Measure how many bytes and messages pass through the filter. More...

#include <filters.h>

Inheritance diagram for MeterFilter:

Public Member Functions
	MeterFilter (BufferedTransformation *attachment=NULL, bool transparent=true)
	Construct a MeterFilter. More...

void	SetTransparent (bool transparent)
	Set or change the transparent mode of this object. More...

void	AddRangeToSkip (unsigned int message, lword position, lword size, bool sortNow=true)
	Adds a range to skip during processing. More...

void	ResetMeter ()
	Resets the meter. More...

void	IsolatedInitialize (const NameValuePairs &parameters)
	Initialize or reinitialize this object, without signal propagation. More...

lword	GetCurrentMessageBytes () const
	Number of bytes in the current message. More...

lword	GetTotalBytes () const
	Number of bytes processed by the filter. More...

unsigned int	GetCurrentSeriesMessages () const
	Message number in the series. More...

unsigned int	GetTotalMessages () const
	Number of messages in the message series. More...

unsigned int	GetTotalMessageSeries () const
	Number of messages processed by the filter. More...

byte *	CreatePutSpace (size_t &size)
	Request space which can be written into by the caller. More...

size_t	Put2 (const byte *inString, size_t length, int messageEnd, bool blocking)
	Input multiple bytes for processing. More...

size_t	PutModifiable2 (byte *inString, size_t length, int messageEnd, bool blocking)
	Input multiple bytes that may be modified by callee. More...

bool	IsolatedMessageSeriesEnd (bool blocking)
	Marks the end of a series of messages, without signal propagation. More...

Public Member Functions inherited from Bufferless< Filter >
bool	IsolatedFlush (bool hardFlush, bool blocking)
	Flushes data buffered by this object, without signal propagation. More...

Public Member Functions inherited from Filter
	Filter (BufferedTransformation *attachment=NULL)
	Construct a Filter. More...

bool	Attachable ()
	Determine if attachable. More...

BufferedTransformation *	AttachedTransformation ()
	Retrieve attached transformation. More...

const BufferedTransformation *	AttachedTransformation () const
	Retrieve attached transformation. More...

void	Detach (BufferedTransformation *newAttachment=NULL)
	Replace an attached transformation. More...

size_t	TransferTo2 (BufferedTransformation &target, lword &transferBytes, const std::string &channel=DEFAULT_CHANNEL, bool blocking=true)
	Transfer bytes from this object to another BufferedTransformation. More...

size_t	CopyRangeTo2 (BufferedTransformation &target, lword &begin, lword end=LWORD_MAX, const std::string &channel=DEFAULT_CHANNEL, bool blocking=true) const
	Copy bytes from this object to another BufferedTransformation. More...

void	Initialize (const NameValuePairs &parameters=g_nullNameValuePairs, int propagation=-1)
	Initialize or reinitialize this object, with signal propagation. More...

bool	Flush (bool hardFlush, int propagation=-1, bool blocking=true)
	Flush buffered input and/or output, with signal propagation. More...

bool	MessageSeriesEnd (int propagation=-1, bool blocking=true)
	Marks the end of a series of messages, with signal propagation. More...

Public Member Functions inherited from BufferedTransformation
	BufferedTransformation ()
	Construct a BufferedTransformation. More...

BufferedTransformation &	Ref ()
	Provides a reference to this object. More...

virtual void	Attach (BufferedTransformation *newAttachment)
	Add newAttachment to the end of attachment chain. More...

size_t	Put (byte inByte, bool blocking=true)
	Input a byte for processing. More...

size_t	Put (const byte *inString, size_t length, bool blocking=true)
	Input a byte buffer for processing. More...

size_t	PutWord16 (word16 value, ByteOrder order=BIG_ENDIAN_ORDER, bool blocking=true)
	Input a 16-bit word for processing. More...

size_t	PutWord32 (word32 value, ByteOrder order=BIG_ENDIAN_ORDER, bool blocking=true)
	Input a 32-bit word for processing. More...

size_t	PutWord64 (word64 value, ByteOrder order=BIG_ENDIAN_ORDER, bool blocking=true)
	Input a 64-bit word for processing. More...

virtual bool	CanModifyInput () const
	Determines whether input can be modified by the callee. More...

size_t	PutModifiable (byte *inString, size_t length, bool blocking=true)
	Input multiple bytes that may be modified by callee. More...

bool	MessageEnd (int propagation=-1, bool blocking=true)
	Signals the end of messages to the object. More...

size_t	PutMessageEnd (const byte *inString, size_t length, int propagation=-1, bool blocking=true)
	Input multiple bytes for processing and signal the end of a message. More...

unsigned int	GetMaxWaitObjectCount () const
	Retrieves the maximum number of waitable objects. More...

void	GetWaitObjects (WaitObjectContainer &container, CallStack const &callStack)
	Retrieves waitable objects. More...

virtual void	SetAutoSignalPropagation (int propagation)
	Set propagation of automatically generated and transferred signals. More...

virtual int	GetAutoSignalPropagation () const
	Retrieve automatic signal propagation value. More...

virtual lword	MaxRetrievable () const
	Provides the number of bytes ready for retrieval. More...

virtual bool	AnyRetrievable () const
	Determines whether bytes are ready for retrieval. More...

virtual size_t	Get (byte &outByte)
	Retrieve a 8-bit byte. More...

virtual size_t	Get (byte *outString, size_t getMax)
	Retrieve a block of bytes. More...

virtual size_t	Peek (byte &outByte) const
	Peek a 8-bit byte. More...

virtual size_t	Peek (byte *outString, size_t peekMax) const
	Peek a block of bytes. More...

size_t	GetWord16 (word16 &value, ByteOrder order=BIG_ENDIAN_ORDER)
	Retrieve a 16-bit word. More...

size_t	GetWord32 (word32 &value, ByteOrder order=BIG_ENDIAN_ORDER)
	Retrieve a 32-bit word. More...

size_t	GetWord64 (word64 &value, ByteOrder order=BIG_ENDIAN_ORDER)
	Retrieve a 64-bit word. More...

size_t	PeekWord16 (word16 &value, ByteOrder order=BIG_ENDIAN_ORDER) const
	Peek a 16-bit word. More...

size_t	PeekWord32 (word32 &value, ByteOrder order=BIG_ENDIAN_ORDER) const
	Peek a 32-bit word. More...

size_t	PeekWord64 (word64 &value, ByteOrder order=BIG_ENDIAN_ORDER) const
	Peek a 64-bit word. More...

lword	TransferTo (BufferedTransformation &target, lword transferMax=LWORD_MAX, const std::string &channel=DEFAULT_CHANNEL)
	move transferMax bytes of the buffered output to target as input More...

virtual lword	Skip (lword skipMax=LWORD_MAX)
	Discard skipMax bytes from the output buffer. More...

lword	CopyTo (BufferedTransformation &target, lword copyMax=LWORD_MAX, const std::string &channel=DEFAULT_CHANNEL) const
	Copy bytes from this object to another BufferedTransformation. More...

lword	CopyRangeTo (BufferedTransformation &target, lword position, lword copyMax=LWORD_MAX, const std::string &channel=DEFAULT_CHANNEL) const
	Copy bytes from this object using an index to another BufferedTransformation. More...

virtual lword	TotalBytesRetrievable () const
	Provides the number of bytes ready for retrieval. More...

virtual unsigned int	NumberOfMessages () const
	Provides the number of meesages processed by this object. More...

virtual bool	AnyMessages () const
	Determines if any messages are available for retrieval. More...

virtual bool	GetNextMessage ()
	Start retrieving the next message. More...

virtual unsigned int	SkipMessages (unsigned int count=UINT_MAX)
	Skip a number of meessages. More...

unsigned int	TransferMessagesTo (BufferedTransformation &target, unsigned int count=UINT_MAX, const std::string &channel=DEFAULT_CHANNEL)
	Transfer messages from this object to another BufferedTransformation. More...

unsigned int	CopyMessagesTo (BufferedTransformation &target, unsigned int count=UINT_MAX, const std::string &channel=DEFAULT_CHANNEL) const
	Copy messages from this object to another BufferedTransformation. More...

virtual void	SkipAll ()
	Skip all messages in the series.

void	TransferAllTo (BufferedTransformation &target, const std::string &channel=DEFAULT_CHANNEL)
	Transfer all bytes from this object to another BufferedTransformation. More...

void	CopyAllTo (BufferedTransformation &target, const std::string &channel=DEFAULT_CHANNEL) const
	Copy messages from this object to another BufferedTransformation. More...

virtual bool	GetNextMessageSeries ()
	Retrieve the next message in a series. More...

virtual unsigned int	NumberOfMessagesInThisSeries () const
	Provides the number of messages in a series. More...

virtual unsigned int	NumberOfMessageSeries () const
	Provides the number of messages in a series. More...

size_t	TransferMessagesTo2 (BufferedTransformation &target, unsigned int &messageCount, const std::string &channel=DEFAULT_CHANNEL, bool blocking=true)
	Transfer messages from this object to another BufferedTransformation. More...

size_t	TransferAllTo2 (BufferedTransformation &target, const std::string &channel=DEFAULT_CHANNEL, bool blocking=true)
	Transfer all bytes from this object to another BufferedTransformation. More...

size_t	ChannelPut (const std::string &channel, byte inByte, bool blocking=true)
	Input a byte for processing on a channel. More...

size_t	ChannelPut (const std::string &channel, const byte *inString, size_t length, bool blocking=true)
	Input a byte buffer for processing on a channel. More...

size_t	ChannelPutModifiable (const std::string &channel, byte *inString, size_t length, bool blocking=true)
	Input multiple bytes that may be modified by callee on a channel. More...

size_t	ChannelPutWord16 (const std::string &channel, word16 value, ByteOrder order=BIG_ENDIAN_ORDER, bool blocking=true)
	Input a 16-bit word for processing on a channel. More...

size_t	ChannelPutWord32 (const std::string &channel, word32 value, ByteOrder order=BIG_ENDIAN_ORDER, bool blocking=true)
	Input a 32-bit word for processing on a channel. More...

size_t	ChannelPutWord64 (const std::string &channel, word64 value, ByteOrder order=BIG_ENDIAN_ORDER, bool blocking=true)
	Input a 64-bit word for processing on a channel. More...

bool	ChannelMessageEnd (const std::string &channel, int propagation=-1, bool blocking=true)
	Signal the end of a message. More...

size_t	ChannelPutMessageEnd (const std::string &channel, const byte *inString, size_t length, int propagation=-1, bool blocking=true)
	Input multiple bytes for processing and signal the end of a message. More...

virtual byte *	ChannelCreatePutSpace (const std::string &channel, size_t &size)
	Request space which can be written into by the caller. More...

virtual size_t	ChannelPut2 (const std::string &channel, const byte *inString, size_t length, int messageEnd, bool blocking)
	Input multiple bytes for processing on a channel. More...

virtual size_t	ChannelPutModifiable2 (const std::string &channel, byte *inString, size_t length, int messageEnd, bool blocking)
	Input multiple bytes that may be modified by callee on a channel. More...

virtual bool	ChannelFlush (const std::string &channel, bool hardFlush, int propagation=-1, bool blocking=true)
	Flush buffered input and/or output on a channel. More...

virtual bool	ChannelMessageSeriesEnd (const std::string &channel, int propagation=-1, bool blocking=true)
	Marks the end of a series of messages on a channel. More...

virtual void	SetRetrievalChannel (const std::string &channel)
	Sets the default retrieval channel. More...

Public Member Functions inherited from Algorithm
	Algorithm (bool checkSelfTestStatus=true)
	Interface for all crypto algorithms. More...

virtual std::string	AlgorithmName () const
	Provides the name of this algorithm. More...

virtual std::string	AlgorithmProvider () const
	Retrieve the provider of this algorithm. More...

Public Member Functions inherited from Clonable
virtual Clonable *	Clone () const
	Copies this object. More...

Public Member Functions inherited from Waitable
virtual unsigned int	GetMaxWaitObjectCount () const =0
	Maximum number of wait objects that this object can return. More...

virtual void	GetWaitObjects (WaitObjectContainer &container, CallStack const &callStack)=0
	Retrieves waitable objects. More...

bool	Wait (unsigned long milliseconds, CallStack const &callStack)
	Wait on this object. More...

Detailed Description

Measure how many bytes and messages pass through the filter.

measure how many bytes and messages pass through the filter. The filter also serves as valve by maintaining a list of ranges to skip during processing.

Definition at line 232 of file filters.h.

Constructor & Destructor Documentation

◆ ~MeterFilter()

virtual MeterFilter::~MeterFilter ( )

inlinevirtual

Definition at line 235 of file filters.h.

◆ MeterFilter()

MeterFilter::MeterFilter	(	BufferedTransformation *	attachment = `NULL`,
		bool	transparent = `true`
	)

inline

Construct a MeterFilter.

Parameters

attachment	an optional attached transformation
transparent	flag indicating if the filter should function transparently

attachment can be NULL. The filter is transparent by default. If the filter is transparent, then PutMaybeModifiable() does not process a request and always returns 0.

Definition at line 242 of file filters.h.

Member Function Documentation

◆ SetTransparent()

void MeterFilter::SetTransparent ( bool transparent )

inline

Set or change the transparent mode of this object.

Parameters

transparent the new transparent mode

Definition at line 249 of file filters.h.

◆ AddRangeToSkip()

void MeterFilter::AddRangeToSkip	(	unsigned int	message,
		lword	position,
		lword	size,
		bool	sortNow = `true`
	)

Adds a range to skip during processing.

Parameters

message	the message to apply the range
position	the 0-based index in the current stream
size	the length of the range
sortNow	flag indicating whether the range should be sorted

Internally, MeterFilter maitains a deque of ranges to skip. As messages are processed, ranges of bytes are skipped according to the list of ranges.

◆ ResetMeter()

void MeterFilter::ResetMeter ( )

Resets the meter.

ResetMeter() reinitializes the meter by setting counters to 0 and removing previous skip ranges.

◆ IsolatedInitialize()

void MeterFilter::IsolatedInitialize ( const NameValuePairs & parameters )

inlinevirtual

Initialize or reinitialize this object, without signal propagation.

Parameters

parameters a set of NameValuePairs to initialize this object

Exceptions

NotImplemented

IsolatedInitialize() is used to initialize or reinitialize an object using a variable number of arbitrarily typed arguments. The function avoids the need for multiple constructors providing all possible combintations of configurable parameters.

IsolatedInitialize() does not call Initialize() on attached transformations. If initialization should be propagated, then use the Initialize() function.

If a derived class does not override IsolatedInitialize(), then the base class throws NotImplemented.

Reimplemented from BufferedTransformation.

Definition at line 266 of file filters.h.

◆ GetCurrentMessageBytes()

lword MeterFilter::GetCurrentMessageBytes ( ) const

inline

Number of bytes in the current message.

Returns: the number of bytes in the current message

Definition at line 271 of file filters.h.

◆ GetTotalBytes()

lword MeterFilter::GetTotalBytes ( ) const

inline

Number of bytes processed by the filter.

Returns: the number of bytes processed by the filter

Definition at line 275 of file filters.h.

◆ GetCurrentSeriesMessages()

unsigned int MeterFilter::GetCurrentSeriesMessages ( ) const

inline

Message number in the series.

Returns: the message number in the series

Definition at line 279 of file filters.h.

◆ GetTotalMessages()

unsigned int MeterFilter::GetTotalMessages ( ) const

inline

Number of messages in the message series.

Returns: the number of messages in the message series

Definition at line 283 of file filters.h.

◆ GetTotalMessageSeries()

unsigned int MeterFilter::GetTotalMessageSeries ( ) const

inline

Number of messages processed by the filter.

Returns: the number of messages processed by the filter

Definition at line 287 of file filters.h.

◆ CreatePutSpace()

byte * MeterFilter::CreatePutSpace ( size_t & size )

inlinevirtual

Request space which can be written into by the caller.

Parameters

size	the requested size of the buffer

Returns: byte pointer to the space to input data

The purpose of this method is to help avoid extra memory allocations.

size is an IN and OUT parameter and used as a hint. When the call is made, size is the requested size of the buffer. When the call returns, size is the size of the array returned to the caller.

The base class implementation sets size to 0 and returns NULL.

Note: Some objects, like ArraySink, cannot create a space because its fixed. In the case of an ArraySink, the pointer to the array is returned and the size is remaining size.

Reimplemented from BufferedTransformation.

Definition at line 290 of file filters.h.

◆ Put2()

size_t MeterFilter::Put2	(	const byte *	inString,
		size_t	length,
		int	messageEnd,
		bool	blocking
	)

virtual

Input multiple bytes for processing.

Parameters

inString	the byte buffer to process
length	the size of the string, in bytes
messageEnd	means how many filters to signal MessageEnd() to, including this one
blocking	specifies whether the object should block when processing input

Returns: the number of bytes that remain to be processed (i.e., bytes not processed). 0 indicates all bytes were processed.

Derived classes must implement Put2().

Implements BufferedTransformation.

◆ PutModifiable2()

size_t MeterFilter::PutModifiable2	(	byte *	inString,
		size_t	length,
		int	messageEnd,
		bool	blocking
	)

virtual

Input multiple bytes that may be modified by callee.

Parameters

inString	the byte buffer to process.
length	the size of the string, in bytes.
messageEnd	means how many filters to signal MessageEnd() to, including this one.
blocking	specifies whether the object should block when processing input.

Returns: the number of bytes that remain to be processed (i.e., bytes not processed). 0 indicates all bytes were processed.

Internally, PutModifiable2() calls Put2().

Reimplemented from BufferedTransformation.

◆ IsolatedMessageSeriesEnd()

bool MeterFilter::IsolatedMessageSeriesEnd ( bool blocking )

virtual

Marks the end of a series of messages, without signal propagation.

Parameters

blocking specifies whether the object should block when completing the processing on the current series of messages

Returns: true if the message was successful, false otherwise

Reimplemented from BufferedTransformation.

The documentation for this class was generated from the following file:

filters.h

Public Member Functions

Detailed Description

Constructor & Destructor Documentation

◆ ~MeterFilter()

◆ MeterFilter()

Member Function Documentation

◆ SetTransparent()

◆ AddRangeToSkip()

◆ ResetMeter()

◆ IsolatedInitialize()

◆ GetCurrentMessageBytes()

◆ GetTotalBytes()

◆ GetCurrentSeriesMessages()

◆ GetTotalMessages()

◆ GetTotalMessageSeries()

◆ CreatePutSpace()

◆ Put2()

◆ PutModifiable2()

◆ IsolatedMessageSeriesEnd()