Tool 68: Scan TCP (EthIp spoof)

Description:

  This tool checks if several TCP ports are open on host.
  This tool sends a TCP SYN to a computer. If host permits TCP, it will
  send back a TCP SYN-ACK (if port is open), or a TCP RST (if port is
  closed).
  This tool also permits to use fake Ethernet and IP addresses.
  
  This tool may need to be run with admin privilege in order to sniff
  and spoof.

Synonyms:

nmap

Usage:

netwox 68 -i ips -p ports [-d device] [-E eth] [-I ip] [-m uint32] [-M uint32] [-u|+u] [-n uint32]

Parameters:

parameter	description	example
`-i\|--ips ips`	list/range of IP addresses	1.2.3.4,5.6.7.8
`-p\|--ports ports`	list/range of port number	all
`-d\|--device device`	spoof device	Eth0
`-E\|--src-eth eth`	source ethernet address	0:a:a:a:a:a
`-I\|--src-ip ip`	source IP address	1.2.3.4
`-m\|--min-ms uint32`	min millisecond delay between packets	0
`-M\|--max-ms uint32`	max millisecond wait for answers	5000
`-u\|--disp-useful\|+u\|--no-disp-useful`	only display useful info
`-n\|--numtargets uint32`	number of simultaneous targets	20

Examples:

netwox 68 -i "1.2.3.4,5.6.7.8" -p "all"

netwox 68 --ips "1.2.3.4,5.6.7.8" --ports "all"