Tool 198: SMB/CIFS client: list shares

Description:

  This tool is a simple SMB/CIFS client listing shares.
  
  Parameter --dst-ip is the address of remote host/server.
  Parameter --dst-port is the port number where to connect.
  Optional parameter --src-ip defines the local IP address to use.
  Optional parameter --src-port defines the local port number to use.
  Optional parameter --ip4opts permits to add IP4 options encoded as
  mixed.
  Optional parameter --ip6exts permits to add IP6 options encoded as
  mixed (first byte is the next header number).
  Optional parameters --device, --src-eth and --dst-eth permits to
  create a virtual client using fake addresses (in this case, tool have
  to be run with admin privilege in order to sniff and spoof at
  Ethernet level).
  
  Parameter --user indicates the optional username.
  Parameter --password indicates the optional password.
  Parameter --authversion defines the authentication protocol to use
  (0=Lanman, 1=NTLMv1, 2=NTLMv2, unset=guess(try NTLMv2, then NTLMv1,
  and finally Lanman)).
  Parameter --netbiosname defines the NetBIOS name of server. It is
  generally the same as its DNS name. Most of the time, it is not
  needed.
  Parameter --verbose displays activity (set it if a problem occurs).
  Parameter --debug displays packets to screen.

Synonyms:

smbclient

Usage:

netwox 198 -i ip [-u login] [-w password] [-N netbiosname] [-d device] [-E eth] [-e eth] [-I ip] [-P port] [-p port] [-o ip4opts] [-O ip6exts] [-v uint32] [-T uint32] [-V|+V] [-D|+D]

Parameters:

parameter	description	example
`-i\|--dst-ip ip`	destination IP address	5.6.7.8
`-u\|--user login`	username
`-w\|--password password`	password
`-N\|--netbiosname netbiosname`	server NetBIOS NAME
`-d\|--device device`	device name	Eth0
`-E\|--src-eth eth`	source ethernet address	0:2:3:4:5:6
`-e\|--dst-eth eth`	destination ethernet address	0:8:9:a:b:c
`-I\|--src-ip ip`	source IP address	192.168.100.200
`-P\|--src-port port`	source port number	0
`-p\|--dst-port port`	destination port number	139
`-o\|--ip4opts ip4opts`	IPv4 options
`-O\|--ip6exts ip6exts`	IPv6 extensions
`-v\|--authversion uint32`	0=Lanman, 1=NTLMv1, 2=NTLMv2, unset=best	2
`-T\|--timeout uint32`	timeout in milliseconds	60000
`-V\|--verbose\|+V\|--no-verbose`	display SMB trace
`-D\|--debug\|+D\|--no-debug`	display SMB packets

Examples:

netwox 198 -i "5.6.7.8"

netwox 198 --dst-ip "5.6.7.8"