"""
Implements support for BLF (Binary Logging Format) which is a proprietary
CAN log format from Vector Informatik GmbH (Germany).
No official specification of the binary logging format is available.
This implementation is based on Toby Lorenz' C++ library "Vector BLF" which is
licensed under GPLv3. https://bitbucket.org/tobylorenz/vector_blf.
The file starts with a header. The rest is one or more "log containers"
which consists of a header and some zlib compressed data, usually up to 128 kB
of uncompressed data each. This data contains the actual CAN messages and other
objects types.
"""
import struct
import zlib
import datetime
import time
import logging
from typing import List, BinaryIO, Generator, Union, Tuple, Optional, cast, Any
from ..message import Message
from ..util import len2dlc, dlc2len, channel2int
from ..typechecking import StringPathLike
from .generic import FileIOMessageWriter, MessageReader
TSystemTime = Tuple[int, int, int, int, int, int, int, int]
class BLFParseError(Exception):
"""BLF file could not be parsed correctly."""
LOG = logging.getLogger(__name__)
# signature ("LOGG"), header size,
# application ID, application major, application minor, application build,
# bin log major, bin log minor, bin log build, bin log patch,
# file size, uncompressed size, count of objects, count of objects read,
# time start (SYSTEMTIME), time stop (SYSTEMTIME)
FILE_HEADER_STRUCT = struct.Struct("<4sLBBBBBBBBQQLL8H8H")
# Pad file header to this size
FILE_HEADER_SIZE = 144
# signature ("LOBJ"), header size, header version, object size, object type
OBJ_HEADER_BASE_STRUCT = struct.Struct("<4sHHLL")
# flags, client index, object version, timestamp
OBJ_HEADER_V1_STRUCT = struct.Struct("<LHHQ")
# flags, timestamp status, object version, timestamp, (original timestamp)
OBJ_HEADER_V2_STRUCT = struct.Struct("<LBxHQ8x")
# compression method, size uncompressed
LOG_CONTAINER_STRUCT = struct.Struct("<H6xL4x")
# channel, flags, dlc, arbitration id, data
CAN_MSG_STRUCT = struct.Struct("<HBBL8s")
# channel, flags, dlc, arbitration id, frame length, bit count, FD flags,
# valid data bytes, data
CAN_FD_MSG_STRUCT = struct.Struct("<HBBLLBBB5x64s")
# channel, dlc, valid payload length of data, tx count, arbitration id,
# frame length, flags, bit rate used in arbitration phase,
# bit rate used in data phase, time offset of brs field,
# time offset of crc delimiter field, bit count, direction,
# offset if extDataOffset is used, crc
CAN_FD_MSG_64_STRUCT = struct.Struct("<BBBBLLLLLLLHBBL")
# channel, length, flags, ecc, position, dlc, frame length, id, flags ext, data
CAN_ERROR_EXT_STRUCT = struct.Struct("<HHLBBBxLLH2x8s")
# commented event type, foreground color, background color, relocatable,
# group name length, marker name length, description length
GLOBAL_MARKER_STRUCT = struct.Struct("<LLL3xBLLL12x")
CAN_MESSAGE = 1
LOG_CONTAINER = 10
CAN_ERROR_EXT = 73
CAN_MESSAGE2 = 86
GLOBAL_MARKER = 96
CAN_FD_MESSAGE = 100
CAN_FD_MESSAGE_64 = 101
NO_COMPRESSION = 0
ZLIB_DEFLATE = 2
CAN_MSG_EXT = 0x80000000
REMOTE_FLAG = 0x80
EDL = 0x1
BRS = 0x2
ESI = 0x4
DIR = 0x1
TIME_TEN_MICS = 0x00000001
TIME_ONE_NANS = 0x00000002
def timestamp_to_systemtime(timestamp: float) -> TSystemTime:
if timestamp is None or timestamp < 631152000:
# Probably not a Unix timestamp
return 0, 0, 0, 0, 0, 0, 0, 0
t = datetime.datetime.fromtimestamp(round(timestamp, 3))
return (
t.year,
t.month,
t.isoweekday() % 7,
t.day,
t.hour,
t.minute,
t.second,
t.microsecond // 1000,
)
def systemtime_to_timestamp(systemtime: TSystemTime) -> float:
try:
t = datetime.datetime(
systemtime[0],
systemtime[1],
systemtime[3],
systemtime[4],
systemtime[5],
systemtime[6],
systemtime[7] * 1000,
)
return t.timestamp()
except ValueError:
return 0
[docs]class BLFReader(MessageReader):
"""
Iterator of CAN messages from a Binary Logging File.
Only CAN messages and error frames are supported. Other object types are
silently ignored.
"""
file: BinaryIO
def __init__(
self,
file: Union[StringPathLike, BinaryIO],
*args: Any,
**kwargs: Any,
) -> None:
"""
:param file: a path-like object or as file-like object to read from
If this is a file-like object, is has to opened in binary
read mode, not text read mode.
"""
super().__init__(file, mode="rb")
data = self.file.read(FILE_HEADER_STRUCT.size)
header = FILE_HEADER_STRUCT.unpack(data)
if header[0] != b"LOGG":
raise BLFParseError("Unexpected file format")
self.file_size = header[10]
self.uncompressed_size = header[11]
self.object_count = header[12]
self.start_timestamp = systemtime_to_timestamp(cast(TSystemTime, header[14:22]))
self.stop_timestamp = systemtime_to_timestamp(cast(TSystemTime, header[22:30]))
# Read rest of header
self.file.read(header[1] - FILE_HEADER_STRUCT.size)
self._tail = b""
self._pos = 0
def __iter__(self) -> Generator[Message, None, None]:
while True:
data = self.file.read(OBJ_HEADER_BASE_STRUCT.size)
if not data:
# EOF
break
signature, _, _, obj_size, obj_type = OBJ_HEADER_BASE_STRUCT.unpack(data)
if signature != b"LOBJ":
raise BLFParseError()
obj_data = self.file.read(obj_size - OBJ_HEADER_BASE_STRUCT.size)
# Read padding bytes
self.file.read(obj_size % 4)
if obj_type == LOG_CONTAINER:
method, uncompressed_size = LOG_CONTAINER_STRUCT.unpack_from(obj_data)
container_data = obj_data[LOG_CONTAINER_STRUCT.size :]
if method == NO_COMPRESSION:
data = container_data
elif method == ZLIB_DEFLATE:
data = zlib.decompress(container_data, 15, uncompressed_size)
else:
# Unknown compression method
LOG.warning("Unknown compression method (%d)", method)
continue
yield from self._parse_container(data)
self.stop()
def _parse_container(self, data):
if self._tail:
data = b"".join((self._tail, data))
try:
yield from self._parse_data(data)
except struct.error:
# There was not enough data in the container to unpack a struct
pass
# Save the remaining data that could not be processed
self._tail = data[self._pos :]
def _parse_data(self, data):
"""Optimized inner loop by making local copies of global variables
and class members and hardcoding some values."""
unpack_obj_header_base = OBJ_HEADER_BASE_STRUCT.unpack_from
obj_header_base_size = OBJ_HEADER_BASE_STRUCT.size
unpack_obj_header_v1 = OBJ_HEADER_V1_STRUCT.unpack_from
obj_header_v1_size = OBJ_HEADER_V1_STRUCT.size
unpack_obj_header_v2 = OBJ_HEADER_V2_STRUCT.unpack_from
obj_header_v2_size = OBJ_HEADER_V2_STRUCT.size
unpack_can_msg = CAN_MSG_STRUCT.unpack_from
unpack_can_fd_msg = CAN_FD_MSG_STRUCT.unpack_from
unpack_can_fd_64_msg = CAN_FD_MSG_64_STRUCT.unpack_from
can_fd_64_msg_size = CAN_FD_MSG_64_STRUCT.size
unpack_can_error_ext = CAN_ERROR_EXT_STRUCT.unpack_from
start_timestamp = self.start_timestamp
max_pos = len(data)
pos = 0
# Loop until a struct unpack raises an exception
while True:
self._pos = pos
# Find next object after padding (depends on object type)
try:
pos = data.index(b"LOBJ", pos, pos + 8)
except ValueError:
if pos + 8 > max_pos:
# Not enough data in container
return
raise BLFParseError("Could not find next object") from None
header = unpack_obj_header_base(data, pos)
# print(header)
signature, _, header_version, obj_size, obj_type = header
if signature != b"LOBJ":
raise BLFParseError()
# Calculate position of next object
next_pos = pos + obj_size
if next_pos > max_pos:
# This object continues in the next container
return
pos += obj_header_base_size
# Read rest of header
if header_version == 1:
flags, _, _, timestamp = unpack_obj_header_v1(data, pos)
pos += obj_header_v1_size
elif header_version == 2:
flags, _, _, timestamp = unpack_obj_header_v2(data, pos)
pos += obj_header_v2_size
else:
LOG.warning("Unknown object header version (%d)", header_version)
pos = next_pos
continue
# Calculate absolute timestamp in seconds
factor = 1e-5 if flags == 1 else 1e-9
timestamp = timestamp * factor + start_timestamp
if obj_type in (CAN_MESSAGE, CAN_MESSAGE2):
channel, flags, dlc, can_id, can_data = unpack_can_msg(data, pos)
yield Message(
timestamp=timestamp,
arbitration_id=can_id & 0x1FFFFFFF,
is_extended_id=bool(can_id & CAN_MSG_EXT),
is_remote_frame=bool(flags & REMOTE_FLAG),
is_rx=not bool(flags & DIR),
dlc=dlc,
data=can_data[:dlc],
channel=channel - 1,
)
elif obj_type == CAN_ERROR_EXT:
members = unpack_can_error_ext(data, pos)
channel = members[0]
dlc = members[5]
can_id = members[7]
can_data = members[9]
yield Message(
timestamp=timestamp,
is_error_frame=True,
is_extended_id=bool(can_id & CAN_MSG_EXT),
arbitration_id=can_id & 0x1FFFFFFF,
dlc=dlc,
data=can_data[:dlc],
channel=channel - 1,
)
elif obj_type == CAN_FD_MESSAGE:
members = unpack_can_fd_msg(data, pos)
(
channel,
flags,
dlc,
can_id,
_,
_,
fd_flags,
valid_bytes,
can_data,
) = members
yield Message(
timestamp=timestamp,
arbitration_id=can_id & 0x1FFFFFFF,
is_extended_id=bool(can_id & CAN_MSG_EXT),
is_remote_frame=bool(flags & REMOTE_FLAG),
is_fd=bool(fd_flags & 0x1),
is_rx=not bool(flags & DIR),
bitrate_switch=bool(fd_flags & 0x2),
error_state_indicator=bool(fd_flags & 0x4),
dlc=dlc2len(dlc),
data=can_data[:valid_bytes],
channel=channel - 1,
)
elif obj_type == CAN_FD_MESSAGE_64:
(
channel,
dlc,
valid_bytes,
_,
can_id,
_,
fd_flags,
_,
_,
_,
_,
_,
direction,
_,
_,
) = unpack_can_fd_64_msg(data, pos)
pos += can_fd_64_msg_size
yield Message(
timestamp=timestamp,
arbitration_id=can_id & 0x1FFFFFFF,
is_extended_id=bool(can_id & CAN_MSG_EXT),
is_remote_frame=bool(fd_flags & 0x0010),
is_fd=bool(fd_flags & 0x1000),
is_rx=not direction,
bitrate_switch=bool(fd_flags & 0x2000),
error_state_indicator=bool(fd_flags & 0x4000),
dlc=dlc2len(dlc),
data=data[pos : pos + valid_bytes],
channel=channel - 1,
)
pos = next_pos
[docs]class BLFWriter(FileIOMessageWriter):
"""
Logs CAN data to a Binary Logging File compatible with Vector's tools.
"""
file: BinaryIO
#: Max log container size of uncompressed data
max_container_size = 128 * 1024
#: Application identifier for the log writer
application_id = 5
def __init__(
self,
file: Union[StringPathLike, BinaryIO],
append: bool = False,
channel: int = 1,
compression_level: int = -1,
*args: Any,
**kwargs: Any,
) -> None:
"""
:param file: a path-like object or as file-like object to write to
If this is a file-like object, is has to opened in mode "wb+".
:param channel:
Default channel to log as if not specified by the interface.
:param append:
Append messages to an existing log file.
:param compression_level:
An integer from 0 to 9 or -1 controlling the level of compression.
1 (Z_BEST_SPEED) is fastest and produces the least compression.
9 (Z_BEST_COMPRESSION) is slowest and produces the most.
0 means that data will be stored without processing.
The default value is -1 (Z_DEFAULT_COMPRESSION).
Z_DEFAULT_COMPRESSION represents a default compromise between
speed and compression (currently equivalent to level 6).
"""
mode = "rb+" if append else "wb"
try:
super().__init__(file, mode=mode)
except FileNotFoundError:
# Trying to append to a non-existing file, create a new one
append = False
mode = "wb"
super().__init__(file, mode=mode)
assert self.file is not None
self.channel = channel
self.compression_level = compression_level
self._buffer: List[bytes] = []
self._buffer_size = 0
# If max container size is located in kwargs, then update the instance
if kwargs.get("max_container_size", False):
self.max_container_size = kwargs["max_container_size"]
if append:
# Parse file header
data = self.file.read(FILE_HEADER_STRUCT.size)
header = FILE_HEADER_STRUCT.unpack(data)
if header[0] != b"LOGG":
raise BLFParseError("Unexpected file format")
self.uncompressed_size = header[11]
self.object_count = header[12]
self.start_timestamp: Optional[float] = systemtime_to_timestamp(
cast(TSystemTime, header[14:22])
)
self.stop_timestamp: Optional[float] = systemtime_to_timestamp(
cast(TSystemTime, header[22:30])
)
# Jump to the end of the file
self.file.seek(0, 2)
else:
self.object_count = 0
self.uncompressed_size = FILE_HEADER_SIZE
self.start_timestamp = None
self.stop_timestamp = None
# Write a default header which will be updated when stopped
self._write_header(FILE_HEADER_SIZE)
def _write_header(self, filesize):
header = [b"LOGG", FILE_HEADER_SIZE, self.application_id, 0, 0, 0, 2, 6, 8, 1]
# The meaning of "count of objects read" is unknown
header.extend([filesize, self.uncompressed_size, self.object_count, 0])
header.extend(timestamp_to_systemtime(self.start_timestamp))
header.extend(timestamp_to_systemtime(self.stop_timestamp))
self.file.write(FILE_HEADER_STRUCT.pack(*header))
# Pad to header size
self.file.write(b"\x00" * (FILE_HEADER_SIZE - FILE_HEADER_STRUCT.size))
[docs] def on_message_received(self, msg):
channel = channel2int(msg.channel)
if channel is None:
channel = self.channel
else:
# Many interfaces start channel numbering at 0 which is invalid
channel += 1
arb_id = msg.arbitration_id
if msg.is_extended_id:
arb_id |= CAN_MSG_EXT
flags = REMOTE_FLAG if msg.is_remote_frame else 0
if not msg.is_rx:
flags |= DIR
can_data = bytes(msg.data)
if msg.is_error_frame:
data = CAN_ERROR_EXT_STRUCT.pack(
channel,
0, # length
0, # flags
0, # ecc
0, # position
len2dlc(msg.dlc),
0, # frame length
arb_id,
0, # ext flags
can_data,
)
self._add_object(CAN_ERROR_EXT, data, msg.timestamp)
elif msg.is_fd:
fd_flags = EDL
if msg.bitrate_switch:
fd_flags |= BRS
if msg.error_state_indicator:
fd_flags |= ESI
data = CAN_FD_MSG_STRUCT.pack(
channel,
flags,
len2dlc(msg.dlc),
arb_id,
0,
0,
fd_flags,
len(can_data),
can_data,
)
self._add_object(CAN_FD_MESSAGE, data, msg.timestamp)
else:
data = CAN_MSG_STRUCT.pack(channel, flags, msg.dlc, arb_id, can_data)
self._add_object(CAN_MESSAGE, data, msg.timestamp)
[docs] def log_event(self, text, timestamp=None):
"""Add an arbitrary message to the log file as a global marker.
:param str text:
The group name of the marker.
:param float timestamp:
Absolute timestamp in Unix timestamp format. If not given, the
marker will be placed along the last message.
"""
try:
# Only works on Windows
text = text.encode("mbcs")
except LookupError:
text = text.encode("ascii")
comment = b"Added by python-can"
marker = b"python-can"
data = GLOBAL_MARKER_STRUCT.pack(
0, 0xFFFFFF, 0xFF3300, 0, len(text), len(marker), len(comment)
)
self._add_object(GLOBAL_MARKER, data + text + marker + comment, timestamp)
def _add_object(self, obj_type, data, timestamp=None):
if timestamp is None:
timestamp = self.stop_timestamp or time.time()
if self.start_timestamp is None:
self.start_timestamp = timestamp
self.stop_timestamp = timestamp
timestamp = int((timestamp - self.start_timestamp) * 1e9)
header_size = OBJ_HEADER_BASE_STRUCT.size + OBJ_HEADER_V1_STRUCT.size
obj_size = header_size + len(data)
base_header = OBJ_HEADER_BASE_STRUCT.pack(
b"LOBJ", header_size, 1, obj_size, obj_type
)
obj_header = OBJ_HEADER_V1_STRUCT.pack(TIME_ONE_NANS, 0, 0, max(timestamp, 0))
self._buffer.append(base_header)
self._buffer.append(obj_header)
self._buffer.append(data)
padding_size = len(data) % 4
if padding_size:
self._buffer.append(b"\x00" * padding_size)
self._buffer_size += obj_size + padding_size
self.object_count += 1
if self._buffer_size >= self.max_container_size:
self._flush()
def _flush(self):
"""Compresses and writes data in the buffer to file."""
if self.file.closed:
return
buffer = b"".join(self._buffer)
if not buffer:
# Nothing to write
return
uncompressed_data = memoryview(buffer)[: self.max_container_size]
# Save data that comes after max size to next container
tail = buffer[self.max_container_size :]
self._buffer = [tail]
self._buffer_size = len(tail)
if not self.compression_level:
data = uncompressed_data
method = NO_COMPRESSION
else:
data = zlib.compress(uncompressed_data, self.compression_level)
method = ZLIB_DEFLATE
obj_size = OBJ_HEADER_BASE_STRUCT.size + LOG_CONTAINER_STRUCT.size + len(data)
base_header = OBJ_HEADER_BASE_STRUCT.pack(
b"LOBJ", OBJ_HEADER_BASE_STRUCT.size, 1, obj_size, LOG_CONTAINER
)
container_header = LOG_CONTAINER_STRUCT.pack(method, len(uncompressed_data))
self.file.write(base_header)
self.file.write(container_header)
self.file.write(data)
# Write padding bytes
self.file.write(b"\x00" * (obj_size % 4))
self.uncompressed_size += OBJ_HEADER_BASE_STRUCT.size
self.uncompressed_size += LOG_CONTAINER_STRUCT.size
self.uncompressed_size += len(uncompressed_data)
[docs] def file_size(self) -> int:
"""Return an estimate of the current file size in bytes."""
return self.file.tell() + self._buffer_size
[docs] def stop(self):
"""Stops logging and closes the file."""
self._flush()
if self.file.seekable():
filesize = self.file.tell()
# Write header in the beginning of the file
self.file.seek(0)
self._write_header(filesize)
else:
LOG.error("Could not write BLF header since file is not seekable")
super().stop()