The SoMaterial class is a node type for setting up material values for scene geometry.After traversing an SoMaterial node, subsequent shape nodes with geometry in the scene graph will use values from the material "pool" of the traversal state set up from nodes of this type. More...

#include <Inventor/nodes/SoMaterial.h>

Inheritance diagram for SoMaterial:

Public Member Functions
virtual SoType	getTypeId (void) const
	Returns the type identification of an object derived from a class inheriting SoBase. This is used for run-time type checking and "downward" casting. More...

	SoMaterial (void)

virtual void	doAction (SoAction *action)

virtual void	GLRender (SoGLRenderAction *action)

virtual void	callback (SoCallbackAction *action)

Public Member Functions inherited from SoNode
void	setOverride (const SbBool state)

SbBool	isOverride (void) const

void	setNodeType (const NodeType type)

NodeType	getNodeType (void) const

virtual SoNode *	copy (SbBool copyconnections=FALSE) const

virtual SbBool	affectsState (void) const

virtual void	GLRenderBelowPath (SoGLRenderAction *action)

virtual void	GLRenderInPath (SoGLRenderAction *action)

virtual void	GLRenderOffPath (SoGLRenderAction *action)

virtual void	getBoundingBox (SoGetBoundingBoxAction *action)

virtual void	getMatrix (SoGetMatrixAction *action)

virtual void	handleEvent (SoHandleEventAction *action)

virtual void	pick (SoPickAction *action)

virtual void	rayPick (SoRayPickAction *action)

virtual void	search (SoSearchAction *action)

virtual void	write (SoWriteAction *action)

virtual void	audioRender (SoAudioRenderAction *action)

virtual void	getPrimitiveCount (SoGetPrimitiveCountAction *action)

virtual void	grabEventsSetup (void)

virtual void	grabEventsCleanup (void)

virtual void	startNotify (void)

uint32_t	getNodeId (void) const

virtual SoChildList *	getChildren (void) const

virtual void	writeInstance (SoOutput *out)

virtual SoNode *	addToCopyDict (void) const

virtual void	copyContents (const SoFieldContainer *from, SbBool copyconnections)

virtual SoFieldContainer *	copyThroughConnection (void) const

Public Member Functions inherited from SoFieldContainer
void	setToDefaults (void)

SbBool	hasDefaultValues (void) const

SbBool	fieldsAreEqual (const SoFieldContainer *container) const

void	copyFieldValues (const SoFieldContainer *container, SbBool copyconnections=FALSE)

SbBool	set (const char *const fielddata)

void	get (SbString &fielddata)

virtual int	getFields (SoFieldList &l) const

virtual int	getAllFields (SoFieldList &l) const

virtual SoField *	getField (const SbName &name) const

virtual SoField *	getEventIn (const SbName &name) const

virtual SoField *	getEventOut (const SbName &name) const

SbBool	getFieldName (const SoField *const field, SbName &name) const

SbBool	enableNotify (const SbBool flag)

SbBool	isNotifyEnabled (void) const

SbBool	set (const char fielddata, SoInput input)

void	get (SbString &fielddata, SoOutput *out)

virtual SbBool	validateNewFieldValue (SoField field, void newval)

virtual void	addWriteReference (SoOutput *out, SbBool isfromfield=FALSE)

SbBool	getIsBuiltIn (void) const

virtual void	getFieldsMemorySize (size_t &managed, size_t &unmanaged) const

void	setUserData (void *userdata) const

void *	getUserData (void) const

Public Member Functions inherited from SoBase
void	ref (void) const

void	unref (void) const

void	unrefNoDelete (void) const

int32_t	getRefCount (void) const

void	touch (void)

SbBool	isOfType (SoType type) const
	Returns `TRUE` if the type of this object is either of the same type or inherited from type. More...

virtual SbName	getName (void) const

virtual void	setName (const SbName &newname)

void	addAuditor (void *const auditor, const SoNotRec::Type type)

void	removeAuditor (void *const auditor, const SoNotRec::Type type)

const SoAuditorList &	getAuditors (void) const

SbBool	shouldWrite (void)

void	assertAlive (void) const

Static Public Member Functions
static SoType	getClassTypeId (void)

static void	initClass (void)

Static Public Member Functions inherited from SoNode
static uint32_t	getCompatibilityTypes (const SoType &nodetype)

static SoType	getClassTypeId (void)

static SoNode *	getByName (const SbName &name)

static int	getByName (const SbName &name, SoNodeList &l)

static void	initClass (void)

static void	initClasses (void)

static uint32_t	getNextNodeId (void)

static int	getActionMethodIndex (const SoType type)

static void	getBoundingBoxS (SoAction action, SoNode node)

static void	GLRenderS (SoAction action, SoNode node)

static void	callbackS (SoAction action, SoNode node)

static void	getMatrixS (SoAction action, SoNode node)

static void	handleEventS (SoAction action, SoNode node)

static void	pickS (SoAction action, SoNode node)

static void	rayPickS (SoAction action, SoNode node)

static void	searchS (SoAction action, SoNode node)

static void	writeS (SoAction action, SoNode node)

static void	audioRenderS (SoAction action, SoNode node)

static void	getPrimitiveCountS (SoAction action, SoNode node)

Static Public Member Functions inherited from SoFieldContainer
static void	initClass (void)

static SoType	getClassTypeId (void)

static void	cleanupClass (void)

static void	initCopyDict (void)

static void	addCopy (const SoFieldContainer orig, const SoFieldContainer copy)

static SoFieldContainer *	checkCopy (const SoFieldContainer *orig)

static SoFieldContainer *	findCopy (const SoFieldContainer *orig, const SbBool copyconnections)

static void	copyDone (void)

Static Public Member Functions inherited from SoBase
static void	initClass (void)
	Sets up initialization for data common to all instances of this class, like submitting necessary information to the Coin type system.

static SoType	getClassTypeId (void)
	This static method returns the SoType object associated with objects of this class.

static void	addName (SoBase const base, const char const name)

static void	removeName (SoBase const base, const char const name)

static void	incrementCurrentWriteCounter (void)

static void	decrementCurrentWriteCounter (void)

static SoBase *	getNamedBase (const SbName &name, SoType type)

static int	getNamedBases (const SbName &name, SoBaseList &baselist, SoType type)

static SbBool	read (SoInput input, SoBase &base, SoType expectedtype)

static void	setInstancePrefix (const SbString &c)

static void	setTraceRefs (SbBool trace)

static SbBool	getTraceRefs (void)

static SbBool	connectRoute (SoInput *input, const SbName &fromnodename, const SbName &fromfieldname, const SbName &tonodename, const SbName &tofieldname)

static SbBool	readRoute (SoInput *input)

Public Attributes
SoMFColor	ambientColor

SoMFColor	diffuseColor

SoMFColor	specularColor

SoMFColor	emissiveColor

SoMFFloat	shininess

SoMFFloat	transparency

Protected Member Functions
virtual const SoFieldData *	getFieldData (void) const

virtual	~SoMaterial ()

virtual void	notify (SoNotList *list)

Protected Member Functions inherited from SoNode
	SoNode (void)

virtual	~SoNode ()

virtual SbBool	readInstance (SoInput *in, unsigned short flags)

Protected Member Functions inherited from SoFieldContainer
	SoFieldContainer (void)

virtual	~SoFieldContainer ()

Protected Member Functions inherited from SoBase
	SoBase (void)

virtual	~SoBase ()

virtual void	destroy (void)

SbBool	hasMultipleWriteRefs (void) const

SbBool	writeHeader (SoOutput *out, SbBool isgroup, SbBool isengine) const

void	writeFooter (SoOutput *out) const

virtual const char *	getFileFormatName (void) const

virtual SoNotRec	createNotRec (void)

Static Protected Member Functions
static const SoFieldData **	getFieldDataPtr (void)

Static Protected Member Functions inherited from SoNode
static const SoFieldData **	getFieldDataPtr (void)

static void	setNextActionMethodIndex (int index)

static int	getNextActionMethodIndex (void)

static void	incNextActionMethodIndex (void)

static void	setCompatibilityTypes (const SoType &nodetype, const uint32_t bitmask)

Static Protected Member Functions inherited from SoBase
static uint32_t	getCurrentWriteCounter (void)

static void	staticDataLock (void)

static void	staticDataUnlock (void)

Additional Inherited Members
Public Types inherited from SoNode
enum	NodeType { INVENTOR = 0x0000, VRML1 = 0x0001, VRML2 = 0x0002, INVENTOR_1 = 0x0004, INVENTOR_2_0 = 0x0008, INVENTOR_2_1 = 0x0010, INVENTOR_2_5 = 0x0020, INVENTOR_2_6 = 0x0040, COIN_1_0 = 0x0080, COIN_2_0 = 0x0100, EXTENSION = 0x0200, COIN_2_2 = 0x0400, COIN_2_3 = 0x0800, COIN_2_4 = 0x1000, INVENTOR_5_0 = 0x2000, COIN_2_5 = 0x4000, COIN_3_0 = 0x8000, INVENTOR_6_0 = 0x10000, COIN_4_0 = 0x20000 }

Protected Types inherited from SoBase
enum	BaseFlags { IS_ENGINE = 0x01, IS_GROUP = 0x02 }

Protected Attributes inherited from SoNode
uint32_t	uniqueId

Protected Attributes inherited from SoFieldContainer
SbBool	isBuiltIn

Static Protected Attributes inherited from SoNode
static uint32_t	nextUniqueId = 1

static int	nextActionMethodIndex = 0

Detailed Description

The SoMaterial class is a node type for setting up material values for scene geometry.

After traversing an SoMaterial node, subsequent shape nodes with geometry in the scene graph will use values from the material "pool" of the traversal state set up from nodes of this type.

For detailed information on the various components, see the OpenGL color model, presented in the chapter "Colors and Coloring" (chapter 2.13 in the OpenGL 1.4 specification).

Note that values from a material node will replace the previous values from the traversal state, they will not accumulate. That's the case even when e.g. material changes are implicit in an iv-file, as illustrated by the following example:

Also note that support for multiple values in ambientColor, emissiveColor, specularColor and shininess was obsoleted in Open Inventor 2.1. The reason for this design change was performance driven, since it's relatively slow to change the OpenGL material properties. Changing the diffuse color value is fast though, so it's still possible to have multiple diffuseColor and transparency values.

#Inventor V2.1 ascii

Material { ambientColor 1 0 0 }
Cone { }

Translation { translation 5 0 0 }

Material { }
Sphere { }

(The SoSphere will not "inherit" the SoMaterial::ambientColor from the first SoMaterial node, even though it is not explicitly set in the second material node. The default value of SoMaterial::ambientColor will be used.)

Note that nodes imported as part of a VRML V1.0 file has a special case, where the fields SoMaterial::ambientColor, SoMaterial::diffuseColor and SoMaterial::specularColor contains zero values, and SoMaterial::emissiveColor contains one or more values. The values in SoMaterial::emissiveColor should then be treated as precalculated lighting, and the other fields should be ignored.

You can detect this case by checking the values of the material elements when the scene graph is traversed using an SoCallbackAction. SoDiffuseColorElement, SoAmbientColorElement, and SoSpecularColorElement will contain one value with a completely black color (0.0f, 0.0f, 0.0f), SoShininessElement will contain one value of 0.0f, and SoEmissiveColorElement will contain one or more values. It is done like this to make rendering work correctly on systems that do not test for this specific case.

You should only check for this case when you're traversing a VRML V1.0 file scene graph, of course. See SoNode::getNodeType() for information about how nodes can be tested for whether or not they have been imported or otherwise set up as of VRML1 type versus Inventor type.

When the scene graph is rendered using an SoGLRenderAction, the elements will be set differently to optimize rendering. The SoDiffuseColorElement will be set to the values in SoMaterial::emissiveColor, and the light model will be set to SoLightModel::BASE_COLOR.

The SoMaterial::transparency values will always be treated normally.

Here is a very simple usage example:

#Inventor V2.1 ascii

Separator {
   Coordinate3 {
      point [ 0 0 0, 1 0 0, 1 1 0 ]
   }

   Material {
      diffuseColor [ 1 0 0, 1 1 0, 0 0 1 ]
   }

   MaterialBinding {
      value PER_VERTEX
   }

   IndexedFaceSet {
      coordIndex [ 0, 1, 2, -1 ]
   }
}

FILE FORMAT/DEFAULTS:

Material {
    ambientColor 0.2 0.2 0.2
    diffuseColor 0.8 0.8 0.8
    specularColor 0 0 0
    emissiveColor 0 0 0
    shininess 0.2
    transparency 0
}

See also: SoMaterialBinding, SoBaseColor, SoPackedColor

Constructor & Destructor Documentation

SoMaterial::SoMaterial ( void )

Constructor.

SoMaterial::~SoMaterial ( )

protectedvirtual

Destructor.

Member Function Documentation

SoType SoMaterial::getTypeId ( void ) const

virtual

Returns the type identification of an object derived from a class inheriting SoBase. This is used for run-time type checking and "downward" casting.

Usage example:

void foo(SoNode * node)
{
  if (node->getTypeId() == SoFile::getClassTypeId()) {
    SoFile * filenode = (SoFile *)node;  // safe downward cast, knows the type
  }
}

For application programmers wanting to extend the library with new nodes, engines, nodekits, draggers or others: this method needs to be overridden in all subclasses. This is typically done as part of setting up the full type system for extension classes, which is usually accomplished by using the pre-defined macros available through for instance Inventor/nodes/SoSubNode.h (SO_NODE_INIT_CLASS and SO_NODE_CONSTRUCTOR for node classes), Inventor/engines/SoSubEngine.h (for engine classes) and so on.

For more information on writing Coin extensions, see the class documentation of the toplevel superclasses for the various class groups.

Implements SoBase.

const SoFieldData * SoMaterial::getFieldData ( void ) const

protectedvirtual

Returns a pointer to the class-wide field data storage object for this instance. If no fields are present, returns NULL.

Reimplemented from SoFieldContainer.

void SoMaterial::doAction ( SoAction * action )

virtual

This function performs the typical operation of a node for any action.

Reimplemented from SoNode.

void SoMaterial::GLRender ( SoGLRenderAction * action )

virtual

Action method for the SoGLRenderAction.

This is called during rendering traversals. Nodes influencing the rendering state in any way or who wants to throw geometry primitives at OpenGL overrides this method.

Reimplemented from SoNode.

void SoMaterial::callback ( SoCallbackAction * action )

virtual

Action method for SoCallbackAction.

Simply updates the state according to how the node behaves for the render action, so the application programmer can use the SoCallbackAction for extracting information about the scene graph.

Reimplemented from SoNode.

void SoMaterial::notify ( SoNotList * l )

protectedvirtual

Notifies all auditors for this instance when changes are made.

Reimplemented from SoNode.

Member Data Documentation

SoMFColor SoMaterial::ambientColor

Ambient material part color values. Will by default contain a single color value of [0.2, 0.2, 0.2] (ie dark gray).

The ambient part of the material is not influenced by any lightsources, and should be thought of conceptually as the constant, but small contribution of light to a scene "seeping in" from everywhere.

(Think of the ambient contribution in the context that there's always photons fizzing around everywhere – even in a black, lightsource-less room, for instance).

Only the first value in this field will be used. All other values will be ignored.

See also: SoEnvironment::ambientIntensity

SoMFColor SoMaterial::diffuseColor

Diffuse material part color values. This field is by default initialized to contain a single color value of [0.8, 0.8, 0.8] (light gray).

The diffuse part is combined with the light emitted from the scene's light sources.

Traditional Open Inventor uses the same override bit for both diffuse color and transparency. To get around this problem if you need to override one without the other, set the environment variable "COIN_SEPARATE_DIFFUSE_TRANSPARENCY_OVERRIDE". This is a Coin extension, and will not work on the other Open Inventor implementations.

SoMFColor SoMaterial::specularColor

Specular material part color values. Defaults to a single color value of [0, 0, 0] (black).

Only the first value in this field will be used. All other values will be ignored.

SoMFColor SoMaterial::emissiveColor

The color of the light "emitted" by the subsequent geometry, independent of lighting / shading.

Defaults to contain a single color value of [0, 0, 0] (black, ie no contribution).

Only the first value in this field will be used. All other values will be ignored.

SoMFFloat SoMaterial::shininess

Shininess values. Decides how the light from light sources are distributed across the geometry surfaces. Valid range is from 0.0 (which gives a dim appearance), to 1.0 (glossy-looking surfaces).

Defaults to contain a single value of 0.2.

Only the first value in this field will be used. All other values will be ignored.

SoMFFloat SoMaterial::transparency

Transparency values. Valid range is from 0.0 (completely opaque, which is the default) to 1.0 (completely transparent, i.e. invisible).

Defaults to contain a single value of 0.0.

Traditional Open Inventor uses the same override bit for both transparency and diffuse color. To get around this problem if you need to override one without the other, set the environment variable "COIN_SEPARATE_DIFFUSE_TRANSPARENCY_OVERRIDE". This is a Coin extension, and will not work on the other Open Inventor implementations.

The documentation for this class was generated from the following files:

SoMaterial.h
SoMaterial.cpp

Public Member Functions

Static Public Member Functions

Public Attributes

Protected Member Functions

Static Protected Member Functions

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation