mtxIO.cpp

Sets patterns on digital outputs and acts on digital inputs. Attach LEDs to the outputs and buttons to the digital inputs to use. (See the Pioneer LX manual and robots.mobilerobots.com for more details.) The 'mtx' Linux kernel module must be loaded, and the /dev/mtx character device must have been created (see mtxIODriver documentation). You must have read/write access to /dev/mtx.

/*
Adept MobileRobots Robotics Interface for Applications (ARIA)
Copyright (C) 2004, 2005 ActivMedia Robotics LLC
Copyright (C) 2006, 2007, 2008, 2009, 2010 MobileRobots Inc.
Copyright (C) 2011, 2012, 2013 Adept Technology

     This program is free software; you can redistribute it and/or modify
     it under the terms of the GNU General Public License as published by
     the Free Software Foundation; either version 2 of the License, or
     (at your option) any later version.

     This program is distributed in the hope that it will be useful,
     but WITHOUT ANY WARRANTY; without even the implied warranty of
     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
     GNU General Public License for more details.

     You should have received a copy of the GNU General Public License
     along with this program; if not, write to the Free Software
     Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA

If you wish to redistribute ARIA under different terms, contact 
Adept MobileRobots for information about a commercial version of ARIA at 
robots@mobilerobots.com or 
Adept MobileRobots, 10 Columbia Drive, Amherst, NH 03031; +1-603-881-7960
*/
#include "Aria.h"
#include "ArMTXIO.h"

void printBits(unsigned short c) {
  int i;
  for (i=0; i < 16; i++) {
    if (i == 8) {
      ArLog::log(ArLog::Normal, " ");
    }
    if (0x8000 & (c << i)) {
      ArLog::log(ArLog::Normal, "1");
    }
    else {
      ArLog::log(ArLog::Normal, "0");
    }
  }
  ArLog::log(ArLog::Normal, " (0x%04x) ", c);
}

int main(int argc, char **argv)
{
  Aria::init();
  ArArgumentParser parser(&argc, argv);
  parser.loadDefaultArguments();
  ArRobot robot;

  ArRobotConnector robotConnector(&parser, &robot);
  if(!robotConnector.connectRobot())
  {
    ArLog::log(ArLog::Terse, "mtxIO: Could not connect to the robot.");
    if(parser.checkHelpAndWarnUnparsed())
    {
        // -help not given
        Aria::logOptions();
        Aria::exit(1);
    }
  }

  if (!Aria::parseArgs() || !parser.checkHelpAndWarnUnparsed())
  {
    Aria::logOptions();
    Aria::exit(1);
  }
  ArLog::log(ArLog::Normal, "mtxIO: Connected.");
  robot.comInt(ArCommands::JOYINFO, 0);

  ArMTXIO mtxIO;

  if(!mtxIO.isEnabled())
  {
    ArLog::log(ArLog::Terse, "mtxIO: Error opening MTX IO device interface!");
    Aria::exit(4);
  }

  robot.runAsync(true);

  unsigned char out = 1;
  while(true)
  {
    mtxIO.lock();

    // print state of inputs
    unsigned char inp;
    mtxIO.getDigitalInputMon1(&inp);
    printBits(inp);
    mtxIO.getDigitalInputMon2(&inp);
    printBits(inp);

    

/* shouldn't be neccesary
    unsigned char cur;

    // get current state
    if(!mtxIO.getDigitalOutputControl1(&cur))
    {
      ArLog::log(ArLog::Terse, "mtxIO: Error getting current state of output control 1");
      mtxIO.unlock();
      Aria::exit(2);
    }
*/

    // set new state on both output banks

    if(!mtxIO.setDigitalOutputControl1(&out))
    {
      ArLog::log(ArLog::Terse, "mtxIO: Error setting state of output control 1");
      mtxIO.unlock();
      Aria::exit(3);
    }

    if(!mtxIO.setDigitalOutputControl2(&out))
    {
      ArLog::log(ArLog::Terse, "mtxIO: Error setting state of output control 2");
      mtxIO.unlock();
      Aria::exit(3);
    }
  
    // wait
    mtxIO.unlock();
    ArUtil::sleep(500);
 
    // shift 
    
    out = out << 1;
    if(out == 0) out = 1;

  }
    
    
  Aria::exit(0);
  
    // wait
    mtxIO.unlock();
    ArUtil::sleep(500);
 
    // shift 
    out = out << 1;
    if(out == 0) out = 1;
  }
    
    
  Aria::exit(0);

}