result==0)) result!=0 implies sizeof(result)==GetNumberOfPoints()

◆ Tessellate()

virtual void vtkGenericAdaptorCell::Tessellate	(	vtkGenericAttributeCollection *	attributes,
		vtkGenericCellTessellator *	tess,
		vtkPoints *	points,
		vtkIncrementalPointLocator *	locator,
		vtkCellArray *	cellArray,
		vtkPointData *	internalPd,
		vtkPointData *	pd,
		vtkCellData *	cd,
		vtkUnsignedCharArray *	types
	)

virtual

Tessellate the cell if it is not linear or if at least one attribute of ‘attributes’ is not linear.

The output are linear cells of the same dimension than the cell. If the cell is linear and all attributes are linear, the output is just a copy of the current cell. ‘points’, ‘cellArray’, ‘pd’ and ‘cd’ are cumulative output data arrays over cell iterations: they store the result of each call to Tessellate(). ‘internalPd’ is initialized by the calling filter and stores the result of the tessellation. If it is not null, ‘types’ is filled with the types of the linear cells. ‘types’ is null when it is called from vtkGenericGeometryFilter and not null when it is called from vtkGenericDatasetTessellator.

Precondition: attributes_exist: attributes!=0; tessellator_exists: tess!=0; points_exist: points!=0; cellArray_exists: cellArray!=0; internalPd_exists: internalPd!=0; pd_exist: pd!=0; cd_exists: cd!=0

◆ IsFaceOnBoundary()

virtual int vtkGenericAdaptorCell::IsFaceOnBoundary ( vtkIdType faceId )

pure virtual

Is the face ‘faceId’ of the current cell on the exterior boundary of the dataset?

Precondition: 3d: GetDimension()==3

◆ IsOnBoundary()

virtual int vtkGenericAdaptorCell::IsOnBoundary ( )

pure virtual

Is the cell on the exterior boundary of the dataset?

Precondition: 2d: GetDimension()==2

◆ GetPointIds()

virtual void vtkGenericAdaptorCell::GetPointIds ( vtkIdType * id )

pure virtual

Put into ‘id’ the list of the dataset points that define the corner points of the cell.

Precondition: id_exists: id!=0; valid_size: sizeof(id)==GetNumberOfPoints();

◆ TriangulateFace()

virtual void vtkGenericAdaptorCell::TriangulateFace	(	vtkGenericAttributeCollection *	attributes,
		vtkGenericCellTessellator *	tess,
		int	index,
		vtkPoints *	points,
		vtkIncrementalPointLocator *	locator,
		vtkCellArray *	cellArray,
		vtkPointData *	internalPd,
		vtkPointData *	pd,
		vtkCellData *	cd
	)

virtual

Tessellate face ‘index’ of the cell.

See Tessellate() for further explanations.

Precondition: cell_is_3d: GetDimension()==3; attributes_exist: attributes!=0; tessellator_exists: tess!=0; valid_face: index>=0; points_exist: points!=0; cellArray_exists: cellArray!=0; internalPd_exists: internalPd!=0; pd_exist: pd!=0; cd_exists: cd!=0

◆ GetFaceArray()

virtual const vtkIdType * vtkGenericAdaptorCell::GetFaceArray ( vtkIdType faceId )

pure virtual

Return the ids of the vertices defining face ‘faceId’.

Ids are related to the cell, not to the dataset.

Precondition: is_3d: this->GetDimension()==3; valid_faceId_range: faceId>=0 && faceId<this->GetNumberOfBoundaries(2)

Postcondition: result_exists: result!=0; valid_size: sizeof(result)>=GetNumberOfVerticesOnFace(faceId)

Note: The return type changed. It used to be int*, it is now const vtkIdType*. This is so ids are unified between vtkCell and vtkPoints, and so vtkCell ids can be used as inputs in algorithms such as vtkPolygon::ComputeNormal.

◆ GetNumberOfVerticesOnFace()

virtual int vtkGenericAdaptorCell::GetNumberOfVerticesOnFace ( int faceId )

pure virtual

Return the number of vertices defining face ‘faceId’.

Precondition: is_3d: this->GetDimension()==3; valid_faceId_range: faceId>=0 && faceId<this->GetNumberOfBoundaries(2)

Postcondition: positive_result: && result>0

◆ GetEdgeArray()

virtual const vtkIdType * vtkGenericAdaptorCell::GetEdgeArray ( vtkIdType edgeId )

pure virtual

Return the ids of the vertices defining edge ‘edgeId’.

Ids are related to the cell, not to the dataset.

Precondition: valid_dimension: this->GetDimension()>=2; valid_edgeId_range: edgeId>=0 && edgeId<this->GetNumberOfBoundaries(1)

Postcondition: result_exists: result!=0; valid_size: sizeof(result)==2

Note: The return type changed. It used to be int*, it is now const vtkIdType*. This is so ids are unified between vtkCell and vtkPoints.

◆ Reset()

void vtkGenericAdaptorCell::Reset ( )

protected

Reset internal structures.

◆ AllocateTuples()

void vtkGenericAdaptorCell::AllocateTuples ( int size )

protected

Allocate some memory if Tuples does not exist or is smaller than size.

Precondition: positive_size: size>0

Member Data Documentation

◆ Tetra

vtkTetra* vtkGenericAdaptorCell::Tetra

protected

Definition at line 586 of file vtkGenericAdaptorCell.h.

◆ Triangle

vtkTriangle* vtkGenericAdaptorCell::Triangle

protected

Definition at line 587 of file vtkGenericAdaptorCell.h.

◆ Line

vtkLine* vtkGenericAdaptorCell::Line

protected

Definition at line 588 of file vtkGenericAdaptorCell.h.

◆ Vertex

vtkVertex* vtkGenericAdaptorCell::Vertex

protected

Definition at line 589 of file vtkGenericAdaptorCell.h.

◆ Quad

vtkQuad* vtkGenericAdaptorCell::Quad

protected

Definition at line 590 of file vtkGenericAdaptorCell.h.

◆ Hexa

vtkHexahedron* vtkGenericAdaptorCell::Hexa

protected

Definition at line 591 of file vtkGenericAdaptorCell.h.

◆ Wedge

vtkWedge* vtkGenericAdaptorCell::Wedge

protected

Definition at line 592 of file vtkGenericAdaptorCell.h.

◆ Pyramid

vtkPyramid* vtkGenericAdaptorCell::Pyramid

protected

Definition at line 593 of file vtkGenericAdaptorCell.h.

◆ InternalPoints

vtkDoubleArray* vtkGenericAdaptorCell::InternalPoints

protected

Definition at line 600 of file vtkGenericAdaptorCell.h.

◆ InternalCellArray

vtkCellArray* vtkGenericAdaptorCell::InternalCellArray

protected

Definition at line 601 of file vtkGenericAdaptorCell.h.

◆ InternalScalars

vtkDoubleArray* vtkGenericAdaptorCell::InternalScalars

protected

Definition at line 602 of file vtkGenericAdaptorCell.h.

◆ PointDataScalars

vtkDoubleArray* vtkGenericAdaptorCell::PointDataScalars

protected

Definition at line 603 of file vtkGenericAdaptorCell.h.

◆ InternalIds

vtkIdList* vtkGenericAdaptorCell::InternalIds

protected

Definition at line 605 of file vtkGenericAdaptorCell.h.

◆ Scalars

vtkDoubleArray* vtkGenericAdaptorCell::Scalars

protected

Definition at line 608 of file vtkGenericAdaptorCell.h.

◆ PointData

vtkPointData* vtkGenericAdaptorCell::PointData

protected

Definition at line 609 of file vtkGenericAdaptorCell.h.

◆ CellData

vtkCellData* vtkGenericAdaptorCell::CellData

protected

Definition at line 610 of file vtkGenericAdaptorCell.h.

◆ Tuples

double* vtkGenericAdaptorCell::Tuples

protected

Definition at line 614 of file vtkGenericAdaptorCell.h.

◆ TuplesCapacity

int vtkGenericAdaptorCell::TuplesCapacity

protected

Definition at line 615 of file vtkGenericAdaptorCell.h.

◆ Bounds

double vtkGenericAdaptorCell::Bounds[6]

protected

Definition at line 618 of file vtkGenericAdaptorCell.h.

The documentation for this class was generated from the following file:

Common/DataModel/vtkGenericAdaptorCell.h

Public Types

Public Member Functions

Static Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Member Typedef Documentation

◆ Superclass

Constructor & Destructor Documentation

◆ vtkGenericAdaptorCell()

◆ ~vtkGenericAdaptorCell()

Member Function Documentation

◆ IsTypeOf()

◆ IsA()

◆ SafeDownCast()

◆ NewInstanceInternal()

◆ NewInstance()

◆ PrintSelf()

◆ GetId()

◆ IsInDataSet()

◆ GetType()

◆ GetDimension()

◆ GetGeometryOrder()

◆ IsGeometryLinear()

◆ GetAttributeOrder()

◆ GetHighestOrderAttribute()

◆ IsAttributeLinear()

◆ IsPrimary()

◆ GetNumberOfPoints()

◆ GetNumberOfBoundaries()

◆ GetNumberOfDOFNodes()

◆ GetPointIterator()

◆ NewCellIterator()

◆ GetBoundaryIterator()

◆ CountNeighbors()

◆ CountEdgeNeighbors()

◆ GetNeighbors()

◆ FindClosestBoundary()

◆ EvaluatePosition()

◆ EvaluateLocation()

◆ InterpolateTuple() [1/2]

◆ InterpolateTuple() [2/2]

◆ Contour()

◆ Clip()

◆ IntersectWithLine()

◆ Derivatives()

◆ GetBounds() [1/2]

◆ GetBounds() [2/2]

◆ GetLength2()

◆ GetParametricCenter()

◆ GetParametricDistance()

◆ GetParametricCoords()

◆ Tessellate()

◆ IsFaceOnBoundary()

◆ IsOnBoundary()

◆ GetPointIds()

◆ TriangulateFace()

◆ GetFaceArray()

◆ GetNumberOfVerticesOnFace()

◆ GetEdgeArray()

◆ Reset()

◆ AllocateTuples()

Member Data Documentation

◆ Tetra

◆ Triangle

◆ Line

◆ Vertex

◆ Quad

◆ Hexa

◆ Wedge

◆ Pyramid

◆ InternalPoints

◆ InternalCellArray

◆ InternalScalars

◆ PointDataScalars

◆ InternalIds

◆ Scalars

◆ PointData

◆ CellData