network¶

network create¶

Create new network

openstack network create
    [--extra-property type=<property_type>,name=<property_name>,value=<property_value>]
    [--share | --no-share]
    [--enable | --disable]
    [--project <project>]
    [--description <description>]
    [--mtu <mtu>]
    [--project-domain <project-domain>]
    [--availability-zone-hint <availability-zone>]
    [--enable-port-security | --disable-port-security]
    [--external | --internal]
    [--default | --no-default]
    [--qos-policy <qos-policy>]
    [--transparent-vlan | --no-transparent-vlan]
    [--provider-network-type <provider-network-type>]
    [--provider-physical-network <provider-physical-network>]
    [--provider-segment <provider-segment>]
    [--dns-domain <dns-domain>]
    [--tag <tag> | --no-tag]
    --subnet <subnet>
    <name>

--extra-property type=<property_type>,name=<property_name>,value=<property_value>¶

Additional parameters can be passed using this property. Default type of the extra property is string (‘str’), but other types can be used as well. Available types are: ‘dict’, ‘list’, ‘str’, ‘bool’, ‘int’. In case of ‘list’ type, ‘value’ can be semicolon-separated list of values. For ‘dict’ value is semicolon-separated list of the key:value pairs.

--share¶

Share the network between projects

--no-share¶

Do not share the network between projects

--enable¶

Enable network (default)

Network version 2 only

--disable¶

Disable network

Network version 2 only

--project <project>¶

Owner’s project (name or ID)

Network version 2 only

--description <description>¶

Set network description

Network version 2 only

--mtu <mtu>¶

Set network mtu

Network version 2 only

--project-domain <project-domain>¶

Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

--availability-zone-hint <availability-zone>¶

Availability Zone in which to create this network (Network Availability Zone extension required, repeat option to set multiple availability zones)

Network version 2 only

--enable-port-security¶

Enable port security by default for ports created on this network (default)

Network version 2 only

--disable-port-security¶

Disable port security by default for ports created on this network

Network version 2 only

--external¶

Set this network as an external network (external-net extension required)

Network version 2 only

--internal¶

Set this network as an internal network (default)

Network version 2 only

--default¶

Specify if this network should be used as the default external network

Network version 2 only

--no-default¶

Do not use the network as the default external network (default)

Network version 2 only

--qos-policy <qos-policy>¶

QoS policy to attach to this network (name or ID)

Network version 2 only

--transparent-vlan¶

Make the network VLAN transparent

Network version 2 only

--no-transparent-vlan¶

Do not make the network VLAN transparent

Network version 2 only

--provider-network-type <provider-network-type>¶

The physical mechanism by which the virtual network is implemented. For example: flat, geneve, gre, local, vlan, vxlan.

--provider-physical-network <provider-physical-network>¶

Name of the physical network over which the virtual network is implemented

--provider-segment <provider-segment>¶

VLAN ID for VLAN networks or Tunnel ID for GENEVE/GRE/VXLAN networks

--dns-domain <dns-domain>¶

Set DNS domain for this network (requires DNS integration extension)

--tag <tag>¶

Tag to be added to the network (repeat option to set multiple tags)

Network version 2 only

--no-tag¶

No tags associated with the network

Network version 2 only

--subnet <subnet>¶

IPv4 subnet for fixed IPs (in CIDR notation)

Compute version 2 only

name¶

New network name

network delete¶

Delete network(s)

openstack network delete <network> [<network> ...]

network¶

Network(s) to delete (name or ID)

network list¶

List networks

openstack network list
    [--format-config-file FORMAT_CONFIG]
    [--sort-column SORT_COLUMN]
    [--sort-ascending | --sort-descending]
    [--external | --internal]
    [--long]
    [--name <name>]
    [--enable | --disable]
    [--project <project>]
    [--project-domain <project-domain>]
    [--share | --no-share]
    [--status <status>]
    [--provider-network-type <provider-network-type>]
    [--provider-physical-network <provider-physical-network>]
    [--provider-segment <provider-segment>]
    [--agent <agent-id>]
    [--tags <tag>[,<tag>,...]]
    [--any-tags <tag>[,<tag>,...]]
    [--not-tags <tag>[,<tag>,...]]
    [--not-any-tags <tag>[,<tag>,...]]

--format-config-file <FORMAT_CONFIG>¶

Config file for the dict-to-csv formatter

--sort-column SORT_COLUMN¶

specify the column(s) to sort the data (columns specified first have a priority, non-existing columns are ignored), can be repeated

--sort-ascending¶

sort the column(s) in ascending order

--sort-descending¶

sort the column(s) in descending order

--external¶

List external networks

Network version 2 only

--internal¶

List internal networks

Network version 2 only

--long¶

List additional fields in output

Network version 2 only

--name <name>¶

List networks according to their name

Network version 2 only

--enable¶

List enabled networks

Network version 2 only

--disable¶

List disabled networks

Network version 2 only

--project <project>¶

List networks according to their project (name or ID)

--project-domain <project-domain>¶

Domain the project belongs to (name or ID). This can be used in case collisions between project names exist.

Network version 2 only

--share¶

List networks shared between projects

Network version 2 only

--no-share¶

List networks not shared between projects

Network version 2 only

--status <status>¶

List networks according to their status (‘ACTIVE’, ‘BUILD’, ‘DOWN’, ‘ERROR’)

Network version 2 only

--provider-network-type <provider-network-type>¶

List networks according to their physical mechanisms. The supported options are: flat, geneve, gre, local, vlan, vxlan.

Network version 2 only

--provider-physical-network <provider-physical-network>¶

List networks according to name of the physical network

Network version 2 only

--provider-segment <provider-segment>¶

List networks according to VLAN ID for VLAN networks or Tunnel ID for GENEVE/GRE/VXLAN networks

Network version 2 only

--agent <agent-id>¶

List networks hosted by agent (ID only)

Network version 2 only

--tags <tag>[,<tag>,...]¶

List networks which have all given tag(s) (Comma-separated list of tags)

Network version 2 only

--any-tags <tag>[,<tag>,...]¶

List networks which have any given tag(s) (Comma-separated list of tags)

Network version 2 only

--not-tags <tag>[,<tag>,...]¶

Exclude networks which have all given tag(s) (Comma-separated list of tags)

Network version 2 only

--not-any-tags <tag>[,<tag>,...]¶

Exclude networks which have any given tag(s) (Comma-separated list of tags)

Network version 2 only

network set¶

Set network properties

openstack network set
    [--extra-property type=<property_type>,name=<property_name>,value=<property_value>]
    [--name <name>]
    [--enable | --disable]
    [--share | --no-share]
    [--description <description]
    [--mtu <mtu]
    [--enable-port-security | --disable-port-security]
    [--external | --internal]
    [--default | --no-default]
    [--qos-policy <qos-policy> | --no-qos-policy]
    [--tag <tag>]
    [--no-tag]
    [--provider-network-type <provider-network-type>]
    [--provider-physical-network <provider-physical-network>]
    [--provider-segment <provider-segment>]
    [--dns-domain <dns-domain>]
    <network>

--extra-property type=<property_type>,name=<property_name>,value=<property_value>¶

Additional parameters can be passed using this property. Default type of the extra property is string (‘str’), but other types can be used as well. Available types are: ‘dict’, ‘list’, ‘str’, ‘bool’, ‘int’. In case of ‘list’ type, ‘value’ can be semicolon-separated list of values. For ‘dict’ value is semicolon-separated list of the key:value pairs.

--name <name>¶

Set network name

--enable¶

Enable network

--disable¶

Disable network

--share¶

Share the network between projects

--no-share¶

Do not share the network between projects

--description <description¶

Set network description

--mtu <mtu¶

Set network mtu

--enable-port-security¶

Enable port security by default for ports created on this network

--disable-port-security¶

Disable port security by default for ports created on this network

--external¶

Set this network as an external network (external-net extension required)

--internal¶

Set this network as an internal network

--default¶

Set the network as the default external network

--no-default¶

Do not use the network as the default external network

--qos-policy <qos-policy>¶

QoS policy to attach to this network (name or ID)

--no-qos-policy¶

Remove the QoS policy attached to this network

--tag <tag>¶

Tag to be added to the network (repeat option to set multiple tags)

--no-tag¶

Clear tags associated with the network. Specify both –tag and –no-tag to overwrite current tags

--provider-network-type <provider-network-type>¶

The physical mechanism by which the virtual network is implemented. For example: flat, geneve, gre, local, vlan, vxlan.

--provider-physical-network <provider-physical-network>¶

Name of the physical network over which the virtual network is implemented

--provider-segment <provider-segment>¶

VLAN ID for VLAN networks or Tunnel ID for GENEVE/GRE/VXLAN networks

--dns-domain <dns-domain>¶

Set DNS domain for this network (requires DNS integration extension)

network¶

Network to modify (name or ID)

network show¶

Show network details

openstack network show <network>

network¶

Network to display (name or ID)

network unset¶

Unset network properties

openstack network unset
    [--extra-property type=<property_type>,name=<property_name>,value=<property_value>]
    [--tag <tag> | --all-tag]
    <network>

--extra-property type=<property_type>,name=<property_name>,value=<property_value>¶

Additional parameters can be passed using this property. Default type of the extra property is string (‘str’), but other types can be used as well. Available types are: ‘dict’, ‘list’, ‘str’, ‘bool’, ‘int’. In case of ‘list’ type, ‘value’ can be semicolon-separated list of values. For ‘dict’ value is semicolon-separated list of the key:value pairs.

--tag <tag>¶

Tag to be removed from the network (repeat option to remove multiple tags)

--all-tag¶

Clear all tags associated with the network

network¶

Network to modify (name or ID)