Tool 159: SNMP Get

Description:

  This tool requests a GET on a SNMP server. It permits to retrieve the
  value of one item.
  
  Parameter --oid is the oid to query. An oid is for example
  '.1.3.6.1.2.1.1.4.0'.
  
  Parameter --version defines SNMP version to use (from 1 to 3).
  Versions 1 and 2 need --community parameter to set community name.
  Version 3 requires --username and --password. Parameter --authmd5
  indicates if md5 authentication is used. Parameters
  --authoritativeengineid, --authoritativeengineboots,
  --authoritativeenginetime, --contextengineid and --contextname are
  optional version 3 parameters.
  Parameter --display shows packets.
  
  Parameter --dst-ip is the address of remote host/server.
  Parameter --dst-port is the port number where to connect.
  Optional parameter --src-ip defines the local IP address to use.
  Optional parameter --src-port defines the local port number to use.
  Optional parameter --ip4opts permits to add IP4 options encoded as
  mixed.
  Optional parameter --ip6exts permits to add IP6 options encoded as
  mixed (first byte is the next header number).
  Optional parameters --device, --src-eth and --dst-eth permits to
  create a virtual client using fake addresses (in this case, tool have
  to be run with admin privilege in order to sniff and spoof at
  Ethernet level).

Synonyms:

snmpget

Usage:

netwox 159 -i ip [-c password] -q oid [-d device] [-E eth] [-e eth] [-I ip] [-P port] [-p port] [-o ip4opts] [-O ip6exts] [-v uint32] [-m|+m] [-u login] [-w password] [-A mixed_data] [-B uint32] [-M uint32] [-C mixed_data] [-N data] [-T uint32] [-y|+y]

Parameters:

parameter	description	example
`-i\|--dst-ip ip`	destination IP address	5.6.7.8
`-c\|--community password`	SNMPv1/v2 community	public
`-q\|--oid oid`	OID to query	.1.3.6.1.2.1.1.4.0
`-d\|--device device`	device name	Eth0
`-E\|--src-eth eth`	source ethernet address	0:2:3:4:5:6
`-e\|--dst-eth eth`	destination ethernet address	0:8:9:a:b:c
`-I\|--src-ip ip`	source IP address	192.168.100.200
`-P\|--src-port port`	source port number	0
`-p\|--dst-port port`	destination port number	161
`-o\|--ip4opts ip4opts`	IPv4 options
`-O\|--ip6exts ip6exts`	IPv6 extensions
`-v\|--version uint32`	SNMP version (1, 2 or 3)	1
`-m\|--md5auth\|+m\|--no-md5auth`	SNMPv3 auth using MD5	This boolean is set. Use + or --no- to unset it.
`-u\|--username login`	SNMPv3 username
`-w\|--password password`	SNMPv3 password
`-A\|--authoritativeengineid mixed_data`	SNMPv3 authoritativeengineid
`-B\|--authoritativeengineboots uint32`	SNMPv3 authoritativeengineboots	0
`-M\|--authoritativeenginetime uint32`	SNMPv3 authoritativeenginetime	0
`-C\|--contextengineid mixed_data`	SNMPv3 contextengineid
`-N\|--contextname data`	SNMPv3 contextname
`-T\|--timeout uint32`	timeout in ms	10000
`-y\|--display\|+y\|--no-display`	display packets

Examples:

netwox 159 -i "5.6.7.8" -q ".1.3.6.1.2.1.1.4.0"

netwox 159 --dst-ip "5.6.7.8" --oid ".1.3.6.1.2.1.1.4.0"