Tool 56: Ping ARP (EthIp spoof)
Description:
This tool checks if a host is up. It's done sending a probe packet and
expecting a reply.
This tool sends an ARP request. If host is up, it will send back an
ARP Reply.
This tool also permits to use fake Ethernet and IP addresses.
This tool may need to be run with admin privilege in order to sniff
and spoof.
Usage:
netwox 56 -i ip [-d device] [-E eth] [-e eth] [-I ip] [-c uint32] [-m uint32] [-b|+b] [-1|+1]
Parameters:
| parameter |
description |
example |
| -i|--dst-ip ip |
destination IP address |
5.6.7.8 |
| -d|--device device |
spoof device |
Eth0 |
| -E|--src-eth eth |
source ethernet address |
0:a:a:a:a:a |
| -e|--dst-eth eth |
destination ethernet address |
0:b:b:b:b:b |
| -I|--src-ip ip |
source IP address |
1.2.3.4 |
| -c|--max-count uint32 |
max requests |
4294967295 |
| -m|--max-ms uint32 |
max millisecond wait |
1000 |
| -b|--beep|+b|--no-beep |
beep if reached |
|
| -1|--display01|+1|--no-display01 |
display only 0 or 1 |
|
Examples:
netwox 56 -i "5.6.7.8"
netwox 56 --dst-ip "5.6.7.8"