Tool 110: Ethernet bridge limiting flow

Description:

  This tool is an Ethernet bridge. It has to be run on a computer having
  two network cards. This computer cuts the network in two. It permits
  to limit the flow. This can be used to simulate a slow network in
  order to test an application.
  A --max12 or --max21 of 0 means no limitation.
  
  This tool may need to be run with admin privilege in order to sniff
  and spoof.

Usage:

netwox 110 -d device -D device [-m uint32] [-M uint32] [-v|+v]

Parameters:

parameter	description	example
`-d\|--device1 device`	first device	Eth0
`-D\|--device2 device`	second device	Eth0
`-m\|--max12 uint32`	max byte/sec from 1 to 2	0
`-M\|--max21 uint32`	max byte/sec from 2 to 1	0
`-v\|--verbose\|+v\|--no-verbose`	verbose	This boolean is set. Use + or --no- to unset it.

Examples:

netwox 110 -d "Eth0" -D "Eth0"

netwox 110 --device1 "Eth0" --device2 "Eth0"