Aria  2.8.0
simpleMotionCommands.cpp

example showing how to connect and send basic motion commands to the robotARIA provides two levels of robot motion control, direct motion commands, and actions. This example shows direct motion commands. See actionExample.cpp, actionGroupExample.cpp, and others for examples on how to use actions. Actions provide a more modular way of performing more complex motion behaviors than the simple imperitive style used here.

See the ArRobot class documentation, as well as the overview of robot motion, for more information.

WARNING: this program does no sensing or avoiding of obstacles, the robot WILL collide with any objects in the way! Make sure the robot has about 2-3 meters of free space around it before starting the program.

This program will work either with the MobileSim simulator or on a real robot's onboard computer. (Or use -remoteHost to connect to a wireless ethernet-serial bridge.)

/*
Adept MobileRobots Robotics Interface for Applications (ARIA)
Copyright (C) 2004, 2005 ActivMedia Robotics LLC
Copyright (C) 2006, 2007, 2008, 2009, 2010 MobileRobots Inc.
Copyright (C) 2011, 2012, 2013 Adept Technology
This program is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation; either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program; if not, write to the Free Software
Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
If you wish to redistribute ARIA under different terms, contact
Adept MobileRobots for information about a commercial version of ARIA at
robots@mobilerobots.com or
Adept MobileRobots, 10 Columbia Drive, Amherst, NH 03031; +1-603-881-7960
*/
#include "Aria.h"
int main(int argc, char **argv)
{
ArRobot robot;
ArArgumentParser parser(&argc, argv);
ArLog::log(ArLog::Terse, "WARNING: this program does no sensing or avoiding of obstacles, the robot WILL collide with any objects in the way! Make sure the robot has approximately 3 meters of free space on all sides.");
// ArRobotConnector connects to the robot, get some initial data from it such as type and name,
// and then loads parameter files for this robot.
ArRobotConnector robotConnector(&parser, &robot);
if(!robotConnector.connectRobot())
{
ArLog::log(ArLog::Terse, "simpleMotionCommands: Could not connect to the robot.");
{
return 1;
}
}
{
return 1;
}
ArLog::log(ArLog::Normal, "simpleMotionCommands: Connected.");
// Start the robot processing cycle running in the background.
// True parameter means that if the connection is lost, then the
// run loop ends.
robot.runAsync(true);
// Print out some data from the SIP.
// We must "lock" the ArRobot object
// before calling its methods, and "unlock" when done, to prevent conflicts
// with the background thread started by the call to robot.runAsync() above.
// See the section on threading in the manual for more about this.
// Make sure you unlock before any sleep() call or any other code that will
// take some time; if the robot remains locked during that time, then
// ArRobot's background thread will be blocked and unable to communicate with
// the robot, call tasks, etc.
robot.lock();
ArLog::log(ArLog::Normal, "simpleMotionCommands: Pose=(%.2f,%.2f,%.2f), Trans. Vel=%.2f, Rot. Vel=%.2f, Battery=%.2fV",
robot.getX(), robot.getY(), robot.getTh(), robot.getVel(), robot.getRotVel(), robot.getBatteryVoltage());
robot.unlock();
// Sleep for 3 seconds.
ArLog::log(ArLog::Normal, "simpleMotionCommands: Will start driving in 3 seconds...");
// Set forward velocity to 50 mm/s
ArLog::log(ArLog::Normal, "simpleMotionCommands: Driving forward at 250 mm/s for 5 sec...");
robot.lock();
robot.enableMotors();
robot.setVel(250);
robot.unlock();
ArLog::log(ArLog::Normal, "simpleMotionCommands: Stopping.");
robot.lock();
robot.stop();
robot.unlock();
ArLog::log(ArLog::Normal, "simpleMotionCommands: Rotating at 10 deg/s for 5 sec...");
robot.lock();
robot.setRotVel(10);
robot.unlock();
ArLog::log(ArLog::Normal, "simpleMotionCommands: Rotating at -10 deg/s for 10 sec...");
robot.lock();
robot.setRotVel(-10);
robot.unlock();
ArUtil::sleep(10000);
ArLog::log(ArLog::Normal, "simpleMotionCommands: Driving forward at 150 mm/s for 5 sec...");
robot.lock();
robot.setRotVel(0);
robot.setVel(150);
robot.unlock();
ArLog::log(ArLog::Normal, "simpleMotionCommands: Stopping.");
robot.lock();
robot.stop();
robot.unlock();
// Other motion command functions include move(), setHeading(),
// setDeltaHeading(). You can also adjust acceleration and deceleration
// values used by the robot with setAccel(), setDecel(), setRotAccel(),
// setRotDecel(). See the ArRobot class documentation for more.
robot.lock();
ArLog::log(ArLog::Normal, "simpleMotionCommands: Pose=(%.2f,%.2f,%.2f), Trans. Vel=%.2f, Rot. Vel=%.2f, Battery=%.2fV",
robot.getX(), robot.getY(), robot.getTh(), robot.getVel(), robot.getRotVel(), robot.getBatteryVoltage());
robot.unlock();
ArLog::log(ArLog::Normal, "simpleMotionCommands: Ending robot thread...");
robot.stopRunning();
// wait for the thread to stop
robot.waitForRunExit();
// exit
ArLog::log(ArLog::Normal, "simpleMotionCommands: Exiting.");
return 0;
}