matplotlib.axes.Axes.legend¶

Axes.legend(*args, **kwargs)[source]¶

Place a legend on the axes.

Call signatures:

legend()
legend(labels)
legend(handles, labels)

The call signatures correspond to three different ways how to use this method.

1. Automatic detection of elements to be shown in the legend

The elements to be added to the legend are automatically determined, when you do not pass in any extra arguments.

In this case, the labels are taken from the artist. You can specify them either at artist creation or by calling the set_label() method on the artist:

line, = ax.plot([1, 2, 3], label='Inline label')
ax.legend()

or:

line, = ax.plot([1, 2, 3])
line.set_label('Label via method')
ax.legend()

Specific lines can be excluded from the automatic legend element selection by defining a label starting with an underscore. This is default for all artists, so calling Axes.legend without any arguments and without setting the labels manually will result in no legend being drawn.

2. Labeling existing plot elements

To make a legend for lines which already exist on the axes (via plot for instance), simply call this function with an iterable of strings, one for each legend item. For example:

ax.plot([1, 2, 3])
ax.legend(['A simple line'])

Note: This way of using is discouraged, because the relation between plot elements and labels is only implicit by their order and can easily be mixed up.

3. Explicitly defining the elements in the legend

For full control of which artists have a legend entry, it is possible to pass an iterable of legend artists followed by an iterable of legend labels respectively:

legend((line1, line2, line3), ('label1', 'label2', 'label3'))

Parameters:

handlessequence of Artist, optional

A list of Artists (lines, patches) to be added to the legend. Use this together with labels, if you need full control on what is shown in the legend and the automatic mechanism described above is not sufficient.

The length of handles and labels should be the same in this case. If they are not, they are truncated to the smaller length.

labelslist of str, optional

A list of labels to show next to the artists. Use this together with handles, if you need full control on what is shown in the legend and the automatic mechanism described above is not sufficient.

Returns:

Legend

Other Parameters:

locstr or pair of floats, default: rcParams["legend.loc"] (default: 'best') ('best' for axes, 'upper right' for figures)

The location of the legend.

The strings 'upper left', 'upper right', 'lower left', 'lower right' place the legend at the corresponding corner of the axes/figure.

The strings 'upper center', 'lower center', 'center left', 'center right' place the legend at the center of the corresponding edge of the axes/figure.

The string 'center' places the legend at the center of the axes/figure.

The string 'best' places the legend at the location, among the nine locations defined so far, with the minimum overlap with other drawn artists. This option can be quite slow for plots with large amounts of data; your plotting speed may benefit from providing a specific location.

The location can also be a 2-tuple giving the coordinates of the lower-left corner of the legend in axes coordinates (in which case bbox_to_anchor will be ignored).

For back-compatibility, 'center right' (but no other location) can also be spelled 'right', and each "string" locations can also be given as a numeric value:

Location String Location Code

'best' 0

'upper right' 1

'upper left' 2

'lower left' 3

'lower right' 4

'right' 5

'center left' 6

'center right' 7

'lower center' 8

'upper center' 9

'center' 10

bbox_to_anchorBboxBase, 2-tuple, or 4-tuple of floats

Box that is used to position the legend in conjunction with loc. Defaults to axes.bbox (if called as a method to Axes.legend) or figure.bbox (if Figure.legend). This argument allows arbitrary placement of the legend.

Bbox coordinates are interpreted in the coordinate system given by bbox_transform, with the default transform Axes or Figure coordinates, depending on which legend is called.

If a 4-tuple or BboxBase is given, then it specifies the bbox (x, y, width, height) that the legend is placed in. To put the legend in the best location in the bottom right quadrant of the axes (or figure):

loc='best', bbox_to_anchor=(0.5, 0., 0.5, 0.5)

A 2-tuple (x, y) places the corner of the legend specified by loc at x, y. For example, to put the legend's upper right-hand corner in the center of the axes (or figure) the following keywords can be used:

loc='upper right', bbox_to_anchor=(0.5, 0.5)

ncolint, default: 1

The number of columns that the legend has.

propNone or matplotlib.font_manager.FontProperties or dict

The font properties of the legend. If None (default), the current matplotlib.rcParams will be used.

fontsizeint or {'xx-small', 'x-small', 'small', 'medium', 'large', 'x-large', 'xx-large'}

The font size of the legend. If the value is numeric the size will be the absolute font size in points. String values are relative to the current default font size. This argument is only used if prop is not specified.

labelcolorstr or list

Sets the color of the text in the legend. Can be a valid color string (for example, 'red'), or a list of color strings. The labelcolor can also be made to match the color of the line or marker using 'linecolor', 'markerfacecolor' (or 'mfc'), or 'markeredgecolor' (or 'mec').

numpointsint, default: rcParams["legend.numpoints"] (default: 1)

The number of marker points in the legend when creating a legend entry for a Line2D (line).

scatterpointsint, default: rcParams["legend.scatterpoints"] (default: 1)

The number of marker points in the legend when creating a legend entry for a PathCollection (scatter plot).

scatteryoffsetsiterable of floats, default: [0.375, 0.5, 0.3125]

The vertical offset (relative to the font size) for the markers created for a scatter plot legend entry. 0.0 is at the base the legend text, and 1.0 is at the top. To draw all markers at the same height, set to [0.5].

markerscalefloat, default: rcParams["legend.markerscale"] (default: 1.0)

The relative size of legend markers compared with the originally drawn ones.

markerfirstbool, default: True

If True, legend marker is placed to the left of the legend label. If False, legend marker is placed to the right of the legend label.

frameonbool, default: rcParams["legend.frameon"] (default: True)

Whether the legend should be drawn on a patch (frame).

fancyboxbool, default: rcParams["legend.fancybox"] (default: True)

Whether round edges should be enabled around the FancyBboxPatch which makes up the legend's background.

shadowbool, default: rcParams["legend.shadow"] (default: False)

Whether to draw a shadow behind the legend.

framealphafloat, default: rcParams["legend.framealpha"] (default: 0.8)

The alpha transparency of the legend's background. If shadow is activated and framealpha is None, the default value is ignored.

facecolor"inherit" or color, default: rcParams["legend.facecolor"] (default: 'inherit')

The legend's background color. If "inherit", use rcParams["axes.facecolor"] (default: 'white').

edgecolor"inherit" or color, default: rcParams["legend.edgecolor"] (default: '0.8')

The legend's background patch edge color. If "inherit", use take rcParams["axes.edgecolor"] (default: 'black').

mode{"expand", None}

If mode is set to "expand" the legend will be horizontally expanded to fill the axes area (or bbox_to_anchor if defines the legend's size).

bbox_transformNone or matplotlib.transforms.Transform

The transform for the bounding box (bbox_to_anchor). For a value of None (default) the Axes' transAxes transform will be used.

titlestr or None

The legend's title. Default is no title (None).

title_fontsizeint or {'xx-small', 'x-small', 'small', 'medium', 'large', 'x-large', 'xx-large'}, default: rcParams["legend.title_fontsize"] (default: None)

The font size of the legend's title.

borderpadfloat, default: rcParams["legend.borderpad"] (default: 0.4)

The fractional whitespace inside the legend border, in font-size units.

labelspacingfloat, default: rcParams["legend.labelspacing"] (default: 0.5)

The vertical space between the legend entries, in font-size units.

handlelengthfloat, default: rcParams["legend.handlelength"] (default: 2.0)

The length of the legend handles, in font-size units.

handletextpadfloat, default: rcParams["legend.handletextpad"] (default: 0.8)

The pad between the legend handle and text, in font-size units.

borderaxespadfloat, default: rcParams["legend.borderaxespad"] (default: 0.5)

The pad between the axes and legend border, in font-size units.

columnspacingfloat, default: rcParams["legend.columnspacing"] (default: 2.0)

The spacing between columns, in font-size units.

handler_mapdict or None

The custom dictionary mapping instances or types to a legend handler. This handler_map updates the default handler map found at matplotlib.legend.Legend.get_legend_handler_map.

Notes

Some artists are not supported by this function. See Legend guide for details.

Examples

(Source code, png, pdf)