Copyright © 2009, 2015 Thomas M. Eastep
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.2 or any later version published by the Free Software Foundation; with no Invariant Sections, with no Front-Cover, and with no Back-Cover Texts. A copy of the license is included in the section entitled “GNU Free Documentation License”.
2023/02/18
Table of Contents
- Introduction
- Network Topology
- Shorewall Configuration
- /etc/shorewall/mirrors
- /etc/shorewall/params
- /etc/shorewall/shorewall.conf
- /etc/shorewall/actions
- /etc/shorewall/action.Mirrors
- /etc/shorewall/action.tarpit
- /etc/shorewall/zones
- /etc/shorewall/interfaces
- /etc/shorewall/hosts
- /etc/shorewall/policy
- /etc/shorewall/accounting
- /etc/shorewall/blrules
- /etc/shorewall/findgw
- /etc/shorewall/isusable
- /etc/shorewall/lib.private
- /etc/shorewall/masq
- /etc/shorewall/conntrack
- /etc/shorewall/providers
- /etc/shorewall/proxyarp
- /etc/shorewall/restored
- /etc/shorewall/rtrules
- /etc/shorewall/stoppedrules
- /etc/shorewall/rules
- /etc/shorewall/started
- /etc/shorewall/stopped
- /etc/shorewall/tunnels
Caution
The ruleset shown in this article uses Shorewall features that are not available in Shorewall versions prior to 4.6.11
The configuration described in this article represents the network at shorewall.org during the summer of 2015. It uses the following Shorewall features:
A DMZ with three "systems" using Proxy ARP and running in Linux Containers (LXC)
Linux runs the firewall and the servers (although they run in LXC containers on the firewall system). Linux is not used natively on any of our other systems.. I rather run Windows natively (Windows 7 Professional) and run Linux in VMs under VirtualBox. This approach has a number of advantages:
Efficient disk utilization.
The virtual disks used by Linux are just files in the NTFS file system. There is no need to pre-allocate one or more partitions for use by Linux. Some large applications, like Google Earth, are installed only on Windows.
Avoids proprietary hardware issues.
The Linux VMs emulate standard hardware that is well-supported by Linux.
Avoids DRM hassles
All DRM-protected media can be handled under Windows.
VirtualBox is fast (when your processor supports virtualization extensions) and very easy to use. I highly recommend it!
Our network is diagrammed in the following graphic.
We have two accounts with Comcast:
ComcastC
This is a high-speed (40mb/8mb) link with a single dynamic IPv4 address. We are not allowed to run servers accessible through this account.
ComcastB
Comcast Business Class Service with a /29 (70.90.191.120/29).
The wired local network is restricted to my home office. The wireless network is managed by a wireless router which we use only as an access point -- its WAN interface is unused and it is configured to not do NAT. The wireless network uses WPA2 personal security.
This section contains excerpts from the Shorewall configuration.
MIRRORS=62.216.169.37,\ 62.216.184.105,\ 63.229.2.114,\ ...
Defines the IP addresses of the Shorewall mirror sites.
INCLUDE mirrors
LOG="NFLOG(0,0,1)"
INT_IF=eth0
TUN_IF=tun+
COMB_IF=eth2
COMC_IF=eth1
MYNET=70.90.191.120/29 #External IP addresses handled by this router
DMZ_NET=70.90.191.124/31
FW_NET=70.90.191.120/30
INT_NET=172.20.1.0/24
DYN_NET=$(find_first_interface_address_if_any $COMC_IF)
SMC_ADDR=10.1.10.11
[ -n "${DYN_NET:=67.170.122.219}" ]
DYN_NET=${DYN_NET}/32
DMZ=fw:$DMZ_NET
LISTS=:70.90.191.124
SERVER=:70.90.191.125
MAIL=172.20.1.200
PROXY=Yes
STATISTICAL=Yes
SQUID2=Yes
[ -n "${EXPERIMENTAL:=0}" ]
As shown, this file defines variables to hold the various lists of IP addresses that I need to maintain. To simplify network reconfiguration, I also use variables to define the log level and the network interfaces.
###############################################################################
# S T A R T U P E N A B L E D
###############################################################################
STARTUP_ENABLED=Yes
###############################################################################
# V E R B O S I T Y
###############################################################################
VERBOSITY=1
###############################################################################
# L O G G I N G
###############################################################################
BLACKLIST_LOG_LEVEL=none
INVALID_LOG_LEVEL=
LOG_BACKEND=ULOG
LOG_MARTIANS=Yes
LOG_VERBOSITY=1
LOGALLNEW=
LOGFILE=/var/log/ulogd/ulogd.syslogemu.log
LOGFORMAT=": %s %s"
LOGTAGONLY=Yes
LOGLIMIT="s:5/min"
MACLIST_LOG_LEVEL="$LOG"
RELATED_LOG_LEVEL="$LOG"
RPFILTER_LOG_LEVEL=info
SFILTER_LOG_LEVEL="$LOG"
SMURF_LOG_LEVEL="$LOG"
STARTUP_LOG=/var/log/shorewall-init.log
TCP_FLAGS_LOG_LEVEL="$LOG"
UNTRACKED_LOG_LEVEL=
###############################################################################
# L O C A T I O N O F F I L E S A N D D I R E C T O R I E S
###############################################################################
ARPTABLES=
CONFIG_PATH="/etc/shorewall:/etc/shorewall-common:/usr/share/shorewall:/usr/share/shorewall/Shorewall"
GEOIPDIR=/usr/share/xt_geoip/LE
IPTABLES=/sbin/iptables
IP=/sbin/ip
IPSET=
LOCKFILE=/var/lib/shorewall/lock
MODULESDIR=
NFACCT=
PATH="/usr/local/sbin:/sbin:/bin:/usr/sbin:/usr/bin:/usr/local/bin"
PERL=/usr/bin/perl
RESTOREFILE=
SHOREWALL_SHELL=/bin/bash
SUBSYSLOCK=
TC=
###############################################################################
# D E F A U L T A C T I O N S / M A C R O S
###############################################################################
ACCEPT_DEFAULT=none
DROP_DEFAULT=Drop
NFQUEUE_DEFAULT=none
QUEUE_DEFAULT=none
REJECT_DEFAULT=Reject
###############################################################################
# R S H / R C P C O M M A N D S
###############################################################################
RCP_COMMAND='scp ${files} ${root}@${system}:${destination}'
RSH_COMMAND='ssh ${root}@${system} ${command}'
###############################################################################
# F I R E W A L L O P T I O N S
###############################################################################
ACCOUNTING=Yes
ACCOUNTING_TABLE=mangle
ADD_IP_ALIASES=No
ADD_SNAT_ALIASES=No
ADMINISABSENTMINDED=Yes
BASIC_FILTERS=No
IGNOREUNKNOWNVARIABLES=No
AUTOCOMMENT=Yes
AUTOHELPERS=Yes
AUTOMAKE=Yes
BLACKLIST="NEW,INVALID,UNTRACKED"
CHAIN_SCRIPTS=No
CLAMPMSS=Yes
CLEAR_TC=Yes
COMPLETE=No
DEFER_DNS_RESOLUTION=No
DELETE_THEN_ADD=No
DETECT_DNAT_IPADDRS=No
DISABLE_IPV6=No
DONT_LOAD="nf_nat_sip,nf_conntrack_sip,nf_conntrack_h323,nf_nat_h323"
DYNAMIC_BLACKLIST=Yes
EXPAND_POLICIES=Yes
EXPORTMODULES=Yes
FASTACCEPT=Yes
FORWARD_CLEAR_MARK=Yes
HELPERS="ftp,irc"
IMPLICIT_CONTINUE=No
INLINE_MATCHES=Yes
IPSET_WARNINGS=No
IP_FORWARDING=Yes
KEEP_RT_TABLES=Yes
LEGACY_FASTSTART=Yes
LOAD_HELPERS_ONLY=Yes
MACLIST_TABLE=mangle
MACLIST_TTL=60
MANGLE_ENABLED=Yes
MAPOLDACTIONS=No
MARK_IN_FORWARD_CHAIN=No
MODULE_SUFFIX="ko ko.xz"
MULTICAST=No
MUTEX_TIMEOUT=60
NULL_ROUTE_RFC1918=unreachable
OPTIMIZE=All
OPTIMIZE_ACCOUNTING=No
REJECT_ACTION=RejectAct
REQUIRE_INTERFACE=No
RESTORE_DEFAULT_ROUTE=No
RESTORE_ROUTEMARKS=Yes
RETAIN_ALIASES=No
ROUTE_FILTER=No
SAVE_ARPTABLES=Yes
SAVE_IPSETS=ipv4
TC_ENABLED=No
TC_EXPERT=No
TC_PRIOMAP="2 3 3 3 2 3 1 1 2 2 2 2 2 2 2 2"
TRACK_PROVIDERS=Yes
TRACK_RULES=No
USE_DEFAULT_RT=Yes
USE_PHYSICAL_NAMES=Yes
USE_RT_NAMES=Yes
WARNOLDCAPVERSION=Yes
WORKAROUNDS=No
ZONE2ZONE=-
###############################################################################
# P A C K E T D I S P O S I T I O N
###############################################################################
BLACKLIST_DISPOSITION=DROP
INVALID_DISPOSITION=CONTINUE
MACLIST_DISPOSITION=ACCEPT
RELATED_DISPOSITION=REJECT
RPFILTER_DISPOSITION=DROP
SMURF_DISPOSITION=DROP
SFILTER_DISPOSITION=DROP
TCP_FLAGS_DISPOSITION=DROP
UNTRACKED_DISPOSITION=DROP
################################################################################
# P A C K E T M A R K L A Y O U T
################################################################################
TC_BITS=8
PROVIDER_BITS=2
PROVIDER_OFFSET=16
MASK_BITS=8
ZONE_BITS=0
################################################################################
# L E G A C Y O P T I O N
# D O N O T D E L E T E O R A L T E R
################################################################################
IPSECFILE=zonesI don't believe that there is anything remarkable there
Mirrors # Accept traffic from Shorewall Mirrors SSHLIMIT SSH_BL tarpit inline # Wrapper for TARPIT
#TARGET SOURCE DEST PROTO DPORT SPORT ORIGDEST RATE ?COMMENT Accept traffic from Mirrors ?FORMAT 2 DEFAULTS - $1 $MIRRORS
I make this into an action so the rather long list of rules go into their own chain. See the rules file -- this action is used for rsync traffic.
#ACTION SOURCE DEST PROTO DPORT SPORT ORIGDEST RATE USER MARK CONNLIMIT TIME HEADERS SWITCH HELPER
$LOG { rate=s:1/min }
TARPIT
#ZONE TYPE fw firewall loc ip #Local Zone net ipv4 #Internet dmz ipv4 #LXC Containers smc:net ip #10.0.1.0/24
#ZONE INTERFACE OPTIONS loc INT_IF dhcp,physical=$INT_IF,ignore=1,wait=5,routefilter,nets=172.20.1.0/24,routeback,tcpflags=0 net COMB_IF optional,sourceroute=0,routefilter=0,arp_ignore=1,proxyarp=0,physical=$COMB_IF,upnp,nosmurfs,tcpflags net COMC_IF optional,sourceroute=0,routefilter=0,arp_ignore=1,proxyarp=0,physical=$COMC_IF,upnp,nosmurfs,tcpflags,dhcp dmz br0 routeback,proxyarp=1,required,wait=30 - ifb0 ignore
#SOURCE DEST POLICY LOGLEVEL LIMIT $FW dmz REJECT $LOG $FW net REJECT $LOG ?else $FW dmz REJECT $LOG $FW net REJECT $LOG $FW all ACCEPT smc loc ACCEPT smc fw CONTINUE smc net NONE loc smc ACCEPT loc net ACCEPT loc fw REJECT $LOG net net NONE net smc NONE net all DROP:Drop $LOG 8/sec:30 dmz fw REJECT:Reject $LOG all all REJECT:Reject $LOG
#ACTION CHAIN SOURCE DESTINATION PROTO DPORT SPORT USER MARK IPSEC ?COMMENT ?SECTION PREROUTING ?SECTION INPUT ACCOUNT(fw-net,$FW_NET) - COMB_IF COUNT - COMB_IF - tcp - 80 COUNT - COMC_IF - tcp - 80 COUNT - br0:70.90.191.124 - tcp 80 = ?SECTION OUTPUT ACCOUNT(fw-net,$FW_NET) - - COMB_IF COUNT - - COMB_IF tcp 80 COUNT - - COMC_IF tcp 80 ?SECTION FORWARD ACCOUNT(dmz-net,$DMZ_NET) - br0 COMB_IF ACCOUNT(dmz-net,$DMZ_NET) - COMB_IF br0 ACCOUNT(loc-net,$INT_NET) - COMB_IF INT_IF ACCOUNT(loc-net,$INT_NET) - INT_IF COMB_IF
#ACTION SOURCE DEST PROTO DPORT SPORT ORIGDEST RATE USER MARK CONNLIMIT TIME HEADERS SWITCH WHITELIST net:70.90.191.126 all BLACKLIST net:+blacklist all BLACKLIST net all udp 1023:1033,1434,5948,23773 DROP net all tcp 57,1433,1434,2401,2745,3127,3306,3410,4899,5554,5948,6101,8081,9898,23773 DROP net:63.149.127.103 all DROP net:175.143.53.113 all DROP net:121.134.248.190 all REJECT net:188.176.145.22 dmz tcp 25 DROP net fw udp 111 Invalid(DROP) net all
if [ -f /var/lib/dhcpcd/dhcpcd-eth1.info ]; then . /var/lib/dhcpcd/dhcpcd-eth1.info echo $GATEWAY fi
The Comcast line has a dynamic IP address assigned with the help of dhclient.
local status
status=0
[ -f /etc/shorewall/${1}.status ] && status=$(cat /etc/shorewall/${1}.status)
return $statusFor use with lsm.
start_lsm() {
#
# Kill any existing lsm process(es)
#
killall lsm 2> /dev/null
#
# Create the Shorewall-specific part of the LSM configuration. This file is
# included by /etc/lsm/lsm.conf
#
# ComcastB has a static gateway while ComcastC's is dynamic
#
cat <<EOF > /etc/lsm/shorewall.conf
connection {
name=ComcastB
checkip=76.28.230.1
device=$COMB_IF
ttl=2
}
connection {
name=ComcastC
checkip=76.28.230.188
device=$COMC_IF
ttl=3
}
EOF
cat <<EOF > /var/lib/shorewall/eth0.info
ETH0_GATEWAY=$SW_ETH0_GATEWAY
ETH0_ADDRESS=$SW_ETH0_ADDRESS
EOF
#
# Clear status on start
#
if [ $COMMAND = start ]; then
for interface in eth0 eth1; do
echo 0 > ${VARDIR}/$interface.status
done
fi
#
# Run LSM -- by default, it forks into the background
#
/usr/local/sbin/lsm /etc/lsm/lsm.conf >> /var/log/lsm
}This function configures and starts lsm.
#INTERFACE SOURCE ADDRESS PROTO
?COMMENT Use the SMC's local net address when communicating with that net
COMB_IF:10.1.10.0/24 0.0.0.0/0 %{SMC_ADDR}
?COMMENT Masquerade Local Network
COMB_IF !70.90.191.120/29 70.90.191.121 ; -m statistic --mode random --probability 0.50
COMB_IF !70.90.191.120/29 70.90.191.123
COMC_IF 0.0.0.0/0
#INT_IF:172.20.1.15 172.20.1.0/24 172.20.1.254
br0 70.90.191.120/29 70.90.191.121 tcp 80
I split connections out of COMB_IF between the two IP addresses configured on the interface.
?FORMAT 2 #ACTION SOURCE DEST PROTO DPORT SPORT # DROP net - udp 3551 NOTRACK net - tcp 23 NOTRACK loc 172.20.1.255 udp NOTRACK loc 255.255.255.255 udp NOTRACK $FW 255.255.255.255 udp NOTRACK $FW 172.20.1.255 udp NOTRACK $FW 70.90.191.127 udp NOTRACK net:192.88.99.1 - NOTRACK $FW 192.88.99.1 ?if $AUTOHELPERS ?if __CT_TARGET && __AMANDA_HELPER CT:helper:amanda all - udp 10080 ?endif ?if __CT_TARGET && __FTP_HELPER CT:helper:ftp all - tcp 21 ?endif ?if __CT_TARGET && __H323_HELPER CT:helper:RAS all - udp 1719 CT:helper:Q.931 all - tcp 1720 ?endif ?if __CT_TARGET && __IRC_HELPER CT:helper:irc all - tcp 6667 ?endif ?if __CT_TARGET && __NETBIOS_NS_HELPER CT:helper:netbios-ns all - udp 137 ?endif ?if __CT_TARGET && __PPTP_HELPER CT:helper:pptp all - tcp 1729 ?endif ?if __CT_TARGET && __SANE_HELPER CT:helper:sane all - tcp 6566 ?endif #?if __CT_TARGET && __SIP_HELPER #CT:helper:sip all - udp 5060 #?endif ?if __CT_TARGET && __SNMP_HELPER CT:helper:snmp all - udp 161 ?endif ?if __CT_TARGET && __TFTP_HELPER CT:helper:tftp all - udp 69 ?endif ?endif
This file omits the 6to4 traffic originating from 6to4 relays as well as broadcast traffic (which Netfilter doesn't handle).
#NAME NUMBER MARK DUPLICATE INTERFACE GATEWAY OPTIONS COPY ?IF $STATISTICAL ComcastB 1 0x10000 - COMB_IF 70.90.191.126 loose,load=0.66666667,fallback ComcastC 2 0x20000 - COMC_IF detect loose,load=0.33333333 ?ELSE ComcastB 1 0x10000 - COMB_IF 70.90.191.126 nohostroute,loose,balance=2 ComcastC 2 0x20000 - COMC_IF detect nohostroute,loose,balance ?ENDIF ?IF $PROXY && ! $SQUID2 TProxy 3 - - lo - tproxy ?ENDIF root@gateway:/etc/shorewall#
See the Multi-ISP article for an explaination of the multi-ISP aspects of this configuration.
<empty>
As mentioned above, I set the proxyarp on the associated external interface instead of defining proxy ARP in this file.
if [ -z "$(ps ax | grep 'lsm ' | grep -v 'grep ' )" ]; then
start_lsm
fi
chmod 744 ${VARDIR}/stateIf lsm isn't running then start it. Make the state file world-readable.
#SOURCE DEST PROVIDER PRIORITY 70.90.191.121,\ 70.90.191.123 - ComcastB 1000 &COMC_IF - ComcastC 1000 br0 - ComcastB 11000 172.20.1.191 - ComcastB 1000
These entries simply ensure that outgoing traffic uses the correct interface.
#TARGET HOST(S) DEST PROTO DPORT SPORT ACCEPT INT_IF:172.20.1.0/24 $FW NOTRACK COMB_IF - 41 NOTRACK $FW COMB_IF 41 ACCEPT COMB_IF $FW 41 ACCEPT COMC_IF $FW udp 67:68
Keep the lights on while Shorewall is stopped.
################################################################################################################################################################################################
#ACTION SOURCE DEST PROTO DPORT SPORT ORIGDEST RATE USER MARK CONNLIMIT TIME HEADERS SWITCH
?if $VERSION < 40500
?SHELL echo " ERROR: Shorewall version is too low" >&2; exit 1
?endif
?begin perl
1;
?end perl
?SECTION ALL
#ACCEPT net:smc.shorewall.net $FW
#RST(LOG) all all
?SECTION ESTABLISHED
#SSH(REJECT) net loc:1.2.3.4 { time=timestart=18:48 }
?SECTION RELATED
ACCEPT all dmz:70.90.191.125 tcp 61001:62000 { helper=ftp }
ACCEPT dmz all tcp { helper=ftp }
ACCEPT all net tcp { helper=ftp }
ACCEPT all all icmp
RST(ACCEPT) all all tcp
ACCEPT dmz dmz
ACCEPT $FW all
?SECTION INVALID
DROP net all
?SECTION UNTRACKED
ACCEPT net:192.88.99.1 $FW 41
tarpit net all tcp 23
Broadcast(ACCEPT)\
all $FW
ACCEPT all $FW udp
CONTINUE loc $FW
CONTINUE $FW all
?SECTION NEW
DNSAmp(ACCEPT) loc fw
REJECT:$LOG loc net tcp 25 #Stop direct loc->net SMTP (Comcast uses submission).
REJECT:$LOG loc net udp 1025:1031 #MS Messaging
?COMMENT Stop NETBIOS crap
REJECT all net tcp 137,445
REJECT all net udp 137:139
?COMMENT Disallow port 333
REJECT all net tcp 3333
?COMMENT Stop Teredo
REJECT all net udp 3544
?COMMENT Stop my idiotic work laptop from sending to the net with an HP source IP address
{ action=DROP, source=loc:!172.20.0.0/22, dest=net } #
?COMMENT
#dropInvalid net all tcp
################################################################################################################################################################################################
# Local network to DMZ
#
DNAT loc dmz:70.90.191.125 tcp www - 70.90.191.123
ACCEPT loc dmz tcp ssh,smtp,465,548,587,www,ftp,imaps,https,5901:5903
ACCEPT loc dmz udp 3478:3479,33434:33524
################################################################################################################################################################################################
# SMC network to DMZ
#
ACCEPT smc dmz tcp ssh,smtp,465,587,www,ftp,imaps,https,5901:5903
ACCEPT smc dmz udp 33434:33524
################################################################################################################################################################################################
# SMC network to LOC
#
################################################################################################################################################################################################
# Local Network to Firewall
#
?IF $SQUID2
REDIRECT loc 3128 tcp 80 {origdest="!172.20.1.0/24,70.90.191.120/29,155.98.64.80,81.19.16.0/21,10.1.10.1"}
?ENDIF
ACCEPT loc fw udp 53,111,123,177,192,631,1024:
SMB(ACCEPT) loc fw
ACCEPT loc fw tcp 22,53,80,111,229,548,2049,3000,32765:61000
ACCEPT loc fw tcp 3128
mDNS(ACCEPT) loc fw
ACCEPT loc fw tcp 5001
ACCEPT loc:172.20.2.149 fw tcp 3551 #APCUPSD
################################################################################################################################################################################################
# SMC Network to Firewall
#
ACCEPT smc fw udp 53,111,123,177,192,631,1024:
SMB(ACCEPT) smc fw
ACCEPT smc fw tcp 22,53,111,548,2049,3000,3128,32765:32768,49152
mDNS(ACCEPT) smc fw
################################################################################################################################################################################################
# SMC Network to multiple destinations
#
Ping(ACCEPT) smc dmz,fw
################################################################################################################################################################################################
# Local Network to Internet
#REJECT:info loc net tcp 80,443
################################################################################################################################################################################################
# Local Network to multiple destinations
#
Ping(ACCEPT) loc dmz,fw
################################################################################################################################################################################################
# Internet to ALL -- drop NewNotSyn packets
#
dropNotSyn net fw,loc,smc tcp
AutoBL(SSH,60,-,-,-,-,$LOG)\
net all tcp 22
################################################################################################################################################################################################
# Internet to DMZ
#
ACCEPT net dmz udp 33434:33454
ACCEPT net dmz tcp 25 - - smtp:2/min:4,mail:60/min:100
DNAT- net 70.90.191.125 tcp https - 70.90.191.123
DNAT- net 70.90.191.125 tcp http - 70.90.191.123
DNAT- all 172.20.2.44 tcp ssh - 70.90.191.123
ACCEPT net dmz:70.90.191.122 tcp https,imaps
ACCEPT net dmz:70.90.191.124 tcp http,https,465,587,imaps
ACCEPT net dmz:70.90.191.125 tcp http,ftp
Mirrors(ACCEPT:none)\ #Continuation test
net dmz tcp 873
Ping(ACCEPT) net dmz
DROP net dmz tcp http,https
################################################################################################################################################################################################
#
# UPnP
#
ACCEPT loc fw udp 1900
forwardUPnP net loc
#
# Silently Handle common probes
#
REJECT net loc tcp www,ftp,https
DROP net loc icmp 8
################################################################################################################################################################################################
# DMZ to DMZ
#
################################################################################################################################################################################################
DNAT dmz dmz:70.90.191.125:80 tcp 80 - 70.90.191.121
# DMZ to Internet
#
ACCEPT dmz net udp ntp,domain
ACCEPT dmz net tcp domain,echo,ftp,ssh,smtp,whois,www,81,nntp,https,993,465,587,2401,2702,2703,5901,8080,9418,11371
#
# Some FTP clients seem prone to sending the PORT command split over two packets. This prevents the FTP connection tracking
# code from processing the command and setting up the proper expectation
# The following rule allows active FTP to work in these cases
# but logs the connection so I can keep an eye on this potential security hole.
#
ACCEPT:$LOG dmz net tcp 1024: 20
Ping(ACCEPT) dmz all
################################################################################################################################################################################################
# DMZ to fw
#
DNS(ACCEPT) dmz $FW
HTTP(ACCEPT) dmz $FW
Ping(ACCEPT) dmz $FW
################################################################################################################################################################################################
# Internet to Firewall
#
REJECT net fw tcp www,ftp,https
ACCEPT net fw udp 3478:3479,33434:33454
ACCEPT net fw tcp 22 - - s:ssh:1/min:3
ACCEPT net fw tcp 51413
?COMMENT IPv6 tunnel ping
ACCEPT net fw:70.90.191.121,70.90.191.122/31\
icmp 8
ACCEPT net:COMC_IF fw icmp 8
?COMMENT
################################################################################################################################################################################################
# Firewall to DMZ
#
ACCEPT fw dmz tcp www,ftp,ssh,smtp,https,465,587,993,3128,5901
REJECT fw dmz udp 137:139
Ping(ACCEPT) fw dmz
################################################################################################################################################################################################
# Firewall to NET
#
DNS(ACCEPT) fw net
NTP(ACCEPT) fw net
DNAT- fw 172.20.1.254:3128 tcp 80 - - - !:proxy
ACCEPT+ fw net tcp 43,80,443,3466 - - - -
ACCEPT fw net tcp 3128 - - - !:proxy
FTP(ACCEPT) fw net - - - - - proxy
Git(ACCEPT) fw net - - - - - teastep
ACCEPT fw net tcp 22
NNTP(ACCEPT) fw net
Ping(ACCEPT) fw net
ACCEPT fw net udp 33434:33524
#ACCEPT:info fw net - - - - - root
ACCEPT fw net tcp 25,143,993 - - - teastep
################################################################################################################################################################################################
#
?COMMENT Freenode Probes
DROP net:\
82.96.96.3,\
85.190.0.3 any!loc,smc
?COMMENT
################################################################################################################################################################################################
if [ "$COMMAND" = start -o -z "$(ps ax | grep 'lsm ' | grep -v 'grep ' )" ]; then
start_lsm
fi
If lsm isn't running then start it.
if [ "$COMMAND" = stop -o "$COMMAND" = clear ]; then
killall lsm 2> /dev/null
fi
chmod 744 ${VARDIR}/stateKill lsm if the command is stop or clear. Make the state file world-readable.