I915 Small BAR RFC Section

Starting from DG2 we will have resizable BAR support for device local-memory(i.e I915_MEMORY_CLASS_DEVICE), but in some cases the final BAR size might still be smaller than the total probed_size. In such cases, only some subset of I915_MEMORY_CLASS_DEVICE will be CPU accessible(for example the first 256M), while the remainder is only accessible via the GPU.

I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS flag

New gem_create_ext flag to tell the kernel that a BO will require CPU access. This becomes important when placing an object in I915_MEMORY_CLASS_DEVICE, where underneath the device has a small BAR, meaning only some portion of it is CPU accessible. Without this flag the kernel will assume that CPU access is not required, and prioritize using the non-CPU visible portion of I915_MEMORY_CLASS_DEVICE.

struct __drm_i915_gem_create_ext

Existing gem_create behaviour, with added extension support using struct i915_user_extension.

Definition

struct __drm_i915_gem_create_ext {
  __u64 size;
  __u32 handle;
#define I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS (1 << 0);
  __u32 flags;
#define I915_GEM_CREATE_EXT_MEMORY_REGIONS 0;
#define I915_GEM_CREATE_EXT_PROTECTED_CONTENT 1;
  __u64 extensions;
};

Members

size

Requested size for the object.

The (page-aligned) allocated size for the object will be returned.

Note that for some devices we have might have further minimum page-size restrictions (larger than 4K), like for device local-memory. However in general the final size here should always reflect any rounding up, if for example using the I915_GEM_CREATE_EXT_MEMORY_REGIONS extension to place the object in device local-memory. The kernel will always select the largest minimum page-size for the set of possible placements as the value to use when rounding up the size.

handle

Returned handle for the object.

Object handles are nonzero.

flags

Optional flags.

Supported values:

I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS - Signal to the kernel that the object will need to be accessed via the CPU.

Only valid when placing objects in I915_MEMORY_CLASS_DEVICE, and only strictly required on configurations where some subset of the device memory is directly visible/mappable through the CPU (which we also call small BAR), like on some DG2+ systems. Note that this is quite undesirable, but due to various factors like the client CPU, BIOS etc it’s something we can expect to see in the wild. See __drm_i915_memory_region_info.probed_cpu_visible_size for how to determine if this system applies.

Note that one of the placements MUST be I915_MEMORY_CLASS_SYSTEM, to ensure the kernel can always spill the allocation to system memory, if the object can’t be allocated in the mappable part of I915_MEMORY_CLASS_DEVICE.

Also note that since the kernel only supports flat-CCS on objects that can only be placed in I915_MEMORY_CLASS_DEVICE, we therefore don’t support I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS together with flat-CCS.

Without this hint, the kernel will assume that non-mappable I915_MEMORY_CLASS_DEVICE is preferred for this object. Note that the kernel can still migrate the object to the mappable part, as a last resort, if userspace ever CPU faults this object, but this might be expensive, and so ideally should be avoided.

On older kernels which lack the relevant small-bar uAPI support (see also __drm_i915_memory_region_info.probed_cpu_visible_size), usage of the flag will result in an error, but it should NEVER be possible to end up with a small BAR configuration, assuming we can also successfully load the i915 kernel module. In such cases the entire I915_MEMORY_CLASS_DEVICE region will be CPU accessible, and as such there are zero restrictions on where the object can be placed.

extensions

The chain of extensions to apply to this object.

This will be useful in the future when we need to support several different extensions, and we need to apply more than one when creating the object. See struct i915_user_extension.

If we don’t supply any extensions then we get the same old gem_create behaviour.

For I915_GEM_CREATE_EXT_MEMORY_REGIONS usage see struct drm_i915_gem_create_ext_memory_regions.

For I915_GEM_CREATE_EXT_PROTECTED_CONTENT usage see struct drm_i915_gem_create_ext_protected_content.

Description

Note that new buffer flags should be added here, at least for the stuff that is immutable. Previously we would have two ioctls, one to create the object with gem_create, and another to apply various parameters, however this creates some ambiguity for the params which are considered immutable. Also in general we’re phasing out the various SET/GET ioctls.

probed_cpu_visible_size attribute

New struct__drm_i915_memory_region attribute which returns the total size of the CPU accessible portion, for the particular region. This should only be applicable for I915_MEMORY_CLASS_DEVICE. We also report the unallocated_cpu_visible_size, alongside the unallocated_size.

Vulkan will need this as part of creating a separate VkMemoryHeap with the VK_MEMORY_PROPERTY_HOST_VISIBLE_BIT set, to represent the CPU visible portion, where the total size of the heap needs to be known. It also wants to be able to give a rough estimate of how memory can potentially be allocated.

struct __drm_i915_memory_region_info

Describes one region as known to the driver.

Definition

struct __drm_i915_memory_region_info {
  struct drm_i915_gem_memory_class_instance region;
  __u32 rsvd0;
  __u64 probed_size;
  __u64 unallocated_size;
  union {
    __u64 rsvd1[8];
    struct {
      __u64 probed_cpu_visible_size;
      __u64 unallocated_cpu_visible_size;
    };
  };
};

Members

region

The class:instance pair encoding

rsvd0

MBZ

probed_size

Memory probed by the driver

Note that it should not be possible to ever encounter a zero value here, also note that no current region type will ever return -1 here. Although for future region types, this might be a possibility. The same applies to the other size fields.

unallocated_size

Estimate of memory remaining

Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable accounting. Without this (or if this is an older kernel) the value here will always equal the probed_size. Note this is only currently tracked for I915_MEMORY_CLASS_DEVICE regions (for other types the value here will always equal the probed_size).

{unnamed_union}

anonymous

rsvd1

MBZ

{unnamed_struct}

anonymous

probed_cpu_visible_size

Memory probed by the driver that is CPU accessible.

This will be always be <= probed_size, and the remainder (if there is any) will not be CPU accessible.

On systems without small BAR, the probed_size will always equal the probed_cpu_visible_size, since all of it will be CPU accessible.

Note this is only tracked for I915_MEMORY_CLASS_DEVICE regions (for other types the value here will always equal the probed_size).

Note that if the value returned here is zero, then this must be an old kernel which lacks the relevant small-bar uAPI support (including I915_GEM_CREATE_EXT_FLAG_NEEDS_CPU_ACCESS), but on such systems we should never actually end up with a small BAR configuration, assuming we are able to load the kernel module. Hence it should be safe to treat this the same as when probed_cpu_visible_size == probed_size.

unallocated_cpu_visible_size

Estimate of CPU visible memory remaining

Note this is only tracked for I915_MEMORY_CLASS_DEVICE regions (for other types the value here will always equal the probed_cpu_visible_size).

Requires CAP_PERFMON or CAP_SYS_ADMIN to get reliable accounting. Without this the value here will always equal the probed_cpu_visible_size. Note this is only currently tracked for I915_MEMORY_CLASS_DEVICE regions (for other types the value here will also always equal the probed_cpu_visible_size).

If this is an older kernel the value here will be zero, see also probed_cpu_visible_size.

Description

Note this is using both struct drm_i915_query_item and struct drm_i915_query. For this new query we are adding the new query id DRM_I915_QUERY_MEMORY_REGIONS at drm_i915_query_item.query_id.

Error Capture restrictions

With error capture we have two new restrictions:

1) Error capture is best effort on small BAR systems; if the pages are not CPU accessible, at the time of capture, then the kernel is free to skip trying to capture them.

2) On discrete and newer integrated platforms we now reject error capture on recoverable contexts. In the future the kernel may want to blit during error capture, when for example something is not currently CPU accessible.