Tool 149: Ping ICMP6 Neighbor Discovery (EthIp spoof)
Description:
This tool checks if a host is up. It's done sending a probe packet and
expecting a reply.
This tool sends an ICMP6 Neighbor Discovery request. If host is up, it
will send back a Neighbor Discovery Reply.
This tool also permits to use fake Ethernet and IP addresses.
This tool may need to be run with admin privilege in order to sniff
and spoof.
Synonyms:
ip6
Usage:
netwox 149 -i ip [-d device] [-E eth] [-e eth] [-I ip] [-c uint32] [-m uint32] [-b|+b] [-1|+1]
Parameters:
| parameter |
description |
example |
| -i|--dst-ip ip |
destination IPv6 address |
fec0:0:0:1::2 |
| -d|--device device |
spoof device |
Eth0 |
| -E|--src-eth eth |
source ethernet address |
0:a:a:a:a:a |
| -e|--dst-eth eth |
destination ethernet address |
0:b:b:b:b:b |
| -I|--src-ip ip |
source IP address |
1.2.3.4 |
| -c|--max-count uint32 |
max requests |
4294967295 |
| -m|--max-ms uint32 |
max millisecond wait |
1000 |
| -b|--beep|+b|--no-beep |
beep if reached |
|
| -1|--display01|+1|--no-display01 |
display only 0 or 1 |
|
Examples:
netwox 149 -i "fec0:0:0:1::2"
netwox 149 --dst-ip "fec0:0:0:1::2"