Introduction
The plugin used for update firmware for fingerprint sensors from Goodix.
Firmware Format
The daemon will decompress the cabinet archive and extract a firmware blob in a packed binary file format.
This plugin supports the following protocol ID:
com.goodix.goodixmoc
GUID Generation
These devices use the standard USB DeviceInstanceId values, e.g.
USB\VID_27C6&PID_6001&REV_0001USB\VID_27C6&PID_6001USB\VID_27C6
Update Behavior
The firmware is deployed when the device is in normal runtime mode, and the device will reset when the new firmware has been written.
Vendor ID Security
The vendor ID is set from the USB vendor, in this instance set to USB:0x27C6
External Interface Access
This plugin requires read/write access to /dev/bus/usb.