Tool 66: Scan ICMP (EthIP spoof)
Description:
This tool checks if several hosts are up.
This tool sends an ICMP Echo Request to a computer. If host is up and
permitting ping, it will send back an ICMP Echo Reply.
This tool also permits to use fake Ethernet and IP addresses.
This tool may need to be run with admin privilege in order to sniff
and spoof.
Synonyms:
nmap
Usage:
netwox 66 -i ips [-d device] [-E eth] [-I ip] [-m uint32] [-M uint32] [-u|+u] [-n uint32]
Parameters:
| parameter |
description |
example |
| -i|--ips ips |
list/range of IP addresses |
1.2.3.4,5.6.7.8 |
| -d|--device device |
spoof device |
Eth0 |
| -E|--src-eth eth |
source ethernet address |
0:a:a:a:a:a |
| -I|--src-ip ip |
source IP address |
1.2.3.4 |
| -m|--min-ms uint32 |
min millisecond delay between packets |
0 |
| -M|--max-ms uint32 |
max millisecond wait for answers |
5000 |
| -u|--disp-useful|+u|--no-disp-useful |
only display useful info |
|
| -n|--numtargets uint32 |
number of simultaneous targets |
20 |
Examples:
netwox 66 -i "1.2.3.4,5.6.7.8"
netwox 66 --ips "1.2.3.4,5.6.7.8"