# Copyright (c) 2009-2011 Denis Bilenko. See LICENSE for details.
"""
Waiting for I/O completion.
"""
from __future__ import absolute_import, division, print_function
import sys
import select as __select__
from gevent.event import Event
from gevent.hub import _get_hub_noargs as get_hub
from gevent.hub import sleep as _g_sleep
from gevent._compat import integer_types
from gevent._compat import iteritems
from gevent._util import copy_globals
from gevent._util import _NONE
from errno import EINTR
_real_original_select = __select__.select
if sys.platform.startswith('win32'):
def _original_select(r, w, x, t):
# windows can't handle three empty lists, but we've always
# accepted that
if not r and not w and not x:
return ((), (), ())
return _real_original_select(r, w, x, t)
else:
_original_select = _real_original_select
# These will be replaced by copy_globals if they are defined by the
# platform. They're not defined on Windows, but we still provide
# poll() there. We only pay attention to POLLIN and POLLOUT.
POLLIN = 1
POLLPRI = 2
POLLOUT = 4
POLLERR = 8
POLLHUP = 16
POLLNVAL = 32
POLLRDNORM = 64
POLLRDBAND = 128
POLLWRNORM = 4
POLLWRBAND = 256
__implements__ = [
'select',
]
if hasattr(__select__, 'poll'):
__implements__.append('poll')
else:
__extra__ = [
'poll',
]
__all__ = ['error'] + __implements__
error = __select__.error
__imports__ = copy_globals(__select__, globals(),
names_to_ignore=__all__,
dunder_names_to_keep=())
_EV_READ = 1
_EV_WRITE = 2
def get_fileno(obj):
try:
fileno_f = obj.fileno
except AttributeError:
if not isinstance(obj, integer_types):
raise TypeError('argument must be an int, or have a fileno() method: %r' % (obj,))
return obj
else:
return fileno_f()
class SelectResult(object):
__slots__ = ()
@staticmethod
def _make_callback(ready_collection, event, mask):
def cb(fd, watcher):
ready_collection.append(fd)
watcher.close()
event.set()
cb.mask = mask
return cb
@classmethod
def _make_watchers(cls, watchers, *fd_cb):
loop = get_hub().loop
io = loop.io
MAXPRI = loop.MAXPRI
for fdlist, callback in fd_cb:
try:
for fd in fdlist:
watcher = io(get_fileno(fd), callback.mask)
watcher.priority = MAXPRI
watchers.append(watcher)
watcher.start(callback, fd, watcher)
except IOError as ex:
raise error(*ex.args)
@staticmethod
def _closeall(watchers):
for watcher in watchers:
watcher.stop()
watcher.close()
del watchers[:]
def select(self, rlist, wlist, timeout):
watchers = []
# read and write are the collected ready objects, accumulated
# by the callback. Note that we could get spurious callbacks
# if the socket is closed while we're blocked. We can't easily
# detect that (libev filters the events passed so we can't
# pass arbitrary events). After an iteration of polling for
# IO, libev will invoke all the pending IO watchers, and then
# any newly added (fed) events, and then we will invoke added
# callbacks. With libev 4.27+ and EV_VERIFY, it's critical to
# close our watcher immediately once we get an event. That
# could be the close event (coming just before the actual
# close happens), and once the FD is closed, libev will abort
# the process if we stop the watcher.
read = []
write = []
event = Event()
add_read = self._make_callback(read, event, _EV_READ)
add_write = self._make_callback(write, event, _EV_WRITE)
try:
self._make_watchers(watchers,
(rlist, add_read),
(wlist, add_write))
event.wait(timeout=timeout)
return read, write, []
finally:
self._closeall(watchers)
[docs]def select(rlist, wlist, xlist, timeout=None): # pylint:disable=unused-argument
"""An implementation of :meth:`select.select` that blocks only the current greenlet.
.. caution:: *xlist* is ignored.
.. versionchanged:: 1.2a1
Raise a :exc:`ValueError` if timeout is negative. This matches Python 3's
behaviour (Python 2 would raise a ``select.error``). Previously gevent had
undefined behaviour.
.. versionchanged:: 1.2a1
Raise an exception if any of the file descriptors are invalid.
"""
if timeout is not None and timeout < 0:
# Raise an error like the real implementation; which error
# depends on the version. Python 3, where select.error is OSError,
# raises a ValueError (which makes sense). Older pythons raise
# the error from the select syscall...but we don't actually get there.
# We choose to just raise the ValueError as it makes more sense and is
# forward compatible
raise ValueError("timeout must be non-negative")
# First, do a poll with the original select system call. This is
# the most efficient way to check to see if any of the file
# descriptors have previously been closed and raise the correct
# corresponding exception. (Because libev tends to just return
# them as ready, or, if built with EV_VERIFY >= 2 and libev >=
# 4.27, crash the process. And libuv also tends to crash the
# process.)
#
# We accept the *xlist* here even though we can't
# below because this is all about error handling.
sel_results = ((), (), ())
try:
sel_results = _original_select(rlist, wlist, xlist, 0)
except error as e:
enumber = getattr(e, 'errno', None) or e.args[0]
if enumber != EINTR:
# Ignore interrupted syscalls
raise
if sel_results[0] or sel_results[1] or sel_results[2] or (timeout is not None and timeout == 0):
# If we actually had stuff ready, go ahead and return it. No need
# to go through the trouble of doing our own stuff.
# Likewise, if the timeout is 0, we already did a 0 timeout
# select and we don't need to do it again. Note that in libuv,
# zero duration timers may be called immediately, without
# cycling the event loop at all. 2.7/test_telnetlib.py "hangs"
# calling zero-duration timers if we go to the loop here.
# However, because this is typically a place where scheduling switches
# can occur, we need to make sure that's still the case; otherwise a single
# consumer could monopolize the thread. (shows up in test_ftplib.)
_g_sleep()
return sel_results
result = SelectResult()
return result.select(rlist, wlist, timeout)
class PollResult(object):
__slots__ = ('events', 'event')
def __init__(self):
self.events = set()
self.event = Event()
def add_event(self, events, fd):
if events < 0:
result_flags = POLLNVAL
else:
result_flags = 0
if events & _EV_READ:
result_flags = POLLIN
if events & _EV_WRITE:
result_flags |= POLLOUT
self.events.add((fd, result_flags))
self.event.set()
[docs]class poll(object):
"""
An implementation of :class:`select.poll` that blocks only the current greenlet.
.. caution:: ``POLLPRI`` data is not supported.
.. versionadded:: 1.1b1
.. versionchanged:: 1.5
This is now always defined, regardless of whether the standard library
defines :func:`select.poll` or not. Note that it may have different performance
characteristics.
"""
def __init__(self):
# {int -> flags}
# We can't keep watcher objects in here because people commonly
# just drop the poll object when they're done, without calling
# unregister(). dnspython does this.
self.fds = {}
self.loop = get_hub().loop
def register(self, fd, eventmask=_NONE):
if eventmask is _NONE:
flags = _EV_READ | _EV_WRITE
else:
flags = 0
if eventmask & POLLIN:
flags = _EV_READ
if eventmask & POLLOUT:
flags |= _EV_WRITE
# If they ask for POLLPRI, we can't support
# that. Should we raise an error?
fileno = get_fileno(fd)
self.fds[fileno] = flags
def modify(self, fd, eventmask):
self.register(fd, eventmask)
def _get_started_watchers(self, watcher_cb):
watchers = []
io = self.loop.io
MAXPRI = self.loop.MAXPRI
try:
for fd, flags in iteritems(self.fds):
watcher = io(fd, flags)
watchers.append(watcher)
watcher.priority = MAXPRI
watcher.start(watcher_cb, fd, pass_events=True)
except:
for awatcher in watchers:
awatcher.stop()
awatcher.close()
raise
return watchers
[docs] def poll(self, timeout=None):
"""
poll the registered fds.
.. versionchanged:: 1.2a1
File descriptors that are closed are reported with POLLNVAL.
.. versionchanged:: 1.3a2
Under libuv, interpret *timeout* values less than 0 the same as *None*,
i.e., block. This was always the case with libev.
"""
result = PollResult()
watchers = self._get_started_watchers(result.add_event)
try:
if timeout is not None:
if timeout < 0:
# The docs for python say that an omitted timeout,
# a negative timeout and a timeout of None are all
# supposed to block forever. Many, but not all
# OS's accept any negative number to mean that. Some
# OS's raise errors for anything negative but not -1.
# Python 3.7 changes to always pass exactly -1 in that
# case from selectors.
# Our Timeout class currently does not have a defined behaviour
# for negative values. On libuv, it uses a check watcher and effectively
# doesn't block. On libev, it seems to block. In either case, we
# *want* to block, so turn this into the sure fire block request.
timeout = None
elif timeout:
# The docs for poll.poll say timeout is in
# milliseconds. Our result objects work in
# seconds, so this should be *=, shouldn't it?
timeout /= 1000.0
result.event.wait(timeout=timeout)
return list(result.events)
finally:
for awatcher in watchers:
awatcher.stop()
awatcher.close()
[docs] def unregister(self, fd):
"""
Unregister the *fd*.
.. versionchanged:: 1.2a1
Raise a `KeyError` if *fd* was not registered, like the standard
library. Previously gevent did nothing.
"""
fileno = get_fileno(fd)
del self.fds[fileno]
def _gevent_do_monkey_patch(patch_request):
aggressive = patch_request.patch_kwargs['aggressive']
patch_request.default_patch_items()
if aggressive:
# since these are blocking we're removing them here. This makes some other
# modules (e.g. asyncore) non-blocking, as they use select that we provide
# when none of these are available.
patch_request.remove_item(
'epoll',
'kqueue',
'kevent',
'devpoll',
)