# QTransform Class

The QTransform class specifies 2D transformations of a coordinate system. More...

Header: | #include <QTransform> |

qmake: | QT += gui |

Since: | Qt 4.3 |

This class was introduced in Qt 4.3.

## Public Types

enum | TransformationType { TxNone, TxTranslate, TxScale, TxRotate, TxShear, TxProject } |

## Public Functions

QTransform(qreal m11, qreal m12, qreal m21, qreal m22, qreal dx, qreal dy) | |

QTransform(qreal m11, qreal m12, qreal m13, qreal m21, qreal m22, qreal m23, qreal m31, qreal m32, qreal m33 = 1.0) | |

QTransform() | |

QTransform & | operator=(const QTransform &matrix) |

qreal | m11() const |

qreal | m12() const |

qreal | m13() const |

qreal | m21() const |

qreal | m22() const |

qreal | m23() const |

qreal | m31() const |

qreal | m32() const |

qreal | m33() const |

QTransform | adjoint() const |

qreal | determinant() const |

qreal | dx() const |

qreal | dy() const |

QTransform | inverted(bool *invertible = nullptr) const |

bool | isAffine() const |

bool | isIdentity() const |

bool | isInvertible() const |

bool | isRotating() const |

bool | isScaling() const |

bool | isTranslating() const |

void | map(qreal x, qreal y, qreal *tx, qreal *ty) const |

QPoint | map(const QPoint &point) const |

QPointF | map(const QPointF &p) const |

QLine | map(const QLine &l) const |

QLineF | map(const QLineF &line) const |

QPolygonF | map(const QPolygonF &polygon) const |

QPolygon | map(const QPolygon &polygon) const |

QRegion | map(const QRegion ®ion) const |

QPainterPath | map(const QPainterPath &path) const |

void | map(int x, int y, int *tx, int *ty) const |

QRectF | mapRect(const QRectF &rectangle) const |

QRect | mapRect(const QRect &rectangle) const |

QPolygon | mapToPolygon(const QRect &rectangle) const |

void | reset() |

QTransform & | rotate(qreal angle, Qt::Axis axis = Qt::ZAxis) |

QTransform & | rotateRadians(qreal angle, Qt::Axis axis = Qt::ZAxis) |

QTransform & | scale(qreal sx, qreal sy) |

void | setMatrix(qreal m11, qreal m12, qreal m13, qreal m21, qreal m22, qreal m23, qreal m31, qreal m32, qreal m33) |

QTransform & | shear(qreal sh, qreal sv) |

QTransform & | translate(qreal dx, qreal dy) |

QTransform | transposed() const |

QTransform::TransformationType | type() const |

QVariant | operator QVariant() const |

bool | operator!=(const QTransform &matrix) const |

QTransform | operator*(const QTransform &matrix) const |

QTransform & | operator*=(const QTransform &matrix) |

QTransform & | operator*=(qreal scalar) |

QTransform & | operator+=(qreal scalar) |

QTransform & | operator-=(qreal scalar) |

QTransform & | operator/=(qreal scalar) |

bool | operator==(const QTransform &matrix) const |

## Static Public Members

QTransform | fromScale(qreal sx, qreal sy) |

QTransform | fromTranslate(qreal dx, qreal dy) |

bool | quadToQuad(const QPolygonF &one, const QPolygonF &two, QTransform &trans) |

bool | quadToSquare(const QPolygonF &quad, QTransform &trans) |

bool | squareToQuad(const QPolygonF &quad, QTransform &trans) |

## Related Non-Members

bool | qFuzzyCompare(const QTransform &t1, const QTransform &t2) |

uint | qHash(const QTransform &key, uint seed = 0) |

QPainterPath | operator*(const QPainterPath &path, const QTransform &matrix) |

QPoint | operator*(const QPoint &point, const QTransform &matrix) |

QPointF | operator*(const QPointF &point, const QTransform &matrix) |

QLineF | operator*(const QLineF &line, const QTransform &matrix) |

QLine | operator*(const QLine &line, const QTransform &matrix) |

QPolygon | operator*(const QPolygon &polygon, const QTransform &matrix) |

QPolygonF | operator*(const QPolygonF &polygon, const QTransform &matrix) |

QRegion | operator*(const QRegion ®ion, const QTransform &matrix) |

QDataStream & | operator<<(QDataStream &stream, const QTransform &matrix) |

QDataStream & | operator>>(QDataStream &stream, QTransform &matrix) |

## Detailed Description

A transformation specifies how to translate, scale, shear, rotate or project the coordinate system, and is typically used when rendering graphics.

QTransform differs from QMatrix in that it is a true 3x3 matrix, allowing perspective transformations. QTransform's toAffine() method allows casting QTransform to QMatrix. If a perspective transformation has been specified on the matrix, then the conversion will cause loss of data.

QTransform is the recommended transformation class in Qt.

A QTransform object can be built using the setMatrix(), scale(), rotate(), translate() and shear() functions. Alternatively, it can be built by applying basic matrix operations. The matrix can also be defined when constructed, and it can be reset to the identity matrix (the default) using the reset() function.

The QTransform class supports mapping of graphic primitives: A given point, line, polygon, region, or painter path can be mapped to the coordinate system defined by *this* matrix using the map() function. In case of a rectangle, its coordinates can be transformed using the mapRect() function. A rectangle can also be transformed into a *polygon* (mapped to the coordinate system defined by *this* matrix), using the mapToPolygon() function.

QTransform provides the isIdentity() function which returns `true`

if the matrix is the identity matrix, and the isInvertible() function which returns `true`

if the matrix is non-singular (i.e. AB = BA = I). The inverted() function returns an inverted copy of *this* matrix if it is invertible (otherwise it returns the identity matrix), and adjoint() returns the matrix's classical adjoint. In addition, QTransform provides the determinant() function which returns the matrix's determinant.

Finally, the QTransform class supports matrix multiplication, addition and subtraction, and objects of the class can be streamed as well as compared.

### Rendering Graphics

When rendering graphics, the matrix defines the transformations but the actual transformation is performed by the drawing routines in QPainter.

By default, QPainter operates on the associated device's own coordinate system. The standard coordinate system of a QPaintDevice has its origin located at the top-left position. The *x* values increase to the right; *y* values increase downward. For a complete description, see the coordinate system documentation.

QPainter has functions to translate, scale, shear and rotate the coordinate system without using a QTransform. For example:

void SimpleTransformation::paintEvent(QPaintEvent *) { QPainter painter(this); painter.setPen(QPen(Qt::blue, 1, Qt::DashLine)); painter.drawRect(0, 0, 100, 100); painter.rotate(45); painter.setFont(QFont("Helvetica", 24)); painter.setPen(QPen(Qt::black, 1)); painter.drawText(20, 10, "QTransform"); } |

Although these functions are very convenient, it can be more efficient to build a QTransform and call QPainter::setTransform() if you want to perform more than a single transform operation. For example:

void CombinedTransformation::paintEvent(QPaintEvent *) { QPainter painter(this); painter.setPen(QPen(Qt::blue, 1, Qt::DashLine)); painter.drawRect(0, 0, 100, 100); QTransform transform; transform.translate(50, 50); transform.rotate(45); transform.scale(0.5, 1.0); painter.setTransform(transform); painter.setFont(QFont("Helvetica", 24)); painter.setPen(QPen(Qt::black, 1)); painter.drawText(20, 10, "QTransform"); } |

### Basic Matrix Operations

A QTransform object contains a 3 x 3 matrix. The `m31`

(`dx`

) and `m32`

(`dy`

) elements specify horizontal and vertical translation. The `m11`

and `m22`

elements specify horizontal and vertical scaling. The `m21`

and `m12`

elements specify horizontal and vertical *shearing*. And finally, the `m13`

and `m23`

elements specify horizontal and vertical projection, with `m33`

as an additional projection factor.

QTransform transforms a point in the plane to another point using the following formulas:

x' = m11*x + m21*y + dx y' = m22*y + m12*x + dy if (!isAffine()) { w' = m13*x + m23*y + m33 x' /= w' y' /= w' }

The point *(x, y)* is the original point, and *(x', y')* is the transformed point. *(x', y')* can be transformed back to *(x, y)* by performing the same operation on the inverted() matrix.

The various matrix elements can be set when constructing the matrix, or by using the setMatrix() function later on. They can also be manipulated using the translate(), rotate(), scale() and shear() convenience functions. The currently set values can be retrieved using the m11(), m12(), m13(), m21(), m22(), m23(), m31(), m32(), m33(), dx() and dy() functions.

Translation is the simplest transformation. Setting `dx`

and `dy`

will move the coordinate system `dx`

units along the X axis and `dy`

units along the Y axis. Scaling can be done by setting `m11`

and `m22`

. For example, setting `m11`

to 2 and `m22`

to 1.5 will double the height and increase the width by 50%. The identity matrix has `m11`

, `m22`

, and `m33`

set to 1 (all others are set to 0) mapping a point to itself. Shearing is controlled by `m12`

and `m21`

. Setting these elements to values different from zero will twist the coordinate system. Rotation is achieved by setting both the shearing factors and the scaling factors. Perspective transformation is achieved by setting both the projection factors and the scaling factors.

#### Combining Transforms

Here's the combined transformations example using basic matrix operations:

void BasicOperations::paintEvent(QPaintEvent *) { const double a = qDegreesToRadians(45.0); double sina = sin(a); double cosa = cos(a); QTransform scale(0.5, 0, 0, 1.0, 0, 0); QTransform rotate(cosa, sina, -sina, cosa, 0, 0); QTransform translate(1, 0, 0, 1, 50.0, 50.0); QTransform transform = scale * rotate * translate; QPainter painter(this); painter.setPen(QPen(Qt::blue, 1, Qt::DashLine)); painter.drawRect(0, 0, 100, 100); painter.setTransform(transform); painter.setFont(QFont("Helvetica", 24)); painter.setPen(QPen(Qt::black, 1)); painter.drawText(20, 10, "QTransform"); } |

The combined transform first scales each operand, then rotates it, and finally translates it, just as in the order in which the product of its factors is written. This means the point to which the transforms are applied is implicitly multiplied on the left with the transform to its right.

#### Relation to Matrix Notation

The matrix notation in QTransform is the transpose of a commonly-taught convention which represents transforms and points as matrices and vectors. That convention multiplies its matrix on the left and column vector to the right. In other words, when several transforms are applied to a point, the right-most matrix acts directly on the vector first. Then the next matrix to the left acts on the result of the first operation - and so on. As a result, that convention multiplies the matrices that make up a composite transform in the reverse of the order in QTransform, as you can see in Combining Transforms. Transposing the matrices, and combining them to the right of a row vector that represents the point, lets the matrices of transforms appear, in their product, in the order in which we think of the transforms being applied to the point.

**See also **QPainter, Coordinate System, Affine Transformations Example, and Transformations Example.

## Member Type Documentation

### enum QTransform::TransformationType

Constant | Value |
---|---|

`QTransform::TxNone` | `0x00` |

`QTransform::TxTranslate` | `0x01` |

`QTransform::TxScale` | `0x02` |

`QTransform::TxRotate` | `0x04` |

`QTransform::TxShear` | `0x08` |

`QTransform::TxProject` | `0x10` |

## Member Function Documentation

### QTransform::QTransform(qreal *m11*, qreal *m12*, qreal *m21*, qreal *m22*, qreal *dx*, qreal *dy*)

Constructs a matrix with the elements, *m11*, *m12*, *m21*, *m22*, *dx* and *dy*.

**See also **setMatrix().

### QTransform::QTransform(qreal *m11*, qreal *m12*, qreal *m13*, qreal *m21*, qreal *m22*, qreal *m23*, qreal *m31*, qreal *m32*, qreal *m33* = 1.0)

Constructs a matrix with the elements, *m11*, *m12*, *m13*, *m21*, *m22*, *m23*, *m31*, *m32*, *m33*.

**See also **setMatrix().

### QTransform::QTransform()

Constructs an identity matrix.

All elements are set to zero except `m11`

and `m22`

(specifying the scale) and `m33`

which are set to 1.

**See also **reset().

### QTransform &QTransform::operator=(const QTransform &*matrix*)

Assigns the given *matrix*'s values to this matrix.

### qreal QTransform::m11() const

Returns the horizontal scaling factor.

**See also **scale() and Basic Matrix Operations.

### qreal QTransform::m12() const

Returns the vertical shearing factor.

**See also **shear() and Basic Matrix Operations.

### qreal QTransform::m13() const

Returns the horizontal projection factor.

**See also **translate() and Basic Matrix Operations.

### qreal QTransform::m21() const

Returns the horizontal shearing factor.

**See also **shear() and Basic Matrix Operations.

### qreal QTransform::m22() const

Returns the vertical scaling factor.

**See also **scale() and Basic Matrix Operations.

### qreal QTransform::m23() const

Returns the vertical projection factor.

**See also **translate() and Basic Matrix Operations.

### qreal QTransform::m31() const

Returns the horizontal translation factor.

**See also **dx(), translate(), and Basic Matrix Operations.

### qreal QTransform::m32() const

Returns the vertical translation factor.

**See also **dy(), translate(), and Basic Matrix Operations.

### qreal QTransform::m33() const

Returns the division factor.

**See also **translate() and Basic Matrix Operations.

### QTransform QTransform::adjoint() const

Returns the adjoint of this matrix.

### qreal QTransform::determinant() const

Returns the matrix's determinant.

### qreal QTransform::dx() const

Returns the horizontal translation factor.

**See also **m31(), translate(), and Basic Matrix Operations.

### qreal QTransform::dy() const

Returns the vertical translation factor.

**See also **translate() and Basic Matrix Operations.

`[static] `

QTransform QTransform::fromScale(qreal *sx*, qreal *sy*)

Creates a matrix which corresponds to a scaling of *sx* horizontally and *sy* vertically. This is the same as QTransform().scale(sx, sy) but slightly faster.

This function was introduced in Qt 4.5.

`[static] `

QTransform QTransform::fromTranslate(qreal *dx*, qreal *dy*)

Creates a matrix which corresponds to a translation of *dx* along the x axis and *dy* along the y axis. This is the same as QTransform().translate(dx, dy) but slightly faster.

This function was introduced in Qt 4.5.

### QTransform QTransform::inverted(bool **invertible* = nullptr) const

Returns an inverted copy of this matrix.

If the matrix is singular (not invertible), the returned matrix is the identity matrix. If *invertible* is valid (i.e. not 0), its value is set to true if the matrix is invertible, otherwise it is set to false.

**See also **isInvertible().

### bool QTransform::isAffine() const

Returns `true`

if the matrix represent an affine transformation, otherwise returns `false`

.

### bool QTransform::isIdentity() const

Returns `true`

if the matrix is the identity matrix, otherwise returns `false`

.

**See also **reset().

### bool QTransform::isInvertible() const

Returns `true`

if the matrix is invertible, otherwise returns `false`

.

**See also **inverted().

### bool QTransform::isRotating() const

Returns `true`

if the matrix represents some kind of a rotating transformation, otherwise returns `false`

.

**Note: **A rotation transformation of 180 degrees and/or 360 degrees is treated as a scaling transformation.

**See also **reset().

### bool QTransform::isScaling() const

Returns `true`

if the matrix represents a scaling transformation, otherwise returns `false`

.

**See also **reset().

### bool QTransform::isTranslating() const

Returns `true`

if the matrix represents a translating transformation, otherwise returns `false`

.

**See also **reset().

### void QTransform::map(qreal *x*, qreal *y*, qreal **tx*, qreal **ty*) const

Maps the given coordinates *x* and *y* into the coordinate system defined by this matrix. The resulting values are put in **tx* and **ty*, respectively.

The coordinates are transformed using the following formulas:

x' = m11*x + m21*y + dx y' = m22*y + m12*x + dy if (!isAffine()) { w' = m13*x + m23*y + m33 x' /= w' y' /= w' }

The point (x, y) is the original point, and (x', y') is the transformed point.

**See also **Basic Matrix Operations.

### QPoint QTransform::map(const QPoint &*point*) const

This is an overloaded function.

Creates and returns a QPoint object that is a copy of the given *point*, mapped into the coordinate system defined by this matrix. Note that the transformed coordinates are rounded to the nearest integer.

### QPointF QTransform::map(const QPointF &*p*) const

This is an overloaded function.

Creates and returns a QPointF object that is a copy of the given point, *p*, mapped into the coordinate system defined by this matrix.

### QLine QTransform::map(const QLine &*l*) const

This is an overloaded function.

Creates and returns a QLineF object that is a copy of the given line, *l*, mapped into the coordinate system defined by this matrix.

### QLineF QTransform::map(const QLineF &*line*) const

This is an overloaded function.

Creates and returns a QLine object that is a copy of the given *line*, mapped into the coordinate system defined by this matrix. Note that the transformed coordinates are rounded to the nearest integer.

### QPolygonF QTransform::map(const QPolygonF &*polygon*) const

This is an overloaded function.

Creates and returns a QPolygonF object that is a copy of the given *polygon*, mapped into the coordinate system defined by this matrix.

### QPolygon QTransform::map(const QPolygon &*polygon*) const

This is an overloaded function.

Creates and returns a QPolygon object that is a copy of the given *polygon*, mapped into the coordinate system defined by this matrix. Note that the transformed coordinates are rounded to the nearest integer.

### QRegion QTransform::map(const QRegion &*region*) const

This is an overloaded function.

Creates and returns a QRegion object that is a copy of the given *region*, mapped into the coordinate system defined by this matrix.

Calling this method can be rather expensive if rotations or shearing are used.

### QPainterPath QTransform::map(const QPainterPath &*path*) const

This is an overloaded function.

Creates and returns a QPainterPath object that is a copy of the given *path*, mapped into the coordinate system defined by this matrix.

### void QTransform::map(int *x*, int *y*, int **tx*, int **ty*) const

This is an overloaded function.

Maps the given coordinates *x* and *y* into the coordinate system defined by this matrix. The resulting values are put in **tx* and **ty*, respectively. Note that the transformed coordinates are rounded to the nearest integer.

### QRectF QTransform::mapRect(const QRectF &*rectangle*) const

Creates and returns a QRectF object that is a copy of the given *rectangle*, mapped into the coordinate system defined by this matrix.

The rectangle's coordinates are transformed using the following formulas:

x' = m11*x + m21*y + dx y' = m22*y + m12*x + dy if (!isAffine()) { w' = m13*x + m23*y + m33 x' /= w' y' /= w' }

If rotation or shearing has been specified, this function returns the *bounding* rectangle. To retrieve the exact region the given *rectangle* maps to, use the mapToPolygon() function instead.

**See also **mapToPolygon() and Basic Matrix Operations.

### QRect QTransform::mapRect(const QRect &*rectangle*) const

This is an overloaded function.

Creates and returns a QRect object that is a copy of the given *rectangle*, mapped into the coordinate system defined by this matrix. Note that the transformed coordinates are rounded to the nearest integer.

### QPolygon QTransform::mapToPolygon(const QRect &*rectangle*) const

Creates and returns a QPolygon representation of the given *rectangle*, mapped into the coordinate system defined by this matrix.

The rectangle's coordinates are transformed using the following formulas:

Polygons and rectangles behave slightly differently when transformed (due to integer rounding), so `matrix.map(QPolygon(rectangle))`

is not always the same as `matrix.mapToPolygon(rectangle)`

.

**See also **mapRect() and Basic Matrix Operations.

`[static] `

bool QTransform::quadToQuad(const QPolygonF &*one*, const QPolygonF &*two*, QTransform &*trans*)

Creates a transformation matrix, *trans*, that maps a four-sided polygon, *one*, to another four-sided polygon, *two*. Returns `true`

if the transformation is possible; otherwise returns false.

This is a convenience method combining quadToSquare() and squareToQuad() methods. It allows the input quad to be transformed into any other quad.

**See also **squareToQuad() and quadToSquare().

`[static] `

bool QTransform::quadToSquare(const QPolygonF &*quad*, QTransform &*trans*)

Creates a transformation matrix, *trans*, that maps a four-sided polygon, *quad*, to a unit square. Returns `true`

if the transformation is constructed or false if such a transformation does not exist.

**See also **squareToQuad() and quadToQuad().

### void QTransform::reset()

Resets the matrix to an identity matrix, i.e. all elements are set to zero, except `m11`

and `m22`

(specifying the scale) and `m33`

which are set to 1.

**See also **QTransform(), isIdentity(), and Basic Matrix Operations.

### QTransform &QTransform::rotate(qreal *angle*, Qt::Axis *axis* = Qt::ZAxis)

Rotates the coordinate system counterclockwise by the given *angle* about the specified *axis* and returns a reference to the matrix.

Note that if you apply a QTransform to a point defined in widget coordinates, the direction of the rotation will be clockwise because the y-axis points downwards.

The angle is specified in degrees.

**See also **setMatrix().

### QTransform &QTransform::rotateRadians(qreal *angle*, Qt::Axis *axis* = Qt::ZAxis)

Rotates the coordinate system counterclockwise by the given *angle* about the specified *axis* and returns a reference to the matrix.

Note that if you apply a QTransform to a point defined in widget coordinates, the direction of the rotation will be clockwise because the y-axis points downwards.

The angle is specified in radians.

**See also **setMatrix().

### QTransform &QTransform::scale(qreal *sx*, qreal *sy*)

Scales the coordinate system by *sx* horizontally and *sy* vertically, and returns a reference to the matrix.

**See also **setMatrix().

### void QTransform::setMatrix(qreal *m11*, qreal *m12*, qreal *m13*, qreal *m21*, qreal *m22*, qreal *m23*, qreal *m31*, qreal *m32*, qreal *m33*)

Sets the matrix elements to the specified values, *m11*, *m12*, *m13* *m21*, *m22*, *m23* *m31*, *m32* and *m33*. Note that this function replaces the previous values. QTransform provides the translate(), rotate(), scale() and shear() convenience functions to manipulate the various matrix elements based on the currently defined coordinate system.

**See also **QTransform().

### QTransform &QTransform::shear(qreal *sh*, qreal *sv*)

Shears the coordinate system by *sh* horizontally and *sv* vertically, and returns a reference to the matrix.

**See also **setMatrix().

`[static] `

bool QTransform::squareToQuad(const QPolygonF &*quad*, QTransform &*trans*)

Creates a transformation matrix, *trans*, that maps a unit square to a four-sided polygon, *quad*. Returns `true`

if the transformation is constructed or false if such a transformation does not exist.

**See also **quadToSquare() and quadToQuad().

### QTransform &QTransform::translate(qreal *dx*, qreal *dy*)

Moves the coordinate system *dx* along the x axis and *dy* along the y axis, and returns a reference to the matrix.

**See also **setMatrix().

### QTransform QTransform::transposed() const

Returns the transpose of this matrix.

### QTransform::TransformationType QTransform::type() const

Returns the transformation type of this matrix.

The transformation type is the highest enumeration value capturing all of the matrix's transformations. For example, if the matrix both scales and shears, the type would be `TxShear`

, because `TxShear`

has a higher enumeration value than `TxScale`

.

Knowing the transformation type of a matrix is useful for optimization: you can often handle specific types more optimally than handling the generic case.

### QVariant QTransform::operator QVariant() const

Returns the transform as a QVariant.

### bool QTransform::operator!=(const QTransform &*matrix*) const

Returns `true`

if this matrix is not equal to the given *matrix*, otherwise returns `false`

.

### QTransform QTransform::operator*(const QTransform &*matrix*) const

Returns the result of multiplying this matrix by the given *matrix*.

Note that matrix multiplication is not commutative, i.e. a*b != b*a.

### QTransform &QTransform::operator*=(const QTransform &*matrix*)

This is an overloaded function.

Returns the result of multiplying this matrix by the given *matrix*.

### QTransform &QTransform::operator*=(qreal *scalar*)

This is an overloaded function.

Returns the result of performing an element-wise multiplication of this matrix with the given *scalar*.

### QTransform &QTransform::operator+=(qreal *scalar*)

This is an overloaded function.

Returns the matrix obtained by adding the given *scalar* to each element of this matrix.

### QTransform &QTransform::operator-=(qreal *scalar*)

This is an overloaded function.

Returns the matrix obtained by subtracting the given *scalar* from each element of this matrix.

### QTransform &QTransform::operator/=(qreal *scalar*)

This is an overloaded function.

Returns the result of performing an element-wise division of this matrix by the given *scalar*.

### bool QTransform::operator==(const QTransform &*matrix*) const

Returns `true`

if this matrix is equal to the given *matrix*, otherwise returns `false`

.

## Related Non-Members

### bool qFuzzyCompare(const QTransform &*t1*, const QTransform &*t2*)

Returns `true`

if *t1* and *t2* are equal, allowing for a small fuzziness factor for floating-point comparisons; false otherwise.

This function was introduced in Qt 4.6.

### uint qHash(const QTransform &*key*, uint *seed* = 0)

Returns the hash value for *key*, using *seed* to seed the calculation.

This function was introduced in Qt 5.6.

### QPainterPath operator*(const QPainterPath &*path*, const QTransform &*matrix*)

This is the same as *matrix*.map(*path*).

This function was introduced in Qt 4.3.

**See also **QTransform::map().

### QPoint operator*(const QPoint &*point*, const QTransform &*matrix*)

This is the same as *matrix*.map(*point*).

**See also **QTransform::map().

### QPointF operator*(const QPointF &*point*, const QTransform &*matrix*)

Same as *matrix*.map(*point*).

**See also **QTransform::map().

### QLineF operator*(const QLineF &*line*, const QTransform &*matrix*)

This is the same as *matrix*.map(*line*).

**See also **QTransform::map().

### QLine operator*(const QLine &*line*, const QTransform &*matrix*)

This is the same as *matrix*.map(*line*).

**See also **QTransform::map().

### QPolygon operator*(const QPolygon &*polygon*, const QTransform &*matrix*)

This is the same as *matrix*.map(*polygon*).

**See also **QTransform::map().

### QPolygonF operator*(const QPolygonF &*polygon*, const QTransform &*matrix*)

This is the same as *matrix*.map(*polygon*).

This function was introduced in Qt 4.3.

**See also **QTransform::map().

### QRegion operator*(const QRegion &*region*, const QTransform &*matrix*)

This is the same as *matrix*.map(*region*).

**See also **QTransform::map().

### QDataStream &operator<<(QDataStream &*stream*, const QTransform &*matrix*)

Writes the given *matrix* to the given *stream* and returns a reference to the stream.

This function was introduced in Qt 4.3.

**See also **Serializing Qt Data Types.

### QDataStream &operator>>(QDataStream &*stream*, QTransform &*matrix*)

Reads the given *matrix* from the given *stream* and returns a reference to the stream.

This function was introduced in Qt 4.3.

**See also **Serializing Qt Data Types.