The QHelpEngineCore class provides the core functionality of the help system. More...
#include <QHelpEngineCore>Inherits: QObject.
Inherited by: QHelpEngine.
This class was introduced in Qt 4.4.
| QHelpEngineCore ( const QString & collectionFile, QObject * parent = 0 ) | |
| virtual | ~QHelpEngineCore () |
| bool | addCustomFilter ( const QString & filterName, const QStringList & attributes ) |
| bool | autoSaveFilter () const |
| QString | collectionFile () const |
| bool | copyCollectionFile ( const QString & fileName ) |
| QString | currentFilter () const |
| QStringList | customFilters () const |
| QVariant | customValue ( const QString & key, const QVariant & defaultValue = QVariant() ) const |
| QString | documentationFileName ( const QString & namespaceName ) |
| QString | error () const |
| QByteArray | fileData ( const QUrl & url ) const |
| QList<QUrl> | files ( const QString namespaceName, const QStringList & filterAttributes, const QString & extensionFilter = QString() ) |
| QList<QStringList> | filterAttributeSets ( const QString & namespaceName ) const |
| QStringList | filterAttributes () const |
| QStringList | filterAttributes ( const QString & filterName ) const |
| QUrl | findFile ( const QUrl & url ) const |
| QMap<QString, QUrl> | linksForIdentifier ( const QString & id ) const |
| bool | registerDocumentation ( const QString & documentationFileName ) |
| QStringList | registeredDocumentations () const |
| bool | removeCustomFilter ( const QString & filterName ) |
| bool | removeCustomValue ( const QString & key ) |
| void | setAutoSaveFilter ( bool save ) |
| void | setCollectionFile ( const QString & fileName ) |
| void | setCurrentFilter ( const QString & filterName ) |
| bool | setCustomValue ( const QString & key, const QVariant & value ) |
| bool | setupData () |
| bool | unregisterDocumentation ( const QString & namespaceName ) |
| void | currentFilterChanged ( const QString & newFilter ) |
| void | readersAboutToBeInvalidated () |
| void | setupFinished () |
| void | setupStarted () |
| void | warning ( const QString & msg ) |
| QVariant | metaData ( const QString & documentationFileName, const QString & name ) |
| QString | namespaceName ( const QString & documentationFileName ) |
The QHelpEngineCore class provides the core functionality of the help system.
Before the help engine can be used, it must be initialized by calling setupData(). At the beginning of the setup process the signal setupStarted() is emitted. From this point on until the signal setupFinished() is emitted, is the help data in an undefined meaning unusable state.
The core help engine can be used to perform different tasks. By calling linksForIdentifier() the engine returns urls specifying the file locations inside the help system. The actual file data can then be retrived by calling fileData(). In contrast to all other functions in this class, linksForIdentifier() depends on the currently set custom filter. Depending on the filter, the function may return different hits.
Every help engine can contain any number of custom filters. A custom filter is defined by a name and set of filter attributes and can be added to the help engine by calling addCustomFilter(). Analogous, it is removed by calling removeCustomFilter(). customFilters() returns all defined filters.
The help engine also offers the possibility to set and read values in a persistant way comparable to ini files or Windows registry entries. For more information see setValue() or value().
This class does not offer any GUI components or functionality for indices or contents. If you need one of those use QHelpEngine instead.
When creating a custom help viewer the viewer can be configured by writing a custom collection file which could contain various keywords to be used to configure the help engine. These keywords and values and their meaning can be found in the help information for creating a custom help collection file for Assistant.
This property holds whether QHelpEngineCore is in auto save filter mode or not.
If QHelpEngineCore is in auto save filter mode, the current filter is automatically saved when it is changed by the setCurrentFilter() function. The filter is saved persistently in the help collection file.
By default, this mode is on.
This property was introduced in Qt 4.5.
Access functions:
| bool | autoSaveFilter () const |
| void | setAutoSaveFilter ( bool save ) |
This property holds the absolute file name of the collection file currently used.
Setting this property leaves the help engine in an invalid state. It is important to invoke setupData() or any getter function in order to setup the help engine again.
This property was introduced in Qt 4.5.
Access functions:
| QString | collectionFile () const |
| void | setCollectionFile ( const QString & fileName ) |
This property holds the name of the custom filter currently applied.
Setting this property will save the new custom filter permanently in the help collection file. To set a custom filter without saving it permanently, disable the auto save filter mode.
This property was introduced in Qt 4.5.
Access functions:
| QString | currentFilter () const |
| void | setCurrentFilter ( const QString & filterName ) |
See also autoSaveFilter().
Constructs a new core help engine with a parent. The help engine uses the information stored in the collectionFile to provide help. If the collection file does not exist yet, it'll be created.
Destructs the help engine.
Adds the new custom filter filterName. The filter attributes are specified by attributes. If the filter already exists, its attribute set is replaced. The function returns true if the operation succeeded, otherwise it returns false.
See also customFilters() and removeCustomFilter().
Creates the file fileName and copies all contents from the current collection file into the newly created file, and returns true if successful; otherwise returns false.
The copying process makes sure that file references to Qt Collection files (.qch) files are updated accordingly.
This signal is emitted when the current filter is changed to newFilter.
Returns a list of custom filters.
See also addCustomFilter() and removeCustomFilter().
Returns the value assigned to the key. If the requested key does not exist, the specified defaultValue is returned.
See also setCustomValue() and removeCustomValue().
Returns the absolute file name of the Qt compressed help file (.qch) identified by the namespaceName. If there is no Qt compressed help file with the specified namespace registered, an empty string is returned.
See also namespaceName().
Returns a description of the last error that occurred.
Returns the data of the file specified by url. If the file does not exist, an empty QByteArray is returned.
See also findFile().
Returns a list of files contained in the Qt compressed help file namespaceName. The files can be filtered by filterAttributes as well as by their extension extensionFilter (e.g. 'html').
Returns a list of filter attributes for the different filter sections defined in the Qt compressed help file with the given namespace namespaceName.
Returns a list of all defined filter attributes.
Returns a list of filter attributes used by the custom filter filterName.
Returns an invalid URL if the file url cannot be found. If the file exists, either the same url is returned or a different url if the file is located in a different namespace which is merged via a common virtual folder.
Returns a map of hits found for the id. A hit contains the title of the document and the url where the keyword is located. The result depends on the current filter, meaning only the keywords registered for the current filter will be returned.
Returns the meta data for the Qt compressed help file documentationFileName. If there is no data available for name, an invalid QVariant() is returned. The meta data is defined when creating the Qt compressed help file and cannot be modified later. Common meta data includes e.g. the author of the documentation.
Returns the namespace name defined for the Qt compressed help file (.qch) specified by its documentationFileName. If the file is not valid, an empty string is returned.
See also documentationFileName().
Registers the Qt compressed help file (.qch) contained in the file documentationFileName. One compressed help file, uniquely identified by its namespace can only be registered once. True is returned if the registration was successful, otherwise false.
See also unregisterDocumentation() and error().
Returns a list of all registered Qt compressed help files of the current collection file. The returned names are the namespaces of the registered Qt compressed help files (.qch).
Returns true if the filter filterName was removed successfully, otherwise false.
See also addCustomFilter() and customFilters().
Removes the key from the settings section in the collection file. Returns true if the value was removed successfully, otherwise false.
See also customValue() and setCustomValue().
Save the value under the key. If the key already exist, the value will be overwritten. Returns true if the value was saved successfully, otherwise false.
See also customValue() and removeCustomValue().
Sets up the help engine by processing the information found in the collection file and returns true if successful; otherwise returns false.
By calling the function, the help engine is forced to initialize itself immediately. Most of the times, this function does not have to be called explicitly because getter functions which depend on a correctly set up help engine do that themselves.
Note: qsqlite4.dll needs to be deployed with the application as the help system uses the sqlite driver when loading help collections.
This signal is emitted when the setup is complete.
This signal is emitted when setup is started.
Unregisters the Qt compressed help file (.qch) identified by its namespaceName from the help collection. Returns true on success, otherwise false.
See also registerDocumentation() and error().
This signal is emitted when a non critical error occurs. The warning message is stored in msg.