Network settings¶
By default, iLO interfaces will try to use DHCP for network configuration. With these functions you can inspect the network configuration and, if DHCP doesn’t quite do the right thing for you, make manual adjustments.
- class hpilo.Ilo
- get_network_settings()¶
Get the iLO network settings
>>> ilo.get_network_settings() {'dhcp_dns_server': True, 'dhcp_domain_name': True, 'dhcp_enable': True, 'dhcp_gateway': True, 'dhcp_sntp_settings': True, 'dhcp_static_route': True, 'dhcp_wins_server': True, 'dhcpv6_dns_server': True, 'dhcpv6_domain_name': False, 'dhcpv6_rapid_commit': False, 'dhcpv6_sntp_settings': True, 'dhcpv6_stateful_enable': True, 'dhcpv6_stateless_enable': True, 'dns_name': 'example-server', 'domain_name': 'int.kaarsemaker.net', 'enable_nic': True, 'full_duplex': 'Automatic', 'gateway_ip_address': '10.42.128.254', 'ilo_nic_auto_select': 'DISABLED', 'ip_address': '10.42.128.100', 'ipv6_addr_autocfg': True, 'ipv6_address': 'fe80::9eb6:54ff:fe8e:4b7c', 'ipv6_default_gateway': '::', 'ipv6_preferred_protocol': True, 'ipv6_prim_dns_server': '::', 'ipv6_reg_ddns_server': True, 'ipv6_sec_dns_server': '::', 'ipv6_static_route_1': {'addr_status': 'INACTIVE', 'ipv6_dest': '::', 'ipv6_gateway': '::', 'prefixlen': 0}, 'ipv6_static_route_2': {'addr_status': 'INACTIVE', 'ipv6_dest': '::', 'ipv6_gateway': '::', 'prefixlen': 0}, 'ipv6_static_route_3': {'addr_status': 'INACTIVE', 'ipv6_dest': '::', 'ipv6_gateway': '::', 'prefixlen': 0}, 'ipv6_ter_dns_server': '::', 'mac_address': '9c:b6:54:8e:4b:7c', 'nic_speed': 'Automatic', 'ping_gateway': True, 'prim_dns_server': '10.42.128.1', 'prim_wins_server': '0.0.0.0', 'reg_ddns_server': True, 'reg_wins_server': True, 'sec_dns_server': '0.0.0.0', 'sec_wins_server': '0.0.0.0', 'sntp_server1': '10.42.128.1', 'sntp_server2': '10.42.128.2', 'speed_autoselect': True, 'static_route_1': {'dest': '0.0.0.0', 'gateway': '0.0.0.0', 'mask': '0.0.0.0'}, 'static_route_2': {'dest': '0.0.0.0', 'gateway': '0.0.0.0', 'mask': '0.0.0.0'}, 'static_route_3': {'dest': '0.0.0.0', 'gateway': '0.0.0.0', 'mask': '0.0.0.0'}, 'subnet_mask': '255.255.255.0', 'ter_dns_server': '0.0.0.0', 'timezone': 'Atlantic/Reykjavik'}
- mod_network_settings(enable_nic=None, reg_ddns_server=None, ping_gateway=None, dhcp_domain_name=None, speed_autoselect=None, nic_speed=None, full_duplex=None, dhcp_enable=None, ip_address=None, subnet_mask=None, gateway_ip_address=None, dns_name=None, domain_name=None, dhcp_gateway=None, dhcp_dns_server=None, dhcp_wins_server=None, dhcp_static_route=None, reg_wins_server=None, prim_dns_server=None, sec_dns_server=None, ter_dns_server=None, prim_wins_server=None, sec_wins_server=None, static_route_1=None, static_route_2=None, static_route_3=None, dhcp_sntp_settings=None, sntp_server1=None, sntp_server2=None, timezone=None, enclosure_ip_enable=None, web_agent_ip_address=None, shared_network_port=None, vlan_enabled=None, vlan_id=None, shared_network_port_vlan=None, shared_network_port_vlan_id=None, ipv6_address=None, ipv6_static_route_1=None, ipv6_static_route_2=None, ipv6_static_route_3=None, ipv6_prim_dns_server=None, ipv6_sec_dns_server=None, ipv6_ter_dns_server=None, ipv6_default_gateway=None, ipv6_preferred_protocol=None, ipv6_addr_autocfg=None, ipv6_reg_ddns_server=None, dhcpv6_dns_server=None, dhcpv6_rapid_commit=None, dhcpv6_stateful_enable=None, dhcpv6_stateless_enable=None, dhcpv6_sntp_settings=None, dhcpv6_domain_name=None, ilo_nic_auto_select=None, ilo_nic_auto_snp_scan=None, ilo_nic_auto_delay=None, ilo_nic_fail_over=None, gratuitous_arp=None, ilo_nic_fail_over_delay=None, snp_port=None)¶
Configure the network settings for the iLO card. The static route arguments require dicts as arguments. The necessary keys in these dicts are dest, gateway and mask all in dotted-quad form