object to represent cell connectivity More...

#include <vtkCellArray.h>

Inheritance diagram for vtkCellArray:

Collaboration diagram for vtkCellArray:

Classes
struct	Storage

struct	VisitState

Public Types
using	ArrayType32 = vtkTypeInt32Array

using	ArrayType64 = vtkTypeInt64Array

using	StorageArrayList = vtkTypeList::Create< ArrayType32, ArrayType64 >
	List of possible array types used for storage. More...

using	InputArrayList = typename vtkTypeList::Unique< vtkTypeList::Create< vtkAOSDataArrayTemplate< int >, vtkAOSDataArrayTemplate< long >, vtkAOSDataArrayTemplate< long long > > >::Result
	List of possible ArrayTypes that are compatible with internal storage. More...

Public Member Functions
vtkTypeBool	Allocate (vtkIdType sz, vtkIdType vtkNotUsed(ext)=1000)
	Allocate memory. More...

bool	AllocateEstimate (vtkIdType numCells, vtkIdType maxCellSize)
	Pre-allocate memory in internal data structures. More...

bool	AllocateExact (vtkIdType numCells, vtkIdType connectivitySize)
	Pre-allocate memory in internal data structures. More...

bool	AllocateCopy (vtkCellArray *other)
	Pre-allocate memory in internal data structures to match the used size of the input vtkCellArray. More...

bool	ResizeExact (vtkIdType numCells, vtkIdType connectivitySize)
	ResizeExact() resizes the internal structures to hold numCells total cell offsets and connectivitySize total pointIds. More...

void	Initialize ()
	Free any memory and reset to an empty state. More...

void	Reset ()
	Reuse list. More...

void	Squeeze ()
	Reclaim any extra memory while preserving data. More...

bool	IsValid ()
	Check that internal storage is consistent and in a valid state. More...

vtkIdType	GetNumberOfCells () const
	Get the number of cells in the array. More...

vtkIdType	GetNumberOfOffsets () const
	Get the number of elements in the offsets array. More...

vtkIdType	GetNumberOfConnectivityIds () const
	Get the size of the connectivity array that stores the point ids. More...

vtkCellArrayIterator *	NewIterator ()
	NewIterator returns a new instance of vtkCellArrayIterator that is initialized to point at the first cell's data. More...

bool	SetData (vtkDataArray offsets, vtkDataArray connectivity)
	Sets the internal arrays to the supplied offsets and connectivity arrays. More...

bool	SetData (vtkIdType cellSize, vtkDataArray *connectivity)
	Sets the internal arrays to the supported connectivity array with an offsets array automatically generated given the fixed cells size. More...

bool	IsStorage64Bit () const

bool	IsStorageShareable () const

vtkIdType	IsHomogeneous ()
	Check if all cells have the same number of vertices. More...

void	InitTraversal ()

int	GetNextCell (vtkIdType &npts, vtkIdType const *&pts)

int	GetNextCell (vtkIdList *pts)

void	GetCellAtId (vtkIdType cellId, vtkIdType &cellSize, vtkIdType const *&cellPoints)
	Return the point ids for the cell at cellId. More...

void	GetCellAtId (vtkIdType cellId, vtkIdList *pts)
	Return the point ids for the cell at cellId. More...

vtkIdType	GetCellSize (const vtkIdType cellId) const
	Return the size of the cell at cellId. More...

vtkIdType	InsertNextCell (vtkCell *cell)
	Insert a cell object. More...

vtkIdType	InsertNextCell (vtkIdType npts, const vtkIdType *pts)
	Create a cell by specifying the number of points and an array of point id's. More...

vtkIdType	InsertNextCell (vtkIdList *pts)
	Create a cell by specifying a list of point ids. More...

vtkIdType	InsertNextCell (const std::initializer_list< vtkIdType > &cell)
	Overload that allows `InsertNextCell({0, 1, 2})` syntax. More...

vtkIdType	InsertNextCell (int npts)
	Create cells by specifying a count of total points to be inserted, and then adding points one at a time using method InsertCellPoint(). More...

void	InsertCellPoint (vtkIdType id)
	Used in conjunction with InsertNextCell(npts) to add another point to the list of cells. More...

void	UpdateCellCount (int npts)
	Used in conjunction with InsertNextCell(int npts) and InsertCellPoint() to update the number of points defining the cell. More...

void	ReverseCellAtId (vtkIdType cellId)
	Reverses the order of the point ids for the specified cell. More...

void	ReplaceCellAtId (vtkIdType cellId, const std::initializer_list< vtkIdType > &cell)
	Overload that allows `ReplaceCellAtId(cellId, {0, 1, 2})` syntax. More...

int	GetMaxCellSize ()
	Returns the size of the largest cell. More...

void	DeepCopy (vtkCellArray *ca)
	Perform a deep copy (no reference counting) of the given cell array. More...

void	ShallowCopy (vtkCellArray *ca)
	Shallow copy ca into this cell array. More...

void	Append (vtkCellArray *src, vtkIdType pointOffset=0)
	Append cells from src into this. More...

void	ExportLegacyFormat (vtkIdTypeArray *data)
	Fill data with the old-style vtkCellArray data layout, e.g. More...

unsigned long	GetActualMemorySize () const
	Return the memory in kibibytes (1024 bytes) consumed by this cell array. More...

virtual void	SetNumberOfCells (vtkIdType)
	Set the number of cells in the array. More...

vtkIdType	EstimateSize (vtkIdType numCells, int maxPtsPerCell)
	Utility routines help manage memory of cell array. More...

vtkIdType	GetSize ()
	Get the size of the allocated connectivity array. More...

vtkIdType	GetNumberOfConnectivityEntries ()
	Return the size of the array that would be returned from ExportLegacyFormat(). More...

void	GetCell (vtkIdType loc, vtkIdType &npts, const vtkIdType *&pts)
	Internal method used to retrieve a cell given a legacy offset location. More...

void	GetCell (vtkIdType loc, vtkIdList *pts)
	Internal method used to retrieve a cell given a legacy offset location. More...

vtkIdType	GetInsertLocation (int npts)
	Computes the current legacy insertion location within the internal array. More...

void	ReverseCell (vtkIdType loc)
	Special method inverts ordering of cell at the specified legacy location. More...

void	ReplaceCell (vtkIdType loc, int npts, const vtkIdType pts[])
	Replace the point ids of the cell at the legacy location with a different list of point ids. More...

void	SetCells (vtkIdType ncells, vtkIdTypeArray *cells)
	Define multiple cells by providing a connectivity list. More...

vtkIdTypeArray *	GetData ()
	Return the underlying data as a data array. More...


void	SetData (vtkTypeInt32Array offsets, vtkTypeInt32Array connectivity)
	Set the internal data arrays to the supplied offsets and connectivity arrays. More...

void	SetData (vtkTypeInt64Array offsets, vtkTypeInt64Array connectivity)
	Set the internal data arrays to the supplied offsets and connectivity arrays. More...

void	SetData (vtkIdTypeArray offsets, vtkIdTypeArray connectivity)
	Set the internal data arrays to the supplied offsets and connectivity arrays. More...

void	SetData (vtkAOSDataArrayTemplate< int > offsets, vtkAOSDataArrayTemplate< int > connectivity)
	Set the internal data arrays to the supplied offsets and connectivity arrays. More...

void	SetData (vtkAOSDataArrayTemplate< long > offsets, vtkAOSDataArrayTemplate< long > connectivity)
	Set the internal data arrays to the supplied offsets and connectivity arrays. More...

void	SetData (vtkAOSDataArrayTemplate< long long > offsets, vtkAOSDataArrayTemplate< long long > connectivity)
	Set the internal data arrays to the supplied offsets and connectivity arrays. More...


void	Use32BitStorage ()
	Initialize internal data structures to use 32- or 64-bit storage. More...

void	Use64BitStorage ()
	Initialize internal data structures to use 32- or 64-bit storage. More...

void	UseDefaultStorage ()
	Initialize internal data structures to use 32- or 64-bit storage. More...


bool	CanConvertTo32BitStorage () const
	Check if the existing data can safely be converted to use 32- or 64- bit storage. More...

bool	CanConvertTo64BitStorage () const
	Check if the existing data can safely be converted to use 32- or 64- bit storage. More...

bool	CanConvertToDefaultStorage () const
	Check if the existing data can safely be converted to use 32- or 64- bit storage. More...


bool	ConvertTo32BitStorage ()
	Convert internal data structures to use 32- or 64-bit storage. More...

bool	ConvertTo64BitStorage ()
	Convert internal data structures to use 32- or 64-bit storage. More...

bool	ConvertToDefaultStorage ()
	Convert internal data structures to use 32- or 64-bit storage. More...

bool	ConvertToSmallestStorage ()
	Convert internal data structures to use 32- or 64-bit storage. More...


vtkDataArray *	GetOffsetsArray ()
	Return the array used to store cell offsets. More...

ArrayType32 *	GetOffsetsArray32 ()
	Return the array used to store cell offsets. More...

ArrayType64 *	GetOffsetsArray64 ()
	Return the array used to store cell offsets. More...


vtkDataArray *	GetConnectivityArray ()
	Return the array used to store the point ids that define the cells' connectivity. More...

ArrayType32 *	GetConnectivityArray32 ()
	Return the array used to store the point ids that define the cells' connectivity. More...

ArrayType64 *	GetConnectivityArray64 ()
	Return the array used to store the point ids that define the cells' connectivity. More...


vtkIdType	GetTraversalCellId ()
	Get/Set the current cellId for traversal. More...

void	SetTraversalCellId (vtkIdType cellId)
	Get/Set the current cellId for traversal. More...


void	ReplaceCellAtId (vtkIdType cellId, vtkIdList *list)
	Replaces the point ids for the specified cell with the supplied list. More...

void	ReplaceCellAtId (vtkIdType cellId, vtkIdType cellSize, const vtkIdType *cellPoints)
	Replaces the point ids for the specified cell with the supplied list. More...


void	ImportLegacyFormat (vtkIdTypeArray *data)
	Import an array of data with the legacy vtkCellArray layout, e.g. More...

void	ImportLegacyFormat (const vtkIdType *data, vtkIdType len)
	Import an array of data with the legacy vtkCellArray layout, e.g. More...


void	AppendLegacyFormat (vtkIdTypeArray *data, vtkIdType ptOffset=0)
	Append an array of data with the legacy vtkCellArray layout, e.g. More...

void	AppendLegacyFormat (const vtkIdType *data, vtkIdType len, vtkIdType ptOffset=0)
	Append an array of data with the legacy vtkCellArray layout, e.g. More...


template<typename Functor , typename... Args, typename = typename std::enable_if<ReturnsVoid<Functor, Args...>::value>::type>
void	Visit (Functor &&functor, Args &&... args)

template<typename Functor , typename... Args, typename = typename std::enable_if<ReturnsVoid<Functor, Args...>::value>::type>
void	Visit (Functor &&functor, Args &&... args) const

template<typename Functor , typename... Args, typename = typename std::enable_if<!ReturnsVoid<Functor, Args...>::value>::type>
GetReturnType< Functor, Args... >	Visit (Functor &&functor, Args &&... args)

template<typename Functor , typename... Args, typename = typename std::enable_if<!ReturnsVoid<Functor, Args...>::value>::type>
GetReturnType< Functor, Args... >	Visit (Functor &&functor, Args &&... args) const


vtkIdType	GetTraversalLocation ()
	Get/Set the current traversal legacy location. More...

vtkIdType	GetTraversalLocation (vtkIdType npts)
	Get/Set the current traversal legacy location. More...

void	SetTraversalLocation (vtkIdType loc)
	Get/Set the current traversal legacy location. More...

Public Member Functions inherited from vtkObject
	vtkBaseTypeMacro (vtkObject, vtkObjectBase)

virtual void	DebugOn ()
	Turn debugging output on. More...

virtual void	DebugOff ()
	Turn debugging output off. More...

bool	GetDebug ()
	Get the value of the debug flag. More...

void	SetDebug (bool debugFlag)
	Set the value of the debug flag. More...

virtual void	Modified ()
	Update the modification time for this object. More...

virtual vtkMTimeType	GetMTime ()
	Return this object's modified time. More...

void	PrintSelf (ostream &os, vtkIndent indent) override
	Methods invoked by print to print information about the object including superclasses. More...

void	RemoveObserver (unsigned long tag)

void	RemoveObservers (unsigned long event)

void	RemoveObservers (const char *event)

void	RemoveAllObservers ()

vtkTypeBool	HasObserver (unsigned long event)

vtkTypeBool	HasObserver (const char *event)

int	InvokeEvent (unsigned long event)

int	InvokeEvent (const char *event)

unsigned long	AddObserver (unsigned long event, vtkCommand *, float priority=0.0f)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

unsigned long	AddObserver (const char event, vtkCommand , float priority=0.0f)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkCommand *	GetCommand (unsigned long tag)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObserver (vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObservers (unsigned long event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

void	RemoveObservers (const char event, vtkCommand )
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkTypeBool	HasObserver (unsigned long event, vtkCommand *)
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

vtkTypeBool	HasObserver (const char event, vtkCommand )
	Allow people to add/remove/invoke observers (callbacks) to any VTK object. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, void(T::*callback)(), float priority=0.0f)
	Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, void(T::callback)(vtkObject , unsigned long, void *), float priority=0.0f)
	Overloads to AddObserver that allow developers to add class member functions as callbacks for events. More...

template<class U , class T >
unsigned long	AddObserver (unsigned long event, U observer, bool(T::callback)(vtkObject , unsigned long, void *), float priority=0.0f)
	Allow user to set the AbortFlagOn() with the return value of the callback method. More...

int	InvokeEvent (unsigned long event, void *callData)
	This method invokes an event and return whether the event was aborted or not. More...

int	InvokeEvent (const char event, void callData)
	This method invokes an event and return whether the event was aborted or not. More...

Public Member Functions inherited from vtkObjectBase
const char *	GetClassName () const
	Return the class name as a string. More...

virtual vtkTypeBool	IsA (const char *name)
	Return 1 if this class is the same type of (or a subclass of) the named class. More...

virtual vtkIdType	GetNumberOfGenerationsFromBase (const char *name)
	Given the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More...

virtual void	Delete ()
	Delete a VTK object. More...

virtual void	FastDelete ()
	Delete a reference to this object. More...

void	InitializeObjectBase ()

void	Print (ostream &os)
	Print an object to an ostream. More...

virtual void	Register (vtkObjectBase *o)
	Increase the reference count (mark as used by another object). More...

virtual void	UnRegister (vtkObjectBase *o)
	Decrease the reference count (release by another object). More...

int	GetReferenceCount ()
	Return the current reference count of this object. More...

void	SetReferenceCount (int)
	Sets the reference count. More...

bool	GetIsInMemkind () const
	A local state flag that remembers whether this object lives in the normal or extended memory space. More...

virtual void	PrintHeader (ostream &os, vtkIndent indent)
	Methods invoked by print to print information about the object including superclasses. More...

virtual void	PrintTrailer (ostream &os, vtkIndent indent)
	Methods invoked by print to print information about the object including superclasses. More...

Protected Member Functions
	vtkCellArray ()

	~vtkCellArray () override

Protected Member Functions inherited from vtkObject
	vtkObject ()

	~vtkObject () override

void	RegisterInternal (vtkObjectBase *, vtkTypeBool check) override

void	UnRegisterInternal (vtkObjectBase *, vtkTypeBool check) override

void	InternalGrabFocus (vtkCommand mouseEvents, vtkCommand keypressEvents=nullptr)
	These methods allow a command to exclusively grab all events. More...

void	InternalReleaseFocus ()
	These methods allow a command to exclusively grab all events. More...

Protected Member Functions inherited from vtkObjectBase
	vtkObjectBase ()

virtual	~vtkObjectBase ()

virtual void	RegisterInternal (vtkObjectBase *, vtkTypeBool check)

virtual void	UnRegisterInternal (vtkObjectBase *, vtkTypeBool check)

virtual void	ReportReferences (vtkGarbageCollector *)

	vtkObjectBase (const vtkObjectBase &)

void	operator= (const vtkObjectBase &)

Protected Attributes
Storage	Storage

vtkNew< vtkIdList >	TempCell

vtkIdType	TraversalCellId { 0 }

vtkNew< vtkIdTypeArray >	LegacyData

Protected Attributes inherited from vtkObject
bool	Debug

vtkTimeStamp	MTime

vtkSubjectHelper *	SubjectHelper

Protected Attributes inherited from vtkObjectBase
std::atomic< int32_t >	ReferenceCount

vtkWeakPointerBase **	WeakPointers

Friends
class	vtkCellArrayIterator

typedef vtkObject	Superclass
	Standard methods for instantiation, type information, and printing. More...

static vtkCellArray *	New ()
	Standard methods for instantiation, type information, and printing. More...

static vtkTypeBool	IsTypeOf (const char *type)
	Standard methods for instantiation, type information, and printing. More...

static vtkCellArray *	SafeDownCast (vtkObjectBase *o)
	Standard methods for instantiation, type information, and printing. More...

virtual vtkTypeBool	IsA (const char *type)
	Standard methods for instantiation, type information, and printing. More...

vtkCellArray *	NewInstance () const
	Standard methods for instantiation, type information, and printing. More...

void	PrintSelf (ostream &os, vtkIndent indent) override
	Standard methods for instantiation, type information, and printing. More...

void	PrintDebug (ostream &os)
	Standard methods for instantiation, type information, and printing. More...

virtual vtkObjectBase *	NewInstanceInternal () const
	Standard methods for instantiation, type information, and printing. More...

Additional Inherited Members
Static Public Member Functions inherited from vtkObject
static vtkObject *	New ()
	Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...

static void	BreakOnError ()
	This method is called when vtkErrorMacro executes. More...

static void	SetGlobalWarningDisplay (int val)
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static void	GlobalWarningDisplayOn ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static void	GlobalWarningDisplayOff ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

static int	GetGlobalWarningDisplay ()
	This is a global flag that controls whether any debug, warning or error messages are displayed. More...

Static Public Member Functions inherited from vtkObjectBase
static vtkTypeBool	IsTypeOf (const char *name)
	Return 1 if this class type is the same type of (or a subclass of) the named class. More...

static vtkIdType	GetNumberOfGenerationsFromBaseType (const char *name)
	Given a the name of a base class of this class type, return the distance of inheritance between this class type and the named class (how many generations of inheritance are there between this class and the named class). More...

static vtkObjectBase *	New ()
	Create an object with Debug turned off, modified time initialized to zero, and reference counting on. More...

static void	SetMemkindDirectory (const char *directoryname)
	The name of a directory, ideally mounted -o dax, to memory map an extended memory space within. More...

static bool	GetUsingMemkind ()
	A global state flag that controls whether vtkObjects are constructed in the usual way (the default) or within the extended memory space. More...

Static Protected Member Functions inherited from vtkObjectBase
static vtkMallocingFunction	GetCurrentMallocFunction ()

static vtkReallocingFunction	GetCurrentReallocFunction ()

static vtkFreeingFunction	GetCurrentFreeFunction ()

static vtkFreeingFunction	GetAlternateFreeFunction ()

Detailed Description

object to represent cell connectivity

vtkCellArray stores dataset topologies as an explicit connectivity table listing the point ids that make up each cell.

Internally, the connectivity table is represented as two arrays: Offsets and Connectivity.

Offsets is an array of [numCells+1] values indicating the index in the Connectivity array where each cell's points start. The last value is always the length of the Connectivity array.

The Connectivity array stores the lists of point ids for each cell.

Thus, for a dataset consisting of 2 triangles, a quad, and a line, the internal arrays will appear as follows:

Topology:
---------
Cell 0: Triangle | point ids: {0, 1, 2}
Cell 1: Triangle | point ids: {5, 7, 2}
Cell 2: Quad     | point ids: {3, 4, 6, 7}
Cell 4: Line     | point ids: {5, 8}
 
vtkCellArray (current):
-----------------------
Offsets:      {0, 3, 6, 10, 12}
Connectivity: {0, 1, 2, 5, 7, 2, 3, 4, 6, 7, 5, 8}

While this class provides traversal methods (the legacy InitTraversal(), GetNextCell() methods, and the newer method GetCellAtId()) these are in general not thread-safe. Whenever possible it is preferrable to use a local thread-safe, vtkCellArrayIterator object, which can be obtained via:

auto iter = vtk::TakeSmartPointer(cellArray->NewIterator());
for (iter->GoToFirstCell(); !iter->IsDoneWithTraversal(); iter->GoToNextCell())
{
  // do work with iter
}

(Note however that depending on the type and structure of internal storage, a cell array iterator may be significantly slower than direct traversal over the cell array due to extra data copying. Factors of 3-4X are not uncommon. See vtkCellArrayIterator for more information. Also note that an iterator may become invalid if the internal vtkCellArray storage is modified.)

Other methods are also available for allocation and memory-related management; insertion of new cells into the vtkCellArray; and limited editing operations such as replacing one cell with a new cell of the same size.

The internal arrays may store either 32- or 64-bit values, though most of the API will prefer to use vtkIdType to refer to items in these arrays. This enables significant memory savings when vtkIdType is 64-bit, but 32 bits are sufficient to store all of the values in the connectivity table. Using 64-bit storage with a 32-bit vtkIdType is permitted, but values too large to fit in a 32-bit signed integer will be truncated when accessed through the API. (The particular internal storage type has implications on performance depending on vtkIdType. If the internal storage is equivalent to vtkIdType, then methods that return pointers to arrays of point ids can share the internal storage; otherwise a copy of internal memory must be performed.)

Methods for managing the storage type are:

bool IsStorage64Bit()
bool IsStorageShareable() // Can pointers to internal storage be shared
void Use32BitStorage()
void Use64BitStorage()
void UseDefaultStorage() // Depends on vtkIdType
bool CanConvertTo32BitStorage()
bool CanConvertTo64BitStorage()
bool CanConvertToDefaultStorage() // Depends on vtkIdType
bool ConvertTo32BitStorage()
bool ConvertTo64BitStorage()
bool ConvertToDefaultStorage() // Depends on vtkIdType
bool ConvertToSmallestStorage() // Depends on current values in arrays

Note that some legacy methods are still available that reflect the previous storage format of this data, which embedded the cell sizes into the Connectivity array:

vtkCellArray (legacy):
----------------------
Connectivity: {3, 0, 1, 2, 3, 5, 7, 2, 4, 3, 4, 6, 7, 2, 5, 8}
               |--Cell 0--||--Cell 1--||----Cell 2---||--C3-|

The methods require an external lookup table to allow random access, which was historically stored in the vtkCellTypes object. The following methods in vtkCellArray still support this style of indexing for compatibility purposes, but these are slow as they must perform some complex computations to convert the old "location" into the new "offset" and should be avoided. These methods (and their modern equivalents) are:

GetCell (Prefer GetCellAtId)
GetInsertLocation (Prefer GetNumberOfCells)
GetTraversalLocation (Prefer GetTraversalCellId, or better, NewIterator)
SetTraversalLocation (Prefer SetTraversalLocation, or better, NewIterator)
ReverseCell (Prefer ReverseCellAtId)
ReplaceCell (Prefer ReplaceCellAtId)
SetCells (Use ImportLegacyFormat, or SetData)
GetData (Use ExportLegacyFormat, or Get[Offsets|Connectivity]Array[|32|64])

Some other legacy methods were completely removed, such as GetPointer() / WritePointer(), since they are cannot be effectively emulated under the current design. If external code needs to support both the old and new version of the vtkCellArray API, the VTK_CELL_ARRAY_V2 preprocessor definition may be used to detect which API is being compiled against.

See also: vtkCellTypes vtkCellLinks

Online Examples:

PointLocatorFindPointsWithinRadiusDemo

Tetrahedron

WriteLegacyLinearCells

FindCellIntersections

Definition at line 289 of file vtkCellArray.h.

Member Typedef Documentation

◆ ArrayType32

using vtkCellArray::ArrayType32 = vtkTypeInt32Array

Definition at line 292 of file vtkCellArray.h.

◆ ArrayType64

using vtkCellArray::ArrayType64 = vtkTypeInt64Array

Definition at line 293 of file vtkCellArray.h.

◆ Superclass

typedef vtkObject vtkCellArray::Superclass

Standard methods for instantiation, type information, and printing.

Definition at line 301 of file vtkCellArray.h.

◆ StorageArrayList

using vtkCellArray::StorageArrayList = vtkTypeList::Create<ArrayType32, ArrayType64>

List of possible array types used for storage.

May be used with vtkArrayDispatch::Dispatch[2]ByArray to process internal arrays. Both the Connectivity and Offset arrays are guaranteed to have the same type.

See also: vtkCellArray::Visit() for a simpler mechanism.

Definition at line 314 of file vtkCellArray.h.

◆ InputArrayList

using vtkCellArray::InputArrayList = typename vtkTypeList::Unique<vtkTypeList::Create<vtkAOSDataArrayTemplate<int>, vtkAOSDataArrayTemplate<long>, vtkAOSDataArrayTemplate<long long> >>::Result

List of possible ArrayTypes that are compatible with internal storage.

Single component AOS-layout arrays holding one of these types may be passed to the method SetData to setup the cell array state.

This can be used with vtkArrayDispatch::DispatchByArray, etc to check input arrays before assigning them to a cell array.

Definition at line 324 of file vtkCellArray.h.

Constructor & Destructor Documentation

◆ vtkCellArray()

vtkCellArray::vtkCellArray ( )

protected

◆ ~vtkCellArray()

vtkCellArray::~vtkCellArray ( )

overrideprotected

Member Function Documentation

◆ New()

static vtkCellArray * vtkCellArray::New ( )

static

Standard methods for instantiation, type information, and printing.

◆ IsTypeOf()

static vtkTypeBool vtkCellArray::IsTypeOf ( const char * type )

static

Standard methods for instantiation, type information, and printing.

◆ IsA()

virtual vtkTypeBool vtkCellArray::IsA ( const char * type )

virtual

Standard methods for instantiation, type information, and printing.

Reimplemented from vtkObjectBase.

◆ SafeDownCast()

static vtkCellArray * vtkCellArray::SafeDownCast ( vtkObjectBase * o )

static

Standard methods for instantiation, type information, and printing.

◆ NewInstanceInternal()

virtual vtkObjectBase * vtkCellArray::NewInstanceInternal ( ) const

protectedvirtual

Standard methods for instantiation, type information, and printing.

◆ NewInstance()

vtkCellArray * vtkCellArray::NewInstance ( ) const

Standard methods for instantiation, type information, and printing.

◆ PrintSelf()

void vtkCellArray::PrintSelf	(	ostream &	os,
		vtkIndent	indent
	)

overridevirtual

Standard methods for instantiation, type information, and printing.

Reimplemented from vtkObject.

◆ PrintDebug()

void vtkCellArray::PrintDebug ( ostream & os )

Standard methods for instantiation, type information, and printing.

◆ Allocate()

vtkTypeBool vtkCellArray::Allocate	(	vtkIdType	sz,
		vtkIdType	vtkNotUsedext = `1000`
	)

inline

Allocate memory.

This currently allocates both the offsets and connectivity arrays to sz.

Note: It is preferrable to use AllocateEstimate(numCells, maxCellSize) or AllocateExact(numCells, connectivitySize) instead.

Definition at line 336 of file vtkCellArray.h.

◆ AllocateEstimate()

bool vtkCellArray::AllocateEstimate	(	vtkIdType	numCells,
		vtkIdType	maxCellSize
	)

inline

Pre-allocate memory in internal data structures.

Does not change the number of cells, only the array capacities. Existing data is NOT preserved.

Parameters

numCells	The number of expected cells in the dataset.
maxCellSize	The number of points per cell to allocate memory for.

Returns: True if allocation succeeds.

See also: Squeeze AllocateExact AllocateCopy

Definition at line 350 of file vtkCellArray.h.

◆ AllocateExact()

bool vtkCellArray::AllocateExact	(	vtkIdType	numCells,
		vtkIdType	connectivitySize
	)

Pre-allocate memory in internal data structures.

Does not change the number of cells, only the array capacities. Existing data is NOT preserved.

Parameters

numCells	The number of expected cells in the dataset.
connectivitySize	The total number of pointIds stored for all cells.

Returns: True if allocation succeeds.

See also: Squeeze AllocateEstimate AllocateCopy

◆ AllocateCopy()

bool vtkCellArray::AllocateCopy ( vtkCellArray * other )

inline

Pre-allocate memory in internal data structures to match the used size of the input vtkCellArray.

Does not change the number of cells, only the array capacities. Existing data is NOT preserved.

Parameters

other The vtkCellArray to use as a reference.

Returns: True if allocation succeeds.

See also: Squeeze AllocateEstimate AllocateExact

Definition at line 375 of file vtkCellArray.h.

◆ ResizeExact()

bool vtkCellArray::ResizeExact	(	vtkIdType	numCells,
		vtkIdType	connectivitySize
	)

ResizeExact() resizes the internal structures to hold numCells total cell offsets and connectivitySize total pointIds.

Old data is preserved, and newly-available memory is not initialized.

Warning: For advanced use only. You probably want an Allocate method.

Returns: True if allocation succeeds.

◆ Initialize()

void vtkCellArray::Initialize ( )

Free any memory and reset to an empty state.

◆ Reset()

void vtkCellArray::Reset ( )

inline

Reuse list.

Reset to initial state without freeing memory.

Definition at line 1702 of file vtkCellArray.h.

◆ Squeeze()

void vtkCellArray::Squeeze ( )

Reclaim any extra memory while preserving data.

See also: ConvertToSmallestStorage

◆ IsValid()

bool vtkCellArray::IsValid ( )

Check that internal storage is consistent and in a valid state.

Specifically, this function returns true if and only if:

The offset and connectivity arrays have exactly one component.
The offset array has at least one value and starts at 0.
The offset array values never decrease.
The connectivity array has as many entries as the last value in the offset array.

◆ GetNumberOfCells()

vtkIdType vtkCellArray::GetNumberOfCells ( ) const

inline

Get the number of cells in the array.

Definition at line 423 of file vtkCellArray.h.

◆ GetNumberOfOffsets()

vtkIdType vtkCellArray::GetNumberOfOffsets ( ) const

inline

Get the number of elements in the offsets array.

This will be the number of cells + 1.

Definition at line 439 of file vtkCellArray.h.

◆ GetNumberOfConnectivityIds()

vtkIdType vtkCellArray::GetNumberOfConnectivityIds ( ) const

inline

Get the size of the connectivity array that stores the point ids.

Note: Do not confuse this with the deprecated GetNumberOfConnectivityEntries(), which refers to the legacy memory layout.

Definition at line 457 of file vtkCellArray.h.

◆ NewIterator()

vtkCellArrayIterator * vtkCellArray::NewIterator ( )

NewIterator returns a new instance of vtkCellArrayIterator that is initialized to point at the first cell's data.

The caller is responsible for Delete()'ing the object.

◆ SetData() [1/8]

void vtkCellArray::SetData	(	vtkTypeInt32Array *	offsets,
		vtkTypeInt32Array *	connectivity
	)

Set the internal data arrays to the supplied offsets and connectivity arrays.

Note that the input arrays may be copied and not used directly. To avoid copying, use vtkIdTypeArray, vtkCellArray::ArrayType32, or vtkCellArray::ArrayType64.

◆ SetData() [2/8]

void vtkCellArray::SetData	(	vtkTypeInt64Array *	offsets,
		vtkTypeInt64Array *	connectivity
	)

Set the internal data arrays to the supplied offsets and connectivity arrays.

Note that the input arrays may be copied and not used directly. To avoid copying, use vtkIdTypeArray, vtkCellArray::ArrayType32, or vtkCellArray::ArrayType64.

◆ SetData() [3/8]

void vtkCellArray::SetData	(	vtkIdTypeArray *	offsets,
		vtkIdTypeArray *	connectivity
	)

Set the internal data arrays to the supplied offsets and connectivity arrays.

Note that the input arrays may be copied and not used directly. To avoid copying, use vtkIdTypeArray, vtkCellArray::ArrayType32, or vtkCellArray::ArrayType64.

◆ SetData() [4/8]

void vtkCellArray::SetData	(	vtkAOSDataArrayTemplate< int > *	offsets,
		vtkAOSDataArrayTemplate< int > *	connectivity
	)

Set the internal data arrays to the supplied offsets and connectivity arrays.

Note that the input arrays may be copied and not used directly. To avoid copying, use vtkIdTypeArray, vtkCellArray::ArrayType32, or vtkCellArray::ArrayType64.

◆ SetData() [5/8]

void vtkCellArray::SetData	(	vtkAOSDataArrayTemplate< long > *	offsets,
		vtkAOSDataArrayTemplate< long > *	connectivity
	)

Set the internal data arrays to the supplied offsets and connectivity arrays.

Note that the input arrays may be copied and not used directly. To avoid copying, use vtkIdTypeArray, vtkCellArray::ArrayType32, or vtkCellArray::ArrayType64.

◆ SetData() [6/8]

void vtkCellArray::SetData	(	vtkAOSDataArrayTemplate< long long > *	offsets,
		vtkAOSDataArrayTemplate< long long > *	connectivity
	)

Set the internal data arrays to the supplied offsets and connectivity arrays.

Note that the input arrays may be copied and not used directly. To avoid copying, use vtkIdTypeArray, vtkCellArray::ArrayType32, or vtkCellArray::ArrayType64.

◆ SetData() [7/8]

bool vtkCellArray::SetData	(	vtkDataArray *	offsets,
		vtkDataArray *	connectivity
	)

Sets the internal arrays to the supplied offsets and connectivity arrays.

This is a convenience method, and may fail if the following conditions are not met:

Both arrays must be of the same type.
The array type must be one of the types in InputArrayList.

If invalid arrays are passed in, an error is logged and the function will return false.

◆ SetData() [8/8]

bool vtkCellArray::SetData	(	vtkIdType	cellSize,
		vtkDataArray *	connectivity
	)

Sets the internal arrays to the supported connectivity array with an offsets array automatically generated given the fixed cells size.

This is a convenience method, and may fail if the following conditions are not met:

The connectivity array must be one of the types in InputArrayList.
The connectivity array size must be a multiple of cellSize.

If invalid arrays are passed in, an error is logged and the function will return false.

◆ IsStorage64Bit()

bool vtkCellArray::IsStorage64Bit ( ) const

inline

Returns: True if the internal storage is using 64 bit arrays. If false, the storage is using 32 bit arrays.

Definition at line 530 of file vtkCellArray.h.

◆ IsStorageShareable()

bool vtkCellArray::IsStorageShareable ( ) const

inline

Returns: True if the internal storage can be shared as a pointer to vtkIdType, i.e., the type and organization of internal storage is such that copying of data can be avoided, and instead a pointer to vtkIdType can be used.

Definition at line 538 of file vtkCellArray.h.

◆ Use32BitStorage()

void vtkCellArray::Use32BitStorage ( )

Initialize internal data structures to use 32- or 64-bit storage.

If selecting default storage, the storage depends on the VTK_USE_64BIT_IDS setting.

All existing data is erased.

◆ Use64BitStorage()

void vtkCellArray::Use64BitStorage ( )

Initialize internal data structures to use 32- or 64-bit storage.

If selecting default storage, the storage depends on the VTK_USE_64BIT_IDS setting.

All existing data is erased.

◆ UseDefaultStorage()

void vtkCellArray::UseDefaultStorage ( )

Initialize internal data structures to use 32- or 64-bit storage.

If selecting default storage, the storage depends on the VTK_USE_64BIT_IDS setting.

All existing data is erased.

◆ CanConvertTo32BitStorage()

bool vtkCellArray::CanConvertTo32BitStorage ( ) const

Check if the existing data can safely be converted to use 32- or 64- bit storage.

Ensures that all values can be converted to the target storage without truncating. If selecting default storage, the storage depends on the VTK_USE_64BIT_IDS setting.

◆ CanConvertTo64BitStorage()

bool vtkCellArray::CanConvertTo64BitStorage ( ) const

Check if the existing data can safely be converted to use 32- or 64- bit storage.

Ensures that all values can be converted to the target storage without truncating. If selecting default storage, the storage depends on the VTK_USE_64BIT_IDS setting.

◆ CanConvertToDefaultStorage()

bool vtkCellArray::CanConvertToDefaultStorage ( ) const

Check if the existing data can safely be converted to use 32- or 64- bit storage.

Ensures that all values can be converted to the target storage without truncating. If selecting default storage, the storage depends on the VTK_USE_64BIT_IDS setting.

◆ ConvertTo32BitStorage()

bool vtkCellArray::ConvertTo32BitStorage ( )

Convert internal data structures to use 32- or 64-bit storage.

If selecting default storage, the storage depends on the VTK_USE_64BIT_IDS setting.

If selecting smallest storage, the data is checked to see what the smallest safe storage for the existing data is, and then converts to it.

Existing data is preserved.

Returns: True on success, false on failure. If this algorithm fails, the cell array will be in an unspecified state.

◆ ConvertTo64BitStorage()

bool vtkCellArray::ConvertTo64BitStorage ( )

Convert internal data structures to use 32- or 64-bit storage.

If selecting default storage, the storage depends on the VTK_USE_64BIT_IDS setting.

If selecting smallest storage, the data is checked to see what the smallest safe storage for the existing data is, and then converts to it.

Existing data is preserved.

Returns: True on success, false on failure. If this algorithm fails, the cell array will be in an unspecified state.

◆ ConvertToDefaultStorage()

bool vtkCellArray::ConvertToDefaultStorage ( )

Convert internal data structures to use 32- or 64-bit storage.

If selecting default storage, the storage depends on the VTK_USE_64BIT_IDS setting.

If selecting smallest storage, the data is checked to see what the smallest safe storage for the existing data is, and then converts to it.

Existing data is preserved.

Returns: True on success, false on failure. If this algorithm fails, the cell array will be in an unspecified state.

◆ ConvertToSmallestStorage()

bool vtkCellArray::ConvertToSmallestStorage ( )

Convert internal data structures to use 32- or 64-bit storage.

If selecting default storage, the storage depends on the VTK_USE_64BIT_IDS setting.

If selecting smallest storage, the data is checked to see what the smallest safe storage for the existing data is, and then converts to it.

Existing data is preserved.

Returns: True on success, false on failure. If this algorithm fails, the cell array will be in an unspecified state.

◆ GetOffsetsArray()

vtkDataArray * vtkCellArray::GetOffsetsArray ( )

inline

Return the array used to store cell offsets.

The 32/64 variants are only valid when IsStorage64Bit() returns the appropriate value.

Definition at line 603 of file vtkCellArray.h.

◆ GetOffsetsArray32()

ArrayType32 * vtkCellArray::GetOffsetsArray32 ( )

inline

Return the array used to store cell offsets.

The 32/64 variants are only valid when IsStorage64Bit() returns the appropriate value.

Definition at line 614 of file vtkCellArray.h.

◆ GetOffsetsArray64()

ArrayType64 * vtkCellArray::GetOffsetsArray64 ( )

inline

Return the array used to store cell offsets.

The 32/64 variants are only valid when IsStorage64Bit() returns the appropriate value.

Definition at line 615 of file vtkCellArray.h.

◆ GetConnectivityArray()

vtkDataArray * vtkCellArray::GetConnectivityArray ( )

inline

Return the array used to store the point ids that define the cells' connectivity.

The 32/64 variants are only valid when IsStorage64Bit() returns the appropriate value.

Definition at line 624 of file vtkCellArray.h.

◆ GetConnectivityArray32()

ArrayType32 * vtkCellArray::GetConnectivityArray32 ( )

inline

Return the array used to store the point ids that define the cells' connectivity.

The 32/64 variants are only valid when IsStorage64Bit() returns the appropriate value.

Definition at line 635 of file vtkCellArray.h.

◆ GetConnectivityArray64()

ArrayType64 * vtkCellArray::GetConnectivityArray64 ( )

inline

Return the array used to store the point ids that define the cells' connectivity.

The 32/64 variants are only valid when IsStorage64Bit() returns the appropriate value.

Definition at line 636 of file vtkCellArray.h.

◆ IsHomogeneous()

vtkIdType vtkCellArray::IsHomogeneous ( )

Check if all cells have the same number of vertices.

The return value is coded as:

-1 = heterogeneous
0 = Cell array empty
n (positive integer) = homogeneous array of cell size n

◆ InitTraversal()

void vtkCellArray::InitTraversal ( )

inline

Warning: This method is not thread-safe. Consider using the NewIterator() iterator instead.

InitTraversal() initializes the traversal of the list of cells.

Note: This method is not thread-safe and has tricky syntax to use correctly. Prefer the use of vtkCellArrayIterator (see NewIterator()).

Definition at line 1600 of file vtkCellArray.h.

◆ GetNextCell() [1/2]

int vtkCellArray::GetNextCell	(	vtkIdType &	npts,
		vtkIdType const *&	pts
	)

inline

Warning: This method is not thread-safe. Consider using the NewIterator() iterator instead.

GetNextCell() gets the next cell in the list. If end of list is encountered, 0 is returned. A value of 1 is returned whenever npts and pts have been updated without error.

Do not modify the returned pts pointer, as it may point to shared memory.

Note: This method is not thread-safe and has tricky syntax to use correctly. Prefer the use of vtkCellArrayIterator (see NewIterator()).

Definition at line 1606 of file vtkCellArray.h.

◆ GetNextCell() [2/2]

int vtkCellArray::GetNextCell ( vtkIdList * pts )

inline

Warning: This method is not thread-safe. Consider using the NewIterator() iterator instead.

GetNextCell() gets the next cell in the list. If end of list is encountered, 0 is returned.

Note: This method is not thread-safe and has tricky syntax to use correctly. Prefer the use of vtkCellArrayIterator (see NewIterator()).

Definition at line 1621 of file vtkCellArray.h.

◆ GetCellAtId() [1/2]

void vtkCellArray::GetCellAtId	(	vtkIdType	cellId,
		vtkIdType &	cellSize,
		vtkIdType const *&	cellPoints
	)

inline

Return the point ids for the cell at cellId.

Warning: Subsequent calls to this method may invalidate previous call results if the internal storage type is not the same as vtkIdType and cannot be shared through the cellPoints pointer. In other words, the method may not be thread safe. Check if shareable (using IsStorageShareable()), or use a vtkCellArrayIterator to guarantee thread safety.

Definition at line 1640 of file vtkCellArray.h.

◆ GetCellAtId() [2/2]

void vtkCellArray::GetCellAtId	(	vtkIdType	cellId,
		vtkIdList *	pts
	)

inline

Return the point ids for the cell at cellId.

This always copies the cell ids (i.e., the list of points pts into the supplied vtkIdList). This method is thread safe.

Definition at line 1647 of file vtkCellArray.h.

◆ GetCellSize()

vtkIdType vtkCellArray::GetCellSize ( const vtkIdType cellId ) const

inline

Return the size of the cell at cellId.

Definition at line 1634 of file vtkCellArray.h.

◆ InsertNextCell() [1/5]

vtkIdType vtkCellArray::InsertNextCell ( vtkCell * cell )

inline

Insert a cell object.

Return the cell id of the cell.

Definition at line 1694 of file vtkCellArray.h.

◆ InsertNextCell() [2/5]

vtkIdType vtkCellArray::InsertNextCell	(	vtkIdType	npts,
		const vtkIdType *	pts
	)

inline

Create a cell by specifying the number of points and an array of point id's.

Return the cell id of the cell.

Definition at line 1653 of file vtkCellArray.h.

◆ InsertNextCell() [3/5]

vtkIdType vtkCellArray::InsertNextCell ( vtkIdList * pts )

inline

Create a cell by specifying a list of point ids.

Return the cell id of the cell.

Definition at line 1687 of file vtkCellArray.h.

◆ InsertNextCell() [4/5]

vtkIdType vtkCellArray::InsertNextCell ( const std::initializer_list< vtkIdType > & cell )

inline

Overload that allows InsertNextCell({0, 1, 2}) syntax.

Warning: This approach is useful for testing, but beware that trying to pass a single value (eg. InsertNextCell({3})) will call the InsertNextCell(int) overload instead.

Definition at line 738 of file vtkCellArray.h.

◆ InsertNextCell() [5/5]

vtkIdType vtkCellArray::InsertNextCell ( int npts )

inline

Create cells by specifying a count of total points to be inserted, and then adding points one at a time using method InsertCellPoint().

If you don't know the count initially, use the method UpdateCellCount() to complete the cell. Return the cell id of the cell.

Definition at line 1660 of file vtkCellArray.h.

◆ InsertCellPoint()

void vtkCellArray::InsertCellPoint ( vtkIdType id )

inline

Used in conjunction with InsertNextCell(npts) to add another point to the list of cells.

Definition at line 1666 of file vtkCellArray.h.

◆ UpdateCellCount()

void vtkCellArray::UpdateCellCount ( int npts )

inline

Used in conjunction with InsertNextCell(int npts) and InsertCellPoint() to update the number of points defining the cell.

Definition at line 1681 of file vtkCellArray.h.

◆ GetTraversalCellId()

vtkIdType vtkCellArray::GetTraversalCellId ( )

Get/Set the current cellId for traversal.

Note: This method is not thread-safe and has tricky syntax to use correctly. Prefer the use of vtkCellArrayIterator (see NewIterator()).

◆ SetTraversalCellId()

void vtkCellArray::SetTraversalCellId ( vtkIdType cellId )

Get/Set the current cellId for traversal.

Note: This method is not thread-safe and has tricky syntax to use correctly. Prefer the use of vtkCellArrayIterator (see NewIterator()).

◆ ReverseCellAtId()

void vtkCellArray::ReverseCellAtId ( vtkIdType cellId )

Reverses the order of the point ids for the specified cell.

◆ ReplaceCellAtId() [1/3]

void vtkCellArray::ReplaceCellAtId	(	vtkIdType	cellId,
		vtkIdList *	list
	)

Replaces the point ids for the specified cell with the supplied list.

Warning: This can ONLY replace the cell if the size does not change. Attempting to change cell size through this method will have undefined results.

◆ ReplaceCellAtId() [2/3]

void vtkCellArray::ReplaceCellAtId	(	vtkIdType	cellId,
		vtkIdType	cellSize,
		const vtkIdType *	cellPoints
	)

Replaces the point ids for the specified cell with the supplied list.

Warning: This can ONLY replace the cell if the size does not change. Attempting to change cell size through this method will have undefined results.

◆ ReplaceCellAtId() [3/3]

void vtkCellArray::ReplaceCellAtId	(	vtkIdType	cellId,
		const std::initializer_list< vtkIdType > &	cell
	)

inline

Overload that allows ReplaceCellAtId(cellId, {0, 1, 2}) syntax.

Warning: This can ONLY replace the cell if the size does not change. Attempting to change cell size through this method will have undefined results.

Definition at line 799 of file vtkCellArray.h.

◆ GetMaxCellSize()

int vtkCellArray::GetMaxCellSize ( )

Returns the size of the largest cell.

The size is the number of points defining the cell.

◆ DeepCopy()

void vtkCellArray::DeepCopy ( vtkCellArray * ca )

Perform a deep copy (no reference counting) of the given cell array.

◆ ShallowCopy()

void vtkCellArray::ShallowCopy ( vtkCellArray * ca )

Shallow copy ca into this cell array.

◆ Append()

void vtkCellArray::Append	(	vtkCellArray *	src,
		vtkIdType	pointOffset = `0`
	)

Append cells from src into this.

Point ids are offset by pointOffset.

◆ ExportLegacyFormat()

void vtkCellArray::ExportLegacyFormat ( vtkIdTypeArray * data )

Fill data with the old-style vtkCellArray data layout, e.g.

{ n0, p0_0, p0_1, ..., p0_n, n1, p1_0, p1_1, ..., p1_n, ... }

where n0 is the number of points in cell 0, and pX_Y is the Y'th point in cell X.

◆ ImportLegacyFormat() [1/2]

void vtkCellArray::ImportLegacyFormat ( vtkIdTypeArray * data )

Import an array of data with the legacy vtkCellArray layout, e.g.

:

{ n0, p0_0, p0_1, ..., p0_n, n1, p1_0, p1_1, ..., p1_n, ... }

where n0 is the number of points in cell 0, and pX_Y is the Y'th point in cell X.

◆ ImportLegacyFormat() [2/2]

void vtkCellArray::ImportLegacyFormat	(	const vtkIdType *	data,
		vtkIdType	len
	)

Import an array of data with the legacy vtkCellArray layout, e.g.

:

{ n0, p0_0, p0_1, ..., p0_n, n1, p1_0, p1_1, ..., p1_n, ... }

where n0 is the number of points in cell 0, and pX_Y is the Y'th point in cell X.

◆ AppendLegacyFormat() [1/2]

void vtkCellArray::AppendLegacyFormat	(	vtkIdTypeArray *	data,
		vtkIdType	ptOffset = `0`
	)

Append an array of data with the legacy vtkCellArray layout, e.g.

:

{ n0, p0_0, p0_1, ..., p0_n, n1, p1_0, p1_1, ..., p1_n, ... }

where n0 is the number of points in cell 0, and pX_Y is the Y'th point in cell X.

◆ AppendLegacyFormat() [2/2]

void vtkCellArray::AppendLegacyFormat	(	const vtkIdType *	data,
		vtkIdType	len,
		vtkIdType	ptOffset = `0`
	)

Append an array of data with the legacy vtkCellArray layout, e.g.

:

{ n0, p0_0, p0_1, ..., p0_n, n1, p1_0, p1_1, ..., p1_n, ... }

where n0 is the number of points in cell 0, and pX_Y is the Y'th point in cell X.

◆ GetActualMemorySize()

unsigned long vtkCellArray::GetActualMemorySize ( ) const

Return the memory in kibibytes (1024 bytes) consumed by this cell array.

Used to support streaming and reading/writing data. The value returned is guaranteed to be greater than or equal to the memory required to actually represent the data represented by this object. The information returned is valid only after the pipeline has been updated.

◆ Visit() [1/4]

template<typename Functor , typename... Args, typename = typename std::enable_if<ReturnsVoid<Functor, Args...>::value>::type>

void vtkCellArray::Visit	(	Functor &&	functor,
		Args &&...	args
	)

inline

Warning: Advanced use only.

The Visit methods allow efficient bulk modification of the vtkCellArray internal arrays by dispatching a functor with the current storage arrays. The simplest functor is of the form:

// Functor definition:
struct Worker
{
  template <typename CellStateT>
  void operator()(CellStateT &state)
  {
    // Do work on state object
  }
};
 
// Functor usage:
vtkCellArray *cellArray = ...;
cellArray->Visit(Worker{});

where state is an instance of the vtkCellArray::VisitState<ArrayT> class, instantiated for the current storage type of the cell array. See that class for usage details.

The functor may also:

Return a value from operator()
Pass additional arguments to operator()
Hold state.

A more advanced functor that does these things is shown below, along with its usage. This functor scans a range of cells and returns the largest cell's id:

struct FindLargestCellInRange
{
  template <typename CellStateT>
  vtkIdType operator()(CellStateT &state,
                       vtkIdType rangeBegin,
                       vtkIdType rangeEnd)
  {
    vtkIdType largest = rangeBegin;
    vtkIdType largestSize = state.GetCellSize(rangeBegin);
    ++rangeBegin;
    for (; rangeBegin < rangeEnd; ++rangeBegin)
    {
      const vtkIdType curSize = state.GetCellSize(rangeBegin);
      if (curSize > largestSize)
      {
        largest = rangeBegin;
        largestSize = curSize;
      }
    }
 
    return largest;
  }
};
 
// Usage:
// Scan cells in range [128, 1024) and return the id of the largest.
vtkCellArray cellArray = ...;
vtkIdType largest = cellArray->Visit(FindLargestCellInRange{},
                                     128, 1024);

Definition at line 1047 of file vtkCellArray.h.

◆ Visit() [2/4]

template<typename Functor , typename... Args, typename = typename std::enable_if<ReturnsVoid<Functor, Args...>::value>::type>

void vtkCellArray::Visit	(	Functor &&	functor,
		Args &&...	args
	)		const

inline

Warning: Advanced use only.

The Visit methods allow efficient bulk modification of the vtkCellArray internal arrays by dispatching a functor with the current storage arrays. The simplest functor is of the form:

// Functor definition:
struct Worker
{
  template <typename CellStateT>
  void operator()(CellStateT &state)
  {
    // Do work on state object
  }
};
 
// Functor usage:
vtkCellArray *cellArray = ...;
cellArray->Visit(Worker{});

where state is an instance of the vtkCellArray::VisitState<ArrayT> class, instantiated for the current storage type of the cell array. See that class for usage details.

The functor may also:

Return a value from operator()
Pass additional arguments to operator()
Hold state.

A more advanced functor that does these things is shown below, along with its usage. This functor scans a range of cells and returns the largest cell's id:

struct FindLargestCellInRange
{
  template <typename CellStateT>
  vtkIdType operator()(CellStateT &state,
                       vtkIdType rangeBegin,
                       vtkIdType rangeEnd)
  {
    vtkIdType largest = rangeBegin;
    vtkIdType largestSize = state.GetCellSize(rangeBegin);
    ++rangeBegin;
    for (; rangeBegin < rangeEnd; ++rangeBegin)
    {
      const vtkIdType curSize = state.GetCellSize(rangeBegin);
      if (curSize > largestSize)
      {
        largest = rangeBegin;
        largestSize = curSize;
      }
    }
 
    return largest;
  }
};
 
// Usage:
// Scan cells in range [128, 1024) and return the id of the largest.
vtkCellArray cellArray = ...;
vtkIdType largest = cellArray->Visit(FindLargestCellInRange{},
                                     128, 1024);

Definition at line 1067 of file vtkCellArray.h.

◆ Visit() [3/4]

template<typename Functor , typename... Args, typename = typename std::enable_if<!ReturnsVoid<Functor, Args...>::value>::type>

GetReturnType< Functor, Args... > vtkCellArray::Visit	(	Functor &&	functor,
		Args &&...	args
	)

inline

Warning: Advanced use only.

The Visit methods allow efficient bulk modification of the vtkCellArray internal arrays by dispatching a functor with the current storage arrays. The simplest functor is of the form:

// Functor definition:
struct Worker
{
  template <typename CellStateT>
  void operator()(CellStateT &state)
  {
    // Do work on state object
  }
};
 
// Functor usage:
vtkCellArray *cellArray = ...;
cellArray->Visit(Worker{});

where state is an instance of the vtkCellArray::VisitState<ArrayT> class, instantiated for the current storage type of the cell array. See that class for usage details.

The functor may also:

Return a value from operator()
Pass additional arguments to operator()
Hold state.

A more advanced functor that does these things is shown below, along with its usage. This functor scans a range of cells and returns the largest cell's id:

struct FindLargestCellInRange
{
  template <typename CellStateT>
  vtkIdType operator()(CellStateT &state,
                       vtkIdType rangeBegin,
                       vtkIdType rangeEnd)
  {
    vtkIdType largest = rangeBegin;
    vtkIdType largestSize = state.GetCellSize(rangeBegin);
    ++rangeBegin;
    for (; rangeBegin < rangeEnd; ++rangeBegin)
    {
      const vtkIdType curSize = state.GetCellSize(rangeBegin);
      if (curSize > largestSize)
      {
        largest = rangeBegin;
        largestSize = curSize;
      }
    }
 
    return largest;
  }
};
 
// Usage:
// Scan cells in range [128, 1024) and return the id of the largest.
vtkCellArray cellArray = ...;
vtkIdType largest = cellArray->Visit(FindLargestCellInRange{},
                                     128, 1024);

Definition at line 1087 of file vtkCellArray.h.

◆ Visit() [4/4]

template<typename Functor , typename... Args, typename = typename std::enable_if<!ReturnsVoid<Functor, Args...>::value>::type>

GetReturnType< Functor, Args... > vtkCellArray::Visit	(	Functor &&	functor,
		Args &&...	args
	)		const

inline

Warning: Advanced use only.

The Visit methods allow efficient bulk modification of the vtkCellArray internal arrays by dispatching a functor with the current storage arrays. The simplest functor is of the form:

// Functor definition:
struct Worker
{
  template <typename CellStateT>
  void operator()(CellStateT &state)
  {
    // Do work on state object
  }
};
 
// Functor usage:
vtkCellArray *cellArray = ...;
cellArray->Visit(Worker{});

where state is an instance of the vtkCellArray::VisitState<ArrayT> class, instantiated for the current storage type of the cell array. See that class for usage details.

The functor may also:

Return a value from operator()
Pass additional arguments to operator()
Hold state.

A more advanced functor that does these things is shown below, along with its usage. This functor scans a range of cells and returns the largest cell's id:

struct FindLargestCellInRange
{
  template <typename CellStateT>
  vtkIdType operator()(CellStateT &state,
                       vtkIdType rangeBegin,
                       vtkIdType rangeEnd)
  {
    vtkIdType largest = rangeBegin;
    vtkIdType largestSize = state.GetCellSize(rangeBegin);
    ++rangeBegin;
    for (; rangeBegin < rangeEnd; ++rangeBegin)
    {
      const vtkIdType curSize = state.GetCellSize(rangeBegin);
      if (curSize > largestSize)
      {
        largest = rangeBegin;
        largestSize = curSize;
      }
    }
 
    return largest;
  }
};
 
// Usage:
// Scan cells in range [128, 1024) and return the id of the largest.
vtkCellArray cellArray = ...;
vtkIdType largest = cellArray->Visit(FindLargestCellInRange{},
                                     128, 1024);

Definition at line 1106 of file vtkCellArray.h.

◆ SetNumberOfCells()

virtual void vtkCellArray::SetNumberOfCells ( vtkIdType )

virtual

Set the number of cells in the array.

DO NOT do any kind of allocation, advanced use only.

Note: This call has no effect.

◆ EstimateSize()

vtkIdType vtkCellArray::EstimateSize	(	vtkIdType	numCells,
		int	maxPtsPerCell
	)

Utility routines help manage memory of cell array.

EstimateSize() returns a value used to initialize and allocate memory for array based on number of cells and maximum number of points making up cell. If every cell is the same size (in terms of number of points), then the memory estimate is guaranteed exact. (If not exact, use Squeeze() to reclaim any extra memory.)

Note: This method was often misused (e.g. called alone and then discarding the result). Use AllocateEstimate directly instead.

◆ GetSize()

vtkIdType vtkCellArray::GetSize ( )

Get the size of the allocated connectivity array.

Warning: This returns the allocated capacity of the internal arrays as a number of elements, NOT the number of elements in use.

Note: Method incompatible with current internal storage.

◆ GetNumberOfConnectivityEntries()

vtkIdType vtkCellArray::GetNumberOfConnectivityEntries ( )

Return the size of the array that would be returned from ExportLegacyFormat().

Note: Method incompatible with current internal storage.

◆ GetCell() [1/2]

void vtkCellArray::GetCell	(	vtkIdType	loc,
		vtkIdType &	npts,
		const vtkIdType *&	pts
	)

Internal method used to retrieve a cell given a legacy offset location.

Warning: Subsequent calls to this method may invalidate previous call results.

Note: The location-based API is now a super-slow compatibility layer. Prefer GetCellAtId.

◆ GetCell() [2/2]

void vtkCellArray::GetCell	(	vtkIdType	loc,
		vtkIdList *	pts
	)

Internal method used to retrieve a cell given a legacy offset location.

Note: The location-based API is now a super-slow compatibility layer. Prefer GetCellAtId.

◆ GetInsertLocation()

vtkIdType vtkCellArray::GetInsertLocation ( int npts )

Computes the current legacy insertion location within the internal array.

Used in conjunction with GetCell(int loc,...).

Note: The location-based API is now a super-slow compatibility layer.

◆ GetTraversalLocation() [1/2]

vtkIdType vtkCellArray::GetTraversalLocation ( )

Get/Set the current traversal legacy location.

Note: The location-based API is now a super-slow compatibility layer. Prefer Get/SetTraversalCellId.

◆ GetTraversalLocation() [2/2]

vtkIdType vtkCellArray::GetTraversalLocation ( vtkIdType npts )

Get/Set the current traversal legacy location.

Note: The location-based API is now a super-slow compatibility layer. Prefer Get/SetTraversalCellId.

◆ SetTraversalLocation()

void vtkCellArray::SetTraversalLocation ( vtkIdType loc )

Get/Set the current traversal legacy location.

Note: The location-based API is now a super-slow compatibility layer. Prefer Get/SetTraversalCellId.

◆ ReverseCell()

void vtkCellArray::ReverseCell ( vtkIdType loc )

Special method inverts ordering of cell at the specified legacy location.

Must be called carefully or the cell topology may be corrupted.

Note: The location-based API is now a super-slow compatibility layer. Prefer ReverseCellAtId;

◆ ReplaceCell()

void vtkCellArray::ReplaceCell	(	vtkIdType	loc,
		int	npts,
		const vtkIdType	pts[]
	)

Replace the point ids of the cell at the legacy location with a different list of point ids.

Calling this method does not mark the vtkCellArray as modified. This is the responsibility of the caller and may be done after multiple calls to ReplaceCell. This call does not support changing the number of points in the cell – the caller must ensure that the target cell has npts points.

Note: The location-based API is now a super-slow compatibility layer. Prefer ReplaceCellAtId.

◆ SetCells()

void vtkCellArray::SetCells	(	vtkIdType	ncells,
		vtkIdTypeArray *	cells
	)

Define multiple cells by providing a connectivity list.

The list is in the form (npts,p0,p1,...p(npts-1), repeated for each cell). Be careful using this method because it discards the old cells, and anything referring these cells becomes invalid (for example, if BuildCells() has been called see vtkPolyData). The traversal location is reset to the beginning of the list; the insertion location is set to the end of the list.

Warning: The vtkCellArray will not hold a reference to cells. This function merely calls ImportLegacyFormat.

Note: Use ImportLegacyFormat or SetData instead.

◆ GetData()

vtkIdTypeArray * vtkCellArray::GetData ( )

Return the underlying data as a data array.

Warning: The returned array is not the actual internal representation used by vtkCellArray. Modifications to the returned array will not change the vtkCellArray's topology.

Note: Use ExportLegacyFormat, or GetOffsetsArray/GetConnectivityArray instead.

Friends And Related Function Documentation

◆ vtkCellArrayIterator

friend class vtkCellArrayIterator

friend

Definition at line 1264 of file vtkCellArray.h.

Member Data Documentation

◆ Storage

Storage vtkCellArray::Storage

protected

Definition at line 1410 of file vtkCellArray.h.

◆ TempCell

vtkNew<vtkIdList> vtkCellArray::TempCell

protected

Definition at line 1411 of file vtkCellArray.h.

◆ TraversalCellId

vtkIdType vtkCellArray::TraversalCellId { 0 }

protected

Definition at line 1412 of file vtkCellArray.h.

◆ LegacyData

vtkNew<vtkIdTypeArray> vtkCellArray::LegacyData

protected

Definition at line 1414 of file vtkCellArray.h.

The documentation for this class was generated from the following file:

Common/DataModel/vtkCellArray.h

Classes

Public Types

Public Member Functions

Protected Member Functions

Protected Attributes

Friends

Additional Inherited Members

Detailed Description

Member Typedef Documentation

◆ ArrayType32

◆ ArrayType64

◆ Superclass

◆ StorageArrayList

◆ InputArrayList

Constructor & Destructor Documentation

◆ vtkCellArray()

◆ ~vtkCellArray()

Member Function Documentation

◆ New()

◆ IsTypeOf()

◆ IsA()

◆ SafeDownCast()

◆ NewInstanceInternal()

◆ NewInstance()

◆ PrintSelf()

◆ PrintDebug()

◆ Allocate()

◆ AllocateEstimate()

◆ AllocateExact()

◆ AllocateCopy()

◆ ResizeExact()

◆ Initialize()

◆ Reset()

◆ Squeeze()

◆ IsValid()

◆ GetNumberOfCells()

◆ GetNumberOfOffsets()

◆ GetNumberOfConnectivityIds()

◆ NewIterator()

◆ SetData() [1/8]

◆ SetData() [2/8]

◆ SetData() [3/8]

◆ SetData() [4/8]

◆ SetData() [5/8]

◆ SetData() [6/8]

◆ SetData() [7/8]

◆ SetData() [8/8]

◆ IsStorage64Bit()

◆ IsStorageShareable()

◆ Use32BitStorage()

◆ Use64BitStorage()

◆ UseDefaultStorage()

◆ CanConvertTo32BitStorage()

◆ CanConvertTo64BitStorage()

◆ CanConvertToDefaultStorage()

◆ ConvertTo32BitStorage()

◆ ConvertTo64BitStorage()

◆ ConvertToDefaultStorage()

◆ ConvertToSmallestStorage()

◆ GetOffsetsArray()

◆ GetOffsetsArray32()

◆ GetOffsetsArray64()

◆ GetConnectivityArray()

◆ GetConnectivityArray32()

◆ GetConnectivityArray64()

◆ IsHomogeneous()

◆ InitTraversal()

◆ GetNextCell() [1/2]

◆ GetNextCell() [2/2]

◆ GetCellAtId() [1/2]

◆ GetCellAtId() [2/2]

◆ GetCellSize()

◆ InsertNextCell() [1/5]

◆ InsertNextCell() [2/5]

◆ InsertNextCell() [3/5]

◆ InsertNextCell() [4/5]

◆ InsertNextCell() [5/5]

◆ InsertCellPoint()

◆ UpdateCellCount()

◆ GetTraversalCellId()