libftdi1 1.5
Classes | Macros | Typedefs | Enumerations | Functions
ftdi.h File Reference
#include <stdint.h>
#include <sys/time.h>

Go to the source code of this file.

Classes

struct  ftdi_transfer_control
 
struct  ftdi_context
 Main context structure for all libftdi functions. More...
 
struct  ftdi_device_list
 list of usb devices created by ftdi_usb_find_all() More...
 
struct  size_and_time
 Progress Info for streaming read. More...
 
struct  FTDIProgressInfo
 
struct  ftdi_version_info
 

Macros

#define _Ftdi_Pragma(_msg)   _Pragma(_msg)
 
#define MPSSE_WRITE_NEG   0x01 /* Write TDI/DO on negative TCK/SK edge*/
 
#define MPSSE_BITMODE   0x02 /* Write bits, not bytes */
 
#define MPSSE_READ_NEG   0x04 /* Sample TDO/DI on negative TCK/SK edge */
 
#define MPSSE_LSB   0x08 /* LSB first */
 
#define MPSSE_DO_WRITE   0x10 /* Write TDI/DO */
 
#define MPSSE_DO_READ   0x20 /* Read TDO/DI */
 
#define MPSSE_WRITE_TMS   0x40 /* Write TMS/CS */
 
#define SET_BITS_LOW   0x80
 
#define SET_BITS_HIGH   0x82
 
#define GET_BITS_LOW   0x81
 
#define GET_BITS_HIGH   0x83
 
#define LOOPBACK_START   0x84
 
#define LOOPBACK_END   0x85
 
#define TCK_DIVISOR   0x86
 
#define DIS_DIV_5   0x8a
 
#define EN_DIV_5   0x8b
 
#define EN_3_PHASE   0x8c
 
#define DIS_3_PHASE   0x8d
 
#define CLK_BITS   0x8e
 
#define CLK_BYTES   0x8f
 
#define CLK_WAIT_HIGH   0x94
 
#define CLK_WAIT_LOW   0x95
 
#define EN_ADAPTIVE   0x96
 
#define DIS_ADAPTIVE   0x97
 
#define CLK_BYTES_OR_HIGH   0x9c
 
#define CLK_BYTES_OR_LOW   0x9d
 
#define DRIVE_OPEN_COLLECTOR   0x9e
 
#define DIV_VALUE(rate)   (rate > 6000000)?0:((6000000/rate -1) > 0xffff)? 0xffff: (6000000/rate -1)
 
#define SEND_IMMEDIATE   0x87
 
#define WAIT_ON_HIGH   0x88
 
#define WAIT_ON_LOW   0x89
 
#define READ_SHORT   0x90
 
#define READ_EXTENDED   0x91
 
#define WRITE_SHORT   0x92
 
#define WRITE_EXTENDED   0x93
 
#define SIO_RESET   0 /* Reset the port */
 
#define SIO_MODEM_CTRL   1 /* Set the modem control register */
 
#define SIO_SET_FLOW_CTRL   2 /* Set flow control register */
 
#define SIO_SET_BAUD_RATE   3 /* Set baud rate */
 
#define SIO_SET_DATA   4 /* Set the data characteristics of the port */
 
#define FTDI_DEVICE_OUT_REQTYPE   (LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE | LIBUSB_ENDPOINT_OUT)
 
#define FTDI_DEVICE_IN_REQTYPE   (LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE | LIBUSB_ENDPOINT_IN)
 
#define SIO_RESET_REQUEST   SIO_RESET
 
#define SIO_SET_BAUDRATE_REQUEST   SIO_SET_BAUD_RATE
 
#define SIO_SET_DATA_REQUEST   SIO_SET_DATA
 
#define SIO_SET_FLOW_CTRL_REQUEST   SIO_SET_FLOW_CTRL
 
#define SIO_SET_MODEM_CTRL_REQUEST   SIO_MODEM_CTRL
 
#define SIO_POLL_MODEM_STATUS_REQUEST   0x05
 
#define SIO_SET_EVENT_CHAR_REQUEST   0x06
 
#define SIO_SET_ERROR_CHAR_REQUEST   0x07
 
#define SIO_SET_LATENCY_TIMER_REQUEST   0x09
 
#define SIO_GET_LATENCY_TIMER_REQUEST   0x0A
 
#define SIO_SET_BITMODE_REQUEST   0x0B
 
#define SIO_READ_PINS_REQUEST   0x0C
 
#define SIO_READ_EEPROM_REQUEST   0x90
 
#define SIO_WRITE_EEPROM_REQUEST   0x91
 
#define SIO_ERASE_EEPROM_REQUEST   0x92
 
#define SIO_RESET_SIO   0
 
#define SIO_RESET_PURGE_RX   1
 
#define SIO_RESET_PURGE_TX   2
 
#define SIO_TCIFLUSH   2
 
#define SIO_TCOFLUSH   1
 
#define SIO_DISABLE_FLOW_CTRL   0x0
 
#define SIO_RTS_CTS_HS   (0x1 << 8)
 
#define SIO_DTR_DSR_HS   (0x2 << 8)
 
#define SIO_XON_XOFF_HS   (0x4 << 8)
 
#define SIO_SET_DTR_MASK   0x1
 
#define SIO_SET_DTR_HIGH   ( 1 | ( SIO_SET_DTR_MASK << 8))
 
#define SIO_SET_DTR_LOW   ( 0 | ( SIO_SET_DTR_MASK << 8))
 
#define SIO_SET_RTS_MASK   0x2
 
#define SIO_SET_RTS_HIGH   ( 2 | ( SIO_SET_RTS_MASK << 8 ))
 
#define SIO_SET_RTS_LOW   ( 0 | ( SIO_SET_RTS_MASK << 8 ))
 
#define SIO_RTS_CTS_HS   (0x1 << 8)
 
#define FTDI_URB_USERCONTEXT_COOKIE   ((void *)0x1)
 
#define DEPRECATED(func)   func
 
#define FT1284_CLK_IDLE_STATE   0x01
 
#define FT1284_DATA_LSB   0x02 /* DS_FT232H 1.3 amd ftd2xx.h 1.0.4 disagree here*/
 
#define FT1284_FLOW_CONTROL   0x04
 
#define POWER_SAVE_DISABLE_H   0x80
 
#define USE_SERIAL_NUM   0x08
 
#define INVERT_TXD   0x01
 
#define INVERT_RXD   0x02
 
#define INVERT_RTS   0x04
 
#define INVERT_CTS   0x08
 
#define INVERT_DTR   0x10
 
#define INVERT_DSR   0x20
 
#define INVERT_DCD   0x40
 
#define INVERT_RI   0x80
 
#define CHANNEL_IS_UART   0x0
 
#define CHANNEL_IS_FIFO   0x1
 
#define CHANNEL_IS_OPTO   0x2
 
#define CHANNEL_IS_CPU   0x4
 
#define CHANNEL_IS_FT1284   0x8
 
#define CHANNEL_IS_RS485   0x10
 
#define DRIVE_4MA   0
 
#define DRIVE_8MA   1
 
#define DRIVE_12MA   2
 
#define DRIVE_16MA   3
 
#define SLOW_SLEW   4
 
#define IS_SCHMITT   8
 
#define DRIVER_VCP   0x08
 
#define DRIVER_VCPH   0x10 /* FT232H has moved the VCP bit */
 
#define USE_USB_VERSION_BIT   0x10
 
#define SUSPEND_DBUS7_BIT   0x80
 
#define HIGH_CURRENT_DRIVE   0x10
 
#define HIGH_CURRENT_DRIVE_R   0x04
 

Typedefs

typedef int() FTDIStreamCallback(uint8_t *buffer, int length, FTDIProgressInfo *progress, void *userdata)
 

Enumerations

enum  ftdi_chip_type {
  TYPE_AM =0 , TYPE_BM =1 , TYPE_2232C =2 , TYPE_R =3 ,
  TYPE_2232H =4 , TYPE_4232H =5 , TYPE_232H =6 , TYPE_230X =7
}
 
enum  ftdi_parity_type {
  NONE =0 , ODD =1 , EVEN =2 , MARK =3 ,
  SPACE =4
}
 
enum  ftdi_stopbits_type { STOP_BIT_1 =0 , STOP_BIT_15 =1 , STOP_BIT_2 =2 }
 
enum  ftdi_bits_type { BITS_7 =7 , BITS_8 =8 }
 
enum  ftdi_break_type { BREAK_OFF =0 , BREAK_ON =1 }
 
enum  ftdi_mpsse_mode {
  BITMODE_RESET = 0x00 , BITMODE_BITBANG = 0x01 , BITMODE_MPSSE = 0x02 , BITMODE_SYNCBB = 0x04 ,
  BITMODE_MCU = 0x08 , BITMODE_OPTO = 0x10 , BITMODE_CBUS = 0x20 , BITMODE_SYNCFF = 0x40 ,
  BITMODE_FT1284 = 0x80
}
 
enum  ftdi_interface {
  INTERFACE_ANY = 0 , INTERFACE_A = 1 , INTERFACE_B = 2 , INTERFACE_C = 3 ,
  INTERFACE_D = 4
}
 
enum  ftdi_module_detach_mode { AUTO_DETACH_SIO_MODULE = 0 , DONT_DETACH_SIO_MODULE = 1 , AUTO_DETACH_REATACH_SIO_MODULE = 2 }
 
enum  ftdi_eeprom_value {
  VENDOR_ID = 0 , PRODUCT_ID = 1 , SELF_POWERED = 2 , REMOTE_WAKEUP = 3 ,
  IS_NOT_PNP = 4 , SUSPEND_DBUS7 = 5 , IN_IS_ISOCHRONOUS = 6 , OUT_IS_ISOCHRONOUS = 7 ,
  SUSPEND_PULL_DOWNS = 8 , USE_SERIAL = 9 , USB_VERSION = 10 , USE_USB_VERSION = 11 ,
  MAX_POWER = 12 , CHANNEL_A_TYPE = 13 , CHANNEL_B_TYPE = 14 , CHANNEL_A_DRIVER = 15 ,
  CHANNEL_B_DRIVER = 16 , CBUS_FUNCTION_0 = 17 , CBUS_FUNCTION_1 = 18 , CBUS_FUNCTION_2 = 19 ,
  CBUS_FUNCTION_3 = 20 , CBUS_FUNCTION_4 = 21 , CBUS_FUNCTION_5 = 22 , CBUS_FUNCTION_6 = 23 ,
  CBUS_FUNCTION_7 = 24 , CBUS_FUNCTION_8 = 25 , CBUS_FUNCTION_9 = 26 , HIGH_CURRENT = 27 ,
  HIGH_CURRENT_A = 28 , HIGH_CURRENT_B = 29 , INVERT = 30 , GROUP0_DRIVE = 31 ,
  GROUP0_SCHMITT = 32 , GROUP0_SLEW = 33 , GROUP1_DRIVE = 34 , GROUP1_SCHMITT = 35 ,
  GROUP1_SLEW = 36 , GROUP2_DRIVE = 37 , GROUP2_SCHMITT = 38 , GROUP2_SLEW = 39 ,
  GROUP3_DRIVE = 40 , GROUP3_SCHMITT = 41 , GROUP3_SLEW = 42 , CHIP_SIZE = 43 ,
  CHIP_TYPE = 44 , POWER_SAVE = 45 , CLOCK_POLARITY = 46 , DATA_ORDER = 47 ,
  FLOW_CONTROL = 48 , CHANNEL_C_DRIVER = 49 , CHANNEL_D_DRIVER = 50 , CHANNEL_A_RS485 = 51 ,
  CHANNEL_B_RS485 = 52 , CHANNEL_C_RS485 = 53 , CHANNEL_D_RS485 = 54 , RELEASE_NUMBER = 55 ,
  EXTERNAL_OSCILLATOR = 56 , USER_DATA_ADDR = 57
}
 
enum  ftdi_cbus_func {
  CBUS_TXDEN = 0 , CBUS_PWREN = 1 , CBUS_RXLED = 2 , CBUS_TXLED = 3 ,
  CBUS_TXRXLED = 4 , CBUS_SLEEP = 5 , CBUS_CLK48 = 6 , CBUS_CLK24 = 7 ,
  CBUS_CLK12 = 8 , CBUS_CLK6 = 9 , CBUS_IOMODE = 0xa , CBUS_BB_WR = 0xb ,
  CBUS_BB_RD = 0xc
}
 
enum  ftdi_cbush_func {
  CBUSH_TRISTATE = 0 , CBUSH_TXLED = 1 , CBUSH_RXLED = 2 , CBUSH_TXRXLED = 3 ,
  CBUSH_PWREN = 4 , CBUSH_SLEEP = 5 , CBUSH_DRIVE_0 = 6 , CBUSH_DRIVE1 = 7 ,
  CBUSH_IOMODE = 8 , CBUSH_TXDEN = 9 , CBUSH_CLK30 = 10 , CBUSH_CLK15 = 11 ,
  CBUSH_CLK7_5 = 12
}
 
enum  ftdi_cbusx_func {
  CBUSX_TRISTATE = 0 , CBUSX_TXLED = 1 , CBUSX_RXLED = 2 , CBUSX_TXRXLED = 3 ,
  CBUSX_PWREN = 4 , CBUSX_SLEEP = 5 , CBUSX_DRIVE_0 = 6 , CBUSX_DRIVE1 = 7 ,
  CBUSX_IOMODE = 8 , CBUSX_TXDEN = 9 , CBUSX_CLK24 = 10 , CBUSX_CLK12 = 11 ,
  CBUSX_CLK6 = 12 , CBUSX_BAT_DETECT = 13 , CBUSX_BAT_DETECT_NEG = 14 , CBUSX_I2C_TXE = 15 ,
  CBUSX_I2C_RXF = 16 , CBUSX_VBUS_SENSE = 17 , CBUSX_BB_WR = 18 , CBUSX_BB_RD = 19 ,
  CBUSX_TIME_STAMP = 20 , CBUSX_AWAKE = 21
}
 

Functions

int ftdi_init (struct ftdi_context *ftdi)
 
struct ftdi_contextftdi_new (void)
 
int ftdi_set_interface (struct ftdi_context *ftdi, enum ftdi_interface interface)
 
void ftdi_deinit (struct ftdi_context *ftdi)
 
void ftdi_free (struct ftdi_context *ftdi)
 
void ftdi_set_usbdev (struct ftdi_context *ftdi, struct libusb_device_handle *usbdev)
 
struct ftdi_version_info ftdi_get_library_version (void)
 Get libftdi library version. More...
 
int ftdi_usb_find_all (struct ftdi_context *ftdi, struct ftdi_device_list **devlist, int vendor, int product)
 
void ftdi_list_free (struct ftdi_device_list **devlist)
 
void ftdi_list_free2 (struct ftdi_device_list *devlist)
 
int ftdi_usb_get_strings (struct ftdi_context *ftdi, struct libusb_device *dev, char *manufacturer, int mnf_len, char *description, int desc_len, char *serial, int serial_len)
 
int ftdi_usb_get_strings2 (struct ftdi_context *ftdi, struct libusb_device *dev, char *manufacturer, int mnf_len, char *description, int desc_len, char *serial, int serial_len)
 
int ftdi_eeprom_get_strings (struct ftdi_context *ftdi, char *manufacturer, int mnf_len, char *product, int prod_len, char *serial, int serial_len)
 
int ftdi_eeprom_set_strings (struct ftdi_context *ftdi, const char *manufacturer, const char *product, const char *serial)
 
int ftdi_usb_open (struct ftdi_context *ftdi, int vendor, int product)
 
int ftdi_usb_open_desc (struct ftdi_context *ftdi, int vendor, int product, const char *description, const char *serial)
 
int ftdi_usb_open_desc_index (struct ftdi_context *ftdi, int vendor, int product, const char *description, const char *serial, unsigned int index)
 
int ftdi_usb_open_bus_addr (struct ftdi_context *ftdi, uint8_t bus, uint8_t addr)
 
int ftdi_usb_open_dev (struct ftdi_context *ftdi, struct libusb_device *dev)
 
int ftdi_usb_open_string (struct ftdi_context *ftdi, const char *description)
 
int ftdi_usb_close (struct ftdi_context *ftdi)
 
int ftdi_usb_reset (struct ftdi_context *ftdi)
 
int ftdi_tciflush (struct ftdi_context *ftdi)
 
int ftdi_tcoflush (struct ftdi_context *ftdi)
 
int ftdi_tcioflush (struct ftdi_context *ftdi)
 
int DEPRECATED (ftdi_usb_purge_rx_buffer(struct ftdi_context *ftdi))
 
int DEPRECATED (ftdi_usb_purge_tx_buffer(struct ftdi_context *ftdi))
 
int DEPRECATED (ftdi_usb_purge_buffers(struct ftdi_context *ftdi))
 
int ftdi_set_baudrate (struct ftdi_context *ftdi, int baudrate)
 
int ftdi_set_line_property (struct ftdi_context *ftdi, enum ftdi_bits_type bits, enum ftdi_stopbits_type sbit, enum ftdi_parity_type parity)
 
int ftdi_set_line_property2 (struct ftdi_context *ftdi, enum ftdi_bits_type bits, enum ftdi_stopbits_type sbit, enum ftdi_parity_type parity, enum ftdi_break_type break_type)
 
int ftdi_read_data (struct ftdi_context *ftdi, unsigned char *buf, int size)
 
int ftdi_read_data_set_chunksize (struct ftdi_context *ftdi, unsigned int chunksize)
 
int ftdi_read_data_get_chunksize (struct ftdi_context *ftdi, unsigned int *chunksize)
 
int ftdi_write_data (struct ftdi_context *ftdi, const unsigned char *buf, int size)
 
int ftdi_write_data_set_chunksize (struct ftdi_context *ftdi, unsigned int chunksize)
 
int ftdi_write_data_get_chunksize (struct ftdi_context *ftdi, unsigned int *chunksize)
 
int ftdi_readstream (struct ftdi_context *ftdi, FTDIStreamCallback *callback, void *userdata, int packetsPerTransfer, int numTransfers)
 
struct ftdi_transfer_controlftdi_write_data_submit (struct ftdi_context *ftdi, unsigned char *buf, int size)
 
struct ftdi_transfer_controlftdi_read_data_submit (struct ftdi_context *ftdi, unsigned char *buf, int size)
 
int ftdi_transfer_data_done (struct ftdi_transfer_control *tc)
 
void ftdi_transfer_data_cancel (struct ftdi_transfer_control *tc, struct timeval *to)
 
int ftdi_set_bitmode (struct ftdi_context *ftdi, unsigned char bitmask, unsigned char mode)
 
int ftdi_disable_bitbang (struct ftdi_context *ftdi)
 
int ftdi_read_pins (struct ftdi_context *ftdi, unsigned char *pins)
 
int ftdi_set_latency_timer (struct ftdi_context *ftdi, unsigned char latency)
 
int ftdi_get_latency_timer (struct ftdi_context *ftdi, unsigned char *latency)
 
int ftdi_poll_modem_status (struct ftdi_context *ftdi, unsigned short *status)
 
int ftdi_setflowctrl (struct ftdi_context *ftdi, int flowctrl)
 
int ftdi_setflowctrl_xonxoff (struct ftdi_context *ftdi, unsigned char xon, unsigned char xoff)
 
int ftdi_setdtr_rts (struct ftdi_context *ftdi, int dtr, int rts)
 
int ftdi_setdtr (struct ftdi_context *ftdi, int state)
 
int ftdi_setrts (struct ftdi_context *ftdi, int state)
 
int ftdi_set_event_char (struct ftdi_context *ftdi, unsigned char eventch, unsigned char enable)
 
int ftdi_set_error_char (struct ftdi_context *ftdi, unsigned char errorch, unsigned char enable)
 
int ftdi_eeprom_initdefaults (struct ftdi_context *ftdi, char *manufacturer, char *product, char *serial)
 
int ftdi_eeprom_build (struct ftdi_context *ftdi)
 
int ftdi_eeprom_decode (struct ftdi_context *ftdi, int verbose)
 
int ftdi_get_eeprom_value (struct ftdi_context *ftdi, enum ftdi_eeprom_value value_name, int *value)
 
int ftdi_set_eeprom_value (struct ftdi_context *ftdi, enum ftdi_eeprom_value value_name, int value)
 
int ftdi_get_eeprom_buf (struct ftdi_context *ftdi, unsigned char *buf, int size)
 
int ftdi_set_eeprom_buf (struct ftdi_context *ftdi, const unsigned char *buf, int size)
 
int ftdi_set_eeprom_user_data (struct ftdi_context *ftdi, const char *buf, int size)
 
int ftdi_read_eeprom (struct ftdi_context *ftdi)
 
int ftdi_read_chipid (struct ftdi_context *ftdi, unsigned int *chipid)
 
int ftdi_write_eeprom (struct ftdi_context *ftdi)
 
int ftdi_erase_eeprom (struct ftdi_context *ftdi)
 
int ftdi_read_eeprom_location (struct ftdi_context *ftdi, int eeprom_addr, unsigned short *eeprom_val)
 
int ftdi_write_eeprom_location (struct ftdi_context *ftdi, int eeprom_addr, unsigned short eeprom_val)
 
const char * ftdi_get_error_string (struct ftdi_context *ftdi)
 

Macro Definition Documentation

◆ _Ftdi_Pragma

#define _Ftdi_Pragma (   _msg)    _Pragma(_msg)

Definition at line 30 of file ftdi.h.

◆ MPSSE_WRITE_NEG

#define MPSSE_WRITE_NEG   0x01 /* Write TDI/DO on negative TCK/SK edge*/

Definition at line 100 of file ftdi.h.

◆ MPSSE_BITMODE

#define MPSSE_BITMODE   0x02 /* Write bits, not bytes */

Definition at line 101 of file ftdi.h.

◆ MPSSE_READ_NEG

#define MPSSE_READ_NEG   0x04 /* Sample TDO/DI on negative TCK/SK edge */

Definition at line 102 of file ftdi.h.

◆ MPSSE_LSB

#define MPSSE_LSB   0x08 /* LSB first */

Definition at line 103 of file ftdi.h.

◆ MPSSE_DO_WRITE

#define MPSSE_DO_WRITE   0x10 /* Write TDI/DO */

Definition at line 104 of file ftdi.h.

◆ MPSSE_DO_READ

#define MPSSE_DO_READ   0x20 /* Read TDO/DI */

Definition at line 105 of file ftdi.h.

◆ MPSSE_WRITE_TMS

#define MPSSE_WRITE_TMS   0x40 /* Write TMS/CS */

Definition at line 106 of file ftdi.h.

◆ SET_BITS_LOW

#define SET_BITS_LOW   0x80

Definition at line 109 of file ftdi.h.

◆ SET_BITS_HIGH

#define SET_BITS_HIGH   0x82

Definition at line 112 of file ftdi.h.

◆ GET_BITS_LOW

#define GET_BITS_LOW   0x81

Definition at line 115 of file ftdi.h.

◆ GET_BITS_HIGH

#define GET_BITS_HIGH   0x83

Definition at line 116 of file ftdi.h.

◆ LOOPBACK_START

#define LOOPBACK_START   0x84

Definition at line 117 of file ftdi.h.

◆ LOOPBACK_END

#define LOOPBACK_END   0x85

Definition at line 118 of file ftdi.h.

◆ TCK_DIVISOR

#define TCK_DIVISOR   0x86

Definition at line 119 of file ftdi.h.

◆ DIS_DIV_5

#define DIS_DIV_5   0x8a

Definition at line 121 of file ftdi.h.

◆ EN_DIV_5

#define EN_DIV_5   0x8b

Definition at line 122 of file ftdi.h.

◆ EN_3_PHASE

#define EN_3_PHASE   0x8c

Definition at line 123 of file ftdi.h.

◆ DIS_3_PHASE

#define DIS_3_PHASE   0x8d

Definition at line 124 of file ftdi.h.

◆ CLK_BITS

#define CLK_BITS   0x8e

Definition at line 125 of file ftdi.h.

◆ CLK_BYTES

#define CLK_BYTES   0x8f

Definition at line 126 of file ftdi.h.

◆ CLK_WAIT_HIGH

#define CLK_WAIT_HIGH   0x94

Definition at line 127 of file ftdi.h.

◆ CLK_WAIT_LOW

#define CLK_WAIT_LOW   0x95

Definition at line 128 of file ftdi.h.

◆ EN_ADAPTIVE

#define EN_ADAPTIVE   0x96

Definition at line 129 of file ftdi.h.

◆ DIS_ADAPTIVE

#define DIS_ADAPTIVE   0x97

Definition at line 130 of file ftdi.h.

◆ CLK_BYTES_OR_HIGH

#define CLK_BYTES_OR_HIGH   0x9c

Definition at line 131 of file ftdi.h.

◆ CLK_BYTES_OR_LOW

#define CLK_BYTES_OR_LOW   0x9d

Definition at line 132 of file ftdi.h.

◆ DRIVE_OPEN_COLLECTOR

#define DRIVE_OPEN_COLLECTOR   0x9e

Definition at line 134 of file ftdi.h.

◆ DIV_VALUE

#define DIV_VALUE (   rate)    (rate > 6000000)?0:((6000000/rate -1) > 0xffff)? 0xffff: (6000000/rate -1)

Definition at line 137 of file ftdi.h.

◆ SEND_IMMEDIATE

#define SEND_IMMEDIATE   0x87

Definition at line 140 of file ftdi.h.

◆ WAIT_ON_HIGH

#define WAIT_ON_HIGH   0x88

Definition at line 141 of file ftdi.h.

◆ WAIT_ON_LOW

#define WAIT_ON_LOW   0x89

Definition at line 142 of file ftdi.h.

◆ READ_SHORT

#define READ_SHORT   0x90

Definition at line 145 of file ftdi.h.

◆ READ_EXTENDED

#define READ_EXTENDED   0x91

Definition at line 147 of file ftdi.h.

◆ WRITE_SHORT

#define WRITE_SHORT   0x92

Definition at line 150 of file ftdi.h.

◆ WRITE_EXTENDED

#define WRITE_EXTENDED   0x93

Definition at line 152 of file ftdi.h.

◆ SIO_RESET

#define SIO_RESET   0 /* Reset the port */

Definition at line 157 of file ftdi.h.

◆ SIO_MODEM_CTRL

#define SIO_MODEM_CTRL   1 /* Set the modem control register */

Definition at line 158 of file ftdi.h.

◆ SIO_SET_FLOW_CTRL

#define SIO_SET_FLOW_CTRL   2 /* Set flow control register */

Definition at line 159 of file ftdi.h.

◆ SIO_SET_BAUD_RATE

#define SIO_SET_BAUD_RATE   3 /* Set baud rate */

Definition at line 160 of file ftdi.h.

◆ SIO_SET_DATA

#define SIO_SET_DATA   4 /* Set the data characteristics of the port */

Definition at line 161 of file ftdi.h.

◆ FTDI_DEVICE_OUT_REQTYPE

#define FTDI_DEVICE_OUT_REQTYPE   (LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE | LIBUSB_ENDPOINT_OUT)

Definition at line 163 of file ftdi.h.

◆ FTDI_DEVICE_IN_REQTYPE

#define FTDI_DEVICE_IN_REQTYPE   (LIBUSB_REQUEST_TYPE_VENDOR | LIBUSB_RECIPIENT_DEVICE | LIBUSB_ENDPOINT_IN)

Definition at line 164 of file ftdi.h.

◆ SIO_RESET_REQUEST

#define SIO_RESET_REQUEST   SIO_RESET

Definition at line 167 of file ftdi.h.

◆ SIO_SET_BAUDRATE_REQUEST

#define SIO_SET_BAUDRATE_REQUEST   SIO_SET_BAUD_RATE

Definition at line 168 of file ftdi.h.

◆ SIO_SET_DATA_REQUEST

#define SIO_SET_DATA_REQUEST   SIO_SET_DATA

Definition at line 169 of file ftdi.h.

◆ SIO_SET_FLOW_CTRL_REQUEST

#define SIO_SET_FLOW_CTRL_REQUEST   SIO_SET_FLOW_CTRL

Definition at line 170 of file ftdi.h.

◆ SIO_SET_MODEM_CTRL_REQUEST

#define SIO_SET_MODEM_CTRL_REQUEST   SIO_MODEM_CTRL

Definition at line 171 of file ftdi.h.

◆ SIO_POLL_MODEM_STATUS_REQUEST

#define SIO_POLL_MODEM_STATUS_REQUEST   0x05

Definition at line 172 of file ftdi.h.

◆ SIO_SET_EVENT_CHAR_REQUEST

#define SIO_SET_EVENT_CHAR_REQUEST   0x06

Definition at line 173 of file ftdi.h.

◆ SIO_SET_ERROR_CHAR_REQUEST

#define SIO_SET_ERROR_CHAR_REQUEST   0x07

Definition at line 174 of file ftdi.h.

◆ SIO_SET_LATENCY_TIMER_REQUEST

#define SIO_SET_LATENCY_TIMER_REQUEST   0x09

Definition at line 175 of file ftdi.h.

◆ SIO_GET_LATENCY_TIMER_REQUEST

#define SIO_GET_LATENCY_TIMER_REQUEST   0x0A

Definition at line 176 of file ftdi.h.

◆ SIO_SET_BITMODE_REQUEST

#define SIO_SET_BITMODE_REQUEST   0x0B

Definition at line 177 of file ftdi.h.

◆ SIO_READ_PINS_REQUEST

#define SIO_READ_PINS_REQUEST   0x0C

Definition at line 178 of file ftdi.h.

◆ SIO_READ_EEPROM_REQUEST

#define SIO_READ_EEPROM_REQUEST   0x90

Definition at line 179 of file ftdi.h.

◆ SIO_WRITE_EEPROM_REQUEST

#define SIO_WRITE_EEPROM_REQUEST   0x91

Definition at line 180 of file ftdi.h.

◆ SIO_ERASE_EEPROM_REQUEST

#define SIO_ERASE_EEPROM_REQUEST   0x92

Definition at line 181 of file ftdi.h.

◆ SIO_RESET_SIO

#define SIO_RESET_SIO   0

Definition at line 184 of file ftdi.h.

◆ SIO_RESET_PURGE_RX

#define SIO_RESET_PURGE_RX   1

Definition at line 218 of file ftdi.h.

◆ SIO_RESET_PURGE_TX

#define SIO_RESET_PURGE_TX   2

Definition at line 219 of file ftdi.h.

◆ SIO_TCIFLUSH

#define SIO_TCIFLUSH   2

Definition at line 222 of file ftdi.h.

◆ SIO_TCOFLUSH

#define SIO_TCOFLUSH   1

Definition at line 223 of file ftdi.h.

◆ SIO_DISABLE_FLOW_CTRL

#define SIO_DISABLE_FLOW_CTRL   0x0

Definition at line 225 of file ftdi.h.

◆ SIO_RTS_CTS_HS [1/2]

#define SIO_RTS_CTS_HS   (0x1 << 8)

Definition at line 237 of file ftdi.h.

◆ SIO_DTR_DSR_HS

#define SIO_DTR_DSR_HS   (0x2 << 8)

Definition at line 227 of file ftdi.h.

◆ SIO_XON_XOFF_HS

#define SIO_XON_XOFF_HS   (0x4 << 8)

Definition at line 228 of file ftdi.h.

◆ SIO_SET_DTR_MASK

#define SIO_SET_DTR_MASK   0x1

Definition at line 230 of file ftdi.h.

◆ SIO_SET_DTR_HIGH

#define SIO_SET_DTR_HIGH   ( 1 | ( SIO_SET_DTR_MASK << 8))

Definition at line 231 of file ftdi.h.

◆ SIO_SET_DTR_LOW

#define SIO_SET_DTR_LOW   ( 0 | ( SIO_SET_DTR_MASK << 8))

Definition at line 232 of file ftdi.h.

◆ SIO_SET_RTS_MASK

#define SIO_SET_RTS_MASK   0x2

Definition at line 233 of file ftdi.h.

◆ SIO_SET_RTS_HIGH

#define SIO_SET_RTS_HIGH   ( 2 | ( SIO_SET_RTS_MASK << 8 ))

Definition at line 234 of file ftdi.h.

◆ SIO_SET_RTS_LOW

#define SIO_SET_RTS_LOW   ( 0 | ( SIO_SET_RTS_MASK << 8 ))

Definition at line 235 of file ftdi.h.

◆ SIO_RTS_CTS_HS [2/2]

#define SIO_RTS_CTS_HS   (0x1 << 8)

Definition at line 237 of file ftdi.h.

◆ FTDI_URB_USERCONTEXT_COOKIE

#define FTDI_URB_USERCONTEXT_COOKIE   ((void *)0x1)

Definition at line 241 of file ftdi.h.

◆ DEPRECATED

#define DEPRECATED (   func)    func

Definition at line 252 of file ftdi.h.

◆ FT1284_CLK_IDLE_STATE

#define FT1284_CLK_IDLE_STATE   0x01

Definition at line 401 of file ftdi.h.

◆ FT1284_DATA_LSB

#define FT1284_DATA_LSB   0x02 /* DS_FT232H 1.3 amd ftd2xx.h 1.0.4 disagree here*/

Definition at line 402 of file ftdi.h.

◆ FT1284_FLOW_CONTROL

#define FT1284_FLOW_CONTROL   0x04

Definition at line 403 of file ftdi.h.

◆ POWER_SAVE_DISABLE_H

#define POWER_SAVE_DISABLE_H   0x80

Definition at line 404 of file ftdi.h.

◆ USE_SERIAL_NUM

#define USE_SERIAL_NUM   0x08

Definition at line 406 of file ftdi.h.

◆ INVERT_TXD

#define INVERT_TXD   0x01

Invert TXD#

Definition at line 431 of file ftdi.h.

◆ INVERT_RXD

#define INVERT_RXD   0x02

Invert RXD#

Definition at line 433 of file ftdi.h.

◆ INVERT_RTS

#define INVERT_RTS   0x04

Invert RTS#

Definition at line 435 of file ftdi.h.

◆ INVERT_CTS

#define INVERT_CTS   0x08

Invert CTS#

Definition at line 437 of file ftdi.h.

◆ INVERT_DTR

#define INVERT_DTR   0x10

Invert DTR#

Definition at line 439 of file ftdi.h.

◆ INVERT_DSR

#define INVERT_DSR   0x20

Invert DSR#

Definition at line 441 of file ftdi.h.

◆ INVERT_DCD

#define INVERT_DCD   0x40

Invert DCD#

Definition at line 443 of file ftdi.h.

◆ INVERT_RI

#define INVERT_RI   0x80

Invert RI#

Definition at line 445 of file ftdi.h.

◆ CHANNEL_IS_UART

#define CHANNEL_IS_UART   0x0

Interface Mode.

Definition at line 448 of file ftdi.h.

◆ CHANNEL_IS_FIFO

#define CHANNEL_IS_FIFO   0x1

Definition at line 449 of file ftdi.h.

◆ CHANNEL_IS_OPTO

#define CHANNEL_IS_OPTO   0x2

Definition at line 450 of file ftdi.h.

◆ CHANNEL_IS_CPU

#define CHANNEL_IS_CPU   0x4

Definition at line 451 of file ftdi.h.

◆ CHANNEL_IS_FT1284

#define CHANNEL_IS_FT1284   0x8

Definition at line 452 of file ftdi.h.

◆ CHANNEL_IS_RS485

#define CHANNEL_IS_RS485   0x10

Definition at line 454 of file ftdi.h.

◆ DRIVE_4MA

#define DRIVE_4MA   0

Definition at line 456 of file ftdi.h.

◆ DRIVE_8MA

#define DRIVE_8MA   1

Definition at line 457 of file ftdi.h.

◆ DRIVE_12MA

#define DRIVE_12MA   2

Definition at line 458 of file ftdi.h.

◆ DRIVE_16MA

#define DRIVE_16MA   3

Definition at line 459 of file ftdi.h.

◆ SLOW_SLEW

#define SLOW_SLEW   4

Definition at line 460 of file ftdi.h.

◆ IS_SCHMITT

#define IS_SCHMITT   8

Definition at line 461 of file ftdi.h.

◆ DRIVER_VCP

#define DRIVER_VCP   0x08

Driver Type.

Definition at line 464 of file ftdi.h.

◆ DRIVER_VCPH

#define DRIVER_VCPH   0x10 /* FT232H has moved the VCP bit */

Definition at line 465 of file ftdi.h.

◆ USE_USB_VERSION_BIT

#define USE_USB_VERSION_BIT   0x10

Definition at line 467 of file ftdi.h.

◆ SUSPEND_DBUS7_BIT

#define SUSPEND_DBUS7_BIT   0x80

Definition at line 469 of file ftdi.h.

◆ HIGH_CURRENT_DRIVE

#define HIGH_CURRENT_DRIVE   0x10

High current drive.

Definition at line 472 of file ftdi.h.

◆ HIGH_CURRENT_DRIVE_R

#define HIGH_CURRENT_DRIVE_R   0x04

Definition at line 473 of file ftdi.h.

Typedef Documentation

◆ FTDIStreamCallback

typedef int() FTDIStreamCallback(uint8_t *buffer, int length, FTDIProgressInfo *progress, void *userdata)

Definition at line 494 of file ftdi.h.

Enumeration Type Documentation

◆ ftdi_chip_type

FTDI chip type

Enumerator
TYPE_AM 
TYPE_BM 
TYPE_2232C 
TYPE_R 
TYPE_2232H 
TYPE_4232H 
TYPE_232H 
TYPE_230X 

Definition at line 46 of file ftdi.h.

◆ ftdi_parity_type

Parity mode for ftdi_set_line_property()

Enumerator
NONE 
ODD 
EVEN 
MARK 
SPACE 

Definition at line 58 of file ftdi.h.

◆ ftdi_stopbits_type

Number of stop bits for ftdi_set_line_property()

Enumerator
STOP_BIT_1 
STOP_BIT_15 
STOP_BIT_2 

Definition at line 60 of file ftdi.h.

◆ ftdi_bits_type

Number of bits for ftdi_set_line_property()

Enumerator
BITS_7 
BITS_8 

Definition at line 62 of file ftdi.h.

◆ ftdi_break_type

Break type for ftdi_set_line_property2()

Enumerator
BREAK_OFF 
BREAK_ON 

Definition at line 64 of file ftdi.h.

◆ ftdi_mpsse_mode

MPSSE bitbang modes

Enumerator
BITMODE_RESET 

switch off bitbang mode, back to regular serial/FIFO

BITMODE_BITBANG 

classical asynchronous bitbang mode, introduced with B-type chips

BITMODE_MPSSE 

MPSSE mode, available on 2232x chips

BITMODE_SYNCBB 

synchronous bitbang mode, available on 2232x and R-type chips

BITMODE_MCU 

MCU Host Bus Emulation mode, available on 2232x chips

BITMODE_OPTO 

Fast Opto-Isolated Serial Interface Mode, available on 2232x chips

BITMODE_CBUS 

Bitbang on CBUS pins of R-type chips, configure in EEPROM before

BITMODE_SYNCFF 

Single Channel Synchronous FIFO mode, available on 2232H chips

BITMODE_FT1284 

FT1284 mode, available on 232H chips

Definition at line 67 of file ftdi.h.

◆ ftdi_interface

Port interface for chips with multiple interfaces

Enumerator
INTERFACE_ANY 
INTERFACE_A 
INTERFACE_B 
INTERFACE_C 
INTERFACE_D 

Definition at line 82 of file ftdi.h.

◆ ftdi_module_detach_mode

Automatic loading / unloading of kernel modules

Enumerator
AUTO_DETACH_SIO_MODULE 
DONT_DETACH_SIO_MODULE 
AUTO_DETACH_REATACH_SIO_MODULE 

Definition at line 92 of file ftdi.h.

◆ ftdi_eeprom_value

List all handled EEPROM values. Append future new values only at the end to provide API/ABI stability

Enumerator
VENDOR_ID 
PRODUCT_ID 
SELF_POWERED 
REMOTE_WAKEUP 
IS_NOT_PNP 
SUSPEND_DBUS7 
IN_IS_ISOCHRONOUS 
OUT_IS_ISOCHRONOUS 
SUSPEND_PULL_DOWNS 
USE_SERIAL 
USB_VERSION 
USE_USB_VERSION 
MAX_POWER 
CHANNEL_A_TYPE 
CHANNEL_B_TYPE 
CHANNEL_A_DRIVER 
CHANNEL_B_DRIVER 
CBUS_FUNCTION_0 
CBUS_FUNCTION_1 
CBUS_FUNCTION_2 
CBUS_FUNCTION_3 
CBUS_FUNCTION_4 
CBUS_FUNCTION_5 
CBUS_FUNCTION_6 
CBUS_FUNCTION_7 
CBUS_FUNCTION_8 
CBUS_FUNCTION_9 
HIGH_CURRENT 
HIGH_CURRENT_A 
HIGH_CURRENT_B 
INVERT 
GROUP0_DRIVE 
GROUP0_SCHMITT 
GROUP0_SLEW 
GROUP1_DRIVE 
GROUP1_SCHMITT 
GROUP1_SLEW 
GROUP2_DRIVE 
GROUP2_SCHMITT 
GROUP2_SLEW 
GROUP3_DRIVE 
GROUP3_SCHMITT 
GROUP3_SLEW 
CHIP_SIZE 
CHIP_TYPE 
POWER_SAVE 
CLOCK_POLARITY 
DATA_ORDER 
FLOW_CONTROL 
CHANNEL_C_DRIVER 
CHANNEL_D_DRIVER 
CHANNEL_A_RS485 
CHANNEL_B_RS485 
CHANNEL_C_RS485 
CHANNEL_D_RS485 
RELEASE_NUMBER 
EXTERNAL_OSCILLATOR 
USER_DATA_ADDR 

Definition at line 329 of file ftdi.h.

◆ ftdi_cbus_func

Enumerator
CBUS_TXDEN 
CBUS_PWREN 
CBUS_RXLED 
CBUS_TXLED 
CBUS_TXRXLED 
CBUS_SLEEP 
CBUS_CLK48 
CBUS_CLK24 
CBUS_CLK12 
CBUS_CLK6 
CBUS_IOMODE 
CBUS_BB_WR 
CBUS_BB_RD 

Definition at line 407 of file ftdi.h.

◆ ftdi_cbush_func

Enumerator
CBUSH_TRISTATE 
CBUSH_TXLED 
CBUSH_RXLED 
CBUSH_TXRXLED 
CBUSH_PWREN 
CBUSH_SLEEP 
CBUSH_DRIVE_0 
CBUSH_DRIVE1 
CBUSH_IOMODE 
CBUSH_TXDEN 
CBUSH_CLK30 
CBUSH_CLK15 
CBUSH_CLK7_5 

Definition at line 414 of file ftdi.h.

◆ ftdi_cbusx_func

Enumerator
CBUSX_TRISTATE 
CBUSX_TXLED 
CBUSX_RXLED 
CBUSX_TXRXLED 
CBUSX_PWREN 
CBUSX_SLEEP 
CBUSX_DRIVE_0 
CBUSX_DRIVE1 
CBUSX_IOMODE 
CBUSX_TXDEN 
CBUSX_CLK24 
CBUSX_CLK12 
CBUSX_CLK6 
CBUSX_BAT_DETECT 
CBUSX_BAT_DETECT_NEG 
CBUSX_I2C_TXE 
CBUSX_I2C_RXF 
CBUSX_VBUS_SENSE 
CBUSX_BB_WR 
CBUSX_BB_RD 
CBUSX_TIME_STAMP 
CBUSX_AWAKE 

Definition at line 421 of file ftdi.h.

Function Documentation

◆ ftdi_init()

int ftdi_init ( struct ftdi_context ftdi)

◆ ftdi_new()

struct ftdi_context * ftdi_new ( void  )

Allocate and initialize a new ftdi_context

Returns
a pointer to a new ftdi_context, or NULL on failure

Definition at line 132 of file ftdi.c.

References ftdi_init().

Referenced by Ftdi::Context::Private::Private().

◆ ftdi_set_interface()

int ftdi_set_interface ( struct ftdi_context ftdi,
enum ftdi_interface  interface 
)

Open selected channels on a chip, otherwise use first channel.

Parameters
ftdipointer to ftdi_context
interfaceInterface to use for FT2232C/2232H/4232H chips.
Return values
0all fine
-1unknown interface
-2USB device unavailable
-3Device already open, interface can't be set in that state

Definition at line 161 of file ftdi.c.

References ftdi_error_return, ftdi_context::in_ep, ftdi_context::index, ftdi_context::interface, INTERFACE_A, INTERFACE_ANY, INTERFACE_B, INTERFACE_C, INTERFACE_D, ftdi_context::out_ep, and ftdi_context::usb_dev.

Referenced by ftdi_init(), and Ftdi::Context::set_interface().

◆ ftdi_deinit()

void ftdi_deinit ( struct ftdi_context ftdi)

Deinitializes a ftdi_context.

Parameters
ftdipointer to ftdi_context

Definition at line 214 of file ftdi.c.

Referenced by ftdi_free().

◆ ftdi_free()

void ftdi_free ( struct ftdi_context ftdi)

Deinitialize and free an ftdi_context.

Parameters
ftdipointer to ftdi_context

Definition at line 260 of file ftdi.c.

References ftdi_deinit().

Referenced by Ftdi::Context::set_context(), and Ftdi::Context::Private::~Private().

◆ ftdi_set_usbdev()

void ftdi_set_usbdev ( struct ftdi_context ftdi,
libusb_device_handle *  usb 
)

Use an already open libusb device.

Parameters
ftdipointer to ftdi_context
usblibusb libusb_device_handle to use

Definition at line 272 of file ftdi.c.

References ftdi_context::usb_dev.

Referenced by Ftdi::Context::set_usb_device().

◆ ftdi_get_library_version()

struct ftdi_version_info ftdi_get_library_version ( void  )

Get libftdi library version.

Returns
ftdi_version_info Library version information

Definition at line 285 of file ftdi.c.

References ftdi_version_info::major, ftdi_version_info::micro, ftdi_version_info::minor, ftdi_version_info::snapshot_str, and ftdi_version_info::version_str.

◆ ftdi_usb_find_all()

int ftdi_usb_find_all ( struct ftdi_context ftdi,
struct ftdi_device_list **  devlist,
int  vendor,
int  product 
)

Finds all ftdi devices with given VID:PID on the usb bus. Creates a new ftdi_device_list which needs to be deallocated by ftdi_list_free() after use. With VID:PID 0:0, search for the default devices (0x403:0x6001, 0x403:0x6010, 0x403:0x6011, 0x403:0x6014, 0x403:0x6015)

Parameters
ftdipointer to ftdi_context
devlistPointer where to store list of found devices
vendorVendor ID to search for
productProduct ID to search for
Return values
>0number of devices found
-3out of memory
-5libusb_get_device_list() failed
-6libusb_get_device_descriptor() failed

Definition at line 314 of file ftdi.c.

References ftdi_device_list::dev, ftdi_error_return, ftdi_error_return_free_device_list, ftdi_device_list::next, and ftdi_context::usb_ctx.

Referenced by Ftdi::List::find_all().

◆ ftdi_list_free()

void ftdi_list_free ( struct ftdi_device_list **  devlist)

Frees a usb device list.

Parameters
devlistUSB device list created by ftdi_usb_find_all()

Definition at line 362 of file ftdi.c.

References ftdi_device_list::dev, and ftdi_device_list::next.

Referenced by Ftdi::List::clear(), ftdi_list_free2(), and Ftdi::List::Private::~Private().

◆ ftdi_list_free2()

void ftdi_list_free2 ( struct ftdi_device_list devlist)

Frees a usb device list.

Parameters
devlistUSB device list created by ftdi_usb_find_all()

Definition at line 382 of file ftdi.c.

References ftdi_list_free().

◆ ftdi_usb_get_strings()

int ftdi_usb_get_strings ( struct ftdi_context ftdi,
struct libusb_device *  dev,
char *  manufacturer,
int  mnf_len,
char *  description,
int  desc_len,
char *  serial,
int  serial_len 
)

Return device ID strings from the usb device.

The parameters manufacturer, description and serial may be NULL or pointer to buffers to store the fetched strings.

Note
Use this function only in combination with ftdi_usb_find_all() as it closes the internal "usb_dev" after use.
Parameters
ftdipointer to ftdi_context
devlibusb usb_dev to use
manufacturerStore manufacturer string here if not NULL
mnf_lenBuffer size of manufacturer string
descriptionStore product description string here if not NULL
desc_lenBuffer size of product description string
serialStore serial string here if not NULL
serial_lenBuffer size of serial string
Return values
0all fine
-1wrong arguments
-4unable to open device
-7get product manufacturer failed
-8get product description failed
-9get serial number failed
-11libusb_get_device_descriptor() failed

Definition at line 413 of file ftdi.c.

References ftdi_device_list::dev, ftdi_error_return, ftdi_usb_get_strings2(), and ftdi_context::usb_dev.

Referenced by Ftdi::Context::get_strings().

◆ ftdi_usb_get_strings2()

int ftdi_usb_get_strings2 ( struct ftdi_context ftdi,
struct libusb_device *  dev,
char *  manufacturer,
int  mnf_len,
char *  description,
int  desc_len,
char *  serial,
int  serial_len 
)

Return device ID strings from the usb device.

The parameters manufacturer, description and serial may be NULL or pointer to buffers to store the fetched strings.

Note
The old function ftdi_usb_get_strings() always closes the device. This version only closes the device if it was opened by it.
Parameters
ftdipointer to ftdi_context
devlibusb usb_dev to use
manufacturerStore manufacturer string here if not NULL
mnf_lenBuffer size of manufacturer string
descriptionStore product description string here if not NULL
desc_lenBuffer size of product description string
serialStore serial string here if not NULL
serial_lenBuffer size of serial string
Return values
0all fine
-1wrong arguments
-4unable to open device
-7get product manufacturer failed
-8get product description failed
-9get serial number failed
-11libusb_get_device_descriptor() failed

Definition at line 470 of file ftdi.c.

References ftdi_error_return, and ftdi_context::usb_dev.

Referenced by ftdi_usb_get_strings().

◆ ftdi_eeprom_get_strings()

int ftdi_eeprom_get_strings ( struct ftdi_context ftdi,
char *  manufacturer,
int  mnf_len,
char *  product,
int  prod_len,
char *  serial,
int  serial_len 
)

Return device ID strings from the eeprom. Device needs to be connected.

The parameters manufacturer, description and serial may be NULL or pointer to buffers to store the fetched strings.

Parameters
ftdipointer to ftdi_context
manufacturerStore manufacturer string here if not NULL
mnf_lenBuffer size of manufacturer string
productStore product description string here if not NULL
prod_lenBuffer size of product description string
serialStore serial string here if not NULL
serial_lenBuffer size of serial string
Return values
0all fine
-1ftdi context invalid
-2ftdi eeprom buffer invalid

Definition at line 2793 of file ftdi.c.

References ftdi_context::eeprom, ftdi_error_return, ftdi_eeprom::manufacturer, ftdi_eeprom::product, and ftdi_eeprom::serial.

◆ ftdi_eeprom_set_strings()

int ftdi_eeprom_set_strings ( struct ftdi_context ftdi,
const char *  manufacturer,
const char *  product,
const char *  serial 
)

◆ ftdi_usb_open()

int ftdi_usb_open ( struct ftdi_context ftdi,
int  vendor,
int  product 
)

Opens the first device with a given vendor and product ids.

Parameters
ftdipointer to ftdi_context
vendorVendor ID
productProduct ID
Return values
sameas ftdi_usb_open_desc()

Definition at line 707 of file ftdi.c.

References ftdi_usb_open_desc().

Referenced by Ftdi::Context::open().

◆ ftdi_usb_open_desc()

int ftdi_usb_open_desc ( struct ftdi_context ftdi,
int  vendor,
int  product,
const char *  description,
const char *  serial 
)

Opens the first device with a given, vendor id, product id, description and serial.

Parameters
ftdipointer to ftdi_context
vendorVendor ID
productProduct ID
descriptionDescription to search for. Use NULL if not needed.
serialSerial to search for. Use NULL if not needed.
Return values
0all fine
-3usb device not found
-4unable to open device
-5unable to claim device
-6reset failed
-7set baudrate failed
-8get product description failed
-9get serial number failed
-12libusb_get_device_list() failed
-13libusb_get_device_descriptor() failed

Definition at line 733 of file ftdi.c.

References ftdi_usb_open_desc_index().

Referenced by ftdi_usb_open().

◆ ftdi_usb_open_desc_index()

int ftdi_usb_open_desc_index ( struct ftdi_context ftdi,
int  vendor,
int  product,
const char *  description,
const char *  serial,
unsigned int  index 
)

Opens the index-th device with a given, vendor id, product id, description and serial.

Parameters
ftdipointer to ftdi_context
vendorVendor ID
productProduct ID
descriptionDescription to search for. Use NULL if not needed.
serialSerial to search for. Use NULL if not needed.
indexNumber of matching device to open if there are more than one, starts with 0.
Return values
0all fine
-1usb_find_busses() failed
-2usb_find_devices() failed
-3usb device not found
-4unable to open device
-5unable to claim device
-6reset failed
-7set baudrate failed
-8get product description failed
-9get serial number failed
-10unable to close device
-11ftdi context invalid
-12libusb_get_device_list() failed

Definition at line 764 of file ftdi.c.

References ftdi_error_return, ftdi_error_return_free_device_list, ftdi_context::usb_ctx, and ftdi_context::usb_dev.

Referenced by ftdi_usb_open_desc(), ftdi_usb_open_string(), and Ftdi::Context::open().

◆ ftdi_usb_open_bus_addr()

int ftdi_usb_open_bus_addr ( struct ftdi_context ftdi,
uint8_t  bus,
uint8_t  addr 
)

Opens the device at a given USB bus and device address.

Parameters
ftdipointer to ftdi_context
busBus number
addrDevice address
Return values
0all fine
-1usb_find_busses() failed
-2usb_find_devices() failed
-3usb device not found
-4unable to open device
-5unable to claim device
-6reset failed
-7set baudrate failed
-8get product description failed
-9get serial number failed
-10unable to close device
-11ftdi context invalid
-12libusb_get_device_list() failed

Definition at line 857 of file ftdi.c.

References ftdi_error_return, ftdi_error_return_free_device_list, ftdi_usb_open_dev(), and ftdi_context::usb_ctx.

◆ ftdi_usb_open_dev()

int ftdi_usb_open_dev ( struct ftdi_context ftdi,
libusb_device *  dev 
)

Opens a ftdi device given by an usb_device.

Parameters
ftdipointer to ftdi_context
devlibusb usb_dev to use
Return values
0all fine
-3unable to config device
-4unable to open device
-5unable to claim device
-6reset failed
-7set baudrate failed
-8ftdi context invalid
-9libusb_get_device_descriptor() failed
-10libusb_get_config_descriptor() failed
-11libusb_detach_kernel_driver() failed
-12libusb_get_configuration() failed

Definition at line 589 of file ftdi.c.

References AUTO_DETACH_REATACH_SIO_MODULE, AUTO_DETACH_SIO_MODULE, ftdi_error_return, ftdi_context::interface, ftdi_context::module_detach_mode, and ftdi_context::usb_dev.

Referenced by ftdi_usb_open_bus_addr(), ftdi_usb_open_string(), and Ftdi::Context::get_strings_and_reopen().

◆ ftdi_usb_open_string()

int ftdi_usb_open_string ( struct ftdi_context ftdi,
const char *  description 
)

Opens the ftdi-device described by a description-string. Intended to be used for parsing a device-description given as commandline argument.

Parameters
ftdipointer to ftdi_context
descriptionNULL-terminated description-string, using this format:
  • d:<devicenode> path of bus and device-node (e.g. "003/001") within usb device tree (usually at /proc/bus/usb/)
  • i:<vendor>:<product> first device with given vendor and product id, ids can be decimal, octal (preceded by "0") or hex (preceded by "0x")
  • i:<vendor>:<product>:<index> as above with index being the number of the device (starting with 0) if there are more than one
  • s:<vendor>:<product>:<serial> first device with given vendor id, product id and serial string
Note
The description format may be extended in later versions.
Return values
0all fine
-2libusb_get_device_list() failed
-3usb device not found
-4unable to open device
-5unable to claim device
-6reset failed
-7set baudrate failed
-8get product description failed
-9get serial number failed
-10unable to close device
-11illegal description format
-12ftdi context invalid

Definition at line 910 of file ftdi.c.

References ftdi_error_return, ftdi_error_return_free_device_list, ftdi_usb_open_desc_index(), ftdi_usb_open_dev(), and ftdi_context::usb_ctx.

Referenced by Ftdi::Context::open().

◆ ftdi_usb_close()

int ftdi_usb_close ( struct ftdi_context ftdi)

Closes the ftdi device. Call ftdi_deinit() if you're cleaning up.

Parameters
ftdipointer to ftdi_context
Return values
0all fine
-1usb_release failed
-3ftdi context invalid

Definition at line 1197 of file ftdi.c.

References ftdi_error_return, ftdi_context::interface, and ftdi_context::usb_dev.

Referenced by Ftdi::Context::close(), and Ftdi::Context::Private::~Private().

◆ ftdi_usb_reset()

int ftdi_usb_reset ( struct ftdi_context ftdi)

Resets the ftdi device.

Parameters
ftdipointer to ftdi_context
Return values
0all fine
-1FTDI reset failed
-2USB device unavailable

Definition at line 1003 of file ftdi.c.

References FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_context::index, ftdi_context::readbuffer_offset, ftdi_context::readbuffer_remaining, SIO_RESET_REQUEST, SIO_RESET_SIO, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by ftdi_write_eeprom(), and Ftdi::Context::reset().

◆ ftdi_tciflush()

int ftdi_tciflush ( struct ftdi_context ftdi)

Clears the read buffer on the chip and the internal read buffer. This is the correct behavior for an RX flush.

Parameters
ftdipointer to ftdi_context
Return values
0all fine
-1read buffer purge failed
-2USB device unavailable

Definition at line 1030 of file ftdi.c.

References FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_context::index, ftdi_context::readbuffer_offset, ftdi_context::readbuffer_remaining, SIO_RESET_REQUEST, SIO_TCIFLUSH, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by ftdi_tcioflush(), and Ftdi::Context::tcflush().

◆ ftdi_tcoflush()

int ftdi_tcoflush ( struct ftdi_context ftdi)

Clears the write buffer on the chip. This is correct behavior for a TX flush.

Parameters
ftdipointer to ftdi_context
Return values
0all fine
-1write buffer purge failed
-2USB device unavailable

Definition at line 1087 of file ftdi.c.

References FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_context::index, SIO_RESET_REQUEST, SIO_TCOFLUSH, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by ftdi_tcioflush(), and Ftdi::Context::tcflush().

◆ ftdi_tcioflush()

int ftdi_tcioflush ( struct ftdi_context ftdi)

Clears the RX and TX FIFOs on the chip and the internal read buffer. This is correct behavior for both RX and TX flush.

Parameters
ftdipointer to ftdi_context
Return values
0all fine
-1read buffer purge failed
-2write buffer purge failed
-3USB device unavailable

Definition at line 1137 of file ftdi.c.

References ftdi_error_return, ftdi_tciflush(), ftdi_tcoflush(), and ftdi_context::usb_dev.

Referenced by ftdi_readstream(), and Ftdi::Context::tcflush().

◆ DEPRECATED() [1/3]

int DEPRECATED ( ftdi_usb_purge_rx_buffer(struct ftdi_context *ftdi)  )

◆ DEPRECATED() [2/3]

int DEPRECATED ( ftdi_usb_purge_tx_buffer(struct ftdi_context *ftdi)  )

◆ DEPRECATED() [3/3]

int DEPRECATED ( ftdi_usb_purge_buffers(struct ftdi_context *ftdi)  )

◆ ftdi_set_baudrate()

int ftdi_set_baudrate ( struct ftdi_context ftdi,
int  baudrate 
)

Sets the chip baud rate

Parameters
ftdipointer to ftdi_context
baudratebaud rate to set
Return values
0all fine
-1invalid baudrate
-2setting baudrate failed
-3USB device unavailable

Definition at line 1448 of file ftdi.c.

References ftdi_context::bitbang_enabled, ftdi_error_return, and ftdi_context::usb_dev.

Referenced by Ftdi::Context::set_baud_rate().

◆ ftdi_set_line_property()

int ftdi_set_line_property ( struct ftdi_context ftdi,
enum ftdi_bits_type  bits,
enum ftdi_stopbits_type  sbit,
enum ftdi_parity_type  parity 
)

Set (RS232) line characteristics. The break type can only be set via ftdi_set_line_property2() and defaults to "off".

Parameters
ftdipointer to ftdi_context
bitsNumber of bits
sbitNumber of stop bits
parityParity mode
Return values
0all fine
-1Setting line property failed

Definition at line 1494 of file ftdi.c.

References BREAK_OFF, and ftdi_set_line_property2().

Referenced by Ftdi::Context::set_line_property().

◆ ftdi_set_line_property2()

int ftdi_set_line_property2 ( struct ftdi_context ftdi,
enum ftdi_bits_type  bits,
enum ftdi_stopbits_type  sbit,
enum ftdi_parity_type  parity,
enum ftdi_break_type  break_type 
)

Set (RS232) line characteristics

Parameters
ftdipointer to ftdi_context
bitsNumber of bits
sbitNumber of stop bits
parityParity mode
break_typeBreak type
Return values
0all fine
-1Setting line property failed
-2USB device unavailable

Definition at line 1513 of file ftdi.c.

References BREAK_OFF, BREAK_ON, EVEN, FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_context::index, MARK, NONE, ODD, SIO_SET_DATA_REQUEST, SPACE, STOP_BIT_1, STOP_BIT_15, STOP_BIT_2, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by ftdi_set_line_property(), and Ftdi::Context::set_line_property().

◆ ftdi_read_data()

int ftdi_read_data ( struct ftdi_context ftdi,
unsigned char *  buf,
int  size 
)

Reads data in chunks (see ftdi_read_data_set_chunksize()) from the chip.

Automatically strips the two modem status bytes transferred during every read.

Parameters
ftdipointer to ftdi_context
bufBuffer to store data in
sizeSize of the buffer
Return values
-666USB device unavailable
<0error code from libusb_bulk_transfer()
0no data was available
>0number of bytes read

Definition at line 2007 of file ftdi.c.

References ftdi_error_return, ftdi_context::max_packet_size, ftdi_context::out_ep, ftdi_context::readbuffer, ftdi_context::readbuffer_chunksize, ftdi_context::readbuffer_offset, ftdi_context::readbuffer_remaining, ftdi_context::usb_dev, and ftdi_context::usb_read_timeout.

Referenced by Ftdi::Context::read().

◆ ftdi_read_data_set_chunksize()

int ftdi_read_data_set_chunksize ( struct ftdi_context ftdi,
unsigned int  chunksize 
)

Configure read buffer chunk size. Default is 4096.

Automatically reallocates the buffer.

Parameters
ftdipointer to ftdi_context
chunksizeChunk size
Return values
0all fine
-1ftdi context invalid

Definition at line 2133 of file ftdi.c.

References ftdi_error_return, ftdi_context::readbuffer, ftdi_context::readbuffer_chunksize, ftdi_context::readbuffer_offset, and ftdi_context::readbuffer_remaining.

Referenced by ftdi_init(), and Ftdi::Context::set_read_chunk_size().

◆ ftdi_read_data_get_chunksize()

int ftdi_read_data_get_chunksize ( struct ftdi_context ftdi,
unsigned int *  chunksize 
)

Get read buffer chunk size.

Parameters
ftdipointer to ftdi_context
chunksizePointer to store chunk size in
Return values
0all fine
-1FTDI context invalid

Definition at line 2170 of file ftdi.c.

References ftdi_error_return, and ftdi_context::readbuffer_chunksize.

Referenced by Ftdi::Context::read_chunk_size().

◆ ftdi_write_data()

int ftdi_write_data ( struct ftdi_context ftdi,
const unsigned char *  buf,
int  size 
)

Writes data in chunks (see ftdi_write_data_set_chunksize()) to the chip

Parameters
ftdipointer to ftdi_context
bufBuffer with the data
sizeSize of the buffer
Return values
-666USB device unavailable
<0error code from usb_bulk_write()
>0number of bytes written

Definition at line 1583 of file ftdi.c.

References ftdi_error_return, ftdi_context::in_ep, ftdi_context::usb_dev, ftdi_context::usb_write_timeout, and ftdi_context::writebuffer_chunksize.

Referenced by Ftdi::Context::write().

◆ ftdi_write_data_set_chunksize()

int ftdi_write_data_set_chunksize ( struct ftdi_context ftdi,
unsigned int  chunksize 
)

Configure write buffer chunk size. Default is 4096.

Parameters
ftdipointer to ftdi_context
chunksizeChunk size
Return values
0all fine
-1ftdi context invalid

Definition at line 1965 of file ftdi.c.

References ftdi_error_return, and ftdi_context::writebuffer_chunksize.

Referenced by Ftdi::Context::set_write_chunk_size().

◆ ftdi_write_data_get_chunksize()

int ftdi_write_data_get_chunksize ( struct ftdi_context ftdi,
unsigned int *  chunksize 
)

Get write buffer chunk size.

Parameters
ftdipointer to ftdi_context
chunksizePointer to store chunk size in
Return values
0all fine
-1ftdi context invalid

Definition at line 1983 of file ftdi.c.

References ftdi_error_return, and ftdi_context::writebuffer_chunksize.

Referenced by Ftdi::Context::write_chunk_size().

◆ ftdi_readstream()

int ftdi_readstream ( struct ftdi_context ftdi,
FTDIStreamCallback callback,
void *  userdata,
int  packetsPerTransfer,
int  numTransfers 
)

Streaming reading of data from the device

Use asynchronous transfers in libusb-1.0 for high-performance streaming of data from a device interface back to the PC. This function continuously transfers data until either an error occurs or the callback returns a nonzero value. This function returns a libusb error code or the callback's return value.

For every contiguous block of received data, the callback will be invoked.

Parameters
ftdipointer to ftdi_context
callbackto user supplied function for one block of data
userdata
packetsPerTransfernumber of packets per transfer
numTransfersNumber of transfers per callback

Definition at line 151 of file ftdi_stream.c.

References BITMODE_RESET, ftdi_set_bitmode(), ftdi_tcioflush(), ftdi_context::max_packet_size, ftdi_context::out_ep, ftdi_context::type, TYPE_2232H, TYPE_232H, and ftdi_context::usb_dev.

◆ ftdi_write_data_submit()

struct ftdi_transfer_control * ftdi_write_data_submit ( struct ftdi_context ftdi,
unsigned char *  buf,
int  size 
)

Writes data to the chip. Does not wait for completion of the transfer nor does it make sure that the transfer was successful.

Use libusb 1.0 asynchronous API.

Parameters
ftdipointer to ftdi_context
bufBuffer with the data
sizeSize of the buffer
Return values
NULLSome error happens when submit transfer
!NULLPointer to a ftdi_transfer_control

Definition at line 1743 of file ftdi.c.

References ftdi_transfer_control::buf, ftdi_transfer_control::completed, ftdi_transfer_control::ftdi, ftdi_context::in_ep, ftdi_transfer_control::offset, ftdi_transfer_control::size, ftdi_transfer_control::transfer, ftdi_context::usb_dev, and ftdi_context::writebuffer_chunksize.

◆ ftdi_read_data_submit()

struct ftdi_transfer_control * ftdi_read_data_submit ( struct ftdi_context ftdi,
unsigned char *  buf,
int  size 
)

Reads data from the chip. Does not wait for completion of the transfer nor does it make sure that the transfer was successful.

Use libusb 1.0 asynchronous API.

Parameters
ftdipointer to ftdi_context
bufBuffer with the data
sizeSize of the buffer
Return values
NULLSome error happens when submit transfer
!NULLPointer to a ftdi_transfer_control

Definition at line 1805 of file ftdi.c.

References ftdi_transfer_control::buf, ftdi_transfer_control::completed, ftdi_transfer_control::ftdi, ftdi_transfer_control::offset, ftdi_context::out_ep, ftdi_context::readbuffer, ftdi_context::readbuffer_chunksize, ftdi_context::readbuffer_offset, ftdi_context::readbuffer_remaining, ftdi_transfer_control::size, ftdi_transfer_control::transfer, and ftdi_context::usb_dev.

◆ ftdi_transfer_data_done()

int ftdi_transfer_data_done ( struct ftdi_transfer_control tc)

Wait for completion of the transfer.

Use libusb 1.0 asynchronous API.

Parameters
tcpointer to ftdi_transfer_control
Return values
<0: Some error happens
>=0: Data size transferred

tc->transfer could be NULL if "(size <= ftdi->readbuffer_remaining)" at ftdi_read_data_submit(). Therefore, we need to check it here.

Definition at line 1884 of file ftdi.c.

References ftdi_transfer_control::completed, ftdi_transfer_control::ftdi, ftdi_transfer_control::offset, ftdi_transfer_control::transfer, and ftdi_context::usb_ctx.

◆ ftdi_transfer_data_cancel()

void ftdi_transfer_data_cancel ( struct ftdi_transfer_control tc,
struct timeval *  to 
)

Cancel transfer and wait for completion.

Use libusb 1.0 asynchronous API.

Parameters
tcpointer to ftdi_transfer_control
topointer to timeout value or NULL for infinite

Definition at line 1931 of file ftdi.c.

References ftdi_transfer_control::completed, ftdi_transfer_control::ftdi, ftdi_transfer_control::transfer, and ftdi_context::usb_ctx.

◆ ftdi_set_bitmode()

int ftdi_set_bitmode ( struct ftdi_context ftdi,
unsigned char  bitmask,
unsigned char  mode 
)

Enable/disable bitbang modes.

Parameters
ftdipointer to ftdi_context
bitmaskBitmask to configure lines. HIGH/ON value configures a line as output.
modeBitbang mode: use the values defined in ftdi_mpsse_mode
Return values
0all fine
-1can't enable bitbang mode
-2USB device unavailable

Definition at line 2191 of file ftdi.c.

References ftdi_context::bitbang_enabled, ftdi_context::bitbang_mode, BITMODE_RESET, FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_context::index, SIO_SET_BITMODE_REQUEST, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by ftdi_readstream(), and Ftdi::Context::set_bitmode().

◆ ftdi_disable_bitbang()

int ftdi_disable_bitbang ( struct ftdi_context ftdi)

Disable bitbang mode.

Parameters
ftdipointer to ftdi_context
Return values
0all fine
-1can't disable bitbang mode
-2USB device unavailable

Definition at line 2217 of file ftdi.c.

References ftdi_context::bitbang_enabled, FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_context::index, SIO_SET_BITMODE_REQUEST, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by Ftdi::Context::bitbang_disable().

◆ ftdi_read_pins()

int ftdi_read_pins ( struct ftdi_context ftdi,
unsigned char *  pins 
)

Directly read pin state, circumventing the read buffer. Useful for bitbang mode.

Parameters
ftdipointer to ftdi_context
pinsPointer to store pins into
Return values
0all fine
-1read pins failed
-2USB device unavailable

Definition at line 2240 of file ftdi.c.

References FTDI_DEVICE_IN_REQTYPE, ftdi_error_return, ftdi_context::index, SIO_READ_PINS_REQUEST, ftdi_context::usb_dev, and ftdi_context::usb_read_timeout.

Referenced by Ftdi::Context::read_pins().

◆ ftdi_set_latency_timer()

int ftdi_set_latency_timer ( struct ftdi_context ftdi,
unsigned char  latency 
)

Set latency timer

The FTDI chip keeps data in the internal buffer for a specific amount of time if the buffer is not full yet to decrease load on the usb bus.

Parameters
ftdipointer to ftdi_context
latencyValue between 1 and 255
Return values
0all fine
-1latency out of range
-2unable to set latency timer
-3USB device unavailable

Definition at line 2266 of file ftdi.c.

References FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_context::index, SIO_SET_LATENCY_TIMER_REQUEST, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by ftdi_write_eeprom(), and Ftdi::Context::set_latency().

◆ ftdi_get_latency_timer()

int ftdi_get_latency_timer ( struct ftdi_context ftdi,
unsigned char *  latency 
)

Get latency timer

Parameters
ftdipointer to ftdi_context
latencyPointer to store latency value in
Return values
0all fine
-1unable to get latency timer
-2USB device unavailable

Definition at line 2293 of file ftdi.c.

References FTDI_DEVICE_IN_REQTYPE, ftdi_error_return, ftdi_context::index, SIO_GET_LATENCY_TIMER_REQUEST, ftdi_context::usb_dev, and ftdi_context::usb_read_timeout.

Referenced by Ftdi::Context::latency().

◆ ftdi_poll_modem_status()

int ftdi_poll_modem_status ( struct ftdi_context ftdi,
unsigned short *  status 
)

Poll modem status information

This function allows the retrieve the two status bytes of the device. The device sends these bytes also as a header for each read access where they are discarded by ftdi_read_data(). The chip generates the two stripped status bytes in the absence of data every 40 ms.

Layout of the first byte:

  • B0..B3 - must be 0
  • B4 Clear to send (CTS) 0 = inactive 1 = active
  • B5 Data set ready (DTS) 0 = inactive 1 = active
  • B6 Ring indicator (RI) 0 = inactive 1 = active
  • B7 Receive line signal detect (RLSD) 0 = inactive 1 = active

Layout of the second byte:

  • B0 Data ready (DR)
  • B1 Overrun error (OE)
  • B2 Parity error (PE)
  • B3 Framing error (FE)
  • B4 Break interrupt (BI)
  • B5 Transmitter holding register (THRE)
  • B6 Transmitter empty (TEMT)
  • B7 Error in RCVR FIFO
Parameters
ftdipointer to ftdi_context
statusPointer to store status information in. Must be two bytes.
Return values
0all fine
-1unable to retrieve status information
-2USB device unavailable

Definition at line 2347 of file ftdi.c.

References FTDI_DEVICE_IN_REQTYPE, ftdi_error_return, ftdi_context::index, SIO_POLL_MODEM_STATUS_REQUEST, ftdi_context::usb_dev, and ftdi_context::usb_read_timeout.

Referenced by ftdi_write_eeprom(), and Ftdi::Context::poll_modem_status().

◆ ftdi_setflowctrl()

int ftdi_setflowctrl ( struct ftdi_context ftdi,
int  flowctrl 
)

Set flowcontrol for ftdi chip

Note: Do not use this function to enable XON/XOFF mode, use ftdi_setflowctrl_xonxoff() instead.

Parameters
ftdipointer to ftdi_context
flowctrlflow control to use. should be SIO_DISABLE_FLOW_CTRL, SIO_RTS_CTS_HS, SIO_DTR_DSR_HS
Return values
0all fine
-1set flow control failed
-2USB device unavailable

Definition at line 2375 of file ftdi.c.

References FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_context::index, SIO_SET_FLOW_CTRL_REQUEST, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by Ftdi::Context::set_flow_control().

◆ ftdi_setflowctrl_xonxoff()

int ftdi_setflowctrl_xonxoff ( struct ftdi_context ftdi,
unsigned char  xon,
unsigned char  xoff 
)

Set XON/XOFF flowcontrol for ftdi chip

Parameters
ftdipointer to ftdi_context
xoncharacter code used to resume transmission
xoffcharacter code used to pause transmission
Return values
0all fine
-1set flow control failed
-2USB device unavailable

Definition at line 2399 of file ftdi.c.

References FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_context::index, SIO_SET_FLOW_CTRL_REQUEST, SIO_XON_XOFF_HS, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

◆ ftdi_setdtr_rts()

int ftdi_setdtr_rts ( struct ftdi_context ftdi,
int  dtr,
int  rts 
)

Set dtr and rts line in one pass

Parameters
ftdipointer to ftdi_context
dtrDTR state to set line to (1 or 0)
rtsRTS state to set line to (1 or 0)
Return values
0all fine
-1set dtr/rts failed
-2USB device unavailable

Definition at line 2484 of file ftdi.c.

References FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_context::index, SIO_SET_DTR_HIGH, SIO_SET_DTR_LOW, SIO_SET_MODEM_CTRL_REQUEST, SIO_SET_RTS_HIGH, SIO_SET_RTS_LOW, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by Ftdi::Context::set_modem_control().

◆ ftdi_setdtr()

int ftdi_setdtr ( struct ftdi_context ftdi,
int  state 
)

Set dtr line

Parameters
ftdipointer to ftdi_context
statestate to set line to (1 or 0)
Return values
0all fine
-1set dtr failed
-2USB device unavailable

Definition at line 2423 of file ftdi.c.

References FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_context::index, SIO_SET_DTR_HIGH, SIO_SET_DTR_LOW, SIO_SET_MODEM_CTRL_REQUEST, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by Ftdi::Context::set_dtr().

◆ ftdi_setrts()

int ftdi_setrts ( struct ftdi_context ftdi,
int  state 
)

Set rts line

Parameters
ftdipointer to ftdi_context
statestate to set line to (1 or 0)
Return values
0all fine
-1set rts failed
-2USB device unavailable

Definition at line 2453 of file ftdi.c.

References FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_context::index, SIO_SET_MODEM_CTRL_REQUEST, SIO_SET_RTS_HIGH, SIO_SET_RTS_LOW, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by Ftdi::Context::set_rts().

◆ ftdi_set_event_char()

int ftdi_set_event_char ( struct ftdi_context ftdi,
unsigned char  eventch,
unsigned char  enable 
)

Set the special event character

Parameters
ftdipointer to ftdi_context
eventchEvent character
enable0 to disable the event character, non-zero otherwise
Return values
0all fine
-1unable to set event character
-2USB device unavailable

Definition at line 2520 of file ftdi.c.

References FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_context::index, SIO_SET_EVENT_CHAR_REQUEST, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by Ftdi::Context::set_event_char().

◆ ftdi_set_error_char()

int ftdi_set_error_char ( struct ftdi_context ftdi,
unsigned char  errorch,
unsigned char  enable 
)

Set error character

Parameters
ftdipointer to ftdi_context
errorchError character
enable0 to disable the error character, non-zero otherwise
Return values
0all fine
-1unable to set error character
-2USB device unavailable

Definition at line 2549 of file ftdi.c.

References FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_context::index, SIO_SET_ERROR_CHAR_REQUEST, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by Ftdi::Context::set_error_char().

◆ ftdi_eeprom_initdefaults()

int ftdi_eeprom_initdefaults ( struct ftdi_context ftdi,
char *  manufacturer,
char *  product,
char *  serial 
)

Init eeprom with default values for the connected device

Parameters
ftdipointer to ftdi_context
manufacturerString to use as Manufacturer
productString to use as Product description
serialString to use as Serial number description
Return values
0all fine
-1No struct ftdi_context
-2No struct ftdi_eeprom
-3No connected device or device not yet opened

Definition at line 2579 of file ftdi.c.

References ftdi_eeprom::cbus_function, CBUS_PWREN, CBUS_RXLED, CBUS_SLEEP, CBUS_TXDEN, CBUS_TXLED, CBUSH_TRISTATE, CBUSX_RXLED, CBUSX_SLEEP, CBUSX_TXDEN, CBUSX_TXLED, ftdi_context::eeprom, ftdi_error_return, ftdi_eeprom::manufacturer, ftdi_eeprom::max_power, ftdi_eeprom::product, ftdi_eeprom::product_id, ftdi_eeprom::release_number, ftdi_eeprom::serial, ftdi_eeprom::size, ftdi_context::type, TYPE_2232C, TYPE_2232H, TYPE_230X, TYPE_232H, TYPE_4232H, TYPE_AM, TYPE_BM, TYPE_R, ftdi_context::usb_dev, ftdi_eeprom::usb_version, ftdi_eeprom::use_serial, and ftdi_eeprom::vendor_id.

Referenced by Ftdi::Eeprom::init_defaults().

◆ ftdi_eeprom_build()

int ftdi_eeprom_build ( struct ftdi_context ftdi)

Build binary buffer from ftdi_eeprom structure. Output is suitable for ftdi_write_eeprom().

Parameters
ftdipointer to ftdi_context
Return values
>=0size of eeprom user area in bytes
-1eeprom size (128 bytes) exceeded by custom strings
-2Invalid eeprom or ftdi pointer
-3Invalid cbus function setting (FIXME: Not in the code?)
-4Chip doesn't support invert (FIXME: Not in the code?)
-5Chip doesn't support high current drive (FIXME: Not in the code?)
-6No connected EEPROM or EEPROM Type unknown

Definition at line 2910 of file ftdi.c.

References ftdi_eeprom::buf, ftdi_eeprom::chip, ftdi_context::eeprom, ftdi_error_return, FTDI_MAX_EEPROM_SIZE, ftdi_eeprom::in_is_isochronous, ftdi_eeprom::is_not_pnp, ftdi_eeprom::manufacturer, ftdi_eeprom::max_power, MAX_POWER_MILLIAMP_PER_UNIT, ftdi_eeprom::out_is_isochronous, ftdi_eeprom::product, ftdi_eeprom::product_id, ftdi_eeprom::release_number, ftdi_eeprom::remote_wakeup, ftdi_eeprom::self_powered, ftdi_eeprom::serial, ftdi_eeprom::size, ftdi_context::type, TYPE_2232C, TYPE_2232H, TYPE_230X, TYPE_232H, TYPE_4232H, TYPE_AM, TYPE_BM, TYPE_R, ftdi_eeprom::usb_version, ftdi_eeprom::use_serial, USE_SERIAL_NUM, ftdi_eeprom::use_usb_version, USE_USB_VERSION_BIT, and ftdi_eeprom::vendor_id.

Referenced by Ftdi::Eeprom::build().

◆ ftdi_eeprom_decode()

int ftdi_eeprom_decode ( struct ftdi_context ftdi,
int  verbose 
)

Decode binary EEPROM image into an ftdi_eeprom structure.

For FT-X devices use AN_201 FT-X MTP memory Configuration to decode.

Parameters
ftdipointer to ftdi_context
verboseDecode EEPROM on stdout
Return values
0all fine
-1something went wrong

FIXME: How to pass size? How to handle size field in ftdi_eeprom? FIXME: Strings are malloc'ed here and should be freed somewhere

Definition at line 3548 of file ftdi.c.

References ftdi_eeprom::buf, ftdi_eeprom::channel_a_type, ftdi_eeprom::chip, ftdi_context::eeprom, ftdi_error_return, ftdi_eeprom::in_is_isochronous, ftdi_eeprom::manufacturer, ftdi_eeprom::max_power, MAX_POWER_MILLIAMP_PER_UNIT, ftdi_eeprom::out_is_isochronous, ftdi_eeprom::product, ftdi_eeprom::product_id, ftdi_eeprom::release_number, ftdi_eeprom::remote_wakeup, ftdi_eeprom::self_powered, ftdi_eeprom::serial, ftdi_eeprom::size, ftdi_eeprom::suspend_pull_downs, ftdi_context::type, TYPE_2232C, TYPE_230X, TYPE_AM, TYPE_BM, ftdi_eeprom::usb_version, ftdi_eeprom::use_serial, USE_SERIAL_NUM, ftdi_eeprom::use_usb_version, USE_USB_VERSION_BIT, and ftdi_eeprom::vendor_id.

◆ ftdi_get_eeprom_value()

int ftdi_get_eeprom_value ( struct ftdi_context ftdi,
enum ftdi_eeprom_value  value_name,
int *  value 
)

Get a value from the decoded EEPROM structure

Parameters
ftdipointer to ftdi_context
value_nameEnum of the value to query
valuePointer to store read value
Return values
0all fine
-1Value doesn't exist

Definition at line 3978 of file ftdi.c.

References ftdi_eeprom::cbus_function, CBUS_FUNCTION_0, CBUS_FUNCTION_1, CBUS_FUNCTION_2, CBUS_FUNCTION_3, CBUS_FUNCTION_4, CBUS_FUNCTION_5, CBUS_FUNCTION_6, CBUS_FUNCTION_7, CBUS_FUNCTION_8, CBUS_FUNCTION_9, CHANNEL_A_DRIVER, ftdi_eeprom::channel_a_driver, CHANNEL_A_RS485, ftdi_eeprom::channel_a_rs485enable, CHANNEL_A_TYPE, ftdi_eeprom::channel_a_type, CHANNEL_B_DRIVER, ftdi_eeprom::channel_b_driver, CHANNEL_B_RS485, ftdi_eeprom::channel_b_rs485enable, CHANNEL_B_TYPE, ftdi_eeprom::channel_b_type, CHANNEL_C_DRIVER, ftdi_eeprom::channel_c_driver, CHANNEL_C_RS485, ftdi_eeprom::channel_c_rs485enable, CHANNEL_D_DRIVER, ftdi_eeprom::channel_d_driver, CHANNEL_D_RS485, ftdi_eeprom::channel_d_rs485enable, ftdi_eeprom::chip, CHIP_SIZE, CHIP_TYPE, CLOCK_POLARITY, ftdi_eeprom::clock_polarity, DATA_ORDER, ftdi_eeprom::data_order, ftdi_context::eeprom, EXTERNAL_OSCILLATOR, ftdi_eeprom::external_oscillator, FLOW_CONTROL, ftdi_eeprom::flow_control, ftdi_error_return, GROUP0_DRIVE, ftdi_eeprom::group0_drive, GROUP0_SCHMITT, ftdi_eeprom::group0_schmitt, GROUP0_SLEW, ftdi_eeprom::group0_slew, GROUP1_DRIVE, ftdi_eeprom::group1_drive, GROUP1_SCHMITT, ftdi_eeprom::group1_schmitt, GROUP1_SLEW, ftdi_eeprom::group1_slew, GROUP2_DRIVE, ftdi_eeprom::group2_drive, GROUP2_SCHMITT, ftdi_eeprom::group2_schmitt, GROUP2_SLEW, ftdi_eeprom::group2_slew, GROUP3_DRIVE, ftdi_eeprom::group3_drive, GROUP3_SCHMITT, ftdi_eeprom::group3_schmitt, GROUP3_SLEW, ftdi_eeprom::group3_slew, HIGH_CURRENT, ftdi_eeprom::high_current, HIGH_CURRENT_A, ftdi_eeprom::high_current_a, HIGH_CURRENT_B, ftdi_eeprom::high_current_b, IN_IS_ISOCHRONOUS, ftdi_eeprom::in_is_isochronous, INVERT, ftdi_eeprom::invert, IS_NOT_PNP, ftdi_eeprom::is_not_pnp, MAX_POWER, ftdi_eeprom::max_power, OUT_IS_ISOCHRONOUS, ftdi_eeprom::out_is_isochronous, POWER_SAVE, ftdi_eeprom::powersave, PRODUCT_ID, ftdi_eeprom::product_id, RELEASE_NUMBER, ftdi_eeprom::release_number, REMOTE_WAKEUP, ftdi_eeprom::remote_wakeup, SELF_POWERED, ftdi_eeprom::self_powered, ftdi_eeprom::size, SUSPEND_DBUS7, ftdi_eeprom::suspend_dbus7, SUSPEND_PULL_DOWNS, ftdi_eeprom::suspend_pull_downs, USB_VERSION, ftdi_eeprom::usb_version, USE_SERIAL, ftdi_eeprom::use_serial, USE_USB_VERSION, ftdi_eeprom::use_usb_version, VENDOR_ID, and ftdi_eeprom::vendor_id.

◆ ftdi_set_eeprom_value()

int ftdi_set_eeprom_value ( struct ftdi_context ftdi,
enum ftdi_eeprom_value  value_name,
int  value 
)

Set a value in the decoded EEPROM Structure No parameter checking is performed

Parameters
ftdipointer to ftdi_context
value_nameEnum of the value to set
valueto set
Return values
0all fine
-1Value doesn't exist
-2Value not user settable

Definition at line 4171 of file ftdi.c.

References ftdi_eeprom::cbus_function, CBUS_FUNCTION_0, CBUS_FUNCTION_1, CBUS_FUNCTION_2, CBUS_FUNCTION_3, CBUS_FUNCTION_4, CBUS_FUNCTION_5, CBUS_FUNCTION_6, CBUS_FUNCTION_7, CBUS_FUNCTION_8, CBUS_FUNCTION_9, CHANNEL_A_DRIVER, ftdi_eeprom::channel_a_driver, CHANNEL_A_RS485, ftdi_eeprom::channel_a_rs485enable, CHANNEL_A_TYPE, ftdi_eeprom::channel_a_type, CHANNEL_B_DRIVER, ftdi_eeprom::channel_b_driver, CHANNEL_B_RS485, ftdi_eeprom::channel_b_rs485enable, CHANNEL_B_TYPE, ftdi_eeprom::channel_b_type, CHANNEL_C_DRIVER, ftdi_eeprom::channel_c_driver, CHANNEL_C_RS485, ftdi_eeprom::channel_c_rs485enable, CHANNEL_D_DRIVER, ftdi_eeprom::channel_d_driver, CHANNEL_D_RS485, ftdi_eeprom::channel_d_rs485enable, ftdi_eeprom::chip, CHIP_SIZE, CHIP_TYPE, CLOCK_POLARITY, ftdi_eeprom::clock_polarity, DATA_ORDER, ftdi_eeprom::data_order, ftdi_context::eeprom, EXTERNAL_OSCILLATOR, ftdi_eeprom::external_oscillator, FLOW_CONTROL, ftdi_eeprom::flow_control, ftdi_error_return, GROUP0_DRIVE, ftdi_eeprom::group0_drive, GROUP0_SCHMITT, ftdi_eeprom::group0_schmitt, GROUP0_SLEW, ftdi_eeprom::group0_slew, GROUP1_DRIVE, ftdi_eeprom::group1_drive, GROUP1_SCHMITT, ftdi_eeprom::group1_schmitt, GROUP1_SLEW, ftdi_eeprom::group1_slew, GROUP2_DRIVE, ftdi_eeprom::group2_drive, GROUP2_SCHMITT, ftdi_eeprom::group2_schmitt, GROUP2_SLEW, ftdi_eeprom::group2_slew, GROUP3_DRIVE, ftdi_eeprom::group3_drive, GROUP3_SCHMITT, ftdi_eeprom::group3_schmitt, GROUP3_SLEW, ftdi_eeprom::group3_slew, HIGH_CURRENT, ftdi_eeprom::high_current, HIGH_CURRENT_A, ftdi_eeprom::high_current_a, HIGH_CURRENT_B, ftdi_eeprom::high_current_b, IN_IS_ISOCHRONOUS, ftdi_eeprom::in_is_isochronous, ftdi_eeprom::initialized_for_connected_device, INVERT, ftdi_eeprom::invert, IS_NOT_PNP, ftdi_eeprom::is_not_pnp, MAX_POWER, ftdi_eeprom::max_power, OUT_IS_ISOCHRONOUS, ftdi_eeprom::out_is_isochronous, POWER_SAVE, ftdi_eeprom::powersave, PRODUCT_ID, ftdi_eeprom::product_id, RELEASE_NUMBER, ftdi_eeprom::release_number, REMOTE_WAKEUP, ftdi_eeprom::remote_wakeup, SELF_POWERED, ftdi_eeprom::self_powered, SUSPEND_DBUS7, ftdi_eeprom::suspend_dbus7, SUSPEND_PULL_DOWNS, ftdi_eeprom::suspend_pull_downs, USB_VERSION, ftdi_eeprom::usb_version, USE_SERIAL, ftdi_eeprom::use_serial, USE_USB_VERSION, ftdi_eeprom::use_usb_version, USER_DATA_ADDR, ftdi_eeprom::user_data_addr, VENDOR_ID, and ftdi_eeprom::vendor_id.

◆ ftdi_get_eeprom_buf()

int ftdi_get_eeprom_buf ( struct ftdi_context ftdi,
unsigned char *  buf,
int  size 
)

Get the read-only buffer to the binary EEPROM content

Parameters
ftdipointer to ftdi_context
bufbuffer to receive EEPROM content
sizeSize of receiving buffer
Return values
0All fine
-1struct ftdi_contxt or ftdi_eeprom missing
-2Not enough room to store eeprom

Definition at line 4367 of file ftdi.c.

References ftdi_eeprom::buf, ftdi_context::eeprom, ftdi_error_return, FTDI_MAX_EEPROM_SIZE, and ftdi_eeprom::size.

◆ ftdi_set_eeprom_buf()

int ftdi_set_eeprom_buf ( struct ftdi_context ftdi,
const unsigned char *  buf,
int  size 
)

Set the EEPROM content from the user-supplied prefilled buffer

Parameters
ftdipointer to ftdi_context
bufbuffer to read EEPROM content
sizeSize of buffer
Return values
0All fine
-1struct ftdi_context or ftdi_eeprom or buf missing

Definition at line 4393 of file ftdi.c.

References ftdi_eeprom::buf, ftdi_context::eeprom, ftdi_error_return, FTDI_MAX_EEPROM_SIZE, and ftdi_eeprom::size.

◆ ftdi_set_eeprom_user_data()

int ftdi_set_eeprom_user_data ( struct ftdi_context ftdi,
const char *  buf,
int  size 
)

Set the EEPROM user data content from the user-supplied prefilled buffer

Parameters
ftdipointer to ftdi_context
bufbuffer to read EEPROM user data content
sizeSize of buffer
Return values
0All fine
-1struct ftdi_context or ftdi_eeprom or buf missing

Definition at line 4416 of file ftdi.c.

References ftdi_eeprom::buf, ftdi_context::eeprom, ftdi_error_return, ftdi_eeprom::size, ftdi_eeprom::user_data, and ftdi_eeprom::user_data_size.

◆ ftdi_read_eeprom()

int ftdi_read_eeprom ( struct ftdi_context ftdi)

Read eeprom

Parameters
ftdipointer to ftdi_context
Return values
0all fine
-1read failed
-2USB device unavailable

Definition at line 4461 of file ftdi.c.

References ftdi_eeprom::buf, ftdi_context::eeprom, FTDI_DEVICE_IN_REQTYPE, ftdi_error_return, FTDI_MAX_EEPROM_SIZE, SIO_READ_EEPROM_REQUEST, ftdi_eeprom::size, ftdi_context::type, TYPE_R, ftdi_context::usb_dev, and ftdi_context::usb_read_timeout.

Referenced by Ftdi::Eeprom::read().

◆ ftdi_read_chipid()

int ftdi_read_chipid ( struct ftdi_context ftdi,
unsigned int *  chipid 
)

Read the FTDIChip-ID from R-type devices

Parameters
ftdipointer to ftdi_context
chipidPointer to store FTDIChip-ID
Return values
0all fine
-1read failed
-2USB device unavailable

Definition at line 4520 of file ftdi.c.

References FTDI_DEVICE_IN_REQTYPE, ftdi_error_return, SIO_READ_EEPROM_REQUEST, ftdi_context::usb_dev, and ftdi_context::usb_read_timeout.

Referenced by Ftdi::Eeprom::chip_id().

◆ ftdi_write_eeprom()

int ftdi_write_eeprom ( struct ftdi_context ftdi)

Write eeprom

Parameters
ftdipointer to ftdi_context
Return values
0all fine
-1read failed
-2USB device unavailable
-3EEPROM not initialized for the connected device;

Definition at line 4614 of file ftdi.c.

References ftdi_eeprom::buf, ftdi_context::eeprom, FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_poll_modem_status(), ftdi_set_latency_timer(), ftdi_usb_reset(), ftdi_eeprom::initialized_for_connected_device, SIO_WRITE_EEPROM_REQUEST, ftdi_eeprom::size, ftdi_context::type, TYPE_230X, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by Ftdi::Eeprom::write().

◆ ftdi_erase_eeprom()

int ftdi_erase_eeprom ( struct ftdi_context ftdi)

◆ ftdi_read_eeprom_location()

int ftdi_read_eeprom_location ( struct ftdi_context ftdi,
int  eeprom_addr,
unsigned short *  eeprom_val 
)

Read eeprom location

Parameters
ftdipointer to ftdi_context
eeprom_addrAddress of eeprom location to be read
eeprom_valPointer to store read eeprom location
Return values
0all fine
-1read failed
-2USB device unavailable

Definition at line 4437 of file ftdi.c.

References ftdi_eeprom::buf, FTDI_DEVICE_IN_REQTYPE, ftdi_error_return, SIO_READ_EEPROM_REQUEST, ftdi_context::usb_dev, and ftdi_context::usb_read_timeout.

Referenced by ftdi_erase_eeprom(), ftdi_write_eeprom_location(), and Ftdi::Eeprom::read_location().

◆ ftdi_write_eeprom_location()

int ftdi_write_eeprom_location ( struct ftdi_context ftdi,
int  eeprom_addr,
unsigned short  eeprom_val 
)

Write eeprom location

Parameters
ftdipointer to ftdi_context
eeprom_addrAddress of eeprom location to be written
eeprom_valValue to be written
Return values
0all fine
-1write failed
-2USB device unavailable
-3Invalid access to checksum protected area below 0x80
-4Device can't access unprotected area
-5Reading chip type failed

Definition at line 4558 of file ftdi.c.

References FTDI_DEVICE_OUT_REQTYPE, ftdi_error_return, ftdi_read_eeprom_location(), SIO_WRITE_EEPROM_REQUEST, ftdi_context::type, TYPE_2232C, TYPE_2232H, TYPE_232H, TYPE_4232H, TYPE_BM, ftdi_context::usb_dev, and ftdi_context::usb_write_timeout.

Referenced by Ftdi::Eeprom::write_location().

◆ ftdi_get_error_string()

const char * ftdi_get_error_string ( struct ftdi_context ftdi)

Get string representation for last error code

Parameters
ftdipointer to ftdi_context
Return values
Pointerto error string

Definition at line 4731 of file ftdi.c.

References ftdi_context::error_str.

Referenced by Ftdi::Context::error_string().