Tool 1: Display network configuration

Description:

  This tool displays network configuration:
   - the list of devices/interfaces:
      + nu: device number
      + dev: easy device name
      + eth_hw: Ethernet address or hardware type (if not Ethernet)
      + mtu: MTU (maximum size of packets)
      + real_dev: real device name
   - the list of IP addresses:
      + nu: device number of device associated to this address
      + ip: IP address
      + netmask: network mask
      + ppp: if true(1), this address is a Point To Point
      + ppp_with: if ppp, this is the address of remote endpoint
   - the IP4 ARP cache or IP6 neighbor (this contains Ethernet
     addresses for other computers)
      + nu: device number of device associated to this entry
      + eth: Ethernet address of computer
      + ip: IP address of computer
   - the routes
      + nu: device number of device associated to this entry
      + destination/netmask: destination addresses
      + source: source IP address, or local for a local route
      + gateway: gateway (first router) to use
      + metric: metric of route
  
  Parameter --device ask to display devices list.
  Parameter --ip ask to display ip list.
  Parameter --arpcache ask to display ARP cache and neighbors.
  Parameter --routes ask to display routes list.
  If no Parameter is set, they are all displayed.
  
  This tool may need to be run with admin privilege in order to obtain
  full network configuration.

Synonyms:

address, arp, device, gateway, ifconfig, interface, ipconfig, mac, neighbor, netmask, route, show

Usage:

netwox 1 [-d|+d] [-i|+i] [-a|+a] [-r|+r]

Parameters:

parameter	description	example
`-d\|--devices\|+d\|--no-devices`	display devices
`-i\|--ip\|+i\|--no-ip`	display ip addresses
`-a\|--arpcache\|+a\|--no-arpcache`	display arp cache and neighbors
`-r\|--routes\|+r\|--no-routes`	display routes

Example:

netwox 1