Tool 111: FTP listing a directory

Description:

  This tool lists the content of a FTP server directory.
  
  Parameters --user and --pass defines the username and password.
  FTP protocol can use Active or Passive transfers. Parameter --passive
  activates a passive transfer (by default, it's active).
  Parameter --dir is the remote FTP directory name to list.
  Parameter --dst-ip is the address of remote host/server.
  Parameter --dst-port is the port number where to connect.
  Optional parameter --src-ip defines the local IP address to use.
  Optional parameter --src-port defines the local port number to use.
  Optional parameter --ip4opts permits to add IP4 options encoded as
  mixed.
  Optional parameter --ip6exts permits to add IP6 options encoded as
  mixed (first byte is the next header number).
  Optional parameters --device, --src-eth and --dst-eth permits to
  create a virtual client using fake addresses (in this case, tool have
  to be run with admin privilege in order to sniff and spoof at
  Ethernet level).

Usage:

netwox 111 -i ip [-u login] [-a password] [-V|+V] -D dir [-d device] [-E eth] [-e eth] [-I ip] [-P port] [-p port] [-o ip4opts] [-O ip6exts] [-T uint32]

Parameters:

parameter	description	example
`-i\|--dst-ip ip`	destination IP address	5.6.7.8
`-u\|--user login`	username	anonymous
`-a\|--pass password`	password	user@
`-V\|--passive\|+V\|--no-passive`	passive
`-D\|--dir dir`	directory name	/etc/
`-d\|--device device`	device name	Eth0
`-E\|--src-eth eth`	source ethernet address	0:2:3:4:5:6
`-e\|--dst-eth eth`	destination ethernet address	0:8:9:a:b:c
`-I\|--src-ip ip`	source IP address	192.168.100.200
`-P\|--src-port port`	source port number	0
`-p\|--dst-port port`	destination port number	21
`-o\|--ip4opts ip4opts`	IPv4 options
`-O\|--ip6exts ip6exts`	IPv6 extensions
`-T\|--timeout uint32`	timeout in milliseconds	60000

Examples:

netwox 111 -i "5.6.7.8" -D "/etc/"

netwox 111 --dst-ip "5.6.7.8" --dir "/etc/"