Working with NIfTI images

This page describes some features of the nibabel implementation of the NIfTI format. Generally all these features apply equally to the NIfTI 1 and the NIfTI 2 format, but we will note the differences when they come up. NIfTI 1 is much more common than NIfTI 2.

Preliminaries

We first set some display parameters to print out numpy arrays in a compact form:

>>> import numpy as np
>>> # Set numpy to print only 2 decimal digits for neatness
>>> np.set_printoptions(precision=2, suppress=True)

Example NIfTI images

>>> import os
>>> import nibabel as nib
>>> from nibabel.testing import data_path

This is the example NIfTI 1 image:

>>> example_ni1 = os.path.join(data_path, 'example4d.nii.gz')
>>> n1_img = nib.load(example_ni1)
>>> n1_img
<nibabel.nifti1.Nifti1Image object at ...>

Here is the NIfTI 2 example image:

>>> example_ni2 = os.path.join(data_path, 'example_nifti2.nii.gz')
>>> n2_img = nib.load(example_ni2)
>>> n2_img
<nibabel.nifti2.Nifti2Image object at ...>

The NIfTI header

The NIfTI 1 header is a small C structure of size 352 bytes. It contains the following fields:

>>> n1_header = n1_img.header
>>> print(n1_header)                     
<class 'nibabel.nifti1.Nifti1Header'> object, endian='<'
sizeof_hdr      : 348
data_type       : b''
db_name         : b''
extents         : 0
session_error   : 0
regular         : b'r'
dim_info        : 57
dim             : [  4 128  96  24   2   1   1   1]
intent_p1       : 0.0
intent_p2       : 0.0
intent_p3       : 0.0
intent_code     : none
datatype        : int16
bitpix          : 16
slice_start     : 0
pixdim          : [   -1.      2.      2.      2.2  2000.      1.      1.      1. ]
vox_offset      : 0.0
scl_slope       : nan
scl_inter       : nan
slice_end       : 23
slice_code      : unknown
xyzt_units      : 10
cal_max         : 1162.0
cal_min         : 0.0
slice_duration  : 0.0
toffset         : 0.0
glmax           : 0
glmin           : 0
descrip         : b'FSL3.3\x00 v2.25 NIfTI-1 Single file format'
aux_file        : b''
qform_code      : scanner
sform_code      : scanner
quatern_b       : -1.94510681403e-26
quatern_c       : -0.996708512306
quatern_d       : -0.081068739295
qoffset_x       : 117.855102539
qoffset_y       : -35.7229423523
qoffset_z       : -7.24879837036
srow_x          : [  -2.      0.      0.    117.86]
srow_y          : [ -0.     1.97  -0.36 -35.72]
srow_z          : [ 0.    0.32  2.17 -7.25]
intent_name     : b''
magic           : b'n+1'

The NIfTI 2 header is similar, but of length 540 bytes, with fewer fields:

>>> n2_header = n2_img.header
>>> print(n2_header)                     
    <class 'nibabel.nifti2.Nifti2Header'> object, endian='<'
    sizeof_hdr      : 540
    magic           : b'n+2'
    eol_check       : [13 10 26 10]
    datatype        : int16
    bitpix          : 16
    dim             : [ 4 32 20 12  2  1  1  1]
    intent_p1       : 0.0
    intent_p2       : 0.0
    intent_p3       : 0.0
    pixdim          : [   -1.      2.      2.      2.2  2000.      1.      1.      1. ]
    vox_offset      : 0
    scl_slope       : nan
    scl_inter       : nan
    cal_max         : 1162.0
    cal_min         : 0.0
    slice_duration  : 0.0
    toffset         : 0.0
    slice_start     : 0
    slice_end       : 23
    descrip         : b'FSL3.3\x00 v2.25 NIfTI-1 Single file format'
    aux_file        : b''
    qform_code      : scanner
    sform_code      : scanner
    quatern_b       : -1.94510681403e-26
    quatern_c       : -0.996708512306
    quatern_d       : -0.081068739295
    qoffset_x       : 117.855102539
    qoffset_y       : -35.7229423523
    qoffset_z       : -7.24879837036
    srow_x          : [  -2.      0.      0.    117.86]
    srow_y          : [ -0.     1.97  -0.36 -35.72]
    srow_z          : [ 0.    0.32  2.17 -7.25]
    slice_code      : unknown
    xyzt_units      : 10
    intent_code     : none
    intent_name     : b''
    dim_info        : 57
    unused_str      : b''

You can get and set individual fields in the header using dict (mapping-type) item access. For example:

>>> n1_header['cal_max']
array(1162., dtype=float32)
>>> n1_header['cal_max'] = 1200
>>> n1_header['cal_max']
array(1200., dtype=float32)

Check the attributes of the header for get_ / set_ methods to get and set various combinations of NIfTI header fields.

The get_ / set_ methods should check and apply valid combinations of values from the header, whereas you can do anything you like with the dict / mapping item access. It is safer to use the get_ / set_ methods and use the mapping item access only if the get_ / set_ methods will not do what you want.

The NIfTI affines

Like other nibabel image types, NIfTI images have an affine relating the voxel coordinates to world coordinates in RAS+ space:

>>> n1_img.affine
array([[ -2.  ,   0.  ,   0.  , 117.86],
       [ -0.  ,   1.97,  -0.36, -35.72],
       [  0.  ,   0.32,   2.17,  -7.25],
       [  0.  ,   0.  ,   0.  ,   1.  ]])

Unlike other formats, the NIfTI header format can specify this affine in one of three ways — the sform affine, the qform affine and the fall-back header affine.

Nibabel uses an algorithm to chose which of these three it will use for the overall image affine.

The sform affine

The header stores the three first rows of the 4 by 4 affine in the header fields srow_x, srow_y, srow_z. The header does not store the fourth row because it is always [0, 0, 0, 1] (see Coordinate systems and affines).

You can get the sform affine specifically with the get_sform() method of the image or the header.

For example:

>>> print(n1_header['srow_x'])
[ -2.     0.     0.   117.86]
>>> print(n1_header['srow_y'])
[ -0.     1.97  -0.36 -35.72]
>>> print(n1_header['srow_z'])
[ 0.    0.32  2.17 -7.25]
>>> print(n1_header.get_sform())
[[ -2.     0.     0.   117.86]
 [ -0.     1.97  -0.36 -35.72]
 [  0.     0.32   2.17  -7.25]
 [  0.     0.     0.     1.  ]]

This affine is valid only if the sform_code is not zero.

>>> print(n1_header['sform_code'])
1

The different sform code values specify which RAS+ space the sform affine refers to, with these interpretations:

Code	Label	Meaning
0	unknown	sform not defined
1	scanner	RAS+ in scanner coordinates
2	aligned	RAS+ aligned to some other scan
3	talairach	RAS+ in Talairach atlas space
4	mni	RAS+ in MNI atlas space

In our case the code is 1, meaning “scanner” alignment.

You can get the affine and the code using the coded=True argument to get_sform():

>>> print(n1_header.get_sform(coded=True))
(array([[ -2.  ,   0.  ,   0.  , 117.86],
       [ -0.  ,   1.97,  -0.36, -35.72],
       [  0.  ,   0.32,   2.17,  -7.25],
       [  0.  ,   0.  ,   0.  ,   1.  ]]), 1)

You can set the sform with the set_sform() method of the header and the image.

>>> n1_header.set_sform(np.diag([2, 3, 4, 1]))
>>> n1_header.get_sform()
array([[2., 0., 0., 0.],
       [0., 3., 0., 0.],
       [0., 0., 4., 0.],
       [0., 0., 0., 1.]])

Set the affine and code using the code parameter to set_sform():

>>> n1_header.set_sform(np.diag([3, 4, 5, 1]), code='mni')
>>> n1_header.get_sform(coded=True)
(array([[3., 0., 0., 0.],
       [0., 4., 0., 0.],
       [0., 0., 5., 0.],
       [0., 0., 0., 1.]]), 4)

The qform affine

This affine can be calculated from a combination of the voxel sizes (entries 1 through 4 of the pixdim field), a sign flip called qfac stored in entry 0 of pixdim, and a quaternion that can be reconstructed from fields quatern_b, quatern_c, quatern_d.

See the code for the get_qform() method for details.

You can get and set the qform affine using the equivalent methods to those for the sform: get_qform(), set_qform().

>>> n1_header.get_qform(coded=True)
(array([[ -2.  ,   0.  ,   0.  , 117.86],
       [ -0.  ,   1.97,  -0.36, -35.72],
       [  0.  ,   0.32,   2.17,  -7.25],
       [  0.  ,   0.  ,   0.  ,   1.  ]]), 1)

The qform also has a corresponding qform_code with the same interpretation as the sform_code.

The fall-back header affine

This is the affine of last resort, constructed only from the pixdim voxel sizes. The NIfTI specification says that this should set the first voxel in the image as [0, 0, 0] in world coordinates, but we nibabblers follow SPM in preferring to set the central voxel to have [0, 0, 0] world coordinate. The NIfTI spec also implies that the image should be assumed to be in RAS+ voxel orientation for this affine (see Coordinate systems and affines). Again like SPM, we prefer to assume LAS+ voxel orientation by default.

You can always get the fall-back affine with get_base_affine():

>>> n1_header.get_base_affine()
array([[ -2. ,   0. ,   0. , 127. ],
       [  0. ,   2. ,   0. , -95. ],
       [  0. ,   0. ,   2.2, -25.3],
       [  0. ,   0. ,   0. ,   1. ]])

Choosing the image affine

Given there are three possible affines defined in the NIfTI header, nibabel has to chose which of these to use for the image affine.

The algorithm is defined in the get_best_affine() method. It is:

1. If sform_code != 0 (‘unknown’) use the sform affine; else

2. If qform_code != 0 (‘unknown’) use the qform affine; else

3. Use the fall-back affine.

Default sform and qform codes

If you create a new image, e.g.:

>>> data = np.random.random((20, 20, 20))
>>> xform = np.eye(4) * 2
>>> img = nib.nifti1.Nifti1Image(data, xform)

The sform and qform codes will be initialised to 2 (aligned) and 0 (unknown) respectively:

>>> img.get_sform(coded=True) 
(array([[2., 0., 0., 0.],
       [0., 2., 0., 0.],
       [0., 0., 2., 0.],
       [0., 0., 0., 1.]]), 2)
>>> img.get_qform(coded=True)
(None, 0)

This is based on the assumption that the affine you specify for a newly created image will align the image to some known coordinate system. According to the NIfTI specification, the qform is intended to encode a transformation into scanner coordinates - for a programmatically created image, we have no way of knowing what the scanner coordinate system is; furthermore, the qform cannot be used to store an arbitrary affine transform, as it is unable to encode shears. So the provided affine will be stored in the sform, and the qform will be left uninitialised.

If you create a new image and specify an existing header, e.g.:

>>> example_ni1 = os.path.join(data_path, 'example4d.nii.gz')
>>> n1_img = nib.load(example_ni1)
>>> new_header = header=n1_img.header.copy()
>>> new_data = np.random.random(n1_img.shape[:3])
>>> new_img = nib.nifti1.Nifti1Image(data, None, header=new_header)

then the newly created image will inherit the same sform and qform codes that are in the provided header. However, if you create a new image with both an affine and a header specified, e.g.:

>>> xform = np.eye(4)
>>> new_img = nib.nifti1.Nifti1Image(data, xform, header=new_header)

then the sform and qform codes will only be preserved if the provided affine is the same as the affine in the provided header. If the affines do not match, the sform and qform codes will be set to their default values of 2 and 0 respectively. This is done on the basis that, if you are changing the affine, you are likely to be changing the space to which the affine is pointing. So the original sform and qform codes can no longer be assumed to be valid.

If you wish to set the sform and qform affines and/or codes to some other value, you can always set them after creation using the set_sform and set_qform methods, as described above.

Data scaling

NIfTI uses a simple scheme for data scaling.

By default, nibabel will take care of this scaling for you, but there may be times that you want to control the data scaling yourself. If so, the next section describes how the scaling works and the nibabel implementation of same.

There are two scaling fields in the header called scl_slope and scl_inter.

The output data from a NIfTI image comes from:

1. Loading the binary data from the image file;

2. Casting the numbers to the binary format given in the header and returned by get_data_dtype();

3. Reshaping to the output image shape;

4. Multiplying the result by the header scl_slope value, if both of scl_slope and scl_inter are defined;

5. Adding the value header scl_inter value to the result, if both of scl_slope and scl_inter are defined;

‘Defined’ means, the value is not NaN (not a number).

All this gets built into the array proxy when you load a NIfTI image.

When you load an image, the header scaling values automatically get set to NaN (undefined) to mark the fact that the scaling values have been consumed by the read. The scaling values read from the header on load only appear in the array proxy object.

To see how this works, let’s make a new image with some scaling:

>>> array_data = np.arange(24, dtype=np.int16).reshape((2, 3, 4))
>>> affine = np.diag([1, 2, 3, 1])
>>> array_img = nib.Nifti1Image(array_data, affine)
>>> array_header = array_img.header

The default scaling values are NaN (undefined):

>>> array_header['scl_slope']
array(nan, dtype=float32)
>>> array_header['scl_inter']
array(nan, dtype=float32)

You can get the scaling values with the get_slope_inter() method:

>>> array_header.get_slope_inter()
(None, None)

None corresponds to the NaN scaling value (undefined).

We can set them in the image header, so they get saved to the header when the image is written. We can do this by setting the fields directly, or with set_slope_inter():

>>> array_header.set_slope_inter(2, 10)
>>> array_header.get_slope_inter()
(2.0, 10.0)
>>> array_header['scl_slope']
array(2., dtype=float32)
>>> array_header['scl_inter']
array(10., dtype=float32)

Setting the scale factors in the header has no effect on the image data before we save and load again:

>>> array_img.get_fdata()
array([[[ 0.,  1.,  2.,  3.],
        [ 4.,  5.,  6.,  7.],
        [ 8.,  9., 10., 11.]],

       [[12., 13., 14., 15.],
        [16., 17., 18., 19.],
        [20., 21., 22., 23.]]])

Now we save the image and load it again:

>>> nib.save(array_img, 'scaled_image.nii')
>>> scaled_img = nib.load('scaled_image.nii')

The data array has the scaling applied:

>>> scaled_img.get_fdata()
array([[[10., 12., 14., 16.],
        [18., 20., 22., 24.],
        [26., 28., 30., 32.]],

       [[34., 36., 38., 40.],
        [42., 44., 46., 48.],
        [50., 52., 54., 56.]]])

The header for the loaded image has had the scaling reset to undefined, to mark the fact that the scaling has been “consumed” by the load:

>>> scaled_img.header.get_slope_inter()
(None, None)

The original slope and intercept are still accessible in the array proxy object:

>>> scaled_img.dataobj.slope
2.0
>>> scaled_img.dataobj.inter
10.0

If the header scaling is undefined when we save the image, nibabel will try to find an optimum slope and intercept to best preserve the precision of the data in the output data type. Because nibabel will set the scaling to undefined when loading the image, or creating a new image, this is the default behavior.