Qt Reference Documentation

Contents

QVideoFrame Class Reference

The QVideoFrame class provides a representation of a frame of video data. More...

 #include <QVideoFrame>

This class was introduced in Qt 4.6.

Public Types

enum FieldType { ProgressiveFrame, TopField, BottomField, InterlacedFrame }
enum PixelFormat { Format_Invalid, Format_ARGB32, Format_ARGB32_Premultiplied, Format_RGB32, ..., Format_User }

Public Functions

QVideoFrame ()
QVideoFrame ( QAbstractVideoBuffer * buffer, const QSize & size, PixelFormat format )
QVideoFrame ( int bytes, const QSize & size, int bytesPerLine, PixelFormat format )
QVideoFrame ( const QImage & image )
QVideoFrame ( const QVideoFrame & other )
~QVideoFrame ()
uchar * bits ()
const uchar * bits () const
int bytesPerLine () const
qint64 endTime () const
FieldType fieldType () const
QVariant handle () const
QAbstractVideoBuffer::HandleType handleType () const
int height () const
bool isMapped () const
bool isReadable () const
bool isValid () const
bool isWritable () const
bool map ( QAbstractVideoBuffer::MapMode mode )
QAbstractVideoBuffer::MapMode mapMode () const
int mappedBytes () const
PixelFormat pixelFormat () const
void setEndTime ( qint64 time )
void setFieldType ( FieldType field )
void setStartTime ( qint64 time )
QSize size () const
qint64 startTime () const
void unmap ()
int width () const
QVideoFrame & operator= ( const QVideoFrame & other )

Static Public Members

QImage::Format imageFormatFromPixelFormat ( PixelFormat format )
PixelFormat pixelFormatFromImageFormat ( QImage::Format format )

Detailed Description

The QVideoFrame class provides a representation of a frame of video data.

A QVideoFrame encapsulates the data of a video frame, and information about the frame.

The contents of a video frame can be mapped to memory using the map() function. While mapped the video data can accessed using the bits() function which returns a pointer to a buffer, the total size of which is given by the mappedBytes(), and the size of each line is given by bytesPerLine(). The return value of the handle() function may be used to access frame data using the internal buffer's native APIs.

The video data in a QVideoFrame is encapsulated in a QAbstractVideoBuffer. A QVideoFrame may be constructed from any buffer type by subclassing the QAbstractVideoBuffer class.

Note: QVideoFrame is explicitly shared, any change made to video frame will also apply to any copies.

Member Type Documentation

enum QVideoFrame::FieldType

Specifies the field an interlaced video frame belongs to.

ConstantValueDescription
QVideoFrame::ProgressiveFrame0The frame is not interlaced.
QVideoFrame::TopField1The frame contains a top field.
QVideoFrame::BottomField2The frame contains a bottom field.
QVideoFrame::InterlacedFrame3The frame contains a merged top and bottom field.

enum QVideoFrame::PixelFormat

Enumerates video data types.

ConstantValueDescription
QVideoFrame::Format_Invalid0The frame is invalid.
QVideoFrame::Format_ARGB321The frame is stored using a 32-bit ARGB format (0xAARRGGBB). This is equivalent to QImage::Format_ARGB32.
QVideoFrame::Format_ARGB32_Premultiplied2The frame stored using a premultiplied 32-bit ARGB format (0xAARRGGBB). This is equivalent to QImage::Format_ARGB32_Premultiplied.
QVideoFrame::Format_RGB323The frame stored using a 32-bit RGB format (0xffRRGGBB). This is equivalent to QImage::Format_RGB32
QVideoFrame::Format_RGB244The frame is stored using a 24-bit RGB format (8-8-8). This is equivalent to QImage::Format_RGB888
QVideoFrame::Format_RGB5655The frame is stored using a 16-bit RGB format (5-6-5). This is equivalent to QImage::Format_RGB16.
QVideoFrame::Format_RGB5556The frame is stored using a 16-bit RGB format (5-5-5). This is equivalent to QImage::Format_RGB555.
QVideoFrame::Format_ARGB8565_Premultiplied7The frame is stored using a 24-bit premultiplied ARGB format (8-6-6-5).
QVideoFrame::Format_BGRA328The frame is stored using a 32-bit ARGB format (0xBBGGRRAA).
QVideoFrame::Format_BGRA32_Premultiplied9The frame is stored using a premultiplied 32bit BGRA format.
QVideoFrame::Format_BGR3210The frame is stored using a 32-bit BGR format (0xBBGGRRff).
QVideoFrame::Format_BGR2411The frame is stored using a 24-bit BGR format (0xBBGGRR).
QVideoFrame::Format_BGR56512The frame is stored using a 16-bit BGR format (5-6-5).
QVideoFrame::Format_BGR55513The frame is stored using a 16-bit BGR format (5-5-5).
QVideoFrame::Format_BGRA5658_Premultiplied14The frame is stored using a 24-bit premultiplied BGRA format (5-6-5-8).
QVideoFrame::Format_AYUV44415The frame is stored using a packed 32-bit AYUV format (0xAAYYUUVV).
QVideoFrame::Format_AYUV444_Premultiplied16The frame is stored using a packed premultiplied 32-bit AYUV format (0xAAYYUUVV).
QVideoFrame::Format_YUV44417The frame is stored using a 24-bit packed YUV format (8-8-8).
QVideoFrame::Format_YUV420P18The frame is stored using an 8-bit per component planar YUV format with the U and V planes horizontally and vertically sub-sampled, i.e. the height and width of the U and V planes are half that of the Y plane.
QVideoFrame::Format_YV1219The frame is stored using an 8-bit per component planar YVU format with the V and U planes horizontally and vertically sub-sampled, i.e. the height and width of the V and U planes are half that of the Y plane.
QVideoFrame::Format_UYVY20The frame is stored using an 8-bit per component packed YUV format with the U and V planes horizontally sub-sampled (U-Y-V-Y), i.e. two horizontally adjacent pixels are stored as a 32-bit macropixel which has a Y value for each pixel and common U and V values.
QVideoFrame::Format_YUYV21The frame is stored using an 8-bit per component packed YUV format with the U and V planes horizontally sub-sampled (Y-U-Y-V), i.e. two horizontally adjacent pixels are stored as a 32-bit macropixel which has a Y value for each pixel and common U and V values.
QVideoFrame::Format_NV1222The frame is stored using an 8-bit per component semi-planar YUV format with a Y plane (Y) followed by a horizontally and vertically sub-sampled, packed UV plane (U-V).
QVideoFrame::Format_NV2123The frame is stored using an 8-bit per component semi-planar YUV format with a Y plane (Y) followed by a horizontally and vertically sub-sampled, packed VU plane (V-U).
QVideoFrame::Format_IMC124The frame is stored using an 8-bit per component planar YUV format with the U and V planes horizontally and vertically sub-sampled. This is similar to the Format_YUV420P type, except that the bytes per line of the U and V planes are padded out to the same stride as the Y plane.
QVideoFrame::Format_IMC225The frame is stored using an 8-bit per component planar YUV format with the U and V planes horizontally and vertically sub-sampled. This is similar to the Format_YUV420P type, except that the lines of the U and V planes are interleaved, i.e. each line of U data is followed by a line of V data creating a single line of the same stride as the Y data.
QVideoFrame::Format_IMC326The frame is stored using an 8-bit per component planar YVU format with the V and U planes horizontally and vertically sub-sampled. This is similar to the Format_YV12 type, except that the bytes per line of the V and U planes are padded out to the same stride as the Y plane.
QVideoFrame::Format_IMC427The frame is stored using an 8-bit per component planar YVU format with the V and U planes horizontally and vertically sub-sampled. This is similar to the Format_YV12 type, except that the lines of the V and U planes are interleaved, i.e. each line of V data is followed by a line of U data creating a single line of the same stride as the Y data.
QVideoFrame::Format_Y828The frame is stored using an 8-bit greyscale format.
QVideoFrame::Format_Y1629The frame is stored using a 16-bit linear greyscale format. Little endian.
QVideoFrame::Format_User1000Start value for user defined pixel formats.

Member Function Documentation

QVideoFrame::QVideoFrame ()

Constructs a null video frame.

QVideoFrame::QVideoFrame ( QAbstractVideoBuffer * buffer, const QSize & size, PixelFormat format )

Constructs a video frame from a buffer of the given pixel format and size in pixels.

Note: This doesn't increment the reference count of the video buffer.

QVideoFrame::QVideoFrame ( int bytes, const QSize & size, int bytesPerLine, PixelFormat format )

Constructs a video frame of the given pixel format and size in pixels.

The bytesPerLine (stride) is the length of each scan line in bytes, and bytes is the total number of bytes that must be allocated for the frame.

QVideoFrame::QVideoFrame ( const QImage & image )

Constructs a video frame from an image.

Note: This will construct an invalid video frame if there is no frame type equivalent to the image format.

See also pixelFormatFromImageFormat().

QVideoFrame::QVideoFrame ( const QVideoFrame & other )

Constructs a copy of other.

QVideoFrame::~QVideoFrame ()

Destroys a video frame.

uchar * QVideoFrame::bits ()

Returns a pointer to the start of the frame data buffer.

This value is only valid while the frame data is mapped.

See also map(), mappedBytes(), and bytesPerLine().

const uchar * QVideoFrame::bits () const

Returns a pointer to the start of the frame data buffer.

This value is only valid while the frame data is mapped.

See also map(), mappedBytes(), and bytesPerLine().

int QVideoFrame::bytesPerLine () const

Returns the number of bytes in a scan line.

Note: This is the bytes per line of the first plane only. The bytes per line of subsequent planes should be calculated as per the frame type.

This value is only valid while the frame data is mapped.

See also bits(), map(), and mappedBytes().

qint64 QVideoFrame::endTime () const

Returns the presentation time when a frame should stop being displayed.

See also setEndTime().

FieldType QVideoFrame::fieldType () const

Returns the field an interlaced video frame belongs to.

If the video is not interlaced this will return WholeFrame.

See also setFieldType().

QVariant QVideoFrame::handle () const

Returns a type specific handle to a video frame's buffer.

For an OpenGL texture this would be the texture ID.

See also QAbstractVideoBuffer::handle().

QAbstractVideoBuffer::HandleType QVideoFrame::handleType () const

Returns the type of a video frame's handle.

int QVideoFrame::height () const

Returns the height of a video frame.

QImage::Format QVideoFrame::imageFormatFromPixelFormat ( PixelFormat format ) [static]

Returns an image format equivalent to a video frame pixel format. If there is no equivalent format QImage::Format_Invalid is returned instead.

bool QVideoFrame::isMapped () const

Identifies if a video frame's contents are currently mapped to system memory.

This is a convenience function which checks that the MapMode of the frame is not equal to QAbstractVideoBuffer::NotMapped.

Returns true if the contents of the video frame are mapped to system memory, and false otherwise.

See also mapMode() and QAbstractVideoBuffer::MapMode.

bool QVideoFrame::isReadable () const

Identifies if the mapped contents of a video frame were read from the frame when it was mapped.

This is a convenience function which checks if the MapMode contains the QAbstractVideoBuffer::WriteOnly flag.

Returns true if the contents of the mapped memory were read from the video frame, and false otherwise.

See also mapMode() and QAbstractVideoBuffer::MapMode.

bool QVideoFrame::isValid () const

Identifies whether a video frame is valid.

An invalid frame has no video buffer associated with it.

Returns true if the frame is valid, and false if it is not.

bool QVideoFrame::isWritable () const

Identifies if the mapped contents of a video frame will be persisted when the frame is unmapped.

This is a convenience function which checks if the MapMode contains the QAbstractVideoBuffer::WriteOnly flag.

Returns true if the video frame will be updated when unmapped, and false otherwise.

Note: The result of altering the data of a frame that is mapped in read-only mode is undefined. Depending on the buffer implementation the changes may be persisted, or worse alter a shared buffer.

See also mapMode() and QAbstractVideoBuffer::MapMode.

bool QVideoFrame::map ( QAbstractVideoBuffer::MapMode mode )

Maps the contents of a video frame to memory.

The map mode indicates whether the contents of the mapped memory should be read from and/or written to the frame. If the map mode includes the QAbstractVideoBuffer::ReadOnly flag the mapped memory will be populated with the content of the video frame when mapped. If the map mode inclues the QAbstractVideoBuffer::WriteOnly flag the content of the mapped memory will be persisted in the frame when unmapped.

While mapped the contents of a video frame can be accessed directly through the pointer returned by the bits() function.

When access to the data is no longer needed be sure to call the unmap() function to release the mapped memory.

Returns true if the buffer was mapped to memory in the given mode and false otherwise.

See also unmap(), mapMode(), and bits().

QAbstractVideoBuffer::MapMode QVideoFrame::mapMode () const

Returns the mode a video frame was mapped to system memory in.

See also map() and QAbstractVideoBuffer::MapMode.

int QVideoFrame::mappedBytes () const

Returns the number of bytes occupied by the mapped frame data.

This value is only valid while the frame data is mapped.

See also map().

PixelFormat QVideoFrame::pixelFormat () const

Returns the color format of a video frame.

PixelFormat QVideoFrame::pixelFormatFromImageFormat ( QImage::Format format ) [static]

Returns an video pixel format equivalent to an image format. If there is no equivalent format QVideoFrame::InvalidType is returned instead.

void QVideoFrame::setEndTime ( qint64 time )

Sets the presentation time when a frame should stop being displayed.

See also endTime().

void QVideoFrame::setFieldType ( FieldType field )

Sets the field an interlaced video frame belongs to.

See also fieldType().

void QVideoFrame::setStartTime ( qint64 time )

Sets the presentation time when the frame should be displayed.

See also startTime().

QSize QVideoFrame::size () const

Returns the size of a video frame.

qint64 QVideoFrame::startTime () const

Returns the presentation time when the frame should be displayed.

See also setStartTime().

void QVideoFrame::unmap ()

Releases the memory mapped by the map() function.

If the MapMode included the QAbstractVideoBuffer::WriteOnly flag this will persist the current content of the mapped memory to the video frame.

See also map().

int QVideoFrame::width () const

Returns the width of a video frame.

QVideoFrame & QVideoFrame::operator= ( const QVideoFrame & other )

Assigns the contents of other to a video frame.