VTK
9.1.0
|
Defines a transfer function for mapping a property to an RGB color value. More...
#include <vtkColorTransferFunction.h>
Public Types | |
typedef vtkScalarsToColors | Superclass |
Public Types inherited from vtkScalarsToColors | |
enum | VectorModes { MAGNITUDE = 0 , COMPONENT = 1 , RGBCOLORS = 2 } |
typedef vtkObject | Superclass |
Public Member Functions | |
virtual vtkTypeBool | IsA (const char *type) |
Return 1 if this class is the same type of (or a subclass of) the named class. More... | |
vtkColorTransferFunction * | NewInstance () const |
void | DeepCopy (vtkScalarsToColors *f) override |
Copy the contents from another object. More... | |
void | ShallowCopy (vtkColorTransferFunction *f) |
void | PrintSelf (ostream &os, vtkIndent indent) override |
Print method for vtkColorTransferFunction. More... | |
int | GetSize () |
How many nodes define this function? More... | |
void | RemoveAllPoints () |
Remove all points. More... | |
double * | GetColor (double x) |
Returns an RGB color for the specified scalar value. More... | |
void | GetColor (double x, double rgb[3]) override |
Map one value through the lookup table and store the color as an RGB array of doubles between 0 and 1 in the rgb argument. More... | |
const unsigned char * | MapValue (double v) override |
Map one value through the lookup table. More... | |
int | AdjustRange (double range[2]) |
Remove all points out of the new range, and make sure there is a point at each end of that range. More... | |
void | BuildFunctionFromTable (double x1, double x2, int size, double *table) |
Construct a color transfer function from a table. More... | |
double * | GetDataPointer () |
Returns a pointer to an array of all node values in an interleaved array with the layout [X1, R1, G1, B1, X2, R2, G2, B2, ..., Xn, Rn, Gn, Bn] where n is the number of nodes defining the transfer function. More... | |
void | FillFromDataPointer (int n, double *ptr) |
Defines the nodes from an array ptr with the layout [X1, R1, G1, B1, X2, R2, G2, B2, ..., Xn, Rn, Gn, Bn] where n is the number of nodes. More... | |
void | MapScalarsThroughTable2 (void *input, unsigned char *output, int inputDataType, int numberOfValues, int inputIncrement, int outputIncrement) override |
Map a set of scalars through the lookup table. More... | |
vtkIdType | GetNumberOfAvailableColors () override |
Get the number of available colors for mapping to. More... | |
void | GetIndexedColor (vtkIdType idx, double rgba[4]) override |
Return a color given an integer index. More... | |
int | EstimateMinNumberOfSamples (double const &x1, double const &x2) |
Estimates the minimum size of a table such that it would correctly sample this function. More... | |
int | AddRGBPoint (double x, double r, double g, double b) |
Add/Remove a point to/from the function defined in RGB or HSV Return the index of the point (0 based), or -1 on error. More... | |
int | AddRGBPoint (double x, double r, double g, double b, double midpoint, double sharpness) |
Add/Remove a point to/from the function defined in RGB or HSV Return the index of the point (0 based), or -1 on error. More... | |
int | AddHSVPoint (double x, double h, double s, double v) |
Add/Remove a point to/from the function defined in RGB or HSV Return the index of the point (0 based), or -1 on error. More... | |
int | AddHSVPoint (double x, double h, double s, double v, double midpoint, double sharpness) |
Add/Remove a point to/from the function defined in RGB or HSV Return the index of the point (0 based), or -1 on error. More... | |
int | RemovePoint (double x) |
Add/Remove a point to/from the function defined in RGB or HSV Return the index of the point (0 based), or -1 on error. More... | |
void | AddRGBSegment (double x1, double r1, double g1, double b1, double x2, double r2, double g2, double b2) |
Add two points to the function and remove all the points between them. More... | |
void | AddHSVSegment (double x1, double h1, double s1, double v1, double x2, double h2, double s2, double v2) |
Add two points to the function and remove all the points between them. More... | |
double | GetRedValue (double x) |
Get the color components individually. More... | |
double | GetGreenValue (double x) |
Get the color components individually. More... | |
double | GetBlueValue (double x) |
Get the color components individually. More... | |
int | GetNodeValue (int index, double val[6]) |
For the node specified by index, set/get the location (X), R, G, and B values, midpoint, and sharpness values at the node. More... | |
int | SetNodeValue (int index, double val[6]) |
For the node specified by index, set/get the location (X), R, G, and B values, midpoint, and sharpness values at the node. More... | |
double * | GetRange () override |
Returns min and max position of all function points. More... | |
virtual void | GetRange (double &arg1, double &arg2) |
Returns min and max position of all function points. More... | |
virtual void | GetRange (double _arg[2]) |
Returns min and max position of all function points. More... | |
void | GetTable (double x1, double x2, int n, double *table) |
Fills in a table of n colors mapped from values mapped with even spacing between x1 and x2, inclusive. More... | |
void | GetTable (double x1, double x2, int n, float *table) |
Fills in a table of n colors mapped from values mapped with even spacing between x1 and x2, inclusive. More... | |
const unsigned char * | GetTable (double x1, double x2, int n) |
Fills in a table of n colors mapped from values mapped with even spacing between x1 and x2, inclusive. More... | |
virtual void | SetClamping (vtkTypeBool) |
Sets/gets whether clamping is used. More... | |
virtual vtkTypeBool | GetClamping () |
Sets/gets whether clamping is used. More... | |
virtual void | ClampingOn () |
Sets/gets whether clamping is used. More... | |
virtual void | ClampingOff () |
Sets/gets whether clamping is used. More... | |
virtual void | SetColorSpace (int) |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step. More... | |
void | SetColorSpaceToRGB () |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step. More... | |
void | SetColorSpaceToHSV () |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step. More... | |
void | SetColorSpaceToLab () |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step. More... | |
void | SetColorSpaceToLabCIEDE2000 () |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step. More... | |
void | SetColorSpaceToDiverging () |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step. More... | |
void | SetColorSpaceToStep () |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step. More... | |
virtual int | GetColorSpace () |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step. More... | |
virtual void | SetHSVWrap (vtkTypeBool) |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step. More... | |
virtual vtkTypeBool | GetHSVWrap () |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step. More... | |
virtual void | HSVWrapOn () |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step. More... | |
virtual void | HSVWrapOff () |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step. More... | |
virtual void | SetScale (int) |
Set the type of scale to use, linear or logarithmic. More... | |
void | SetScaleToLinear () |
Set the type of scale to use, linear or logarithmic. More... | |
void | SetScaleToLog10 () |
Set the type of scale to use, linear or logarithmic. More... | |
virtual int | GetScale () |
Set the type of scale to use, linear or logarithmic. More... | |
virtual void | SetNanColor (double, double, double) |
Set the RGB color to use when a NaN (not a number) is encountered. More... | |
virtual void | SetNanColor (double[3]) |
Set the RGB color to use when a NaN (not a number) is encountered. More... | |
virtual double * | GetNanColor () |
Set the RGB color to use when a NaN (not a number) is encountered. More... | |
virtual void | GetNanColor (double &, double &, double &) |
Set the RGB color to use when a NaN (not a number) is encountered. More... | |
virtual void | GetNanColor (double[3]) |
Set the RGB color to use when a NaN (not a number) is encountered. More... | |
virtual void | SetNanOpacity (double) |
Get/Set the opacity to use when a NaN (not a number) is encountered. More... | |
virtual double | GetNanOpacity () |
Get/Set the opacity to use when a NaN (not a number) is encountered. More... | |
virtual void | SetNanColorRGBA (double r, double g, double b, double a) |
Set the RGBA color to use when a NaN (not a number) is encountered. More... | |
void | SetNanColorRGBA (double rgba[4]) |
Set the RGBA color to use when a NaN (not a number) is encountered. More... | |
virtual void | SetBelowRangeColor (double, double, double) |
Set the color to use when a value below the range is encountered. More... | |
virtual void | SetBelowRangeColor (double[3]) |
Set the color to use when a value below the range is encountered. More... | |
virtual double * | GetBelowRangeColor () |
Set the color to use when a value below the range is encountered. More... | |
virtual void | GetBelowRangeColor (double &, double &, double &) |
Set the color to use when a value below the range is encountered. More... | |
virtual void | GetBelowRangeColor (double[3]) |
Set the color to use when a value below the range is encountered. More... | |
virtual void | SetUseBelowRangeColor (vtkTypeBool) |
Set whether the below range color should be used. More... | |
virtual vtkTypeBool | GetUseBelowRangeColor () |
Set whether the below range color should be used. More... | |
virtual void | UseBelowRangeColorOn () |
Set whether the below range color should be used. More... | |
virtual void | UseBelowRangeColorOff () |
Set whether the below range color should be used. More... | |
virtual void | SetAboveRangeColor (double, double, double) |
Set the color to use when a value above the range is encountered. More... | |
virtual void | SetAboveRangeColor (double[3]) |
Set the color to use when a value above the range is encountered. More... | |
virtual double * | GetAboveRangeColor () |
Set the color to use when a value above the range is encountered. More... | |
virtual void | GetAboveRangeColor (double &, double &, double &) |
Set the color to use when a value above the range is encountered. More... | |
virtual void | GetAboveRangeColor (double[3]) |
Set the color to use when a value above the range is encountered. More... | |
virtual void | SetUseAboveRangeColor (vtkTypeBool) |
Set whether the below range color should be used. More... | |
virtual vtkTypeBool | GetUseAboveRangeColor () |
Set whether the below range color should be used. More... | |
virtual void | UseAboveRangeColorOn () |
Set whether the below range color should be used. More... | |
virtual void | UseAboveRangeColorOff () |
Set whether the below range color should be used. More... | |
virtual void | SetAllowDuplicateScalars (vtkTypeBool) |
Toggle whether to allow duplicate scalar values in the color transfer function (off by default). More... | |
virtual vtkTypeBool | GetAllowDuplicateScalars () |
Toggle whether to allow duplicate scalar values in the color transfer function (off by default). More... | |
virtual void | AllowDuplicateScalarsOn () |
Toggle whether to allow duplicate scalar values in the color transfer function (off by default). More... | |
virtual void | AllowDuplicateScalarsOff () |
Toggle whether to allow duplicate scalar values in the color transfer function (off by default). More... | |
Public Member Functions inherited from vtkScalarsToColors | |
virtual vtkTypeBool | IsA (const char *type) |
Return 1 if this class is the same type of (or a subclass of) the named class. More... | |
vtkScalarsToColors * | NewInstance () const |
void | PrintSelf (ostream &os, vtkIndent indent) override |
Methods invoked by print to print information about the object including superclasses. More... | |
virtual void | Build () |
Perform any processing required (if any) before processing scalars. More... | |
virtual const unsigned char * | MapValue (double v) |
Map one value through the lookup table and return a color defined as an RGBA unsigned char tuple (4 bytes). More... | |
virtual void | GetColor (double v, double rgb[3]) |
Map one value through the lookup table and store the color as an RGB array of doubles between 0 and 1 in the rgb argument. More... | |
double * | GetColor (double v) |
Map one value through the lookup table and return the color as an RGB array of doubles between 0 and 1. More... | |
virtual double | GetOpacity (double v) |
Map one value through the lookup table and return the alpha value (the opacity) as a double between 0 and 1. More... | |
double | GetLuminance (double x) |
Map one value through the lookup table and return the luminance 0.3*red + 0.59*green + 0.11*blue as a double between 0 and 1. More... | |
void | MapVectorsThroughTable (void *input, unsigned char *output, int inputDataType, int numberOfValues, int inputIncrement, int outputFormat, int vectorComponent, int vectorSize) |
Map vectors through the lookup table. More... | |
void | MapVectorsThroughTable (void *input, unsigned char *output, int inputDataType, int numberOfValues, int inputIncrement, int outputFormat) |
void | MapScalarsThroughTable (vtkDataArray *scalars, unsigned char *output, int outputFormat) |
Map a set of scalars through the lookup table in a single operation. More... | |
void | MapScalarsThroughTable (vtkDataArray *scalars, unsigned char *output) |
void | MapScalarsThroughTable (void *input, unsigned char *output, int inputDataType, int numberOfValues, int inputIncrement, int outputFormat) |
virtual void | MapScalarsThroughTable2 (void *input, unsigned char *output, int inputDataType, int numberOfValues, int inputIncrement, int outputFormat) |
An internal method typically not used in applications. More... | |
virtual void | DeepCopy (vtkScalarsToColors *o) |
Copy the contents from another object. More... | |
virtual int | UsingLogScale () |
This should return 1 is the subclass is using log scale for mapping scalars to colors. More... | |
virtual vtkIdType | GetNumberOfAvailableColors () |
Get the number of available colors for mapping to. More... | |
virtual vtkIdType | SetAnnotation (vtkVariant value, vtkStdString annotation) |
Add a new entry (or change an existing entry) to the list of annotated values. More... | |
virtual vtkIdType | SetAnnotation (vtkStdString value, vtkStdString annotation) |
This variant of SetAnnotation accepts the value as a string so ParaView can treat annotations as string vector arrays. More... | |
vtkIdType | GetNumberOfAnnotatedValues () |
Return the annotated value at a particular index in the list of annotations. More... | |
vtkVariant | GetAnnotatedValue (vtkIdType idx) |
Return the annotated value at a particular index in the list of annotations. More... | |
vtkStdString | GetAnnotation (vtkIdType idx) |
Return the annotation at a particular index in the list of annotations. More... | |
virtual void | GetAnnotationColor (const vtkVariant &val, double rgba[4]) |
Obtain the color associated with a particular annotated value (or NanColor if unmatched). More... | |
vtkIdType | GetAnnotatedValueIndex (vtkVariant val) |
Return the index of the given value in the list of annotated values (or -1 if not present). More... | |
vtkIdType | GetAnnotatedValueIndexInternal (const vtkVariant &val) |
Look up an index into the array of annotations given a value. More... | |
virtual void | GetIndexedColor (vtkIdType i, double rgba[4]) |
Get the "indexed color" assigned to an index. More... | |
virtual bool | RemoveAnnotation (vtkVariant value) |
Remove an existing entry from the list of annotated values. More... | |
virtual void | ResetAnnotations () |
Remove all existing values and their annotations. More... | |
virtual int | IsOpaque () |
Return true if all of the values defining the mapping have an opacity equal to 1. More... | |
virtual int | IsOpaque (vtkAbstractArray *scalars, int colorMode, int component) |
Return true if all of the values defining the mapping have an opacity equal to 1. More... | |
virtual void | SetAlpha (double alpha) |
Specify an additional opacity (alpha) value to blend with. More... | |
virtual double | GetAlpha () |
Specify an additional opacity (alpha) value to blend with. More... | |
virtual vtkUnsignedCharArray * | MapScalars (vtkDataArray *scalars, int colorMode, int component, int outputFormat=VTK_RGBA) |
Internal methods that map a data array into an unsigned char array. More... | |
virtual vtkUnsignedCharArray * | MapScalars (vtkAbstractArray *scalars, int colorMode, int component, int outputFormat=VTK_RGBA) |
Internal methods that map a data array into an unsigned char array. More... | |
virtual void | SetVectorMode (int) |
Change mode that maps vectors by magnitude vs. More... | |
virtual int | GetVectorMode () |
Change mode that maps vectors by magnitude vs. More... | |
void | SetVectorModeToMagnitude () |
Change mode that maps vectors by magnitude vs. More... | |
void | SetVectorModeToComponent () |
Change mode that maps vectors by magnitude vs. More... | |
void | SetVectorModeToRGBColors () |
Change mode that maps vectors by magnitude vs. More... | |
virtual void | SetVectorComponent (int) |
If the mapper does not select which component of a vector to map to colors, you can specify it here. More... | |
virtual int | GetVectorComponent () |
If the mapper does not select which component of a vector to map to colors, you can specify it here. More... | |
virtual void | SetVectorSize (int) |
When mapping vectors, consider only the number of components selected by VectorSize to be part of the vector, and ignore any other components. More... | |
virtual int | GetVectorSize () |
When mapping vectors, consider only the number of components selected by VectorSize to be part of the vector, and ignore any other components. More... | |
virtual void | SetAnnotations (vtkAbstractArray *values, vtkStringArray *annotations) |
Set a list of discrete values, either as a categorical set of values (when IndexedLookup is true) or as a set of annotations to add to a scalar array (when IndexedLookup is false). More... | |
virtual vtkAbstractArray * | GetAnnotatedValues () |
Set a list of discrete values, either as a categorical set of values (when IndexedLookup is true) or as a set of annotations to add to a scalar array (when IndexedLookup is false). More... | |
virtual vtkStringArray * | GetAnnotations () |
Set a list of discrete values, either as a categorical set of values (when IndexedLookup is true) or as a set of annotations to add to a scalar array (when IndexedLookup is false). More... | |
virtual void | SetIndexedLookup (vtkTypeBool) |
Set/get whether the lookup table is for categorical or ordinal data. More... | |
virtual vtkTypeBool | GetIndexedLookup () |
Set/get whether the lookup table is for categorical or ordinal data. More... | |
virtual void | IndexedLookupOn () |
Set/get whether the lookup table is for categorical or ordinal data. More... | |
virtual void | IndexedLookupOff () |
Set/get whether the lookup table is for categorical or ordinal data. More... | |
template<> | |
unsigned char | ColorToUChar (double t) |
Specializations of vtkScalarsToColors::ColorToUChar Converts from a color in a floating point type in range 0.0-1.0 to a uchar in range 0-255. More... | |
template<> | |
unsigned char | ColorToUChar (float t) |
Specializations of vtkScalarsToColors::ColorToUChar Converts from a color in a floating point type in range 0.0-1.0 to a uchar in range 0-255. More... | |
Public Member Functions inherited from vtkObject | |
vtkBaseTypeMacro (vtkObject, vtkObjectBase) | |
virtual void | DebugOn () |
Turn debugging output on. More... | |
virtual void | DebugOff () |
Turn debugging output off. More... | |
bool | GetDebug () |
Get the value of the debug flag. More... | |
void | SetDebug (bool debugFlag) |
Set the value of the debug flag. More... | |
virtual void | Modified () |
Update the modification time for this object. More... | |
virtual vtkMTimeType | GetMTime () |
Return this object's modified time. More... | |
void | PrintSelf (ostream &os, vtkIndent indent) override |
Methods invoked by print to print information about the object including superclasses. More... | |
void | RemoveObserver (unsigned long tag) |
void | RemoveObservers (unsigned long event) |
void | RemoveObservers (const char *event) |
void | RemoveAllObservers () |
vtkTypeBool | HasObserver (unsigned long event) |
vtkTypeBool | HasObserver (const char *event) |
int | InvokeEvent (unsigned long event) |
int | InvokeEvent (const char *event) |
unsigned long | AddObserver (unsigned long event, vtkCommand *, float priority=0.0f) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. More... | |
unsigned long | AddObserver (const char *event, vtkCommand *, float priority=0.0f) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. More... | |
vtkCommand * | GetCommand (unsigned long tag) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. More... | |
void | RemoveObserver (vtkCommand *) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. More... | |
void | RemoveObservers (unsigned long event, vtkCommand *) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. More... | |
void | RemoveObservers (const char *event, vtkCommand *) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. More... | |
vtkTypeBool | HasObserver (unsigned long event, vtkCommand *) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. More... | |
vtkTypeBool | HasObserver (const char *event, vtkCommand *) |
Allow people to add/remove/invoke observers (callbacks) to any VTK object. More... | |
template<class U , class T > | |
unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f) |
Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More... | |
template<class U , class T > | |
unsigned long | AddObserver (unsigned long event, U observer, void(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More... | |
template<class U , class T > | |
unsigned long | AddObserver (unsigned long event, U observer, bool(T::*callback)(vtkObject *, unsigned long, void *), float priority=0.0f) |
Allow user to set the AbortFlagOn() with the return value of the callback method. More... | |
int | InvokeEvent (unsigned long event, void *callData) |
This method invokes an event and return whether the event was aborted or not. More... | |
int | InvokeEvent (const char *event, void *callData) |
This method invokes an event and return whether the event was aborted or not. More... | |
Public Member Functions inherited from vtkObjectBase | |
const char * | GetClassName () const |
Return the class name as a string. More... | |
virtual vtkTypeBool | IsA (const char *name) |
Return 1 if this class is the same type of (or a subclass of) the named class. More... | |
virtual vtkIdType | GetNumberOfGenerationsFromBase (const char *name) |
Given the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More... | |
virtual void | Delete () |
Delete a VTK object. More... | |
virtual void | FastDelete () |
Delete a reference to this object. More... | |
void | InitializeObjectBase () |
void | Print (ostream &os) |
Print an object to an ostream. More... | |
virtual void | Register (vtkObjectBase *o) |
Increase the reference count (mark as used by another object). More... | |
virtual void | UnRegister (vtkObjectBase *o) |
Decrease the reference count (release by another object). More... | |
int | GetReferenceCount () |
Return the current reference count of this object. More... | |
void | SetReferenceCount (int) |
Sets the reference count. More... | |
bool | GetIsInMemkind () const |
A local state flag that remembers whether this object lives in the normal or extended memory space. More... | |
virtual void | PrintHeader (ostream &os, vtkIndent indent) |
Methods invoked by print to print information about the object including superclasses. More... | |
virtual void | PrintTrailer (ostream &os, vtkIndent indent) |
Methods invoked by print to print information about the object including superclasses. More... | |
Static Public Member Functions | |
static vtkColorTransferFunction * | New () |
static vtkTypeBool | IsTypeOf (const char *type) |
static vtkColorTransferFunction * | SafeDownCast (vtkObjectBase *o) |
Static Public Member Functions inherited from vtkScalarsToColors | |
static vtkTypeBool | IsTypeOf (const char *type) |
static vtkScalarsToColors * | SafeDownCast (vtkObjectBase *o) |
static vtkScalarsToColors * | New () |
template<typename T > | |
static unsigned char | ColorToUChar (T t) |
Converts a color from numeric type T to uchar. More... | |
template<typename T > | |
static void | ColorToUChar (T t, unsigned char *dest) |
Converts a color from numeric type T to uchar. More... | |
Static Public Member Functions inherited from vtkObject | |
static vtkObject * | New () |
Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More... | |
static void | BreakOnError () |
This method is called when vtkErrorMacro executes. More... | |
static void | SetGlobalWarningDisplay (int val) |
This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
static void | GlobalWarningDisplayOn () |
This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
static void | GlobalWarningDisplayOff () |
This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
static int | GetGlobalWarningDisplay () |
This is a global flag that controls whether any debug, warning or error messages are displayed. More... | |
Static Public Member Functions inherited from vtkObjectBase | |
static vtkTypeBool | IsTypeOf (const char *name) |
Return 1 if this class type is the same type of (or a subclass of) the named class. More... | |
static vtkIdType | GetNumberOfGenerationsFromBaseType (const char *name) |
Given a the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More... | |
static vtkObjectBase * | New () |
Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More... | |
static void | SetMemkindDirectory (const char *directoryname) |
The name of a directory, ideally mounted -o dax, to memory map an extended memory space within. More... | |
static bool | GetUsingMemkind () |
A global state flag that controls whether vtkObjects are constructed in the usual way (the default) or within the extended memory space. More... | |
Protected Member Functions | |
virtual vtkObjectBase * | NewInstanceInternal () const |
vtkColorTransferFunction () | |
~vtkColorTransferFunction () override | |
void | SetRange (double, double) override |
Set the range of scalars being mapped. More... | |
void | SetRange (const double rng[2]) override |
Sets/Gets the range of scalars that will be mapped. More... | |
void | SortAndUpdateRange () |
Internal method to sort the vector and update the Range whenever a node is added, edited or removed It always calls Modified(). More... | |
bool | UpdateRange () |
Returns true if the range has been changed. More... | |
void | MovePoint (double oldX, double newX) |
Moves point from oldX to newX. More... | |
double | FindMinimumXDistance () |
Traverses the nodes to find the minimum distance. More... | |
Protected Member Functions inherited from vtkScalarsToColors | |
virtual vtkObjectBase * | NewInstanceInternal () const |
vtkScalarsToColors () | |
~vtkScalarsToColors () override | |
void | MapColorsToColors (void *input, unsigned char *output, int inputDataType, int numberOfValues, int numberOfComponents, int vectorSize, int outputFormat) |
An internal method that assumes that the input already has the right colors, and only remaps the range to [0,255] and pads to the desired output format. More... | |
vtkUnsignedCharArray * | ConvertToRGBA (vtkDataArray *colors, int numComp, int numTuples) |
An internal method used to convert a color array to RGBA. More... | |
void | MapVectorsToMagnitude (void *input, double *output, int inputDataType, int numberOfValues, int numberOfComponents, int vectorSize) |
An internal method for converting vectors to magnitudes, used as a preliminary step before doing magnitude mapping. More... | |
virtual vtkIdType | CheckForAnnotatedValue (vtkVariant value) |
Allocate annotation arrays if needed, then return the index of the given value or -1 if not present. More... | |
virtual void | UpdateAnnotatedValueMap () |
Update the map from annotated values to indices in the array of annotations. More... | |
Protected Member Functions inherited from vtkObject | |
vtkObject () | |
~vtkObject () override | |
void | RegisterInternal (vtkObjectBase *, vtkTypeBool check) override |
void | UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override |
void | InternalGrabFocus (vtkCommand *mouseEvents, vtkCommand *keypressEvents=nullptr) |
These methods allow a command to exclusively grab all events. More... | |
void | InternalReleaseFocus () |
These methods allow a command to exclusively grab all events. More... | |
Protected Member Functions inherited from vtkObjectBase | |
vtkObjectBase () | |
virtual | ~vtkObjectBase () |
virtual void | RegisterInternal (vtkObjectBase *, vtkTypeBool check) |
virtual void | UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) |
virtual void | ReportReferences (vtkGarbageCollector *) |
vtkObjectBase (const vtkObjectBase &) | |
void | operator= (const vtkObjectBase &) |
Protected Attributes | |
vtkColorTransferFunctionInternals * | Internal |
vtkTypeBool | Clamping |
Determines the function value outside of defined points Zero = always return 0.0 outside of defined points One = clamp to the lowest value below defined points and highest value above defined points. More... | |
int | ColorSpace |
The color space in which interpolation is performed. More... | |
vtkTypeBool | HSVWrap |
Specify if HSV is wrap or not. More... | |
int | Scale |
The color interpolation scale (linear or logarithmic). More... | |
double | NanColor [3] |
The color to use for not-a-number. More... | |
double | NanOpacity |
The opacity to use for not-a-number. More... | |
double | BelowRangeColor [3] |
The below-range color. More... | |
vtkTypeBool | UseBelowRangeColor |
Flag indicating whether below-range color should be used. More... | |
double | AboveRangeColor [3] |
The above-range color. More... | |
vtkTypeBool | UseAboveRangeColor |
Flag indicating whether below-range color should be used. More... | |
double * | Function |
Temporary array to store data from the nodes. More... | |
double | Range [2] |
The min and max node locations. More... | |
unsigned char | UnsignedCharRGBAValue [4] |
Temporary storage for an evaluated color (0 to 255 RGBA A=255) More... | |
vtkTypeBool | AllowDuplicateScalars |
If on, the same scalar value may have more than one node assigned to it. More... | |
vtkTimeStamp | BuildTime |
unsigned char * | Table |
int | TableSize |
Temporary storage for the size of the table. More... | |
Protected Attributes inherited from vtkScalarsToColors | |
vtkAbstractArray * | AnnotatedValues |
vtkStringArray * | Annotations |
vtkInternalAnnotatedValueList * | AnnotatedValueList |
vtkTypeBool | IndexedLookup |
double | Alpha |
int | VectorMode |
int | VectorComponent |
int | VectorSize |
int | UseMagnitude |
unsigned char | RGBABytes [4] |
Protected Attributes inherited from vtkObject | |
bool | Debug |
vtkTimeStamp | MTime |
vtkSubjectHelper * | SubjectHelper |
Protected Attributes inherited from vtkObjectBase | |
std::atomic< int32_t > | ReferenceCount |
vtkWeakPointerBase ** | WeakPointers |
Additional Inherited Members | |
Static Protected Member Functions inherited from vtkObjectBase | |
static vtkMallocingFunction | GetCurrentMallocFunction () |
static vtkReallocingFunction | GetCurrentReallocFunction () |
static vtkFreeingFunction | GetCurrentFreeFunction () |
static vtkFreeingFunction | GetAlternateFreeFunction () |
Defines a transfer function for mapping a property to an RGB color value.
vtkColorTransferFunction is a color mapping in RGB or HSV space that uses piecewise hermite functions to allow interpolation that can be piecewise constant, piecewise linear, or somewhere in-between (a modified piecewise hermite function that squishes the function according to a sharpness parameter). The function also allows for the specification of the midpoint (the place where the function reaches the average of the two bounding nodes) as a normalize distance between nodes. See the description of class vtkPiecewiseFunction for an explanation of midpoint and sharpness.
Definition at line 163 of file vtkColorTransferFunction.h.
Definition at line 167 of file vtkColorTransferFunction.h.
|
protected |
|
overrideprotected |
|
static |
|
static |
|
virtual |
Return 1 if this class is the same type of (or a subclass of) the named class.
Returns 0 otherwise. This method works in combination with vtkTypeMacro found in vtkSetGet.h.
Reimplemented from vtkScalarsToColors.
Reimplemented in vtkDiscretizableColorTransferFunction.
|
static |
|
protectedvirtual |
Reimplemented from vtkScalarsToColors.
Reimplemented in vtkDiscretizableColorTransferFunction.
vtkColorTransferFunction * vtkColorTransferFunction::NewInstance | ( | ) | const |
|
overridevirtual |
Copy the contents from another object.
Reimplemented from vtkScalarsToColors.
void vtkColorTransferFunction::ShallowCopy | ( | vtkColorTransferFunction * | f | ) |
|
overridevirtual |
Print method for vtkColorTransferFunction.
Reimplemented from vtkScalarsToColors.
Reimplemented in vtkDiscretizableColorTransferFunction.
int vtkColorTransferFunction::GetSize | ( | ) |
How many nodes define this function?
int vtkColorTransferFunction::AddRGBPoint | ( | double | x, |
double | r, | ||
double | g, | ||
double | b | ||
) |
Add/Remove a point to/from the function defined in RGB or HSV Return the index of the point (0 based), or -1 on error.
See the description of class vtkPiecewiseFunction for an explanation of midpoint and sharpness.
int vtkColorTransferFunction::AddRGBPoint | ( | double | x, |
double | r, | ||
double | g, | ||
double | b, | ||
double | midpoint, | ||
double | sharpness | ||
) |
Add/Remove a point to/from the function defined in RGB or HSV Return the index of the point (0 based), or -1 on error.
See the description of class vtkPiecewiseFunction for an explanation of midpoint and sharpness.
int vtkColorTransferFunction::AddHSVPoint | ( | double | x, |
double | h, | ||
double | s, | ||
double | v | ||
) |
Add/Remove a point to/from the function defined in RGB or HSV Return the index of the point (0 based), or -1 on error.
See the description of class vtkPiecewiseFunction for an explanation of midpoint and sharpness.
int vtkColorTransferFunction::AddHSVPoint | ( | double | x, |
double | h, | ||
double | s, | ||
double | v, | ||
double | midpoint, | ||
double | sharpness | ||
) |
Add/Remove a point to/from the function defined in RGB or HSV Return the index of the point (0 based), or -1 on error.
See the description of class vtkPiecewiseFunction for an explanation of midpoint and sharpness.
int vtkColorTransferFunction::RemovePoint | ( | double | x | ) |
Add/Remove a point to/from the function defined in RGB or HSV Return the index of the point (0 based), or -1 on error.
See the description of class vtkPiecewiseFunction for an explanation of midpoint and sharpness.
void vtkColorTransferFunction::AddRGBSegment | ( | double | x1, |
double | r1, | ||
double | g1, | ||
double | b1, | ||
double | x2, | ||
double | r2, | ||
double | g2, | ||
double | b2 | ||
) |
Add two points to the function and remove all the points between them.
void vtkColorTransferFunction::AddHSVSegment | ( | double | x1, |
double | h1, | ||
double | s1, | ||
double | v1, | ||
double | x2, | ||
double | h2, | ||
double | s2, | ||
double | v2 | ||
) |
Add two points to the function and remove all the points between them.
void vtkColorTransferFunction::RemoveAllPoints | ( | ) |
Remove all points.
|
inline |
Returns an RGB color for the specified scalar value.
Definition at line 214 of file vtkColorTransferFunction.h.
|
overridevirtual |
Map one value through the lookup table and store the color as an RGB array of doubles between 0 and 1 in the rgb argument.
Reimplemented from vtkScalarsToColors.
Reimplemented in vtkDiscretizableColorTransferFunction.
double vtkColorTransferFunction::GetRedValue | ( | double | x | ) |
Get the color components individually.
double vtkColorTransferFunction::GetGreenValue | ( | double | x | ) |
Get the color components individually.
double vtkColorTransferFunction::GetBlueValue | ( | double | x | ) |
Get the color components individually.
int vtkColorTransferFunction::GetNodeValue | ( | int | index, |
double | val[6] | ||
) |
For the node specified by index, set/get the location (X), R, G, and B values, midpoint, and sharpness values at the node.
int vtkColorTransferFunction::SetNodeValue | ( | int | index, |
double | val[6] | ||
) |
For the node specified by index, set/get the location (X), R, G, and B values, midpoint, and sharpness values at the node.
|
overridevirtual |
Map one value through the lookup table.
Reimplemented from vtkScalarsToColors.
Reimplemented in vtkDiscretizableColorTransferFunction.
|
inlineoverridevirtual |
Returns min and max position of all function points.
Reimplemented from vtkScalarsToColors.
Definition at line 245 of file vtkColorTransferFunction.h.
|
inlinevirtual |
Returns min and max position of all function points.
Definition at line 246 of file vtkColorTransferFunction.h.
|
inlinevirtual |
Returns min and max position of all function points.
Definition at line 251 of file vtkColorTransferFunction.h.
int vtkColorTransferFunction::AdjustRange | ( | double | range[2] | ) |
Remove all points out of the new range, and make sure there is a point at each end of that range.
Returns 1 on success, 0 otherwise.
void vtkColorTransferFunction::GetTable | ( | double | x1, |
double | x2, | ||
int | n, | ||
double * | table | ||
) |
Fills in a table of n colors mapped from values mapped with even spacing between x1 and x2, inclusive.
Note that GetTable ignores IndexedLookup
void vtkColorTransferFunction::GetTable | ( | double | x1, |
double | x2, | ||
int | n, | ||
float * | table | ||
) |
Fills in a table of n colors mapped from values mapped with even spacing between x1 and x2, inclusive.
Note that GetTable ignores IndexedLookup
const unsigned char * vtkColorTransferFunction::GetTable | ( | double | x1, |
double | x2, | ||
int | n | ||
) |
Fills in a table of n colors mapped from values mapped with even spacing between x1 and x2, inclusive.
Note that GetTable ignores IndexedLookup
void vtkColorTransferFunction::BuildFunctionFromTable | ( | double | x1, |
double | x2, | ||
int | size, | ||
double * | table | ||
) |
Construct a color transfer function from a table.
Unlike FillFromDataPointer(), the table
parameter's layout is assumed to be [R1, G1, B1, R2, G2, B2, ..., Rn, Gn, Bn], and it is assumed to be a block of memory of size [3*size]. After calling this method, the function range will be [x1, x2], the function will have size
nodes, and function values will be regularly spaced between x1 and x2.
|
virtual |
Sets/gets whether clamping is used.
If on, scalar values below the lower range value set for the transfer function will be mapped to the first node color, and scalar values above the upper range value set for the transfer function will be mapped to the last node color. If off, values outside the range are mapped to black.
|
virtual |
Sets/gets whether clamping is used.
If on, scalar values below the lower range value set for the transfer function will be mapped to the first node color, and scalar values above the upper range value set for the transfer function will be mapped to the last node color. If off, values outside the range are mapped to black.
|
virtual |
Sets/gets whether clamping is used.
If on, scalar values below the lower range value set for the transfer function will be mapped to the first node color, and scalar values above the upper range value set for the transfer function will be mapped to the last node color. If off, values outside the range are mapped to black.
|
virtual |
Sets/gets whether clamping is used.
If on, scalar values below the lower range value set for the transfer function will be mapped to the first node color, and scalar values above the upper range value set for the transfer function will be mapped to the last node color. If off, values outside the range are mapped to black.
|
virtual |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step.
In HSV mode, if HSVWrap is on, it will take the shortest path in Hue (going back through 0 if that is the shortest way around the hue circle) whereas if HSVWrap is off it will not go through 0 (in order the match the current functionality of vtkLookupTable). In Lab/CIEDE2000 mode, it will take the shortest path in the Lab color space with respect to the CIE Delta E 2000 color distance measure. Diverging is a special mode where colors will pass through white when interpolating between two saturated colors. Step is a mode where the color of an interval is the color of the second color of the interval.
|
inline |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step.
In HSV mode, if HSVWrap is on, it will take the shortest path in Hue (going back through 0 if that is the shortest way around the hue circle) whereas if HSVWrap is off it will not go through 0 (in order the match the current functionality of vtkLookupTable). In Lab/CIEDE2000 mode, it will take the shortest path in the Lab color space with respect to the CIE Delta E 2000 color distance measure. Diverging is a special mode where colors will pass through white when interpolating between two saturated colors. Step is a mode where the color of an interval is the color of the second color of the interval.
Definition at line 312 of file vtkColorTransferFunction.h.
|
inline |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step.
In HSV mode, if HSVWrap is on, it will take the shortest path in Hue (going back through 0 if that is the shortest way around the hue circle) whereas if HSVWrap is off it will not go through 0 (in order the match the current functionality of vtkLookupTable). In Lab/CIEDE2000 mode, it will take the shortest path in the Lab color space with respect to the CIE Delta E 2000 color distance measure. Diverging is a special mode where colors will pass through white when interpolating between two saturated colors. Step is a mode where the color of an interval is the color of the second color of the interval.
Definition at line 313 of file vtkColorTransferFunction.h.
|
inline |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step.
In HSV mode, if HSVWrap is on, it will take the shortest path in Hue (going back through 0 if that is the shortest way around the hue circle) whereas if HSVWrap is off it will not go through 0 (in order the match the current functionality of vtkLookupTable). In Lab/CIEDE2000 mode, it will take the shortest path in the Lab color space with respect to the CIE Delta E 2000 color distance measure. Diverging is a special mode where colors will pass through white when interpolating between two saturated colors. Step is a mode where the color of an interval is the color of the second color of the interval.
Definition at line 314 of file vtkColorTransferFunction.h.
|
inline |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step.
In HSV mode, if HSVWrap is on, it will take the shortest path in Hue (going back through 0 if that is the shortest way around the hue circle) whereas if HSVWrap is off it will not go through 0 (in order the match the current functionality of vtkLookupTable). In Lab/CIEDE2000 mode, it will take the shortest path in the Lab color space with respect to the CIE Delta E 2000 color distance measure. Diverging is a special mode where colors will pass through white when interpolating between two saturated colors. Step is a mode where the color of an interval is the color of the second color of the interval.
Definition at line 315 of file vtkColorTransferFunction.h.
|
inline |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step.
In HSV mode, if HSVWrap is on, it will take the shortest path in Hue (going back through 0 if that is the shortest way around the hue circle) whereas if HSVWrap is off it will not go through 0 (in order the match the current functionality of vtkLookupTable). In Lab/CIEDE2000 mode, it will take the shortest path in the Lab color space with respect to the CIE Delta E 2000 color distance measure. Diverging is a special mode where colors will pass through white when interpolating between two saturated colors. Step is a mode where the color of an interval is the color of the second color of the interval.
Definition at line 316 of file vtkColorTransferFunction.h.
|
inline |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step.
In HSV mode, if HSVWrap is on, it will take the shortest path in Hue (going back through 0 if that is the shortest way around the hue circle) whereas if HSVWrap is off it will not go through 0 (in order the match the current functionality of vtkLookupTable). In Lab/CIEDE2000 mode, it will take the shortest path in the Lab color space with respect to the CIE Delta E 2000 color distance measure. Diverging is a special mode where colors will pass through white when interpolating between two saturated colors. Step is a mode where the color of an interval is the color of the second color of the interval.
Definition at line 317 of file vtkColorTransferFunction.h.
|
virtual |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step.
In HSV mode, if HSVWrap is on, it will take the shortest path in Hue (going back through 0 if that is the shortest way around the hue circle) whereas if HSVWrap is off it will not go through 0 (in order the match the current functionality of vtkLookupTable). In Lab/CIEDE2000 mode, it will take the shortest path in the Lab color space with respect to the CIE Delta E 2000 color distance measure. Diverging is a special mode where colors will pass through white when interpolating between two saturated colors. Step is a mode where the color of an interval is the color of the second color of the interval.
|
virtual |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step.
In HSV mode, if HSVWrap is on, it will take the shortest path in Hue (going back through 0 if that is the shortest way around the hue circle) whereas if HSVWrap is off it will not go through 0 (in order the match the current functionality of vtkLookupTable). In Lab/CIEDE2000 mode, it will take the shortest path in the Lab color space with respect to the CIE Delta E 2000 color distance measure. Diverging is a special mode where colors will pass through white when interpolating between two saturated colors. Step is a mode where the color of an interval is the color of the second color of the interval.
|
virtual |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step.
In HSV mode, if HSVWrap is on, it will take the shortest path in Hue (going back through 0 if that is the shortest way around the hue circle) whereas if HSVWrap is off it will not go through 0 (in order the match the current functionality of vtkLookupTable). In Lab/CIEDE2000 mode, it will take the shortest path in the Lab color space with respect to the CIE Delta E 2000 color distance measure. Diverging is a special mode where colors will pass through white when interpolating between two saturated colors. Step is a mode where the color of an interval is the color of the second color of the interval.
|
virtual |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step.
In HSV mode, if HSVWrap is on, it will take the shortest path in Hue (going back through 0 if that is the shortest way around the hue circle) whereas if HSVWrap is off it will not go through 0 (in order the match the current functionality of vtkLookupTable). In Lab/CIEDE2000 mode, it will take the shortest path in the Lab color space with respect to the CIE Delta E 2000 color distance measure. Diverging is a special mode where colors will pass through white when interpolating between two saturated colors. Step is a mode where the color of an interval is the color of the second color of the interval.
|
virtual |
Set/Get the color space used for interpolation: RGB, HSV, CIELAB, Diverging or Step.
In HSV mode, if HSVWrap is on, it will take the shortest path in Hue (going back through 0 if that is the shortest way around the hue circle) whereas if HSVWrap is off it will not go through 0 (in order the match the current functionality of vtkLookupTable). In Lab/CIEDE2000 mode, it will take the shortest path in the Lab color space with respect to the CIE Delta E 2000 color distance measure. Diverging is a special mode where colors will pass through white when interpolating between two saturated colors. Step is a mode where the color of an interval is the color of the second color of the interval.
|
virtual |
Set the type of scale to use, linear or logarithmic.
The default is linear. If the scale is logarithmic, and the range contains zero, the color mapping will be linear.
|
inline |
Set the type of scale to use, linear or logarithmic.
The default is linear. If the scale is logarithmic, and the range contains zero, the color mapping will be linear.
Definition at line 331 of file vtkColorTransferFunction.h.
|
inline |
Set the type of scale to use, linear or logarithmic.
The default is linear. If the scale is logarithmic, and the range contains zero, the color mapping will be linear.
Definition at line 332 of file vtkColorTransferFunction.h.
|
virtual |
Set the type of scale to use, linear or logarithmic.
The default is linear. If the scale is logarithmic, and the range contains zero, the color mapping will be linear.
|
virtual |
Set the RGB color to use when a NaN (not a number) is encountered.
This is an RGB 3-tuple color of doubles in the range [0,1].
Reimplemented in vtkDiscretizableColorTransferFunction.
|
virtual |
Set the RGB color to use when a NaN (not a number) is encountered.
This is an RGB 3-tuple color of doubles in the range [0,1].
Reimplemented in vtkDiscretizableColorTransferFunction.
|
virtual |
Set the RGB color to use when a NaN (not a number) is encountered.
This is an RGB 3-tuple color of doubles in the range [0,1].
|
virtual |
Set the RGB color to use when a NaN (not a number) is encountered.
This is an RGB 3-tuple color of doubles in the range [0,1].
|
virtual |
Set the RGB color to use when a NaN (not a number) is encountered.
This is an RGB 3-tuple color of doubles in the range [0,1].
|
virtual |
Get/Set the opacity to use when a NaN (not a number) is encountered.
This a double in the range [0,1].
Reimplemented in vtkDiscretizableColorTransferFunction.
|
virtual |
Get/Set the opacity to use when a NaN (not a number) is encountered.
This a double in the range [0,1].
|
inlinevirtual |
Set the RGBA color to use when a NaN (not a number) is encountered.
This is an RGBA 4-tuple color of doubles in the range [0,1].
Definition at line 361 of file vtkColorTransferFunction.h.
|
inline |
Set the RGBA color to use when a NaN (not a number) is encountered.
This is an RGBA 4-tuple color of doubles in the range [0,1].
Definition at line 367 of file vtkColorTransferFunction.h.
|
virtual |
Set the color to use when a value below the range is encountered.
This is an RGB 3-tuple of doubles in the range [0, 1].
|
virtual |
Set the color to use when a value below the range is encountered.
This is an RGB 3-tuple of doubles in the range [0, 1].
|
virtual |
Set the color to use when a value below the range is encountered.
This is an RGB 3-tuple of doubles in the range [0, 1].
|
virtual |
Set the color to use when a value below the range is encountered.
This is an RGB 3-tuple of doubles in the range [0, 1].
|
virtual |
Set the color to use when a value below the range is encountered.
This is an RGB 3-tuple of doubles in the range [0, 1].
|
virtual |
Set whether the below range color should be used.
|
virtual |
Set whether the below range color should be used.
|
virtual |
Set whether the below range color should be used.
|
virtual |
Set whether the below range color should be used.
|
virtual |
Set the color to use when a value above the range is encountered.
This is an RGB 3-tuple of doubles in the range [0, 1].
|
virtual |
Set the color to use when a value above the range is encountered.
This is an RGB 3-tuple of doubles in the range [0, 1].
|
virtual |
Set the color to use when a value above the range is encountered.
This is an RGB 3-tuple of doubles in the range [0, 1].
|
virtual |
Set the color to use when a value above the range is encountered.
This is an RGB 3-tuple of doubles in the range [0, 1].
|
virtual |
Set the color to use when a value above the range is encountered.
This is an RGB 3-tuple of doubles in the range [0, 1].
|
virtual |
Set whether the below range color should be used.
|
virtual |
Set whether the below range color should be used.
|
virtual |
Set whether the below range color should be used.
|
virtual |
Set whether the below range color should be used.
double * vtkColorTransferFunction::GetDataPointer | ( | ) |
Returns a pointer to an array of all node values in an interleaved array with the layout [X1, R1, G1, B1, X2, R2, G2, B2, ..., Xn, Rn, Gn, Bn] where n is the number of nodes defining the transfer function.
The returned pointer points to an array that is managed by this class, so callers should not free it.
void vtkColorTransferFunction::FillFromDataPointer | ( | int | n, |
double * | ptr | ||
) |
Defines the nodes from an array ptr with the layout [X1, R1, G1, B1, X2, R2, G2, B2, ..., Xn, Rn, Gn, Bn] where n is the number of nodes.
|
overridevirtual |
Map a set of scalars through the lookup table.
Reimplemented from vtkScalarsToColors.
Reimplemented in vtkDiscretizableColorTransferFunction.
|
virtual |
Toggle whether to allow duplicate scalar values in the color transfer function (off by default).
|
virtual |
Toggle whether to allow duplicate scalar values in the color transfer function (off by default).
|
virtual |
Toggle whether to allow duplicate scalar values in the color transfer function (off by default).
|
virtual |
Toggle whether to allow duplicate scalar values in the color transfer function (off by default).
|
overridevirtual |
Get the number of available colors for mapping to.
Reimplemented from vtkScalarsToColors.
Reimplemented in vtkDiscretizableColorTransferFunction.
|
overridevirtual |
Return a color given an integer index.
This is used to assign colors to annotations (given an offset into the list of annotations). If there are no control points or idx < 0, then NanColor is returned.
Reimplemented from vtkScalarsToColors.
Reimplemented in vtkDiscretizableColorTransferFunction.
int vtkColorTransferFunction::EstimateMinNumberOfSamples | ( | double const & | x1, |
double const & | x2 | ||
) |
Estimates the minimum size of a table such that it would correctly sample this function.
The returned value should be passed as parameter 'n' when calling GetTable().
|
inlineoverrideprotectedvirtual |
Set the range of scalars being mapped.
This method has no functionality in this subclass of vtkScalarsToColors.
Reimplemented from vtkScalarsToColors.
Definition at line 552 of file vtkColorTransferFunction.h.
|
inlineoverrideprotectedvirtual |
Sets/Gets the range of scalars that will be mapped.
Reimplemented from vtkScalarsToColors.
Definition at line 553 of file vtkColorTransferFunction.h.
|
protected |
Internal method to sort the vector and update the Range whenever a node is added, edited or removed It always calls Modified().
|
protected |
Returns true if the range has been changed.
If the ranged has been modified, calls Modified().
|
protected |
Moves point from oldX to newX.
It removed the point from oldX. If any point existed at newX, it will also be removed.
|
protected |
Traverses the nodes to find the minimum distance.
Assumes nodes are sorted.
|
protected |
Definition at line 464 of file vtkColorTransferFunction.h.
|
protected |
Determines the function value outside of defined points Zero = always return 0.0 outside of defined points One = clamp to the lowest value below defined points and highest value above defined points.
Definition at line 472 of file vtkColorTransferFunction.h.
|
protected |
The color space in which interpolation is performed.
Definition at line 477 of file vtkColorTransferFunction.h.
|
protected |
Specify if HSV is wrap or not.
Definition at line 482 of file vtkColorTransferFunction.h.
|
protected |
The color interpolation scale (linear or logarithmic).
Definition at line 487 of file vtkColorTransferFunction.h.
|
protected |
The color to use for not-a-number.
Definition at line 492 of file vtkColorTransferFunction.h.
|
protected |
The opacity to use for not-a-number.
Definition at line 497 of file vtkColorTransferFunction.h.
|
protected |
The below-range color.
Definition at line 502 of file vtkColorTransferFunction.h.
|
protected |
Flag indicating whether below-range color should be used.
Definition at line 507 of file vtkColorTransferFunction.h.
|
protected |
The above-range color.
Definition at line 512 of file vtkColorTransferFunction.h.
|
protected |
Flag indicating whether below-range color should be used.
Definition at line 517 of file vtkColorTransferFunction.h.
|
protected |
Temporary array to store data from the nodes.
Definition at line 522 of file vtkColorTransferFunction.h.
|
protected |
The min and max node locations.
Definition at line 527 of file vtkColorTransferFunction.h.
|
protected |
Temporary storage for an evaluated color (0 to 255 RGBA A=255)
Definition at line 532 of file vtkColorTransferFunction.h.
|
protected |
If on, the same scalar value may have more than one node assigned to it.
Definition at line 537 of file vtkColorTransferFunction.h.
|
protected |
Definition at line 539 of file vtkColorTransferFunction.h.
|
protected |
Definition at line 540 of file vtkColorTransferFunction.h.
|
protected |
Temporary storage for the size of the table.
Set in the method GetTable() and queried in GetNumberOfAvailableColors().
Definition at line 546 of file vtkColorTransferFunction.h.