Tool 130: Brute force ftp client

Description:

  This tool successively tries couples of login and passwords in order
  to find matching authentication credentials.
  
  Parameter --login defines the logins to try. To check several logins,
  parameter --login-file is the file containing logins (one per line).
  Parameter --password-file is the file containing passwords (1/line).
  Parameter --stopatfirst indicates to stop when first match is found.
  Parameter --numthread defines the number of threads (simultaneous
  running checks) to use.
  Parameter --dst-ip is the address of remote host/server.
  Parameter --dst-port is the port number where to connect.
  Optional parameter --src-ip defines the local IP address to use.
  Optional parameter --src-port defines the local port number to use.
  Optional parameter --ip4opts permits to add IP4 options encoded as
  mixed.
  Optional parameter --ip6exts permits to add IP6 options encoded as
  mixed (first byte is the next header number).
  Optional parameters --device, --src-eth and --dst-eth permits to
  create a virtual client using fake addresses (in this case, tool have
  to be run with admin privilege in order to sniff and spoof at
  Ethernet level).

Usage:

netwox 130 -i ip [-L login] -w file [-d device] [-E eth] [-e eth] [-I ip] [-P port] [-p port] [-o ip4opts] [-O ip6exts] [-l file] [-T uint32] [-s|+s] [-n uint32] [-v|+v]

Parameters:

parameter	description	example
`-i\|--dst-ip ip`	destination IP address	5.6.7.8
`-L\|--login login`	login
`-w\|--password-file file`	password file	passwordfile.txt
`-d\|--device device`	device name	Eth0
`-E\|--src-eth eth`	source ethernet address	0:2:3:4:5:6
`-e\|--dst-eth eth`	destination ethernet address	0:8:9:a:b:c
`-I\|--src-ip ip`	source IP address	192.168.100.200
`-P\|--src-port port`	source port number	0
`-p\|--dst-port port`	destination port number	21
`-o\|--ip4opts ip4opts`	IPv4 options
`-O\|--ip6exts ip6exts`	IPv6 extensions
`-l\|--login-file file`	login file	loginfile.txt
`-T\|--timeout uint32`	timeout in milliseconds	60000
`-s\|--stopatfirst\|+s\|--no-stopatfirst`	stop at first valid login found
`-n\|--numthread uint32`	number of threads to launch	5
`-v\|--verbose\|+v\|--no-verbose`	be verbose	This boolean is set. Use + or --no- to unset it.

Examples:

netwox 130 -i "5.6.7.8" -w "passwordfile.txt"

netwox 130 --dst-ip "5.6.7.8" --password-file "passwordfile.txt"