The SoMField class is the base class for fields which can contain multiple values.All field types which may contain more than one member value inherits this class. SoMField is an abstract class. More...

#include <Inventor/fields/SoMField.h>

Inheritance diagram for SoMField:

Public Member Functions
virtual	~SoMField ()

int	getNum (void) const

void	setNum (const int num)

virtual void	deleteValues (int start, int num=-1)

virtual void	insertSpace (int start, int num)

SbBool	set1 (const int index, const char *const valuestring)

void	get1 (const int index, SbString &valuestring)

virtual void	enableDeleteValues (void)

virtual SbBool	isDeleteValuesEnabled (void) const

Public Member Functions inherited from SoField
virtual	~SoField ()

void	setIgnored (SbBool ignore)

SbBool	isIgnored (void) const

void	setDefault (SbBool defaultVal)

SbBool	isDefault (void) const

virtual SoType	getTypeId (void) const =0

SbBool	isOfType (const SoType type) const

void	enableConnection (SbBool flag)

SbBool	isConnectionEnabled (void) const

SbBool	connectFrom (SoEngineOutput *master, SbBool notnotify=FALSE, SbBool append=FALSE)

SbBool	appendConnection (SoEngineOutput *master, SbBool notnotify=FALSE)

void	disconnect (SoEngineOutput *engineoutput)

SbBool	isConnectedFromEngine (void) const

SbBool	getConnectedEngine (SoEngineOutput *&master) const

SbBool	connectFrom (SoField *master, SbBool notnotify=FALSE, SbBool append=FALSE)

SbBool	appendConnection (SoField *master, SbBool notnotify=FALSE)

void	disconnect (SoField *field)

SbBool	isConnectedFromField (void) const

SbBool	getConnectedField (SoField *&master) const

int	getNumConnections (void) const

int	getForwardConnections (SoFieldList &slavelist) const

int	getConnections (SoFieldList &masterlist) const

void	disconnect (void)

SbBool	isConnected (void) const

void	setContainer (SoFieldContainer *cont)

SoFieldContainer *	getContainer (void) const

SbBool	set (const char *valuestring)

void	get (SbString &valuestring)

SbBool	shouldWrite (void) const

virtual void	touch (void)

virtual void	startNotify (void)

virtual void	notify (SoNotList *nlist)

SbBool	enableNotify (SbBool on)

SbBool	isNotifyEnabled (void) const

void	addAuditor (void *f, SoNotRec::Type type)

void	removeAuditor (void *f, SoNotRec::Type type)

int	operator== (const SoField &f) const

int	operator!= (const SoField &f) const

virtual void	connectionStatusChanged (int numconnections)

SbBool	isReadOnly (void) const

virtual SbBool	isSame (const SoField &f) const =0

virtual void	copyFrom (const SoField &f)=0

virtual void	fixCopy (SbBool copyconnections)

virtual SbBool	referencesCopy (void) const

void	copyConnection (const SoField *fromfield)

virtual SbBool	read (SoInput *input, const SbName &name)

virtual void	write (SoOutput *out, const SbName &name) const

virtual void	countWriteRefs (SoOutput *out) const

void	setFieldType (int type)

int	getFieldType (void) const

SbBool	getDirty (void) const

void	setDirty (SbBool dirty)

void	evaluate (void) const

Static Public Member Functions
static SoType	getClassTypeId (void)

static void	atexit_cleanup (void)

static void	initClass (void)

Static Public Member Functions inherited from SoField
static void	initClass (void)

static void	initClasses (void)

static void	cleanupClass (void)

static SoType	getClassTypeId (void)

Protected Member Functions
	SoMField (void)

virtual void	makeRoom (int newnum)

virtual SoNotRec	createNotRec (SoBase *container)

void	setChangedIndex (const int chgidx)

void	setChangedIndices (const int chgidx=-1, const int numchgind=0)

Protected Member Functions inherited from SoField
	SoField (void)

void	valueChanged (SbBool resetdefault=TRUE)

virtual void	evaluateConnection (void) const

virtual SbBool	readConnection (SoInput *in)

virtual void	writeConnection (SoOutput *out) const

SbBool	isDestructing (void) const

Protected Attributes
int	num

int	maxNum

SbBool	userDataIsUsed

Additional Inherited Members
Public Types inherited from SoField
enum	FieldType { NORMAL_FIELD = 0, EVENTIN_FIELD, EVENTOUT_FIELD, EXPOSED_FIELD }

Detailed Description

The SoMField class is the base class for fields which can contain multiple values.

All field types which may contain more than one member value inherits this class. SoMField is an abstract class.

Use setValue(), setValues() or set1Value() to set the values of fields inheriting SoMField, and use getValues() or the index operator [] to read values. Example code:

SoText2 * textnode = new SoText2;
textnode->ref();
// Setting multi-field values. /////////////////////////////
// Set the first value of the SoMFString field of the SoText2 node.
// The field array will be truncated to only contain this single value.
textnode->string.setValue("Morten");
// Full contents of the SoMFString is: [ "Morten" ]
// The setValue() method and the = operator is interchangeable,
// so this code line does the same as the previous line.
textnode->string = "Peder";
// Full contents of the SoMFString is now: [ "Peder" ]
// Set the value at index 2. If the field value array contained
// less than 3 elements before this call, first expand it to contain
// 3 elements.
textnode->string.set1Value(2, "Lars");
// Full contents of the SoMFString is: [ "Peder", <undefined>, "Lars" ]
// This sets 3 values of the array, starting at index 5. If the
// array container had less than 8 elements before the setValues()
// call, the array will first be expanded.
SbString s[3] = { "Eriksen", "Blekken", "Aas" };
textnode->string.setValues(5, sizeof(s) / sizeof(s[0]), s);
// Full contents of the SoMFString is now:
//     [ "Peder", <undefined>, "Lars", <undefined>, <undefined>,
//       "Eriksen", "Blekken", "Aas" ]
// Note also that the setValues() call will *not* truncate a field
// container if you use it to change a subset at the start:
SbString n[4] = { "Dixon", "Adams", "Bould", "Winterburn" };
textnode->string.setValues(0, sizeof(n) / sizeof(n[0]), n);
// Full contents of the SoMFString is now:
//     [ "Dixon", "Adams", "Bould", "Winterburn", <undefined>,
//       "Eriksen", "Blekken", "Aas" ]
// Inspecting multi-field values. //////////////////////////
// This will read the second element (counting from zero) if the
// multivalue field and place it in "val".
SbString val = textnode->string[2];
// Gives us a pointer to the array which the multiple-value field
// is using to store the values. Note that the return value is
// "const", so you can only read from the array, not write to
// it.
const SbString * vals = textnode->string.getValues(0);
// Modifying multi-field values. ///////////////////////////
// You can of course modify multifield-values by using the set-
// and get-methods shown above, but when you're working with
// big sets of data, this will be ineffective. Then use this
// technique instead:
SbString * modvals = textnode->string.startEditing();
// ... lots of modifications to the "modvals" array here ...
// Calling the finishEditing() method is necessary for the
// scene graph to be updated (and re-rendered).
textnode->string.finishEditing();

The reason it is more effective to wrap many modifications within startEditing() / finishEditing() is because we avoid the stream of notification messages which would otherwise be sent for each and every modification done. Instead there will just be a single notification about the changes, triggered by the finishEditing() call.

The correct manner in which to pre-allocate a specific number of field values in one chunk is to use the SoMField::setNum() method, for instance in advance of using the startEditing() and finishEditing() methods. The field values will be uninitialized after expanding the field with the setNum() call.

Be aware that your application code must be careful to not do silly things during a setValues()-triggered notification. If you have code that looks for instance like this:

// update set of coordinate indices at the start of e.g.
// an SoIndexedFaceSet's coordIndex field..
ifs->coordIndex.setValues(0, runner->numIndices, runner->indices);
// ..then truncate to make sure it's the correct size.
ifs->coordIndex.setNum(runner->numIndices);

As setValues() might leave some elements at the end of the array that typically can be invalid indices after the first statement is executed, something can go wrong during notification if you have application code monitoring changes, and the application code then for instance triggers an action or something that tries to use the coordIndex field before it's updated to it's correct size with the setNum() call.

(Notification can in this case, as always, be temporarily disabled to be on the safe side:

somefield.enableNotify(FALSE);
somefield.setValues(...);
somefield.setNum(...);
somefield.enableNotify(TRUE);
somefield.touch();

This will guarantee that the setValues() and setNum() pair will be executed as an atomic operation.)

When nodes, engines or other types of field containers are written to file, their multiple-value fields are written to file in this format:

containerclass {
  fieldname [ value0, value1, value2, ...]
  ...
}

..like this, for instance, a Coordinate3 node providing 6 vertex coordinates in the form of SbVec3f values in its "point" field for e.g. a faceset, lineset or pointset:

Coordinate3 {
   point [
      -1 1 0, -1 -1 0, 1 -1 0,
      0 2 -1, -2 0 -1, 0 -2 -1,
   ]
}

Some fields support application data sharing through a setValuesPointer() method. setValuesPointer() makes it possible to set the data pointer directly in the field. Normally (when using setValues()), Coin makes a copy of your data, so this method can be very useful if your application needs the data internally and you're just using Coin for the visualization. Example code:

myapp->calculateCoordinates(SOME_LARGE_VALUE);
SbVec3f * mycoords = myapp->getCoordinates();
SoCoordinate3 * mynode = myapp->getCoordinateNode();
mynode->point.setValuesPointer(SOME_LARGE_VALUE, mycoords);

Be aware that your field should be a read-only field when you set the data like this. If you write to the field, the values in your application array will be overwritten. If you append values to the field, a new array will be allocated, and the data will be copied into it before appending the new values. The array pointer will then be discarded.

Also note that whenever you change some value(s) in the array, you must manually notify Coin about this by calling SoField::touch(). For our example:

SbVec3f * mycoords = myapp->getCoordinate();
myapp->updateCoordinate(mycoords);
SoCoordinate3 * mynode = myapp->getCoordinateNode();
mynode->point.touch(); // this will notify Coin that field has changed

You can use SoMField::enableDeleteValues() to make Coin delete the array for you when the field is destructed or the array pointer is discarded because it isn't needed anymore (e.g. when the array size is changed). The array will be deleted using the C++ delete[] operator, so if you use it, your array must be allocated using the C++ new[] operator.

SoMField::enableDeleteValues() is supported only to be compatible with later versions of TGS Inventor and we don't recommend using it. It can have undefined results on the Microsoft Windows platform. Allocating memory in the application and destructing it in a DLL can be a bad thing, causing mysterious crashes, if you're not very careful about how your application and DLLs are linked to the underlying C library.

See also: SoSField

Constructor & Destructor Documentation

SoMField::~SoMField ( )

virtual

Destructor in SoMField does nothing. Resource deallocation needs to be done from subclasses.

SoMField::SoMField ( void )

protected

Constructor. Initializes number of values in field to zero.

Member Function Documentation

int SoMField::getNum ( void ) const

inline

Returns number of values in this field.

void SoMField::setNum ( const int numarg )

Set number of values to num.

If the current number of values is larger than num, the array of values will be truncated from the end. But if num is larger, the array will automatically be expanded (and random values will be set for the new array items).

void SoMField::deleteValues	(	int	start,
		int	numarg = `-1`
	)

virtual

Remove value elements from index start up to and including index start + num - 1.

Elements with indices larger than the last deleted element will be moved downwards in the value array.

If num equals -1, delete from index start and to the end of the array.

Reimplemented in SoMFNode, SoMFPath, and SoMFEngine.

void SoMField::insertSpace	(	int	start,
		int	numarg
	)

virtual

Insert num "slots" for new value elements from start. The elements already present from start will be moved "upward" in the extended array.

Reimplemented in SoMFNode, SoMFPath, and SoMFEngine.

SbBool SoMField::set1	(	const int	index,
		const char *const	valuestring
	)

Set the value at index to the value contained in valuestring. Returns TRUE if a valid value for this field can be extracted from valuestring, otherwise FALSE.

If index is larger than the current number of elements in the field, this method will automatically expand the field to accomodate the new value.

void SoMField::get1	(	const int	index,
		SbString &	valuestring
	)

Return the value at index in the valuestring string.

void SoMField::enableDeleteValues ( void )

virtual

Can be used to make Coin delete the array pointer set through a setValuesPointer() call. See SoMField documentation for information about the setValuesPointer() function.

This method is a TGS extension (introduced in TGS OIV v3.0) and is supported only for compatibility. We suggest that you don't use it since it can lead to hard-to-find bugs.

Since: Coin 2.0; TGS Inventor 3.0

SbBool SoMField::isDeleteValuesEnabled ( void ) const

virtual

Returns whether SoMField::enableDeleteValues() has been called on a field. The result is only valid if setValuesPointer() has been called on the field first.

This method is a TGS extension (introduced in TGS OIV v3.0) and is supported only for compatibility. We suggest that you don't use it since it can lead to hard-to-find bugs.

Since: Coin 2.0; TGS Inventor 3.0

void SoMField::makeRoom ( int newnum )

protectedvirtual

Make room in the field to store newnum values.

SoNotRec SoMField::createNotRec ( SoBase * cont )

protectedvirtual

Reimplemented from SoField.

Member Data Documentation

int SoMField::num

protected

Number of available values.

int SoMField::maxNum

protected

Number of array "slots" allocated for this field.

SbBool SoMField::userDataIsUsed

protected

Is TRUE if data has been set through a setValuesPointer() call and set to FALSE through a enableDeleteValues() call.

The documentation for this class was generated from the following files:

SoMField.h
SoMField.cpp

Public Member Functions

Static Public Member Functions

Protected Member Functions

Protected Attributes

Additional Inherited Members

Detailed Description

Constructor & Destructor Documentation

Member Function Documentation

Member Data Documentation