curs_slk(3x) curs_slk(3x)
slk_init, slk_set, slk_wset, slk_refresh, slk_noutrefresh, slk_label,
slk_clear, slk_restore, slk_touch, slk_attron, slk_attrset,
slk_attroff, slk_attr_on, slk_attr_set, slk_attr_off, slk_attr,
slk_color, extended_slk_color - curses soft label routines
#include <curses.h>
int slk_init(int fmt);
int slk_set(int labnum, const char *label, int fmt);
int slk_wset(int labnum, const wchar_t *label, int fmt);
char *slk_label(int labnum);
int slk_refresh(void);
int slk_noutrefresh(void);
int slk_clear(void);
int slk_restore(void);
int slk_touch(void);
int slk_attron(const chtype attrs);
int slk_attroff(const chtype attrs);
int slk_attrset(const chtype attrs);
int slk_attr_on(attr_t attrs, void* opts);
int slk_attr_off(const attr_t attrs, void * opts);
int slk_attr_set(const attr_t attrs, short pair, void* opts);
/* extension */
attr_t slk_attr(void);
int slk_color(short pair);
/* extension */
int extended_slk_color(int pair);
The slk* functions manipulate the set of soft function-key labels that
exist on many terminals. For those terminals that do not have soft la-
bels, curses takes over the bottom line of stdscr, reducing the size of
stdscr and the variable LINES. curses standardizes on eight labels of
up to eight characters each. In addition to this, the ncurses imple-
mentation supports a mode where it simulates 12 labels of up to five
characters each. This is useful for PC-like enduser devices. ncurses
simulates this mode by taking over up to two lines at the bottom of the
screen; it does not try to use any hardware support for this mode.
The slk_init routine must be called before initscr or newterm is
called. If initscr eventually uses a line from stdscr to emulate the
soft labels, then fmt determines how the labels are arranged on the
screen:
0 indicates a 3-2-3 arrangement of the labels.
1 indicates a 4-4 arrangement
2 indicates the PC-like 4-4-4 mode.
3 is again the PC-like 4-4-4 mode, but in addition an index line is
generated, helping the user to identify the key numbers easily.
The slk_set routine (and the slk_wset routine for the wide-character
library) has three parameters:
labnum
is the label number, from 1 to 8 (12 if fmt in slk_init is 2 or
3);
label
is be the string to put on the label, up to eight (five if fmt
in slk_init is 2 or 3) characters in length. A null string or
a null pointer sets up a blank label.
fmt is either 0, 1, or 2, indicating whether the label is to be
left-justified, centered, or right-justified, respectively,
within the label.
The slk_label routine returns the current label for label number lab-
num, with leading and trailing blanks stripped.
The slk_refresh and slk_noutrefresh routines correspond to the wrefresh
and wnoutrefresh routines.
The slk_clear routine clears the soft labels from the screen.
The slk_restore routine restores the soft labels to the screen after a
slk_clear has been performed.
The slk_touch routine forces all the soft labels to be output the next
time a slk_noutrefresh is performed.
The slk_attron, slk_attrset, slk_attroff and slk_attr routines corre-
spond to attron, attrset, attroff and attr_get, respectively. They
have an effect only if soft labels are simulated on the bottom line of
the screen. The default highlight for soft keys is A_STANDOUT (as in
System V curses, which does not document this fact).
The slk_color routine corresponds to color_set. It has an effect only
if soft labels are simulated on the bottom line of the screen.
Because slk_color accepts only short (signed 16-bit integer) values,
this implementation provides extended_slk_color which accepts an inte-
ger value, e.g., 32-bits.
These routines return ERR upon failure and OK (SVr4 specifies only "an
integer value other than ERR") upon successful completion.
X/Open defines no error conditions. In this implementation
slk_attr
returns the attribute used for the soft keys.
slk_attroff, slk_attron, slk_clear, slk_noutrefresh, slk_refresh,
slk_touch
return an error if the terminal or the softkeys were not ini-
tialized.
slk_attrset
returns an error if the terminal or the softkeys were not ini-
tialized.
slk_attr_set
returns an error if the terminal or the softkeys were not ini-
tialized, or the color pair is outside the range 0..COL-
OR_PAIRS-1.
slk_color
returns an error if the terminal or the softkeys were not ini-
tialized, or the color pair is outside the range 0..COL-
OR_PAIRS-1.
slk_init
returns an error if the format parameter is outside the range
0..3.
slk_label
returns NULL on error.
slk_set
returns an error if the terminal or the softkeys were not ini-
tialized, or the labnum parameter is outside the range of label
counts, or if the format parameter is outside the range 0..2,
or if memory for the labels cannot be allocated.
SVr3 introduced these functions:
slk_clear
slk_init
slk_label
slk_noutrefresh
slk_refresh
slk_restore
slk_set
slk_touch
SVr4 added these functions:
slk_attroff
slk_attron
slk_attrset
slk_start
X/Open Curses added these:
slk_attr_off
slk_attr_on
slk_attr_set
slk_color
slk_wset
X/Open Curses documents the opts argument as reserved for future use,
saying that it must be null. This implementation uses that parameter
in ABI 6 for the functions which have a color-pair parameter to support
extended color pairs.
For functions which modify the color, e.g., slk_attr_set, if opts is
set it is treated as a pointer to int, and used to set the color
pair instead of the short pair parameter.
Most applications would use slk_noutrefresh because a wrefresh is like-
ly to follow soon.
The XSI Curses standard, Issue 4, described the soft-key functions,
with some differences from SVr4 curses:
o It added functions like the SVr4 attribute-manipulation functions
slk_attron, slk_attroff, slk_attrset, but which use attr_t parame-
ters (rather than chtype), along with a reserved opts parameter.
Two of these new functions (unlike the SVr4 functions) have no pro-
vision for color: slk_attr_on and slk_attr_off.
The third function (slk_attr_set) has a color-pair parameter.
o It added const qualifiers to parameters (unnecessarily), and
o It added slk_color.
Although slk_start is declared in the curses header file, it was not
documented by SVr4 other than its presence in a list of libtermlib.so.1
symbols. Reading the source code (i.e., Illumos):
o slk_start has two parameters:
o ng (number of groups) and
o gp (group pointer).
o Soft-key groups are an array of ng integers.
o In SVr4, slk_init calls slk_start passing a null for gp. For this
case, slk_start uses the number of groups ng (3 for the 3-2-3 lay-
out, 2 for the 4-4 layout) which slk_init provided.
If ng is neither 2 or 3, slk_start checks the terminfo fln (la-
bel_format) capability, interpreting that as a comma-separated list
of numbers, e.g., "3,2,3" for the 3-2-3 layout.
Finally, if there is no fln capability, slk_start returns ERR.
o If slk_start is given a non-null gp, it copies the ng elements of
the group of soft-keys, up to 16.
If there are more than 16 elements, slk_start returns an error.
o The format codes 2 and 3 for slk_init were added by ncurses in
1996. PDCurses 2.4 added this feature in 2001.
The function slk_attr was added by ncurses in 1996.
X/Open Curses does not specify a limit for the number of colors and
color pairs which a terminal can support. However, in its use of short
for the parameters, it carries over SVr4's implementation detail for
the compiled terminfo database, which uses signed 16-bit numbers. This
implementation provides extended versions of those functions which use
int parameters, allowing applications to use larger color- and pair-
numbers.
curses(3x), curs_attr(3x), curs_initscr(3x), curs_refresh(3x),
curs_variables(3x).
curs_slk(3x)