Top |
enum | MMConnectionError |
enum | MMCoreError |
enum | MMMessageError |
enum | MMMobileEquipmentError |
enum | MMSerialError |
enum | MMCdmaActivationError |
This section defines errors that may be reported when using methods from the ModemManager interface.
Common errors that may be reported by ModemManager.
Operation failed. |
||
Operation was cancelled. |
||
Operation was aborted. |
||
Operation is not supported. |
||
Cannot operate without valid plugins. |
||
Authorization is required to perform the operation. |
||
Invalid arguments given. |
||
Operation is already in progress. |
||
Operation cannot be executed in the current state. |
||
Operation cannot be executed while being connected. |
||
Too many items. |
||
Item not found. |
||
Operation cannot yet be performed, retry later. |
||
Item already exists. |
Enumeration of message errors, as defined in 3GPP TS 27.005 version 10 section 3.2.5.
ME failure. |
||
SMS service reserved. |
||
Operation not allowed. |
||
Operation not supported. |
||
Invalid PDU mode parameter. |
||
Invalid text mode parameter. |
||
SIM not inserted. |
||
SIM PIN required. |
||
PH-SIM PIN required. |
||
SIM failure. |
||
SIM busy. |
||
SIM wrong. |
||
SIM PUK required. |
||
SIM PIN2 required. |
||
SIM PUK2 required. |
||
Memory failure. |
||
Invalid index. |
||
Memory full. |
||
SMSC address unknown. |
||
No network. |
||
Network timeout. |
||
No CNMA Acknowledgement expected. |
||
Unknown error. |
Enumeration of Mobile Equipment errors, as defined in 3GPP TS 07.07 version 7.8.0.
Serial errors that may be reported by ModemManager.
Unknown serial error. |
||
Could not open the serial device. |
||
Could not write to the serial device. |
||
A response was not received on time. |
||
Could not open the serial port, no device. |
||
Could not flash the device. |
||
The serial port is not open. |
||
The serial port specific parsing failed. |
||
The serial port reported that the frame marker wasn't found (e.g. for QCDM). |
CDMA Activation errors.
No error. |
||
An error occurred. |
||
Device cannot activate while roaming. |
||
Device cannot activate on this network type (eg EVDO vs 1xRTT). |
||
Device could not connect to the network for activation. |
||
Device could not authenticate to the network for activation. |
||
Later stages of device provisioning failed. |
||
No signal available. |
||
Activation timed out. |
||
API call for initial activation failed. |