| [ << ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
The Forms Library for the X Window system (or XForms for short) is a GUI toolkit with a rather long history. It was developed in the last decade of the last millenium by Dr. T. C. Zhao (then at the Department of Physics, University of Wisconsin-Milwaukee, USA) and Prof. Dr. Mark Overmars (Department of Computer Science, Utrecht University, Netherlands) at a time when there were hardly any alternatives except expensive packages. While at first being closed source it became open source software in 2002, distributed according to the Lesser GNU Public License (LGPLv2).
While development slowed down a bit while other toolkits became available and matured, XForms is still used, and development continues. While it may not be as polished as newer toolkits it has the advantage of being relatively small and thus easier to get started with it.
The XForms home page is at
The sources and mailing list are hosted on
https://savannah.nongnu.org/projects/xforms/
The source package can be downloaded from
http://download.savannah.gnu.org/releases/xforms/
while the git repository can be accessed via
git://git.savannah.nongnu.org/xforms.git
http://git.savannah.gnu.org/cgit/xforms.git
ssh://git.sv.gnu.org/srv/git/xforms.git
There also is a mailing list. You can subscribe to it at
http://lists.nongnu.org/mailman/listinfo/xforms-development
The archive of the mailing list can be found at
http://lists.gnu.org/archive/html/xforms-development/
The archive of messages from before August 2009 and going back until 1996 is at
http://xforms-toolkit.org/old-archive
Please write to the mailing list if you have questions or find bugs.
This document is based on the documentation for version 0.89 of the Forms Library. It has been reconstructed from the PDF version (the original sources seem to have been lost) and has been updated to cover all changes introduced since version 0.89.
In the following the preface for the last available version of the documentation (version 0.89 from June 2000) is reproduced. Please note that quite a bit of the information there-in is outdated. Many of the URLs mentioned don't exist anymore, email addresses have changed and the restrictions on the distribution of the library have been removed by the original authors in favor of the LGPL.
Preface of Version 0.89 (June 2000)
Window-based user interfaces are becoming a common and required feature for most computer systems, and as a result, users have come to expect all applications to have polished user-friendly interfaces. Unfortunately, constructing user interfaces for programs is in general a time consuming process. In the last few years a number of packages have appeared that help build up graphical user interfaces (so-called GUI's) in a simple way. Most of them, though, are difficult to use and/or expensive to buy and/or limited in their capabilities. The Forms Library was constructed to remedy this problem. The design goals when making the Forms Library were to create a package that is intuitive, simple to use, powerful, graphically good looking and easily extendible.
The main notion in the Forms Library is that of a form. A form is a window on which different objects are placed. Such a form is displayed and the user can interact with the different objects on the form to indicate his/her wishes. Many different classes of objects exist, like buttons (of many different flavors) that the user can push with the mouse, sliders with which the user can indicate a particular setting, input fields in which the user can provide textual input, menus from which the user can make choices, browsers in which the user can scroll through large amounts of text (e.g., help files), etc. Whenever the user changes the state of a particular object on one of the forms displayed the application program is notified and can take action accordingly. There are a number of different ways in which the application program can interact with the forms, ranging from very direct (waiting until something happens) to the use of callback routines that are called whenever an object changes state.
The application program has a large amount of control over how objects are drawn on the forms. It can set color, shape, text style, text size, text color, etc. In this way forms can be fine tuned to one's liking.
The Forms Library consists of a large number of C-routines to build up interaction forms with buttons, sliders, input fields, dials, etc. in a simple way. The routines can be used both in C and in C++ programs. The library uses only the services provided by the Xlib and should run on all workstations that have X installed on them. The current version needs 4bits of color (or grayscale) to look nice, but it will function properly on workstations having less depth (e.g., XForms works on B&W X-terminals).
The library is easy to use. Defining a form takes a few lines of code and interaction is fully handled by the library routines. A number of demo programs are provided to show how easy forms are built and used. For simple forms and those that may be frequently used in application programs, e.g., to ask a question or select a file name, special routines are provided. For example, to let the user choose a file in a graphical way (allowing him/her to walk through the directory hierarchy with a few mouse clicks) the application program needs to use just one line of code.
To make designing forms even easier a Form Designer is provided. This is a program that lets you interactively design forms and generate the corresponding C-code. You simply choose the objects you want to place on the forms from a list and draw them on a form. Next you can set attributes, change size and position of the objects, etc., all using the mouse.
Although this document describes all you need to know about using the Forms Library for X, it is not an X tutorial. On the contrary, details of programming in X are purposely hidden in the Forms Library interfaces, and one need not be an X-expert to use the Forms Library, although some knowledge of how X works would help to understand the inner workings of the Forms Library.
Forms Library and all the programs either described in this document or distributed as demos have been tested under X11 R4, R5 & R6 on all major UNIX platforms, including SGI, SUN, HP, IBM RS6000/AIX, Dec Alpha/OSF1, Linux(i386, alpha, m68k and sparc) as well as FreeBSD, NetBSD (i386, m68k and sparc), OpenBSD(i386, pmax, sparc, alpha), SCO and Unixware. Due to access and knowledge, testing on non-unix platforms such as OpenVMS, OS/2 and Microsoft/NT are less than comprehensive.
This document consists of four parts. The first part is a tutorial that provides an easy, informal introduction to the Forms Library. This part should be read by everybody that wants to use the library. You are encouraged to try variations of the demo programs distributed in the Forms Library package.
Part II describes the Form Designer with which you can design forms interactively and haveForm Designer write code for you.
Part III gives an overview of all object classes currently available in the library. The tutorial part only mentions the most basic classes but here you find a complete overview.
Adding new object classes to the system is not very complicated. Part IV describes how this should be done.
Version Note
The authors request that the following name(s) be used when referring to this toolkit
Forms Library for X,
Forms Library
or simply
XForms
Forms Library is not public domain. It is copyright (c) by T.C. Zhao and Mark Overmars, and others, with all published and unpublished rights reserved. However, permission to use for non-commercial and not-for-profit purposes is granted. You may not use xforms commercially (including in-house and contract/consulting use) without contacting (xforms@world.std.com) for a license arrangement. Use of xforms for the sole purpose of running a publically available free software that requires it is not considered a commercial use, even in a commercial setting.
You may not "bundle" and distribute this software with commercial systems without prior consent of the authors. Permission to distribute this software with other free software that requires it, including Linux CD distribution, is granted. Further, permission to re-package the software is granted.
This software is provided "as is" without warranty of any kind, either expressed or implied. The entire risk as to the quality and performance of the software is with you. Should the software prove defective, you assume the cost of all necessary servicing, repair or correction and under no circumstance shall the authors be liable for any damages resulting from the use or mis-use of this software.
It would be appreciated if credit to the authors is acknowledged in published articles on applications based on the library. A reprint of the article would also be appreciated.
The development environment for xforms consists of Linux 1.0.8/a.out X11R5 and Linux 2.0/ELF X11R6 with additional testing and validation on SGI R8000 and occasionally IBM RS6000/AIX and other machines. For every public release, most of the demos and some internal testing programs are run on each platform to ensure quality of the distribution.
Figures in this document were produced by fd2ps, a program that takes the output of the form designer and converts the form definition into an encapsulated POSTSCRIPT file. fd2ps as ofXForms V0.85 is included in the distribution.
This document is dated June 12, 2000.
Support
Although XForms has gone through extensive testing, there are most likely a number of bugs remaining. Your comments would be greatly appreciated. Please send any bug reports or suggestions to T.C. Zhao (tc_zhao@yahoo.com or xforms@world.std.com but not both). Please do not expect an immediate response, but we do appreciate your input and will do our best.
Bindings to other languages
As of this writing, the authors are aware of the following bindings
perl binding by Martin Bartlett (<martin@nitram.demon.co.uk>)
ada95 binding by G. Vincent Castellano (<gvc@ocsystems.com>)
Fortran binding by G. Groten (<zdv017@zam212.zam.kfa-juelich.de>) and Anke Haeming (<A.Haeming@kfa-juelich.de>)
pascal binding by Michael Van Canneyt (<michael@tfdec1.fys.kuleuven.ac.be>)
scm/guile binding by Johannes Leveling (<Johannes.Leveling@Informatik.Uni-Oldenburg.DE>)
python binding by Roberto Alsina (<ralsina@ultra7.unl.edu.ar>). (Seems the author has stopped working on this binding).
Follow the links on XForms's home page to get more info on these bindings.
Archive Sites
Permanent home for the Forms Library is at
ftp://ncmir.ucsd.edu/pub/xforms ftp://ftp.cs.ruu.nl/pub/XFORMS (Primary mirror site) |
The primary site is mirrored by many sites around the world. The following are some of the mirror sites
ftp://ftp.fu-berlin.de/unix/X11/gui/xforms ftp://gd.tuwien.ac.at/hci/xforms ftp://ftp.st.ryukoku.ac.jp/pub/X11/xforms ftp://ftp.via.ecp.fr/pub2/xforms ftp://ftp.unipi.it/pub/mirror/xforms ftp://ftp.uni-trier.de/pub/unix/X11/xforms |
Additional mirrors, html version of this document, news and other information related to XForms can be accessed through www via the following URL
http://world.std.com/~xforms |
In addition to ftp and www server, a mail server is available for those who do not have direct internet access.
To use the mail server, send a message to <mail-server@cs.ruu.nl> or the old-fashioned path alternative <uunet!mcsun!sun4nl!ruuinf!mail-server>.
The message should be something like the following
begin path fred@stone.age.edu (substitute your address) send help end |
To get a complete listing of the archive tree, issue send ls-lR.Z.
Mailing List
A mailing list for news and discussions about XForms is available. To subscribe or un-subscribe, send a message to <xforms-request@bob.usuhs.mil> with one of the following commands as the mail body
help subscribe unsubscribe |
To use the mailing list, send mail to <xforms@bob.usuhs.mil>. Please remember that the message will be sent to hundreds of people. Please Do not send subscribe/unsubscribe messages to the mailing list, send them to <xforms-request@bob.usuhs.mil>.
The mailing list archive is at
http://bob.usuhs.mil/mailserv/list-archives.
Thanks
Many people contributed, in one way or another, to the development of Forms Library, without whose testing, bug reports and suggestions, Forms Library would not be what it is today and would certainly not be in the relatively bug free state it is in now. We thank Steve Lamont of UCSD (<spl@szechuan.ucsd.edu>), for his numerous suggestions and voluminous contributions to the mailing list. We thank Erik Van Riper (<geek@midway.com>), formerly of CUNY, and Dr. Robert Williams of USUHS (<bob@bob.usuhs.mil>) for running the mailing list and keeping it running smoothly. We also thank every participant on the mailing list who contributed by asking questions and challenging our notion of what typical use of the Forms Library is. The html version of the document, undoubtedly browsed by the thousands, is courtesy of Danny Uy (<dau@westworld.com>). We appreciate the accurate and detailed bug reports, almost always accompanied with a demo program, from Gennady Sorokopud (<gena@NetVision.net.il>) and Rouben Rostamian (<rostamian@umbc.edu>). We also thank Martin Bartlett (<martin@nitram.demon.co.uk>), who, in addition to marrying Forms Library to perl, made several xforms API suggestions, Last but certainly not least, we thank Henrik Klagges (<henrik@UniX11.com>) for his numerous suggestions during the early stages of the development.
| [ << ] | [ >> ] | [Top] | [Contents] | [Index] | [ ? ] |
This document was generated by Build Daemon on October 16, 2020 using texi2html 1.82.