Tool 165: TFTP client : get a file

Description:

  This tool retrieves a file located on a TFTP server.
  
  Parameter --dst-ip is the address of remote host/server.
  Parameter --dst-port is the port number where to connect.
  Optional parameter --src-ip defines the local IP address to use.
  Optional parameter --src-port defines the local port number to use.
  Optional parameter --ip4opts permits to add IP4 options encoded as
  mixed.
  Optional parameter --ip6exts permits to add IP6 options encoded as
  mixed (first byte is the next header number).
  Optional parameters --device, --src-eth and --dst-eth permits to
  create a virtual client using fake addresses (in this case, tool have
  to be run with admin privilege in order to sniff and spoof at
  Ethernet level).

Synonyms:

download

Usage:

netwox 165 -i ip -F file -f file [-d device] [-E eth] [-e eth] [-I ip] [-P port] [-p port] [-o ip4opts] [-O ip6exts] [-m data] [-T uint32] [-R uint32]

Parameters:

parameter	description	example
`-i\|--dst-ip ip`	destination IP address	5.6.7.8
`-F\|--remote-file file`	remote file	/etc/passwd
`-f\|--local-file file`	local file	passwd_copy
`-d\|--device device`	device name	Eth0
`-E\|--src-eth eth`	source ethernet address	0:2:3:4:5:6
`-e\|--dst-eth eth`	destination ethernet address	0:8:9:a:b:c
`-I\|--src-ip ip`	source IP address	192.168.100.200
`-P\|--src-port port`	source port number	0
`-p\|--dst-port port`	destination port number	69
`-o\|--ip4opts ip4opts`	IPv4 options
`-O\|--ip6exts ip6exts`	IPv6 extensions
`-m\|--mode data`	mode (octet or netascii)	octet
`-T\|--timeout uint32`	timeout in milliseconds	10000
`-R\|--retry uint32`	number of retry	3

Examples:

netwox 165 -i "5.6.7.8" -F "/etc/passwd" -f "passwd_copy"

netwox 165 --dst-ip "5.6.7.8" --remote-file "/etc/passwd" --local-file "passwd_copy"