rtla-osnoise-top

Display a summary of the operating system noise

Manual section:

1

SYNOPSIS

rtla osnoise top [OPTIONS]

DESCRIPTION

The rtla osnoise tool is an interface for the osnoise tracer. The osnoise tracer dispatches a kernel thread per-cpu. These threads read the time in a loop while with preemption, softirq and IRQs enabled, thus allowing all the sources of operating system noise during its execution. The osnoise’s tracer threads take note of the delta between each time read, along with an interference counter of all sources of interference. At the end of each period, the osnoise tracer displays a summary of the results.

rtla osnoise top collects the periodic summary from the osnoise tracer, including the counters of the occurrence of the interference source, displaying the results in a user-friendly format.

The tool also allows many configurations of the osnoise tracer and the collection of the tracer output.

OPTIONS

-a, –auto us

Set the automatic trace mode. This mode sets some commonly used options while debugging the system. It is equivalent to use -s us -T 1 -t.

-p, –period us

Set the osnoise tracer period in microseconds.

-r, –runtime us

Set the osnoise tracer runtime in microseconds.

-s, –stop us

Stop the trace if a single sample is higher than the argument in microseconds. If -T is set, it will also save the trace to the output.

-S, –stop-total us

Stop the trace if the total sample is higher than the argument in microseconds. If -T is set, it will also save the trace to the output.

-T, –threshold us

Specify the minimum delta between two time reads to be considered noise. The default threshold is 5 us.

-q, –quiet

Print only a summary at the end of the session.

-c, –cpus cpu-list

Set the osnoise tracer to run the sample threads in the cpu-list.

-d, –duration time[s|m|h|d]

Set the duration of the session.

-D, –debug

Print debug info.

-t, –trace[=file]

Save the stopped trace to [file|osnoise_trace.txt].

-e, –event sys:event

Enable an event in the trace (-t) session. The argument can be a specific event, e.g., -e sched:sched_switch, or all events of a system group, e.g., -e sched. Multiple -e are allowed. It is only active when -t or -a are set.

–filter <filter>

Filter the previous -e sys:event event with <filter>. For further information about event filtering see https://www.kernel.org/doc/html/latest/trace/events.html#event-filtering.

–trigger <trigger>

Enable a trace event trigger to the previous -e sys:event. If the hist: trigger is activated, the output histogram will be automatically saved to a file named system_event_hist.txt. For example, the command:

rtla <command> <mode> -t -e osnoise:irq_noise –trigger=”hist:key=desc,duration/1000:sort=desc,duration/1000:vals=hitcount”

Will automatically save the content of the histogram associated to osnoise:irq_noise event in osnoise_irq_noise_hist.txt.

For further information about event trigger see https://www.kernel.org/doc/html/latest/trace/events.html#event-triggers.

-P, –priority o:prio|r:prio|f:prio|d:runtime:period

Set scheduling parameters to the osnoise tracer threads, the format to set the priority are:

  • o:prio - use SCHED_OTHER with prio;

  • r:prio - use SCHED_RR with prio;

  • f:prio - use SCHED_FIFO with prio;

  • d:runtime[us|ms|s]:period[us|ms|s] - use SCHED_DEADLINE with runtime and period in nanoseconds.

-h, –help

Print help menu.

EXAMPLE

In the example below, the rtla osnoise top tool is set to run with a real-time priority FIFO:1, on CPUs 0-3, for 900ms at each period (1s by default). The reason for reducing the runtime is to avoid starving the rtla tool. The tool is also set to run for one minute and to display a summary of the report at the end of the session:

[root@f34 ~]# rtla osnoise top -P F:1 -c 0-3 -r 900000 -d 1M -q
                                        Operating System Noise
duration:   0 00:01:00 | time is in us
CPU Period       Runtime        Noise  % CPU Aval   Max Noise   Max Single          HW          NMI          IRQ      Softirq       Thread
  0 #59         53100000       304896    99.42580        6978           56         549            0        53111         1590           13
  1 #59         53100000       338339    99.36282        8092           24         399            0        53130         1448           31
  2 #59         53100000       290842    99.45227        6582           39         855            0        53110         1406           12
  3 #59         53100000       204935    99.61405        6251           33         290            0        53156         1460           12

SEE ALSO

rtla-osnoise(1), rtla-osnoise-hist(1)

Osnoise tracer documentation: <https://www.kernel.org/doc/html/latest/trace/osnoise-tracer.html>

AUTHOR

Written by Daniel Bristot de Oliveira <bristot@kernel.org>

REPORTING BUGS

Report bugs to <linux-kernel@vger.kernel.org> and <linux-trace-devel@vger.kernel.org>

LICENSE

rtla is Free Software licensed under the GNU GPLv2

COPYING

Copyright (C) 2021 Red Hat, Inc. Free use of this software is granted under the terms of the GNU Public License (GPL).