QCameraExposure Class
The QCameraExposure class provides interface for exposure related camera settings. More...
Header: | #include <QCameraExposure> |
qmake: | QT += multimedia |
Inherits: | QObject |
Public Types
enum | ExposureMode { ExposureAuto, ExposureManual, ExposurePortrait, ExposureNight, ExposureBacklight, …, ExposureModeVendor } |
enum | FlashMode { FlashAuto, FlashOff, FlashOn, FlashRedEyeReduction, FlashFill, …, FlashManual } |
flags | FlashModes |
enum | MeteringMode { MeteringMatrix, MeteringAverage, MeteringSpot } |
Properties
|
|
Public Functions
qreal | aperture() const |
qreal | exposureCompensation() const |
QCameraExposure::ExposureMode | exposureMode() const |
QCameraExposure::FlashModes | flashMode() const |
bool | isAvailable() const |
bool | isExposureModeSupported(QCameraExposure::ExposureMode mode) const |
bool | isFlashModeSupported(QCameraExposure::FlashModes mode) const |
bool | isFlashReady() const |
bool | isMeteringModeSupported(QCameraExposure::MeteringMode mode) const |
int | isoSensitivity() const |
QCameraExposure::MeteringMode | meteringMode() const |
qreal | requestedAperture() const |
int | requestedIsoSensitivity() const |
qreal | requestedShutterSpeed() const |
void | setSpotMeteringPoint(const QPointF &point) |
qreal | shutterSpeed() const |
QPointF | spotMeteringPoint() const |
QList<qreal> | supportedApertures(bool *continuous = nullptr) const |
QList<int> | supportedIsoSensitivities(bool *continuous = nullptr) const |
QList<qreal> | supportedShutterSpeeds(bool *continuous = nullptr) const |
Public Slots
void | setAutoAperture() |
void | setAutoIsoSensitivity() |
void | setAutoShutterSpeed() |
void | setExposureCompensation(qreal ev) |
void | setExposureMode(QCameraExposure::ExposureMode mode) |
void | setFlashMode(QCameraExposure::FlashModes mode) |
void | setManualAperture(qreal aperture) |
void | setManualIsoSensitivity(int iso) |
void | setManualShutterSpeed(qreal seconds) |
void | setMeteringMode(QCameraExposure::MeteringMode mode) |
Signals
void | apertureChanged(qreal value) |
void | apertureRangeChanged() |
void | exposureCompensationChanged(qreal value) |
void | flashReady(bool ready) |
void | isoSensitivityChanged(int value) |
void | shutterSpeedChanged(qreal speed) |
void | shutterSpeedRangeChanged() |
Protected Functions
virtual | ~QCameraExposure() |
Detailed Description
Member Type Documentation
enum QCameraExposure::ExposureMode
Constant | Value | Description |
---|---|---|
QCameraExposure::ExposureAuto | 0 | Automatic mode. |
QCameraExposure::ExposureManual | 1 | Manual mode. |
QCameraExposure::ExposurePortrait | 2 | Portrait exposure mode. |
QCameraExposure::ExposureNight | 3 | Night mode. |
QCameraExposure::ExposureBacklight | 4 | Backlight exposure mode. |
QCameraExposure::ExposureSpotlight | 5 | Spotlight exposure mode. |
QCameraExposure::ExposureSports | 6 | Spots exposure mode. |
QCameraExposure::ExposureSnow | 7 | Snow exposure mode. |
QCameraExposure::ExposureBeach | 8 | Beach exposure mode. |
QCameraExposure::ExposureLargeAperture | 9 | Use larger aperture with small depth of field. |
QCameraExposure::ExposureSmallAperture | 10 | Use smaller aperture. |
QCameraExposure::ExposureAction | 11 | Action mode. Since 5.5 |
QCameraExposure::ExposureLandscape | 12 | Landscape mode. Since 5.5 |
QCameraExposure::ExposureNightPortrait | 13 | Night portrait mode. Since 5.5 |
QCameraExposure::ExposureTheatre | 14 | Theatre mode. Since 5.5 |
QCameraExposure::ExposureSunset | 15 | Sunset mode. Since 5.5 |
QCameraExposure::ExposureSteadyPhoto | 16 | Steady photo mode. Since 5.5 |
QCameraExposure::ExposureFireworks | 17 | Fireworks mode. Since 5.5 |
QCameraExposure::ExposureParty | 18 | Party mode. Since 5.5 |
QCameraExposure::ExposureCandlelight | 19 | Candlelight mode. Since 5.5 |
QCameraExposure::ExposureBarcode | 20 | Barcode mode. Since 5.5 |
QCameraExposure::ExposureModeVendor | 1000 | The base value for device specific exposure modes. |
enum QCameraExposure::FlashMode
flags QCameraExposure::FlashModes
Constant | Value | Description |
---|---|---|
QCameraExposure::FlashAuto | 0x1 | Automatic flash. |
QCameraExposure::FlashOff | 0x2 | Flash is Off. |
QCameraExposure::FlashOn | 0x4 | Flash is On. |
QCameraExposure::FlashRedEyeReduction | 0x8 | Red eye reduction flash. |
QCameraExposure::FlashFill | 0x10 | Use flash to fillin shadows. |
QCameraExposure::FlashTorch | 0x20 | Constant light source. If supported, torch can be enabled without loading the camera. |
QCameraExposure::FlashVideoLight | 0x40 | Constant light source, useful for video capture. The light is turned on only while camera is active. |
QCameraExposure::FlashSlowSyncFrontCurtain | 0x80 | Use the flash in conjunction with a slow shutter speed. This mode allows better exposure of distant objects and/or motion blur effect. |
QCameraExposure::FlashSlowSyncRearCurtain | 0x100 | The similar mode to FlashSlowSyncFrontCurtain but flash is fired at the end of exposure. |
QCameraExposure::FlashManual | 0x200 | Flash power is manualy set. |
The FlashModes type is a typedef for QFlags<FlashMode>. It stores an OR combination of FlashMode values.
enum QCameraExposure::MeteringMode
Constant | Value | Description |
---|---|---|
QCameraExposure::MeteringMatrix | 1 | Matrix metering mode. |
QCameraExposure::MeteringAverage | 2 | Center weighted average metering mode. |
QCameraExposure::MeteringSpot | 3 | Spot metering mode. |
Property Documentation
aperture : const qreal
Lens aperture is specified as an F number, the ratio of the focal length to effective aperture diameter.
Access functions:
qreal | aperture() const |
Notifier signal:
void | apertureChanged(qreal value) |
See also supportedApertures(), setAutoAperture(), setManualAperture(), and requestedAperture().
exposureCompensation : qreal
Exposure compensation in EV units.
Exposure compensation property allows to adjust the automatically calculated exposure.
Access functions:
qreal | exposureCompensation() const |
void | setExposureCompensation(qreal ev) |
Notifier signal:
void | exposureCompensationChanged(qreal value) |
exposureMode : QCameraExposure::ExposureMode
This property holds the exposure mode being used.
Access functions:
QCameraExposure::ExposureMode | exposureMode() const |
void | setExposureMode(QCameraExposure::ExposureMode mode) |
See also QCameraExposure::isExposureModeSupported().
flashMode : QCameraExposure::FlashModes
This property holds the flash mode being used.
Usually the single QCameraExposure::FlashMode flag is used, but some non conflicting flags combination are also allowed, like QCameraExposure::FlashManual | QCameraExposure::FlashSlowSyncRearCurtain.
Access functions:
QCameraExposure::FlashModes | flashMode() const |
void | setFlashMode(QCameraExposure::FlashModes mode) |
See also QCameraExposure::isFlashModeSupported() and QCameraExposure::isFlashReady().
flashReady : const bool
Indicates if the flash is charged and ready to use.
Access functions:
bool | isFlashReady() const |
Notifier signal:
void | flashReady(bool ready) |
isoSensitivity : const int
This property holds the sensor ISO sensitivity.
Access functions:
int | isoSensitivity() const |
Notifier signal:
void | isoSensitivityChanged(int value) |
See also supportedIsoSensitivities(), setAutoIsoSensitivity(), and setManualIsoSensitivity().
meteringMode : QCameraExposure::MeteringMode
This property holds the metering mode being used.
Access functions:
QCameraExposure::MeteringMode | meteringMode() const |
void | setMeteringMode(QCameraExposure::MeteringMode mode) |
See also QCameraExposure::isMeteringModeSupported().
shutterSpeed : const qreal
Camera's shutter speed in seconds.
Access functions:
qreal | shutterSpeed() const |
Notifier signal:
void | shutterSpeedChanged(qreal speed) |
See also supportedShutterSpeeds(), setAutoShutterSpeed(), and setManualShutterSpeed().
Member Function Documentation
[signal]
void QCameraExposure::apertureChanged(qreal value)
Signal emitted when aperature changes to value.
Note: Notifier signal for property aperture.
[signal]
void QCameraExposure::apertureRangeChanged()
Signal emitted when aperature range has changed.
[signal]
void QCameraExposure::exposureCompensationChanged(qreal value)
Signal emitted when the exposure compensation changes to value.
Note: Notifier signal for property exposureCompensation.
[signal]
void QCameraExposure::flashReady(bool ready)
Signal the flash ready status has changed.
Note: Notifier signal for property flashReady.
[signal]
void QCameraExposure::isoSensitivityChanged(int value)
Signal emitted when sensitivity changes to value.
Note: Notifier signal for property isoSensitivity.
[slot]
void QCameraExposure::setAutoAperture()
Turn on auto aperture
[slot]
void QCameraExposure::setAutoIsoSensitivity()
Turn on auto sensitivity
[slot]
void QCameraExposure::setAutoShutterSpeed()
Turn on auto shutter speed
[slot]
void QCameraExposure::setManualAperture(qreal aperture)
Sets the manual camera aperture value.
[slot]
void QCameraExposure::setManualIsoSensitivity(int iso)
Sets the manual sensitivity to iso
[slot]
void QCameraExposure::setManualShutterSpeed(qreal seconds)
Set the manual shutter speed to seconds
[signal]
void QCameraExposure::shutterSpeedChanged(qreal speed)
Signals that a camera's shutter speed has changed.
Note: Notifier signal for property shutterSpeed.
[signal]
void QCameraExposure::shutterSpeedRangeChanged()
Signal emitted when the shutter speed range has changed.
[virtual protected]
QCameraExposure::~QCameraExposure()
Destroys the camera exposure object.
bool QCameraExposure::isAvailable() const
Returns true if exposure settings are supported by this camera.
bool QCameraExposure::isExposureModeSupported(QCameraExposure::ExposureMode mode) const
Returns true if the exposure mode is supported.
bool QCameraExposure::isFlashModeSupported(QCameraExposure::FlashModes mode) const
Returns true if the flash mode is supported.
bool QCameraExposure::isFlashReady() const
Returns true if flash is charged.
Note: Getter function for property flashReady.
bool QCameraExposure::isMeteringModeSupported(QCameraExposure::MeteringMode mode) const
Returns true if the metering mode is supported.
qreal QCameraExposure::requestedAperture() const
Returns the requested manual aperture or -1.0 if automatic aperture is turned on.
int QCameraExposure::requestedIsoSensitivity() const
Returns the requested ISO sensitivity or -1 if automatic ISO is turned on.
qreal QCameraExposure::requestedShutterSpeed() const
Returns the requested manual shutter speed in seconds or -1.0 if automatic shutter speed is turned on.
void QCameraExposure::setSpotMeteringPoint(const QPointF &point)
Allows setting the spot metering point to point.
See also spotMeteringPoint().
qreal QCameraExposure::shutterSpeed() const
Returns the current shutter speed in seconds.
Note: Getter function for property shutterSpeed.
QPointF QCameraExposure::spotMeteringPoint() const
When supported, the spot metering point is the (normalized) position of the point of the image where exposure metering will be performed. This is typically used to indicate an "interesting" area of the image that should be exposed properly.
The coordinates are relative frame coordinates: QPointF(0,0) points to the left top frame point, QPointF(0.5,0.5) points to the frame center, which is typically the default spot metering point.
The spot metering point is only used with spot metering mode.
See also setSpotMeteringPoint().
QList<qreal> QCameraExposure::supportedApertures(bool *continuous = nullptr) const
Returns the list of aperture values camera supports. The apertures list can change depending on the focal length, in such a case the apertureRangeChanged() signal is emitted.
If the camera supports arbitrary aperture values within the supported range, *continuous is set to true, otherwise *continuous is set to false.
QList<int> QCameraExposure::supportedIsoSensitivities(bool *continuous = nullptr) const
Returns the list of ISO senitivities camera supports.
If the camera supports arbitrary ISO sensitivities within the supported range, *continuous is set to true, otherwise *continuous is set to false.
QList<qreal> QCameraExposure::supportedShutterSpeeds(bool *continuous = nullptr) const
Returns the list of shutter speed values in seconds camera supports.
If the camera supports arbitrary shutter speed values within the supported range, *continuous is set to true, otherwise *continuous is set to false.