Bullet Collision Detection & Physics Library
btTriangleInfoMap.h
Go to the documentation of this file.
1/*
2Bullet Continuous Collision Detection and Physics Library
3Copyright (c) 2010 Erwin Coumans http://bulletphysics.org
4
5This software is provided 'as-is', without any express or implied warranty.
6In no event will the authors be held liable for any damages arising from the use of this software.
7Permission is granted to anyone to use this software for any purpose,
8including commercial applications, and to alter it and redistribute it freely,
9subject to the following restrictions:
10
111. The origin of this software must not be misrepresented; you must not claim that you wrote the original software. If you use this software in a product, an acknowledgment in the product documentation would be appreciated but is not required.
122. Altered source versions must be plainly marked as such, and must not be misrepresented as being the original software.
133. This notice may not be removed or altered from any source distribution.
14*/
15
16#ifndef _BT_TRIANGLE_INFO_MAP_H
17#define _BT_TRIANGLE_INFO_MAP_H
18
21
23#define TRI_INFO_V0V1_CONVEX 1
24#define TRI_INFO_V1V2_CONVEX 2
25#define TRI_INFO_V2V0_CONVEX 4
26
27#define TRI_INFO_V0V1_SWAP_NORMALB 8
28#define TRI_INFO_V1V2_SWAP_NORMALB 16
29#define TRI_INFO_V2V0_SWAP_NORMALB 32
30
34{
36 {
40 m_flags = 0;
41 }
42
44
48};
49
51
54{
59 btScalar m_maxEdgeAngleThreshold; //ignore edges that connect triangles at an angle larger than this m_maxEdgeAngleThreshold
61
63 {
64 m_convexEpsilon = 0.00f;
65 m_planarEpsilon = 0.0001f;
66 m_equalVertexThreshold = btScalar(0.0001) * btScalar(0.0001);
68 m_zeroAreaThreshold = btScalar(0.0001) * btScalar(0.0001);
70 }
71 virtual ~btTriangleInfoMap() {}
72
73 virtual int calculateSerializeBufferSize() const;
74
76 virtual const char* serialize(void* dataBuffer, btSerializer* serializer) const;
77
78 void deSerialize(struct btTriangleInfoMapData& data);
79};
80
81// clang-format off
82
85{
90};
91
93{
98
104
109 char m_padding[4];
110};
111
112// clang-format on
113
115{
116 return sizeof(btTriangleInfoMapData);
117}
118
120SIMD_FORCE_INLINE const char* btTriangleInfoMap::serialize(void* dataBuffer, btSerializer* serializer) const
121{
122 btTriangleInfoMapData* tmapData = (btTriangleInfoMapData*)dataBuffer;
123 tmapData->m_convexEpsilon = (float)m_convexEpsilon;
124 tmapData->m_planarEpsilon = (float)m_planarEpsilon;
127 tmapData->m_zeroAreaThreshold = (float)m_zeroAreaThreshold;
128
129 tmapData->m_hashTableSize = m_hashTable.size();
130
131 tmapData->m_hashTablePtr = tmapData->m_hashTableSize ? (int*)serializer->getUniquePointer((void*)&m_hashTable[0]) : 0;
132 if (tmapData->m_hashTablePtr)
133 {
134 //serialize an int buffer
135 int sz = sizeof(int);
136 int numElem = tmapData->m_hashTableSize;
137 btChunk* chunk = serializer->allocate(sz, numElem);
138 int* memPtr = (int*)chunk->m_oldPtr;
139 for (int i = 0; i < numElem; i++, memPtr++)
140 {
141 *memPtr = m_hashTable[i];
142 }
143 serializer->finalizeChunk(chunk, "int", BT_ARRAY_CODE, (void*)&m_hashTable[0]);
144 }
145
146 tmapData->m_nextSize = m_next.size();
147 tmapData->m_nextPtr = tmapData->m_nextSize ? (int*)serializer->getUniquePointer((void*)&m_next[0]) : 0;
148 if (tmapData->m_nextPtr)
149 {
150 int sz = sizeof(int);
151 int numElem = tmapData->m_nextSize;
152 btChunk* chunk = serializer->allocate(sz, numElem);
153 int* memPtr = (int*)chunk->m_oldPtr;
154 for (int i = 0; i < numElem; i++, memPtr++)
155 {
156 *memPtr = m_next[i];
157 }
158 serializer->finalizeChunk(chunk, "int", BT_ARRAY_CODE, (void*)&m_next[0]);
159 }
160
161 tmapData->m_numValues = m_valueArray.size();
162 tmapData->m_valueArrayPtr = tmapData->m_numValues ? (btTriangleInfoData*)serializer->getUniquePointer((void*)&m_valueArray[0]) : 0;
163 if (tmapData->m_valueArrayPtr)
164 {
165 int sz = sizeof(btTriangleInfoData);
166 int numElem = tmapData->m_numValues;
167 btChunk* chunk = serializer->allocate(sz, numElem);
169 for (int i = 0; i < numElem; i++, memPtr++)
170 {
171 memPtr->m_edgeV0V1Angle = (float)m_valueArray[i].m_edgeV0V1Angle;
172 memPtr->m_edgeV1V2Angle = (float)m_valueArray[i].m_edgeV1V2Angle;
173 memPtr->m_edgeV2V0Angle = (float)m_valueArray[i].m_edgeV2V0Angle;
174 memPtr->m_flags = m_valueArray[i].m_flags;
175 }
176 serializer->finalizeChunk(chunk, "btTriangleInfoData", BT_ARRAY_CODE, (void*)&m_valueArray[0]);
177 }
178
179 tmapData->m_numKeys = m_keyArray.size();
180 tmapData->m_keyArrayPtr = tmapData->m_numKeys ? (int*)serializer->getUniquePointer((void*)&m_keyArray[0]) : 0;
181 if (tmapData->m_keyArrayPtr)
182 {
183 int sz = sizeof(int);
184 int numElem = tmapData->m_numValues;
185 btChunk* chunk = serializer->allocate(sz, numElem);
186 int* memPtr = (int*)chunk->m_oldPtr;
187 for (int i = 0; i < numElem; i++, memPtr++)
188 {
189 *memPtr = m_keyArray[i].getUid1();
190 }
191 serializer->finalizeChunk(chunk, "int", BT_ARRAY_CODE, (void*)&m_keyArray[0]);
192 }
193
194 // Fill padding with zeros to appease msan.
195 tmapData->m_padding[0] = 0;
196 tmapData->m_padding[1] = 0;
197 tmapData->m_padding[2] = 0;
198 tmapData->m_padding[3] = 0;
199
200 return "btTriangleInfoMapData";
201}
202
205{
212 int i = 0;
213 for (i = 0; i < tmapData.m_hashTableSize; i++)
214 {
215 m_hashTable[i] = tmapData.m_hashTablePtr[i];
216 }
217 m_next.resize(tmapData.m_nextSize);
218 for (i = 0; i < tmapData.m_nextSize; i++)
219 {
220 m_next[i] = tmapData.m_nextPtr[i];
221 }
223 for (i = 0; i < tmapData.m_numValues; i++)
224 {
225 m_valueArray[i].m_edgeV0V1Angle = tmapData.m_valueArrayPtr[i].m_edgeV0V1Angle;
226 m_valueArray[i].m_edgeV1V2Angle = tmapData.m_valueArrayPtr[i].m_edgeV1V2Angle;
227 m_valueArray[i].m_edgeV2V0Angle = tmapData.m_valueArrayPtr[i].m_edgeV2V0Angle;
228 m_valueArray[i].m_flags = tmapData.m_valueArrayPtr[i].m_flags;
229 }
230
231 m_keyArray.resize(tmapData.m_numKeys, btHashInt(0));
232 for (i = 0; i < tmapData.m_numKeys; i++)
233 {
234 m_keyArray[i].setUid1(tmapData.m_keyArrayPtr[i]);
235 }
236}
237
238#endif //_BT_TRIANGLE_INFO_MAP_H
float btScalar
The btScalar type abstracts floating point numbers, to easily switch between double and single floati...
Definition: btScalar.h:314
#define SIMD_FORCE_INLINE
Definition: btScalar.h:98
#define SIMD_2_PI
Definition: btScalar.h:527
#define BT_ARRAY_CODE
Definition: btSerializer.h:118
btHashMap< btHashInt, btTriangleInfo > btInternalTriangleInfoMap
int size() const
return the number of elements in the array
void resize(int newsize, const T &fillData=T())
void * m_oldPtr
Definition: btSerializer.h:52
The btHashMap template class implements a generic and lightweight hashmap.
Definition: btHashMap.h:220
btAlignedObjectArray< int > m_hashTable
Definition: btHashMap.h:222
btAlignedObjectArray< int > m_next
Definition: btHashMap.h:223
btAlignedObjectArray< Key > m_keyArray
Definition: btHashMap.h:226
btAlignedObjectArray< Value > m_valueArray
Definition: btHashMap.h:225
virtual btChunk * allocate(size_t size, int numElements)=0
virtual void * getUniquePointer(void *oldPtr)=0
virtual void finalizeChunk(btChunk *chunk, const char *structType, int chunkCode, void *oldPtr)=0
those fields have to be float and not btScalar for the serialization to work properly
btTriangleInfoData * m_valueArrayPtr
The btTriangleInfoMap stores edge angle information for some triangles. You can compute this informat...
void deSerialize(struct btTriangleInfoMapData &data)
fills the dataBuffer and returns the struct name (and 0 on failure)
btScalar m_maxEdgeAngleThreshold
used to determine edge contacts: if the closest distance between a contact point and an edge is small...
btScalar m_edgeDistanceThreshold
used to compute connectivity: if the distance between two vertices is smaller than m_equalVertexThres...
btScalar m_zeroAreaThreshold
btTriangleInfoMap()
used to determine if a triangle is degenerate (length squared of cross product of 2 triangle edges < ...
btScalar m_planarEpsilon
used to determine if an edge or contact normal is convex, using the dot product
btScalar m_equalVertexThreshold
used to determine if a triangle edge is planar with zero angle
virtual ~btTriangleInfoMap()
virtual const char * serialize(void *dataBuffer, btSerializer *serializer) const
fills the dataBuffer and returns the struct name (and 0 on failure)
virtual int calculateSerializeBufferSize() const
The btTriangleInfo structure stores information to adjust collision normals to avoid collisions again...
btScalar m_edgeV2V0Angle
btScalar m_edgeV0V1Angle
btScalar m_edgeV1V2Angle