Tool 95: TCP remote administration client (get file)

Description:

  This tool get a file from server of tool 93.
  
  Parameter --file contains the remote filename.
  Parameter --dst-file defines the local filename to write.
  Parameter --password defines the password (same as server's password).
  Parameter --cypher defines if data has to be encrypted. Please note
  this is not very strong. If known text is used, this algorithm can be
  cracked.
  Parameter --dst-ip is the address of remote host/server.
  Parameter --dst-port is the port number where to connect.
  Optional parameter --src-ip defines the local IP address to use.
  Optional parameter --src-port defines the local port number to use.
  Optional parameter --ip4opts permits to add IP4 options encoded as
  mixed.
  Optional parameter --ip6exts permits to add IP6 options encoded as
  mixed (first byte is the next header number).
  Optional parameters --device, --src-eth and --dst-eth permits to
  create a virtual client using fake addresses (in this case, tool have
  to be run with admin privilege in order to sniff and spoof at
  Ethernet level).

Usage:

netwox 95 -i ip -p port -f file [-F file] [-w password] [-d device] [-E eth] [-e eth] [-I ip] [-P port] [-o ip4opts] [-O ip6exts] [-x|+x] [-T uint32]

Parameters:

parameter	description	example
`-i\|--dst-ip ip`	destination IP address	5.6.7.8
`-p\|--dst-port port`	destination port number	80
`-f\|--file file`	filename	file.txt
`-F\|--dst-file file`	destination filename	dstfile.txt
`-w\|--password password`	password	netwox
`-d\|--device device`	device name	Eth0
`-E\|--src-eth eth`	source ethernet address	0:2:3:4:5:6
`-e\|--dst-eth eth`	destination ethernet address	0:8:9:a:b:c
`-I\|--src-ip ip`	source IP address	192.168.100.200
`-P\|--src-port port`	source port number	0
`-o\|--ip4opts ip4opts`	IPv4 options
`-O\|--ip6exts ip6exts`	IPv6 extensions
`-x\|--cypher\|+x\|--no-cypher`	if data is encrypted
`-T\|--timeout uint32`	timeout in seconds	100

Examples:

netwox 95 -i "5.6.7.8" -p "80" -f "file.txt"

netwox 95 --dst-ip "5.6.7.8" --dst-port "80" --file "file.txt"