An MH Profile, in General

An introductory section gave an overview and showed a short MH profile. Here's more information and a bigger MH profile.

An MH profile entry starts with the name of a command or other parameter followed by a colon (:). If there's more one entry for a command, only the first one will be used (in MH 6.8.3, at least). If an entry is longer than one line, indent all lines except the first with space or tab character(s).

There are several kinds of entries in your MH profile:

Entries for individual MH commands, such as repl and inc. These entries start with the name of the command and a colon. The other part of each entry is one or more command-line parameters that you'd like the command to use by default. For example, the entry below tells repl first to ask you who should get copies of your reply, then to start the emacs editor:
```
      repl: -query -editor emacs
      
```
You use the same syntax for other MH commands, including the command versions explained in the Chapter New Versions of MH Commands. Lines 32-44 and lines 45-70 of the next Example are this kind.
Other entries apply to (in general) more than one MH command. For example, the following entry tells MH commands that you want to use the vi editor wherever possible:
```
      Editor: vi
      
```
Your online mh-profile(5) manual page has a list of these. See lines 1-18 of the next Example.
In most cases, those general settings are overriden by settings you make for individual MH commands. For instance, repl: -editor emacs would override a setting like Editor: vi when you use repl.
MIME message handling is different in MH and nmh:
- In MH, the mhn command handles all MIME processing. (This is mostly also true in nmh before version 1.0.) mhn can have its own profile entry (mhn:). It also uses a set of profile entries that start with mhn-, like mhn-store-text/plain:. (mhn will also read two other profiles: mhn_defaults and $MHN.)
- In nmh-1.0 and above, the commands mhbuild, mhlist, mhshow, and mhstore have replaced the does-it-all mhn command. Each has its own profile entry (mhbuild:, etc.). Each also uses a set of MIME profile entries that start with a string like mhbuild-, such as mhbuild-compose-text/plain:. (These commands will also read two other profiles: mhn.defaults for all commands, and the individual profile named in the environment variables $MHBUILD, etc.)
exmh version 1.5 uses a few MH profile entries of its own. xmh and MH-E don't have any special profile entries.
If you use both MH and front-ends (like xmh), be careful of conflicts. MH profile entries that work fine with one may cause problems with the other. The Section Conflicts Between xmh and MH Customization has some tips for xmh that you can also apply to MH-E and exmh.
The tips in that section work for other purposes too. For example, you might need a different value of showproc: or Editor: on different hosts. You could choose a different MH profile on different hosts by adding tests to your shell's login setup file (like .profile). For instance, test the hostname and set a different value for the MH environment variable on certain hosts.
You can make comments in the MH profile by typing an "impossible" command name, followed by a colon. For instance, if you don't have an MH command named comment (which you won't, unless you followed the steps for Making a New Command Version) -- you can use that as a label for comments. Another popular comment-starter is #: (a hash sign is a comment in some programming languages, the colon is required for the MH profile). You can also add other characters, like XXX, to "comment out" an existing entry. Here's one way you might make a comment, and comment out an entry:
```
      comment: this isn't working now; figure out why!
      XXXrepl: -querry
      
```
Lines 1-3, 37, and others in the Example below, show another way to make comments.
Don't leave blank (empty) lines in the MH profile.

The example below shows a highly-customized MH profile. The line numbers to the left of each line (like 12>) are not part of the file; they are for reference only. You can also grab the whole file, without the line numbers, from the book's online archive: examples/mh/misc/mh_profile.

NOTE for users of the online version of this book: This example is followed by long explanations. To avoid jumping between the example and its explanation, it's a good idea to open a new browser window to show the example. (Check your browser's menu for a command like New Web Browser or Open in New Window). Then, use the original browser to read the explanation while you view the example in the second browser window.

Example: A big MH profile

     1> #:
     2> #: First section: Overall setup for MH
     3> #:
     4> Aliasfile: aliases
     5> Alternate-Mailboxes: ehuser@*.xxx.yyy.zzz, emma@animals*,
     6>     ehuser@quack.phl.ph.com, *uucpit!ehuser
     7> Draft-Folder: drafts
     8> Folder-protect: 750
     9> Msg-protect: 640
    10> library: /usr/local/lib/mh
    11> lproc: show
    12> Path: .Mail
    13> Previous-Sequence: pseq
    14> prompter-next: vi
    15> rmmproc: /home/ehuser/.bin/rmmer
    16> Sequence-Negation: not
    17> showproc: mhl
    18> Signature: Emma H User
    19> Unseen-Sequence: unseen
    20> vi-next: spel
    21> #:
    22> #: MIME setup (Overrides mhn_defaults.  Overridden by $MHN, if any.)
    23> #:
    24> automhnproc: mhn
    25> mhn-charset-iso-2022-jp: %s | less
    26> mhn-compose-text/x-tek: |gettek
    27> mhn-private-cache: /home/ehuser/tmp/mhn-cache
    28> mhn-show-text/enriched: %prichtext -e -p '%F'
    29> mhn-show-application/postscript: %lghostview -safer '%F'
    30> mhn-storage: /home/ehuser/mhn-storage
    31> mhn-store-text/x-tek: |tekconvert '%m%P.%s'
    32> #:
    33> #: Lines for specific standard MH programs:
    34> #:
    35> anno: -inplace
    36> dist: -annotate -inplace -editor distprompter
    37> #: -nodashmunging only works if you give -filter or -format:
    38> forw: -anno -inpl -form components -format -nodash
    39> inc: -form scan.time
    40> mhl: -nobell
    41> mhn: -norealsize
    42> pick: -seq picked -list
    43> repl: -query -nocc me -annotate -inplace -editor prompter.nopre
    44> rmf: -interactive
    45> #:
    46> #: Stuff for new versions of MH programs and shell scripts:
    47> #:
    48> auto_forw_send: -draftfolder +drafts
    49> bomb: -form bombcomps -anno -inpl -editor head -query -nocc me -nocc cc
    50> checkm: -file /usr/spool/mail/ehuser -form scan.checkm -width 150
    51> cur: cur -form scan.more -width 235
    52> curlast: cur-last
    53> fo: -fast
    54> foll: -form follcomps
    55> follx: -form follcomps -filter follxfilt -editor vi
    56> l10: last:10
    57> l20: last:20
    58> l5: last:5
    59> l: last
    60> msgnums: -format %(msg)
    61> prompter.nopre: -noprepend -rapid
    62> push: -push -draftfolder +drafts -forward -verbose
    63> rapid: -rapid -prepend
    64> replx: -filter replxfilt -query -nocc me -anno -inpl -editor prompter.nopre
    65> resend: -editor resend.fixmsg
    66> #: for 'rn' replies... there's gotta be a better way!:
    67> rn-ans: -editor rn-ans.fixmsg
    68> showpr: -format 'Message %(msg)' -mhl
    69> showv: -showproc more
    70> thanks: -form thankscomps -anno -inpl -editor cat -nocc all -whatnow push

Let's take a look at some of the entries in the Example above. The file is divided into four arbitrary parts with a label block of comments above each part.

Lines 5-6 list other addresses where this user, ehuser, gets mail. It lets MH find all messages which are actually from the user. See the Section Defining Alternate Mailboxes.
Lines 8-9 set the default UNIX filesystem protections that MH will use for new folders and messages. The numbers are like the modes that chmod(1) uses. This particular protection scheme sets folders (mode 750) so that people in ehuser's group can scan them. All the messages (mode 640) will also be readable by her group. Also see the Section Sharing Other Users' Folders.
The library: entry in line 10 isn't an official part of MH. It's an entry that lets the mhparam command give the pathname of the MH library directory on your system. The section Settings from the MH Profile explains.
The signature in line 18 doesn't go at the end of mail messages; it's put in the From: header field. See the Section Signature and From:.
Lines 24-31 have most of the MIME setup commands. (These use MH syntax. As the start of this page explains, the nmh syntax changed at version 1.0.) A related entry on line 11 sets the command used when you type list at the What now? prompt.
Line 37 is a comment for the entry below it, a reminder of why the entry is written the way it is. This is a good thing to do, especially in long MH profile files.
Line 49 is a version of repl that sends a picture of a bomb with its fuse burning. (The Chapter New Versions of MH Commands explains how.) The idea and the bombcomps header template file came from the miscellany/mtrenv directory in the MH distribution. The -editor head doesn't actually edit the message; it uses the UNIX head(1) command to show the first ten lines of the draft on the screen. After that comes a What now? prompt, where you can choose a real editor if you want to.
Lines 51-52 and lines 56-60 are all versions of scan that scan different ranges of messages. For example, l10: scans the last 10 messages, and l20: scans the last 20.
Line 61 is a workaround for a common MH problem: needing to give different switches to prompter for different mail-composing commands. It's used in line 43 and line 64. See the Section Append Text with prompter.nopre.
The rmmproc: entry in line 15 uses the full pathname of a shell script that's used for removing messages. You don't always need to give full pathnames to commands -- for instance, line 65 calls a program named resend.fixmsg with only its name; in this case, MH will search your shell's search path for the command you specify. But during jobs run by "background" processes like cron, the search path can be short. If a background process gives an error like unable to exec rn-ans.fixmsg: No such file or directory, a full pathname can help.
Line 68 is for a shell script (program). Your shell scripts can read the MH profile with mhparam and mhprofile.