API Configuration options¶

Configuration¶

The Identity service is configured in the /etc/keystone/keystone.conf file.

The following tables provide a comprehensive list of the Identity service options.

For a sample configuration file, refer to keystone.conf.

admin_token¶

Type:

string

Default:

<None>

Using this feature is NOT recommended. Instead, use the keystone-manage bootstrap command. The value of this option is treated as a “shared secret” that can be used to bootstrap Keystone through the API. This “token” does not represent a user (it has no identity), and carries no explicit authorization (it effectively bypasses most authorization checks). If set to None, the value is ignored and the admin_token middleware is effectively disabled.

public_endpoint¶

Type:

URI

Default:

<None>

The base public endpoint URL for Keystone that is advertised to clients (NOTE: this does NOT affect how Keystone listens for connections). Defaults to the base host URL of the request. For example, if keystone receives a request to http://server:5000/v3/users, then this will option will be automatically treated as http://server:5000. You should only need to set option if either the value of the base URL contains a path that keystone does not automatically infer (/prefix/v3), or if the endpoint should be found on a different host.

max_project_tree_depth¶

Type:

integer

Default:

5

Maximum depth of the project hierarchy, excluding the project acting as a domain at the top of the hierarchy. WARNING: Setting it to a large value may adversely impact performance.

max_param_size¶

Type:

integer

Default:

64

Limit the sizes of user & project ID/names.

max_token_size¶

Type:

integer

Default:

255

Similar to [DEFAULT] max_param_size, but provides an exception for token values. With Fernet tokens, this can be set as low as 255.

list_limit¶

Type:

integer

Default:

<None>

The maximum number of entities that will be returned in a collection. This global limit may be then overridden for a specific driver, by specifying a list_limit in the appropriate section (for example, [assignment]). No limit is set by default. In larger deployments, it is recommended that you set this to a reasonable number to prevent operations like listing all users and projects from placing an unnecessary load on the system.

strict_password_check¶

Type:

boolean

Default:

False

If set to true, strict password length checking is performed for password manipulation. If a password exceeds the maximum length, the operation will fail with an HTTP 403 Forbidden error. If set to false, passwords are automatically truncated to the maximum length.

insecure_debug¶

Type:

boolean

Default:

False

If set to true, then the server will return information in HTTP responses that may allow an unauthenticated or authenticated user to get more information than normal, such as additional details about why authentication failed. This may be useful for debugging but is insecure.

default_publisher_id¶

Type:

string

Default:

<None>

Default publisher_id for outgoing notifications. If left undefined, Keystone will default to using the server’s host name.

notification_format¶

Type:

string

Default:

cadf

Valid Values:

basic, cadf

Define the notification format for identity service events. A basic notification only has information about the resource being operated on. A cadf notification has the same information, as well as information about the initiator of the event. The cadf option is entirely backwards compatible with the basic option, but is fully CADF-compliant, and is recommended for auditing use cases.

notification_opt_out¶

Type:

multi-valued

Default:

identity.authenticate.success

Default:

identity.authenticate.pending

Default:

identity.authenticate.failed

You can reduce the number of notifications keystone emits by explicitly opting out. Keystone will not emit notifications that match the patterns expressed in this list. Values are expected to be in the form of identity.<resource_type>.<operation>. By default, all notifications related to authentication are automatically suppressed. This field can be set multiple times in order to opt-out of multiple notification topics. For example, the following suppresses notifications describing user creation or successful authentication events: notification_opt_out=identity.user.create notification_opt_out=identity.authenticate.success

rpc_conn_pool_size¶

Type:

integer

Default:

30

Minimum Value:

1

Size of RPC connection pool.

Deprecated Variations¶

Group	Name
DEFAULT	rpc_conn_pool_size

conn_pool_min_size¶

Type:

integer

Default:

2

The pool size limit for connections expiration policy

conn_pool_ttl¶

Type:

integer

Default:

1200

The time-to-live in sec of idle connections in the pool

executor_thread_pool_size¶

Type:

integer

Default:

64

Size of executor thread pool when executor is threading or eventlet.

Deprecated Variations¶

Group	Name
DEFAULT	rpc_thread_pool_size

rpc_response_timeout¶

Type:

integer

Default:

60

Seconds to wait for a response from a call.

transport_url¶

Type:

string

Default:

rabbit://

The network address and optional user credentials for connecting to the messaging backend, in URL format. The expected format is:

driver://[user:pass@]host:port[,[userN:passN@]hostN:portN]/virtual_host?query

Example: rabbit://rabbitmq:password@127.0.0.1:5672//

For full details on the fields in the URL see the documentation of oslo_messaging.TransportURL at https://docs.openstack.org/oslo.messaging/latest/reference/transport.html

control_exchange¶

Type:

string

Default:

keystone

The default exchange under which topics are scoped. May be overridden by an exchange name specified in the transport_url option.

rpc_ping_enabled¶

Type:

boolean

Default:

False

Add an endpoint to answer to ping calls. Endpoint is named oslo_rpc_server_ping

debug¶

Type:

boolean

Default:

False

Mutable:

This option can be changed without restarting.

If set to true, the logging level will be set to DEBUG instead of the default INFO level.

log_config_append¶

Type:

string

Default:

<None>

Mutable:

This option can be changed without restarting.

The name of a logging configuration file. This file is appended to any existing logging configuration files. For details about logging configuration files, see the Python logging module documentation. Note that when logging configuration files are used then all logging configuration is set in the configuration file and other logging configuration options are ignored (for example, log-date-format).

Deprecated Variations¶

Group	Name
DEFAULT	log-config
DEFAULT	log_config

log_date_format¶

Type:

string

Default:

%Y-%m-%d %H:%M:%S

Defines the format string for %(asctime)s in log records. Default: the value above . This option is ignored if log_config_append is set.

log_file¶

Type:

string

Default:

<None>

(Optional) Name of log file to send logging output to. If no default is set, logging will go to stderr as defined by use_stderr. This option is ignored if log_config_append is set.

Deprecated Variations¶

Group	Name
DEFAULT	logfile

log_dir¶

Type:

string

Default:

<None>

(Optional) The base directory used for relative log_file paths. This option is ignored if log_config_append is set.

Deprecated Variations¶

Group	Name
DEFAULT	logdir

watch_log_file¶

Type:

boolean

Default:

False

Uses logging handler designed to watch file system. When log file is moved or removed this handler will open a new log file with specified path instantaneously. It makes sense only if log_file option is specified and Linux platform is used. This option is ignored if log_config_append is set.

use_syslog¶

Type:

boolean

Default:

False

Use syslog for logging. Existing syslog format is DEPRECATED and will be changed later to honor RFC5424. This option is ignored if log_config_append is set.

use_journal¶

Type:

boolean

Default:

False

Enable journald for logging. If running in a systemd environment you may wish to enable journal support. Doing so will use the journal native protocol which includes structured metadata in addition to log messages.This option is ignored if log_config_append is set.

syslog_log_facility¶

Type:

string

Default:

LOG_USER

Syslog facility to receive log lines. This option is ignored if log_config_append is set.

use_json¶

Type:

boolean

Default:

False

Use JSON formatting for logging. This option is ignored if log_config_append is set.

use_stderr¶

Type:

boolean

Default:

False

Log output to standard error. This option is ignored if log_config_append is set.

use_eventlog¶

Type:

boolean

Default:

False

Log output to Windows Event Log.

log_rotate_interval¶

Type:

integer

Default:

1

The amount of time before the log files are rotated. This option is ignored unless log_rotation_type is set to “interval”.

log_rotate_interval_type¶

Type:

string

Default:

days

Valid Values:

Seconds, Minutes, Hours, Days, Weekday, Midnight

Rotation interval type. The time of the last file change (or the time when the service was started) is used when scheduling the next rotation.

max_logfile_count¶

Type:

integer

Default:

30

Maximum number of rotated log files.

max_logfile_size_mb¶

Type:

integer

Default:

200

Log file maximum size in MB. This option is ignored if “log_rotation_type” is not set to “size”.

log_rotation_type¶

Type:

string

Default:

none

Valid Values:

interval, size, none

Log rotation type.

Possible values

interval

Rotate logs at predefined time intervals.

size

Rotate logs once they reach a predefined size.

none

Do not rotate log files.

logging_context_format_string¶

Type:

string

Default:

%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [%(global_request_id)s %(request_id)s %(user_identity)s] %(instance)s%(message)s

Format string to use for log messages with context. Used by oslo_log.formatters.ContextFormatter

logging_default_format_string¶

Type:

string

Default:

%(asctime)s.%(msecs)03d %(process)d %(levelname)s %(name)s [-] %(instance)s%(message)s

Format string to use for log messages when context is undefined. Used by oslo_log.formatters.ContextFormatter

logging_debug_format_suffix¶

Type:

string

Default:

%(funcName)s %(pathname)s:%(lineno)d

Additional data to append to log message when logging level for the message is DEBUG. Used by oslo_log.formatters.ContextFormatter

logging_exception_prefix¶

Type:

string

Default:

%(asctime)s.%(msecs)03d %(process)d ERROR %(name)s %(instance)s

Prefix each line of exception output with this format. Used by oslo_log.formatters.ContextFormatter

logging_user_identity_format¶

Type:

string

Default:

%(user)s %(project)s %(domain)s %(system_scope)s %(user_domain)s %(project_domain)s

Defines the format string for %(user_identity)s that is used in logging_context_format_string. Used by oslo_log.formatters.ContextFormatter

default_log_levels¶

Type:

list

Default:

['amqp=WARN', 'amqplib=WARN', 'boto=WARN', 'qpid=WARN', 'sqlalchemy=WARN', 'suds=INFO', 'oslo.messaging=INFO', 'oslo_messaging=INFO', 'iso8601=WARN', 'requests.packages.urllib3.connectionpool=WARN', 'urllib3.connectionpool=WARN', 'websocket=WARN', 'requests.packages.urllib3.util.retry=WARN', 'urllib3.util.retry=WARN', 'keystonemiddleware=WARN', 'routes.middleware=WARN', 'stevedore=WARN', 'taskflow=WARN', 'keystoneauth=WARN', 'oslo.cache=INFO', 'oslo_policy=INFO', 'dogpile.core.dogpile=INFO']

List of package logging levels in logger=LEVEL pairs. This option is ignored if log_config_append is set.

publish_errors¶

Type:

boolean

Default:

False

Enables or disables publication of error events.

instance_format¶

Type:

string

Default:

"[instance: %(uuid)s] "

The format for an instance that is passed with the log message.

instance_uuid_format¶

Type:

string

Default:

"[instance: %(uuid)s] "

The format for an instance UUID that is passed with the log message.

rate_limit_interval¶

Type:

integer

Default:

0

Interval, number of seconds, of log rate limiting.

rate_limit_burst¶

Type:

integer

Default:

0

Maximum number of logged messages per rate_limit_interval.

rate_limit_except_level¶

Type:

string

Default:

CRITICAL

Log level name used by rate limiting: CRITICAL, ERROR, INFO, WARNING, DEBUG or empty string. Logs with level greater or equal to rate_limit_except_level are not filtered. An empty string means that all levels are filtered.

fatal_deprecations¶

Type:

boolean

Default:

False

Enables or disables fatal status of deprecations.

driver¶

Type:

string

Default:

sql

Entry point for the application credential backend driver in the keystone.application_credential namespace. Keystone only provides a sql driver, so there is no reason to change this unless you are providing a custom entry point.

caching¶

Type:

boolean

Default:

True

Toggle for application credential caching. This has no effect unless global caching is enabled.

cache_time¶

Type:

integer

Default:

<None>

Time to cache application credential data in seconds. This has no effect unless global caching is enabled.

user_limit¶

Type:

integer

Default:

-1

Maximum number of application credentials a user is permitted to create. A value of -1 means unlimited. If a limit is not set, users are permitted to create application credentials at will, which could lead to bloat in the keystone database or open keystone to a DoS attack.

driver¶

Type:

string

Default:

sql

Entry point for the assignment backend driver (where role assignments are stored) in the keystone.assignment namespace. Only a SQL driver is supplied by keystone itself. Unless you are writing proprietary drivers for keystone, you do not need to set this option.

prohibited_implied_role¶

Type:

list

Default:

['admin']

A list of role names which are prohibited from being an implied role.

methods¶

Type:

list

Default:

['external', 'password', 'token', 'oauth1', 'mapped', 'application_credential']

Allowed authentication methods. Note: You should disable the external auth method if you are currently using federation. External auth and federation both use the REMOTE_USER variable. Since both the mapped and external plugin are being invoked to validate attributes in the request environment, it can cause conflicts.

password¶

Type:

string

Default:

<None>

Entry point for the password auth plugin module in the keystone.auth.password namespace. You do not need to set this unless you are overriding keystone’s own password authentication plugin.

token¶

Type:

string

Default:

<None>

Entry point for the token auth plugin module in the keystone.auth.token namespace. You do not need to set this unless you are overriding keystone’s own token authentication plugin.

external¶

Type:

string

Default:

<None>

Entry point for the external (REMOTE_USER) auth plugin module in the keystone.auth.external namespace. Supplied drivers are DefaultDomain and Domain. The default driver is DefaultDomain, which assumes that all users identified by the username specified to keystone in the REMOTE_USER variable exist within the context of the default domain. The Domain option expects an additional environment variable be presented to keystone, REMOTE_DOMAIN, containing the domain name of the REMOTE_USER (if REMOTE_DOMAIN is not set, then the default domain will be used instead). You do not need to set this unless you are taking advantage of “external authentication”, where the application server (such as Apache) is handling authentication instead of keystone.

oauth1¶

Type:

string

Default:

<None>

Entry point for the OAuth 1.0a auth plugin module in the keystone.auth.oauth1 namespace. You do not need to set this unless you are overriding keystone’s own oauth1 authentication plugin.

mapped¶

Type:

string

Default:

<None>

Entry point for the mapped auth plugin module in the keystone.auth.mapped namespace. You do not need to set this unless you are overriding keystone’s own mapped authentication plugin.

application_credential¶

Type:

string

Default:

<None>

Entry point for the application_credential auth plugin module in the keystone.auth.application_credential namespace. You do not need to set this unless you are overriding keystone’s own application_credential authentication plugin.

config_prefix¶

Type:

string

Default:

cache.oslo

Prefix for building the configuration dictionary for the cache region. This should not need to be changed unless there is another dogpile.cache region with the same configuration name.

expiration_time¶

Type:

integer

Default:

600

Default TTL, in seconds, for any cached item in the dogpile.cache region. This applies to any cached method that doesn’t have an explicit cache expiration time defined for it.

backend¶

Type:

string

Default:

dogpile.cache.null

Valid Values:

oslo_cache.memcache_pool, oslo_cache.dict, oslo_cache.mongo, oslo_cache.etcd3gw, dogpile.cache.pymemcache, dogpile.cache.memcached, dogpile.cache.pylibmc, dogpile.cache.bmemcached, dogpile.cache.dbm, dogpile.cache.redis, dogpile.cache.memory, dogpile.cache.memory_pickle, dogpile.cache.null

Cache backend module. For eventlet-based or environments with hundreds of threaded servers, Memcache with pooling (oslo_cache.memcache_pool) is recommended. For environments with less than 100 threaded servers, Memcached (dogpile.cache.memcached) or Redis (dogpile.cache.redis) is recommended. Test environments with a single instance of the server can use the dogpile.cache.memory backend.

backend_argument¶

Type:

multi-valued

Default:

''

Arguments supplied to the backend module. Specify this option once per argument to be passed to the dogpile.cache backend. Example format: “<argname>:<value>”.

proxies¶

Type:

list

Default:

[]

Proxy classes to import that will affect the way the dogpile.cache backend functions. See the dogpile.cache documentation on changing-backend-behavior.

enabled¶

Type:

boolean

Default:

True

Global toggle for caching.

debug_cache_backend¶

Type:

boolean

Default:

False

Extra debugging from the cache backend (cache keys, get/set/delete/etc calls). This is only really useful if you need to see the specific cache-backend get/set/delete calls with the keys/values. Typically this should be left set to false.

memcache_servers¶

Type:

list

Default:

['localhost:11211']

Memcache servers in the format of “host:port”. This is used by backends dependent on Memcached.If dogpile.cache.memcached or oslo_cache.memcache_pool is used and a given host refer to an IPv6 or a given domain refer to IPv6 then you should prefix the given address withthe address family (inet6) (e.g inet6[::1]:11211, inet6:[fd12:3456:789a:1::1]:11211, inet6:[controller-0.internalapi]:11211). If the address family is not given then these backends will use the default inet address family which corresponds to IPv4

memcache_dead_retry¶

Type:

integer

Default:

300

Number of seconds memcached server is considered dead before it is tried again. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).

memcache_socket_timeout¶

Type:

floating point

Default:

1.0

Timeout in seconds for every call to a server. (dogpile.cache.memcache and oslo_cache.memcache_pool backends only).

memcache_pool_maxsize¶

Type:

integer

Default:

10

Max total number of open connections to every memcached server. (oslo_cache.memcache_pool backend only).

memcache_pool_unused_timeout¶

Type:

integer

Default:

60

Number of seconds a connection to memcached is held unused in the pool before it is closed. (oslo_cache.memcache_pool backend only).

memcache_pool_connection_get_timeout¶

Type:

integer

Default:

10

Number of seconds that an operation will wait to get a memcache client connection.

memcache_pool_flush_on_reconnect¶

Type:

boolean

Default:

False

Global toggle if memcache will be flushed on reconnect. (oslo_cache.memcache_pool backend only).

memcache_sasl_enabled¶

Type:

boolean

Default:

False

Enable the SASL(Simple Authentication and SecurityLayer) if the SASL_enable is true, else disable.

memcache_username¶

Type:

string

Default:

''

the user name for the memcached which SASL enabled

memcache_password¶

Type:

string

Default:

''

the password for the memcached which SASL enabled

tls_enabled¶

Type:

boolean

Default:

False

Global toggle for TLS usage when comunicating with the caching servers.

tls_cafile¶

Type:

string

Default:

<None>

Path to a file of concatenated CA certificates in PEM format necessary to establish the caching servers’ authenticity. If tls_enabled is False, this option is ignored.

tls_certfile¶

Type:

string

Default:

<None>

Path to a single file in PEM format containing the client’s certificate as well as any number of CA certificates needed to establish the certificate’s authenticity. This file is only required when client side authentication is necessary. If tls_enabled is False, this option is ignored.

tls_keyfile¶

Type:

string

Default:

<None>

Path to a single file containing the client’s private key in. Otherwise the private key will be taken from the file specified in tls_certfile. If tls_enabled is False, this option is ignored.

tls_allowed_ciphers¶

Type:

string

Default:

<None>

Set the available ciphers for sockets created with the TLS context. It should be a string in the OpenSSL cipher list format. If not specified, all OpenSSL enabled ciphers will be available.

enable_socket_keepalive¶

Type:

boolean

Default:

False

Global toggle for the socket keepalive of dogpile’s pymemcache backend

socket_keepalive_idle¶

Type:

integer

Default:

1

Minimum Value:

0

The time (in seconds) the connection needs to remain idle before TCP starts sending keepalive probes. Should be a positive integer most greater than zero.

socket_keepalive_interval¶

Type:

integer

Default:

1

Minimum Value:

0

The time (in seconds) between individual keepalive probes. Should be a positive integer greater than zero.

socket_keepalive_count¶

Type:

integer

Default:

1

Minimum Value:

0

The maximum number of keepalive probes TCP should send before dropping the connection. Should be a positive integer greater than zero.

enable_retry_client¶

Type:

boolean

Default:

False

Enable retry client mechanisms to handle failure. Those mechanisms can be used to wrap all kind of pymemcache clients. The wrapper allows you to define how many attempts to make and how long to wait between attemots.

retry_attempts¶

Type:

integer

Default:

2

Minimum Value:

1

Number of times to attempt an action before failing.

retry_delay¶

Type:

floating point

Default:

0

Number of seconds to sleep between each attempt.

hashclient_retry_attempts¶

Type:

integer

Default:

2

Minimum Value:

1

Amount of times a client should be tried before it is marked dead and removed from the pool in the HashClient’s internal mechanisms.

hashclient_retry_delay¶

Type:

floating point

Default:

1

Time in seconds that should pass between retry attempts in the HashClient’s internal mechanisms.

dead_timeout¶

Type:

floating point

Default:

60

Time in seconds before attempting to add a node back in the pool in the HashClient’s internal mechanisms.

template_file¶

Type:

string

Default:

default_catalog.templates

Absolute path to the file used for the templated catalog backend. This option is only used if the [catalog] driver is set to templated.

driver¶

Type:

string

Default:

sql

Entry point for the catalog driver in the keystone.catalog namespace. Keystone provides a sql option (which supports basic CRUD operations through SQL), a templated option (which loads the catalog from a templated catalog file on disk), and a endpoint_filter.sql option (which supports arbitrary service catalogs per project).

caching¶

Type:

boolean

Default:

True

Toggle for catalog caching. This has no effect unless global caching is enabled. In a typical deployment, there is no reason to disable this.

cache_time¶

Type:

integer

Default:

<None>

Time to cache catalog data (in seconds). This has no effect unless global and catalog caching are both enabled. Catalog data (services, endpoints, etc.) typically does not change frequently, and so a longer duration than the global default may be desirable.

list_limit¶

Type:

integer

Default:

<None>

Maximum number of entities that will be returned in a catalog collection. There is typically no reason to set this, as it would be unusual for a deployment to have enough services or endpoints to exceed a reasonable limit.

allowed_origin¶

Type:

list

Default:

<None>

Indicate whether this resource may be shared with the domain received in the requests “origin” header. Format: “<protocol>://<host>[:<port>]”, no trailing slash. Example: https://horizon.example.com

allow_credentials¶

Type:

boolean

Default:

True

Indicate that the actual request can include user credentials

expose_headers¶

Type:

list

Default:

['X-Auth-Token', 'X-Openstack-Request-Id', 'X-Subject-Token', 'Openstack-Auth-Receipt']

Indicate which headers are safe to expose to the API. Defaults to HTTP Simple Headers.

max_age¶

Type:

integer

Default:

3600

Maximum cache age of CORS preflight requests.

allow_methods¶

Type:

list

Default:

['GET', 'PUT', 'POST', 'DELETE', 'PATCH']

Indicate which methods can be used during the actual request.

allow_headers¶

Type:

list

Default:

['X-Auth-Token', 'X-Openstack-Request-Id', 'X-Subject-Token', 'X-Project-Id', 'X-Project-Name', 'X-Project-Domain-Id', 'X-Project-Domain-Name', 'X-Domain-Id', 'X-Domain-Name', 'Openstack-Auth-Receipt']

Indicate which header field names may be used during the actual request.

driver¶

Type:

string

Default:

sql

Entry point for the credential backend driver in the keystone.credential namespace. Keystone only provides a sql driver, so there’s no reason to change this unless you are providing a custom entry point.

provider¶

Type:

string

Default:

fernet

Entry point for credential encryption and decryption operations in the keystone.credential.provider namespace. Keystone only provides a fernet driver, so there’s no reason to change this unless you are providing a custom entry point to encrypt and decrypt credentials.

key_repository¶

Type:

string

Default:

/etc/keystone/credential-keys/

Directory containing Fernet keys used to encrypt and decrypt credentials stored in the credential backend. Fernet keys used to encrypt credentials have no relationship to Fernet keys used to encrypt Fernet tokens. Both sets of keys should be managed separately and require different rotation policies. Do not share this repository with the repository used to manage keys for Fernet tokens.

caching¶

Type:

boolean

Default:

True

Toggle for caching only on retrieval of user credentials. This has no effect unless global caching is enabled.

cache_time¶

Type:

integer

Default:

<None>

Time to cache credential data in seconds. This has no effect unless global caching is enabled.

auth_ttl¶

Type:

integer

Default:

15

The length of time in minutes for which a signed EC2 or S3 token request is valid from the timestamp contained in the token request.

user_limit¶

Type:

integer

Default:

-1

Maximum number of credentials a user is permitted to create. A value of -1 means unlimited. If a limit is not set, users are permitted to create credentials at will, which could lead to bloat in the keystone database or open keystone to a DoS attack.

sqlite_synchronous¶

Type:

boolean

Default:

True

If True, SQLite uses synchronous mode.

Deprecated Variations¶

Group	Name
DEFAULT	sqlite_synchronous

backend¶

Type:

string

Default:

sqlalchemy

The back end to use for the database.

Deprecated Variations¶

Group	Name
DEFAULT	db_backend

connection¶

Type:

string

Default:

<None>

The SQLAlchemy connection string to use to connect to the database.

Deprecated Variations¶

Group	Name
DEFAULT	sql_connection
DATABASE	sql_connection
sql	connection

slave_connection¶

Type:

string

Default:

<None>

The SQLAlchemy connection string to use to connect to the slave database.

mysql_sql_mode¶

Type:

string

Default:

TRADITIONAL

The SQL mode to be used for MySQL sessions. This option, including the default, overrides any server-set SQL mode. To use whatever SQL mode is set by the server configuration, set this to no value. Example: mysql_sql_mode=

mysql_enable_ndb¶

Type:

boolean

Default:

False

If True, transparently enables support for handling MySQL Cluster (NDB).

connection_recycle_time¶

Type:

integer

Default:

3600

Connections which have been present in the connection pool longer than this number of seconds will be replaced with a new one the next time they are checked out from the pool.

max_pool_size¶

Type:

integer

Default:

5

Maximum number of SQL connections to keep open in a pool. Setting a value of 0 indicates no limit.

max_retries¶

Type:

integer

Default:

10

Maximum number of database connection retries during startup. Set to -1 to specify an infinite retry count.

Deprecated Variations¶

Group	Name
DEFAULT	sql_max_retries
DATABASE	sql_max_retries

retry_interval¶

Type:

integer

Default:

10

Interval between retries of opening a SQL connection.

Deprecated Variations¶

Group	Name
DEFAULT	sql_retry_interval
DATABASE	reconnect_interval

max_overflow¶

Type:

integer

Default:

50

If set, use this value for max_overflow with SQLAlchemy.

Deprecated Variations¶

Group	Name
DEFAULT	sql_max_overflow
DATABASE	sqlalchemy_max_overflow

connection_debug¶

Type:

integer

Default:

0

Minimum Value:

0

Maximum Value:

100

Verbosity of SQL debugging information: 0=None, 100=Everything.

Deprecated Variations¶

Group	Name
DEFAULT	sql_connection_debug

connection_trace¶

Type:

boolean

Default:

False

Add Python stack traces to SQL as comment strings.

Deprecated Variations¶

Group	Name
DEFAULT	sql_connection_trace

pool_timeout¶

Type:

integer

Default:

<None>

If set, use this value for pool_timeout with SQLAlchemy.

Deprecated Variations¶

Group	Name
DATABASE	sqlalchemy_pool_timeout

use_db_reconnect¶

Type:

boolean

Default:

False

Enable the experimental use of database reconnect on connection lost.

db_retry_interval¶

Type:

integer

Default:

1

Seconds between retries of a database transaction.

db_inc_retry_interval¶

Type:

boolean

Default:

True

If True, increases the interval between retries of a database operation up to db_max_retry_interval.

db_max_retry_interval¶

Type:

integer

Default:

10

If db_inc_retry_interval is set, the maximum seconds between retries of a database operation.

db_max_retries¶

Type:

integer

Default:

20

Maximum retries in case of connection error or deadlock error before error is raised. Set to -1 to specify an infinite retry count.

connection_parameters¶

Type:

string

Default:

''

Optional URL parameters to append onto the connection URL at connect time; specify as param1=value1&param2=value2&…

driver¶

Type:

string

Default:

sql

Entry point for the domain-specific configuration driver in the keystone.resource.domain_config namespace. Only a sql option is provided by keystone, so there is no reason to set this unless you are providing a custom entry point.

caching¶

Type:

boolean

Default:

True

Toggle for caching of the domain-specific configuration backend. This has no effect unless global caching is enabled. There is normally no reason to disable this.

cache_time¶

Type:

integer

Default:

300

Time-to-live (TTL, in seconds) to cache domain-specific configuration data. This has no effect unless [domain_config] caching is enabled.

driver¶

Type:

string

Default:

sql

Entry point for the endpoint filter driver in the keystone.endpoint_filter namespace. Only a sql option is provided by keystone, so there is no reason to set this unless you are providing a custom entry point.

return_all_endpoints_if_no_filter¶

Type:

boolean

Default:

True

This controls keystone’s behavior if the configured endpoint filters do not result in any endpoints for a user + project pair (and therefore a potentially empty service catalog). If set to true, keystone will return the entire service catalog. If set to false, keystone will return an empty service catalog.

driver¶

Type:

string

Default:

sql

Entry point for the endpoint policy driver in the keystone.endpoint_policy namespace. Only a sql driver is provided by keystone, so there is no reason to set this unless you are providing a custom entry point.

public_bind_host¶

Type:

host address

Default:

0.0.0.0

The IP address of the network interface for the public service to listen on.

Deprecated Variations¶

Group	Name
DEFAULT	bind_host
DEFAULT	public_bind_host

Warning

This option is deprecated for removal since K. Its value may be silently ignored in the future.

Reason:

Support for running keystone under eventlet has been removed in the Newton release. These options remain for backwards compatibility because they are used for URL substitutions.

public_port¶

Type:

port number

Default:

5000

Minimum Value:

0

Maximum Value:

65535

The port number for the public service to listen on.

Deprecated Variations¶

Group	Name
DEFAULT	public_port

Warning

This option is deprecated for removal since K. Its value may be silently ignored in the future.

Reason:

Support for running keystone under eventlet has been removed in the Newton release. These options remain for backwards compatibility because they are used for URL substitutions.

admin_bind_host¶

Type:

host address

Default:

0.0.0.0

The IP address of the network interface for the admin service to listen on.

Deprecated Variations¶

Group	Name
DEFAULT	bind_host
DEFAULT	admin_bind_host

Warning

This option is deprecated for removal since K. Its value may be silently ignored in the future.

Reason:

Support for running keystone under eventlet has been removed in the Newton release. These options remain for backwards compatibility because they are used for URL substitutions.

admin_port¶

Type:

port number

Default:

35357

Minimum Value:

0

Maximum Value:

65535

The port number for the admin service to listen on.

Deprecated Variations¶

Group	Name
DEFAULT	admin_port

Warning

This option is deprecated for removal since K. Its value may be silently ignored in the future.

Reason:

Support for running keystone under eventlet has been removed in the Newton release. These options remain for backwards compatibility because they are used for URL substitutions.

driver¶

Type:

string

Default:

sql

Entry point for the federation backend driver in the keystone.federation namespace. Keystone only provides a sql driver, so there is no reason to set this option unless you are providing a custom entry point.

assertion_prefix¶

Type:

string

Default:

''

Prefix to use when filtering environment variable names for federated assertions. Matched variables are passed into the federated mapping engine.

remote_id_attribute¶

Type:

string

Default:

<None>

Default value for all protocols to be used to obtain the entity ID of the Identity Provider from the environment. For mod_shib, this would be Shib-Identity-Provider. For mod_auth_openidc, this could be HTTP_OIDC_ISS. For mod_auth_mellon, this could be MELLON_IDP. This can be overridden on a per-protocol basis by providing a remote_id_attribute to the federation protocol using the API.

federated_domain_name¶

Type:

string

Default:

Federated

An arbitrary domain name that is reserved to allow federated ephemeral users to have a domain concept. Note that an admin will not be able to create a domain with this name or update an existing domain to this name. You are not advised to change this value unless you really have to.

Warning

This option is deprecated for removal since T. Its value may be silently ignored in the future.

Reason:

This option has been superseded by ephemeral users existing in the domain of their identity provider.

trusted_dashboard¶

Type:

multi-valued

Default:

''

A list of trusted dashboard hosts. Before accepting a Single Sign-On request to return a token, the origin host must be a member of this list. This configuration option may be repeated for multiple values. You must set this in order to use web-based SSO flows. For example: trusted_dashboard=https://acme.example.com/auth/websso trusted_dashboard=https://beta.example.com/auth/websso

sso_callback_template¶

Type:

string

Default:

/etc/keystone/sso_callback_template.html

Absolute path to an HTML file used as a Single Sign-On callback handler. This page is expected to redirect the user from keystone back to a trusted dashboard host, by form encoding a token in a POST request. Keystone’s default value should be sufficient for most deployments.

caching¶

Type:

boolean

Default:

True

Toggle for federation caching. This has no effect unless global caching is enabled. There is typically no reason to disable this.

default_authorization_ttl¶

Type:

integer

Default:

0

Default time in minutes for the validity of group memberships carried over from a mapping. Default is 0, which means disabled.

key_repository¶

Type:

string

Default:

/etc/keystone/fernet-keys/

Directory containing Fernet receipt keys. This directory must exist before using keystone-manage fernet_setup for the first time, must be writable by the user running keystone-manage fernet_setup or keystone-manage fernet_rotate, and of course must be readable by keystone’s server process. The repository may contain keys in one of three states: a single staged key (always index 0) used for receipt validation, a single primary key (always the highest index) used for receipt creation and validation, and any number of secondary keys (all other index values) used for receipt validation. With multiple keystone nodes, each node must share the same key repository contents, with the exception of the staged key (index 0). It is safe to run keystone-manage fernet_rotate once on any one node to promote a staged key (index 0) to be the new primary (incremented from the previous highest index), and produce a new staged key (a new key with index 0); the resulting repository can then be atomically replicated to other nodes without any risk of race conditions (for example, it is safe to run keystone-manage fernet_rotate on host A, wait any amount of time, create a tarball of the directory on host A, unpack it on host B to a temporary location, and atomically move (mv) the directory into place on host B). Running keystone-manage fernet_rotate twice on a key repository without syncing other nodes will result in receipts that can not be validated by all nodes.

max_active_keys¶

Type:

integer

Default:

3

Minimum Value:

1

This controls how many keys are held in rotation by keystone-manage fernet_rotate before they are discarded. The default value of 3 means that keystone will maintain one staged key (always index 0), one primary key (the highest numerical index), and one secondary key (every other index). Increasing this value means that additional secondary keys will be kept in the rotation.

key_repository¶

Type:

string

Default:

/etc/keystone/fernet-keys/

Directory containing Fernet token keys. This directory must exist before using keystone-manage fernet_setup for the first time, must be writable by the user running keystone-manage fernet_setup or keystone-manage fernet_rotate, and of course must be readable by keystone’s server process. The repository may contain keys in one of three states: a single staged key (always index 0) used for token validation, a single primary key (always the highest index) used for token creation and validation, and any number of secondary keys (all other index values) used for token validation. With multiple keystone nodes, each node must share the same key repository contents, with the exception of the staged key (index 0). It is safe to run keystone-manage fernet_rotate once on any one node to promote a staged key (index 0) to be the new primary (incremented from the previous highest index), and produce a new staged key (a new key with index 0); the resulting repository can then be atomically replicated to other nodes without any risk of race conditions (for example, it is safe to run keystone-manage fernet_rotate on host A, wait any amount of time, create a tarball of the directory on host A, unpack it on host B to a temporary location, and atomically move (mv) the directory into place on host B). Running keystone-manage fernet_rotate twice on a key repository without syncing other nodes will result in tokens that can not be validated by all nodes.

max_active_keys¶

Type:

integer

Default:

3

Minimum Value:

1

This controls how many keys are held in rotation by keystone-manage fernet_rotate before they are discarded. The default value of 3 means that keystone will maintain one staged key (always index 0), one primary key (the highest numerical index), and one secondary key (every other index). Increasing this value means that additional secondary keys will be kept in the rotation.

path¶

Type:

string

Default:

/healthcheck

The path to respond to healtcheck requests on.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

detailed¶

Type:

boolean

Default:

False

Show more detailed information as part of the response. Security note: Enabling this option may expose sensitive details about the service being monitored. Be sure to verify that it will not violate your security policies.

backends¶

Type:

list

Default:

[]

Additional backends that can perform health checks and report that information back as part of a request.

disable_by_file_path¶

Type:

string

Default:

<None>

Check the presence of a file to determine if an application is running on a port. Used by DisableByFileHealthcheck plugin.

disable_by_file_paths¶

Type:

list

Default:

[]

Check the presence of a file based on a port to determine if an application is running on a port. Expects a “port:path” list of strings. Used by DisableByFilesPortsHealthcheck plugin.

default_domain_id¶

Type:

string

Default:

default

This references the domain to use for all Identity API v2 requests (which are not aware of domains). A domain with this ID can optionally be created for you by keystone-manage bootstrap. The domain referenced by this ID cannot be deleted on the v3 API, to prevent accidentally breaking the v2 API. There is nothing special about this domain, other than the fact that it must exist to order to maintain support for your v2 clients. There is typically no reason to change this value.

domain_specific_drivers_enabled¶

Type:

boolean

Default:

False

A subset (or all) of domains can have their own identity driver, each with their own partial configuration options, stored in either the resource backend or in a file in a domain configuration directory (depending on the setting of [identity] domain_configurations_from_database). Only values specific to the domain need to be specified in this manner. This feature is disabled by default, but may be enabled by default in a future release; set to true to enable.

domain_configurations_from_database¶

Type:

boolean

Default:

False

By default, domain-specific configuration data is read from files in the directory identified by [identity] domain_config_dir. Enabling this configuration option allows you to instead manage domain-specific configurations through the API, which are then persisted in the backend (typically, a SQL database), rather than using configuration files on disk.

domain_config_dir¶

Type:

string

Default:

/etc/keystone/domains

Absolute path where keystone should locate domain-specific [identity] configuration files. This option has no effect unless [identity] domain_specific_drivers_enabled is set to true. There is typically no reason to change this value.

driver¶

Type:

string

Default:

sql

Entry point for the identity backend driver in the keystone.identity namespace. Keystone provides a sql and ldap driver. This option is also used as the default driver selection (along with the other configuration variables in this section) in the event that [identity] domain_specific_drivers_enabled is enabled, but no applicable domain-specific configuration is defined for the domain in question. Unless your deployment primarily relies on ldap AND is not using domain-specific configuration, you should typically leave this set to sql.

caching¶

Type:

boolean

Default:

True

Toggle for identity caching. This has no effect unless global caching is enabled. There is typically no reason to disable this.

cache_time¶

Type:

integer

Default:

600

Time to cache identity data (in seconds). This has no effect unless global and identity caching are enabled.

max_password_length¶

Type:

integer

Default:

4096

Maximum Value:

4096

Maximum allowed length for user passwords. Decrease this value to improve performance. Changing this value does not effect existing passwords.

list_limit¶

Type:

integer

Default:

<None>

Maximum number of entities that will be returned in an identity collection.

password_hash_algorithm¶

Type:

string

Default:

bcrypt

Valid Values:

bcrypt, scrypt, pbkdf2_sha512

The password hashing algorithm to use for passwords stored within keystone.

password_hash_rounds¶

Type:

integer

Default:

<None>

This option represents a trade off between security and performance. Higher values lead to slower performance, but higher security. Changing this option will only affect newly created passwords as existing password hashes already have a fixed number of rounds applied, so it is safe to tune this option in a running cluster. The default for bcrypt is 12, must be between 4 and 31, inclusive. The default for scrypt is 16, must be within range(1,32). The default for pbkdf_sha512 is 60000, must be within range(1,1<<32) WARNING: If using scrypt, increasing this value increases BOTH time AND memory requirements to hash a password.

scrypt_block_size¶

Type:

integer

Default:

<None>

Optional block size to pass to scrypt hash function (the r parameter). Useful for tuning scrypt to optimal performance for your CPU architecture. This option is only used when the password_hash_algorithm option is set to scrypt. Defaults to 8.

scrypt_parallelism¶

Type:

integer

Default:

<None>

Optional parallelism to pass to scrypt hash function (the p parameter). This option is only used when the password_hash_algorithm option is set to scrypt. Defaults to 1.

salt_bytesize¶

Type:

integer

Default:

<None>

Minimum Value:

0

Maximum Value:

96

Number of bytes to use in scrypt and pbkfd2_sha512 hashing salt. Default for scrypt is 16 bytes. Default for pbkfd2_sha512 is 16 bytes. Limited to a maximum of 96 bytes due to the size of the column used to store password hashes.

driver¶

Type:

string

Default:

sql

Entry point for the identity mapping backend driver in the keystone.identity.id_mapping namespace. Keystone only provides a sql driver, so there is no reason to change this unless you are providing a custom entry point.

generator¶

Type:

string

Default:

sha256

Entry point for the public ID generator for user and group entities in the keystone.identity.id_generator namespace. The Keystone identity mapper only supports generators that produce 64 bytes or less. Keystone only provides a sha256 entry point, so there is no reason to change this value unless you’re providing a custom entry point.

backward_compatible_ids¶

Type:

boolean

Default:

True

The format of user and group IDs changed in Juno for backends that do not generate UUIDs (for example, LDAP), with keystone providing a hash mapping to the underlying attribute in LDAP. By default this mapping is disabled, which ensures that existing IDs will not change. Even when the mapping is enabled by using domain-specific drivers ([identity] domain_specific_drivers_enabled), any users and groups from the default domain being handled by LDAP will still not be mapped to ensure their IDs remain backward compatible. Setting this value to false will enable the new mapping for all backends, including the default LDAP driver. It is only guaranteed to be safe to enable this option if you do not already have assignments for users and groups from the default LDAP domain, and you consider it to be acceptable for Keystone to provide the different IDs to clients than it did previously (existing IDs in the API will suddenly change). Typically this means that the only time you can set this value to false is when configuring a fresh installation, although that is the recommended value.

jws_public_key_repository¶

Type:

string

Default:

/etc/keystone/jws-keys/public

Directory containing public keys for validating JWS token signatures. This directory must exist in order for keystone’s server process to start. It must also be readable by keystone’s server process. It must contain at least one public key that corresponds to a private key in keystone.conf [jwt_tokens] jws_private_key_repository. This option is only applicable in deployments issuing JWS tokens and setting keystone.conf [token] provider = jws.

jws_private_key_repository¶

Type:

string

Default:

/etc/keystone/jws-keys/private

Directory containing private keys for signing JWS tokens. This directory must exist in order for keystone’s server process to start. It must also be readable by keystone’s server process. It must contain at least one private key that corresponds to a public key in keystone.conf [jwt_tokens] jws_public_key_repository. In the event there are multiple private keys in this directory, keystone will use a key named private.pem to sign tokens. In the future, keystone may support the ability to sign tokens with multiple private keys. For now, only a key named private.pem within this directory is required to issue JWS tokens. This option is only applicable in deployments issuing JWS tokens and setting keystone.conf [token] provider = jws.

url¶

Type:

string

Default:

ldap://localhost

URL(s) for connecting to the LDAP server. Multiple LDAP URLs may be specified as a comma separated string. The first URL to successfully bind is used for the connection.

user¶

Type:

string

Default:

<None>

The user name of the administrator bind DN to use when querying the LDAP server, if your LDAP server requires it.

password¶

Type:

string

Default:

<None>

The password of the administrator bind DN to use when querying the LDAP server, if your LDAP server requires it.

suffix¶

Type:

string

Default:

cn=example,cn=com

The default LDAP server suffix to use, if a DN is not defined via either [ldap] user_tree_dn or [ldap] group_tree_dn.

query_scope¶

Type:

string

Default:

one

Valid Values:

one, sub

The search scope which defines how deep to search within the search base. A value of one (representing oneLevel or singleLevel) indicates a search of objects immediately below to the base object, but does not include the base object itself. A value of sub (representing subtree or wholeSubtree) indicates a search of both the base object itself and the entire subtree below it.

page_size¶

Type:

integer

Default:

0

Minimum Value:

0

Defines the maximum number of results per page that keystone should request from the LDAP server when listing objects. A value of zero (0) disables paging.

alias_dereferencing¶

Type:

string

Default:

default

Valid Values:

never, searching, always, finding, default

The LDAP dereferencing option to use for queries involving aliases. A value of default falls back to using default dereferencing behavior configured by your ldap.conf. A value of never prevents aliases from being dereferenced at all. A value of searching dereferences aliases only after name resolution. A value of finding dereferences aliases only during name resolution. A value of always dereferences aliases in all cases.

debug_level¶

Type:

integer

Default:

<None>

Minimum Value:

-1

Sets the LDAP debugging level for LDAP calls. A value of 0 means that debugging is not enabled. This value is a bitmask, consult your LDAP documentation for possible values.

chase_referrals¶

Type:

boolean

Default:

<None>

Sets keystone’s referral chasing behavior across directory partitions. If left unset, the system’s default behavior will be used.

user_tree_dn¶

Type:

string

Default:

<None>

The search base to use for users. Defaults to ou=Users with the [ldap] suffix appended to it.

user_filter¶

Type:

string

Default:

<None>

The LDAP search filter to use for users.

user_objectclass¶

Type:

string

Default:

inetOrgPerson

The LDAP object class to use for users.

user_id_attribute¶

Type:

string

Default:

cn

The LDAP attribute mapped to user IDs in keystone. This must NOT be a multivalued attribute. User IDs are expected to be globally unique across keystone domains and URL-safe.

user_name_attribute¶

Type:

string

Default:

sn

The LDAP attribute mapped to user names in keystone. User names are expected to be unique only within a keystone domain and are not expected to be URL-safe.

user_description_attribute¶

Type:

string

Default:

description

The LDAP attribute mapped to user descriptions in keystone.

user_mail_attribute¶

Type:

string

Default:

mail

The LDAP attribute mapped to user emails in keystone.

user_pass_attribute¶

Type:

string

Default:

userPassword

The LDAP attribute mapped to user passwords in keystone.

user_enabled_attribute¶

Type:

string

Default:

enabled

The LDAP attribute mapped to the user enabled attribute in keystone. If setting this option to userAccountControl, then you may be interested in setting [ldap] user_enabled_mask and [ldap] user_enabled_default as well.

user_enabled_invert¶

Type:

boolean

Default:

False

Logically negate the boolean value of the enabled attribute obtained from the LDAP server. Some LDAP servers use a boolean lock attribute where “true” means an account is disabled. Setting [ldap] user_enabled_invert = true will allow these lock attributes to be used. This option will have no effect if either the [ldap] user_enabled_mask or [ldap] user_enabled_emulation options are in use.

user_enabled_mask¶

Type:

integer

Default:

0

Minimum Value:

0

Bitmask integer to select which bit indicates the enabled value if the LDAP server represents “enabled” as a bit on an integer rather than as a discrete boolean. A value of 0 indicates that the mask is not used. If this is not set to 0 the typical value is 2. This is typically used when [ldap] user_enabled_attribute = userAccountControl. Setting this option causes keystone to ignore the value of [ldap] user_enabled_invert.

user_enabled_default¶

Type:

string

Default:

True

The default value to enable users. This should match an appropriate integer value if the LDAP server uses non-boolean (bitmask) values to indicate if a user is enabled or disabled. If this is not set to True, then the typical value is 512. This is typically used when [ldap] user_enabled_attribute = userAccountControl.

user_attribute_ignore¶

Type:

list

Default:

['default_project_id']

List of user attributes to ignore on create and update, or whether a specific user attribute should be filtered for list or show user.

user_default_project_id_attribute¶

Type:

string

Default:

<None>

The LDAP attribute mapped to a user’s default_project_id in keystone. This is most commonly used when keystone has write access to LDAP.

user_enabled_emulation¶

Type:

boolean

Default:

False

If enabled, keystone uses an alternative method to determine if a user is enabled or not by checking if they are a member of the group defined by the [ldap] user_enabled_emulation_dn option. Enabling this option causes keystone to ignore the value of [ldap] user_enabled_invert.

user_enabled_emulation_dn¶

Type:

string

Default:

<None>

DN of the group entry to hold enabled users when using enabled emulation. Setting this option has no effect unless [ldap] user_enabled_emulation is also enabled.

user_enabled_emulation_use_group_config¶

Type:

boolean

Default:

False

Use the [ldap] group_member_attribute and [ldap] group_objectclass settings to determine membership in the emulated enabled group. Enabling this option has no effect unless [ldap] user_enabled_emulation is also enabled.

user_additional_attribute_mapping¶

Type:

list

Default:

[]

A list of LDAP attribute to keystone user attribute pairs used for mapping additional attributes to users in keystone. The expected format is <ldap_attr>:<user_attr>, where ldap_attr is the attribute in the LDAP object and user_attr is the attribute which should appear in the identity API.

group_tree_dn¶

Type:

string

Default:

<None>

The search base to use for groups. Defaults to ou=UserGroups with the [ldap] suffix appended to it.

group_filter¶

Type:

string

Default:

<None>

The LDAP search filter to use for groups.

group_objectclass¶

Type:

string

Default:

groupOfNames

The LDAP object class to use for groups. If setting this option to posixGroup, you may also be interested in enabling the [ldap] group_members_are_ids option.

group_id_attribute¶

Type:

string

Default:

cn

The LDAP attribute mapped to group IDs in keystone. This must NOT be a multivalued attribute. Group IDs are expected to be globally unique across keystone domains and URL-safe.

group_name_attribute¶

Type:

string

Default:

ou

The LDAP attribute mapped to group names in keystone. Group names are expected to be unique only within a keystone domain and are not expected to be URL-safe.

group_member_attribute¶

Type:

string

Default:

member

The LDAP attribute used to indicate that a user is a member of the group.

group_members_are_ids¶

Type:

boolean

Default:

False

Enable this option if the members of the group object class are keystone user IDs rather than LDAP DNs. This is the case when using posixGroup as the group object class in Open Directory.

group_desc_attribute¶

Type:

string

Default:

description

The LDAP attribute mapped to group descriptions in keystone.

group_attribute_ignore¶

Type:

list

Default:

[]

List of group attributes to ignore on create and update. or whether a specific group attribute should be filtered for list or show group.

group_additional_attribute_mapping¶

Type:

list

Default:

[]

A list of LDAP attribute to keystone group attribute pairs used for mapping additional attributes to groups in keystone. The expected format is <ldap_attr>:<group_attr>, where ldap_attr is the attribute in the LDAP object and group_attr is the attribute which should appear in the identity API.

group_ad_nesting¶

Type:

boolean

Default:

False

If enabled, group queries will use Active Directory specific filters for nested groups.

tls_cacertfile¶

Type:

string

Default:

<None>

An absolute path to a CA certificate file to use when communicating with LDAP servers. This option will take precedence over [ldap] tls_cacertdir, so there is no reason to set both.

tls_cacertdir¶

Type:

string

Default:

<None>

An absolute path to a CA certificate directory to use when communicating with LDAP servers. There is no reason to set this option if you’ve also set [ldap] tls_cacertfile.

use_tls¶

Type:

boolean

Default:

False

Enable TLS when communicating with LDAP servers. You should also set the [ldap] tls_cacertfile and [ldap] tls_cacertdir options when using this option. Do not set this option if you are using LDAP over SSL (LDAPS) instead of TLS.

tls_req_cert¶

Type:

string

Default:

demand

Valid Values:

demand, never, allow

Specifies which checks to perform against client certificates on incoming TLS sessions. If set to demand, then a certificate will always be requested and required from the LDAP server. If set to allow, then a certificate will always be requested but not required from the LDAP server. If set to never, then a certificate will never be requested.

connection_timeout¶

Type:

integer

Default:

-1

Minimum Value:

-1

The connection timeout to use with the LDAP server. A value of -1 means that connections will never timeout.

use_pool¶

Type:

boolean

Default:

True

Enable LDAP connection pooling for queries to the LDAP server. There is typically no reason to disable this.

pool_size¶

Type:

integer

Default:

10

Minimum Value:

1

The size of the LDAP connection pool. This option has no effect unless [ldap] use_pool is also enabled.

pool_retry_max¶

Type:

integer

Default:

3

Minimum Value:

1

The maximum number of times to attempt connecting to the LDAP server before aborting. A value of one makes only one connection attempt. This option has no effect unless [ldap] use_pool is also enabled.

pool_retry_delay¶

Type:

floating point

Default:

0.1

The number of seconds to wait before attempting to reconnect to the LDAP server. This option has no effect unless [ldap] use_pool is also enabled.

pool_connection_timeout¶

Type:

integer

Default:

-1

Minimum Value:

-1

The connection timeout to use when pooling LDAP connections. A value of -1 means that connections will never timeout. This option has no effect unless [ldap] use_pool is also enabled.

pool_connection_lifetime¶

Type:

integer

Default:

600

Minimum Value:

1

The maximum connection lifetime to the LDAP server in seconds. When this lifetime is exceeded, the connection will be unbound and removed from the connection pool. This option has no effect unless [ldap] use_pool is also enabled.

use_auth_pool¶

Type:

boolean

Default:

True

Enable LDAP connection pooling for end user authentication. There is typically no reason to disable this.

auth_pool_size¶

Type:

integer

Default:

100

Minimum Value:

1

The size of the connection pool to use for end user authentication. This option has no effect unless [ldap] use_auth_pool is also enabled.

auth_pool_connection_lifetime¶

Type:

integer

Default:

60

Minimum Value:

1

The maximum end user authentication connection lifetime to the LDAP server in seconds. When this lifetime is exceeded, the connection will be unbound and removed from the connection pool. This option has no effect unless [ldap] use_auth_pool is also enabled.

dead_retry¶

Type:

integer

Default:

300

Number of seconds memcached server is considered dead before it is tried again. This is used by the key value store system.

Warning

This option is deprecated for removal since Y. Its value may be silently ignored in the future.

Reason:

This option has no effect. Configure keystone.conf [cache] memcache_dead_retry option to set the dead_retry of memcached instead.

socket_timeout¶

Type:

integer

Default:

3

Timeout in seconds for every call to a server. This is used by the key value store system.

Warning

This option is deprecated for removal since T. Its value may be silently ignored in the future.

Reason:

This option has no effect. Configure keystone.conf [cache] memcache_socket_timeout option to set the socket_timeout of memcached instead.

pool_maxsize¶

Type:

integer

Default:

10

Max total number of open connections to every memcached server. This is used by the key value store system.

Warning

This option is deprecated for removal since Y. Its value may be silently ignored in the future.

Reason:

This option has no effect. Configure keystone.conf [cache] memcache_pool_maxsize option to set the pool_maxsize of memcached instead.

pool_unused_timeout¶

Type:

integer

Default:

60

Number of seconds a connection to memcached is held unused in the pool before it is closed. This is used by the key value store system.

Warning

This option is deprecated for removal since Y. Its value may be silently ignored in the future.

Reason:

This option has no effect. Configure keystone.conf [cache] memcache_pool_unused_timeout option to set the pool_unused_timeout of memcached instead.

pool_connection_get_timeout¶

Type:

integer

Default:

10

Number of seconds that an operation will wait to get a memcache client connection. This is used by the key value store system.

Warning

This option is deprecated for removal since Y. Its value may be silently ignored in the future.

Reason:

This option has no effect. Configure keystone.conf [cache] memcache_pool_connection_get_timeout option to set the connection_get_timeout of memcached instead.

driver¶

Type:

string

Default:

sql

Entry point for the OAuth backend driver in the keystone.oauth1 namespace. Typically, there is no reason to set this option unless you are providing a custom entry point.

request_token_duration¶

Type:

integer

Default:

28800

Minimum Value:

0

Number of seconds for the OAuth Request Token to remain valid after being created. This is the amount of time the user has to authorize the token. Setting this option to zero means that request tokens will last forever.

access_token_duration¶

Type:

integer

Default:

86400

Minimum Value:

0

Number of seconds for the OAuth Access Token to remain valid after being created. This is the amount of time the consumer has to interact with the service provider (which is typically keystone). Setting this option to zero means that access tokens will last forever.

container_name¶

Type:

string

Default:

<None>

Name for the AMQP container. must be globally unique. Defaults to a generated UUID

Deprecated Variations¶

Group	Name
amqp1	container_name

idle_timeout¶

Type:

integer

Default:

0

Timeout for inactive connections (in seconds)

Deprecated Variations¶

Group	Name
amqp1	idle_timeout

trace¶

Type:

boolean

Default:

False

Debug: dump AMQP frames to stdout

Deprecated Variations¶

Group	Name
amqp1	trace

ssl¶

Type:

boolean

Default:

False

Attempt to connect via SSL. If no other ssl-related parameters are given, it will use the system’s CA-bundle to verify the server’s certificate.

ssl_ca_file¶

Type:

string

Default:

''

CA certificate PEM file used to verify the server’s certificate

Deprecated Variations¶

Group	Name
amqp1	ssl_ca_file

ssl_cert_file¶

Type:

string

Default:

''

Self-identifying certificate PEM file for client authentication

Deprecated Variations¶

Group	Name
amqp1	ssl_cert_file

ssl_key_file¶

Type:

string

Default:

''

Private key PEM file used to sign ssl_cert_file certificate (optional)

Deprecated Variations¶

Group	Name
amqp1	ssl_key_file

ssl_key_password¶

Type:

string

Default:

<None>

Password for decrypting ssl_key_file (if encrypted)

Deprecated Variations¶

Group	Name
amqp1	ssl_key_password

ssl_verify_vhost¶

Type:

boolean

Default:

False

By default SSL checks that the name in the server’s certificate matches the hostname in the transport_url. In some configurations it may be preferable to use the virtual hostname instead, for example if the server uses the Server Name Indication TLS extension (rfc6066) to provide a certificate per virtual host. Set ssl_verify_vhost to True if the server’s SSL certificate uses the virtual host name instead of the DNS name.

sasl_mechanisms¶

Type:

string

Default:

''

Space separated list of acceptable SASL mechanisms

Deprecated Variations¶

Group	Name
amqp1	sasl_mechanisms

sasl_config_dir¶

Type:

string

Default:

''

Path to directory that contains the SASL configuration

Deprecated Variations¶

Group	Name
amqp1	sasl_config_dir

sasl_config_name¶

Type:

string

Default:

''

Name of configuration file (without .conf suffix)

Deprecated Variations¶

Group	Name
amqp1	sasl_config_name

sasl_default_realm¶

Type:

string

Default:

''

SASL realm to use if no realm present in username

connection_retry_interval¶

Type:

integer

Default:

1

Minimum Value:

1

Seconds to pause before attempting to re-connect.

connection_retry_backoff¶

Type:

integer

Default:

2

Minimum Value:

0

Increase the connection_retry_interval by this many seconds after each unsuccessful failover attempt.

connection_retry_interval_max¶

Type:

integer

Default:

30

Minimum Value:

1

Maximum limit for connection_retry_interval + connection_retry_backoff

link_retry_delay¶

Type:

integer

Default:

10

Minimum Value:

1

Time to pause between re-connecting an AMQP 1.0 link that failed due to a recoverable error.

default_reply_retry¶

Type:

integer

Default:

0

Minimum Value:

-1

The maximum number of attempts to re-send a reply message which failed due to a recoverable error.

default_reply_timeout¶

Type:

integer

Default:

30

Minimum Value:

5

The deadline for an rpc reply message delivery.

default_send_timeout¶

Type:

integer

Default:

30

Minimum Value:

5

The deadline for an rpc cast or call message delivery. Only used when caller does not provide a timeout expiry.

default_notify_timeout¶

Type:

integer

Default:

30

Minimum Value:

5

The deadline for a sent notification message delivery. Only used when caller does not provide a timeout expiry.

default_sender_link_timeout¶

Type:

integer

Default:

600

Minimum Value:

1

The duration to schedule a purge of idle sender links. Detach link after expiry.

addressing_mode¶

Type:

string

Default:

dynamic

Indicates the addressing mode used by the driver. Permitted values: ‘legacy’ - use legacy non-routable addressing ‘routable’ - use routable addresses ‘dynamic’ - use legacy addresses if the message bus does not support routing otherwise use routable addressing

pseudo_vhost¶

Type:

boolean

Default:

True

Enable virtual host support for those message buses that do not natively support virtual hosting (such as qpidd). When set to true the virtual host name will be added to all message bus addresses, effectively creating a private ‘subnet’ per virtual host. Set to False if the message bus supports virtual hosting using the ‘hostname’ field in the AMQP 1.0 Open performative as the name of the virtual host.

server_request_prefix¶

Type:

string

Default:

exclusive

address prefix used when sending to a specific server

Deprecated Variations¶

Group	Name
amqp1	server_request_prefix

broadcast_prefix¶

Type:

string

Default:

broadcast

address prefix used when broadcasting to all servers

Deprecated Variations¶

Group	Name
amqp1	broadcast_prefix

group_request_prefix¶

Type:

string

Default:

unicast

address prefix when sending to any server in group

Deprecated Variations¶

Group	Name
amqp1	group_request_prefix

rpc_address_prefix¶

Type:

string

Default:

openstack.org/om/rpc

Address prefix for all generated RPC addresses

notify_address_prefix¶

Type:

string

Default:

openstack.org/om/notify

Address prefix for all generated Notification addresses

multicast_address¶

Type:

string

Default:

multicast

Appended to the address prefix when sending a fanout message. Used by the message bus to identify fanout messages.

unicast_address¶

Type:

string

Default:

unicast

Appended to the address prefix when sending to a particular RPC/Notification server. Used by the message bus to identify messages sent to a single destination.

anycast_address¶

Type:

string

Default:

anycast

Appended to the address prefix when sending to a group of consumers. Used by the message bus to identify messages that should be delivered in a round-robin fashion across consumers.

default_notification_exchange¶

Type:

string

Default:

<None>

Exchange name used in notification addresses. Exchange name resolution precedence: Target.exchange if set else default_notification_exchange if set else control_exchange if set else ‘notify’

default_rpc_exchange¶

Type:

string

Default:

<None>

Exchange name used in RPC addresses. Exchange name resolution precedence: Target.exchange if set else default_rpc_exchange if set else control_exchange if set else ‘rpc’

reply_link_credit¶

Type:

integer

Default:

200

Minimum Value:

1

Window size for incoming RPC Reply messages.

rpc_server_credit¶

Type:

integer

Default:

100

Minimum Value:

1

Window size for incoming RPC Request messages

notify_server_credit¶

Type:

integer

Default:

100

Minimum Value:

1

Window size for incoming Notification messages

pre_settled¶

Type:

multi-valued

Default:

rpc-cast

Default:

rpc-reply

Send messages of this type pre-settled. Pre-settled messages will not receive acknowledgement from the peer. Note well: pre-settled messages may be silently discarded if the delivery fails. Permitted values: ‘rpc-call’ - send RPC Calls pre-settled ‘rpc-reply’- send RPC Replies pre-settled ‘rpc-cast’ - Send RPC Casts pre-settled ‘notify’ - Send Notifications pre-settled

kafka_max_fetch_bytes¶

Type:

integer

Default:

1048576

Max fetch bytes of Kafka consumer

kafka_consumer_timeout¶

Type:

floating point

Default:

1.0

Default timeout(s) for Kafka consumers

pool_size¶

Type:

integer

Default:

10

Pool Size for Kafka Consumers

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:

Driver no longer uses connection pool.

conn_pool_min_size¶

Type:

integer

Default:

2

The pool size limit for connections expiration policy

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:

Driver no longer uses connection pool.

conn_pool_ttl¶

Type:

integer

Default:

1200

The time-to-live in sec of idle connections in the pool

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:

Driver no longer uses connection pool.

consumer_group¶

Type:

string

Default:

oslo_messaging_consumer

Group id for Kafka consumer. Consumers in one group will coordinate message consumption

producer_batch_timeout¶

Type:

floating point

Default:

0.0

Upper bound on the delay for KafkaProducer batching in seconds

producer_batch_size¶

Type:

integer

Default:

16384

Size of batch for the producer async send

compression_codec¶

Type:

string

Default:

none

Valid Values:

none, gzip, snappy, lz4, zstd

The compression codec for all data generated by the producer. If not set, compression will not be used. Note that the allowed values of this depend on the kafka version

enable_auto_commit¶

Type:

boolean

Default:

False

Enable asynchronous consumer commits

max_poll_records¶

Type:

integer

Default:

500

The maximum number of records returned in a poll call

security_protocol¶

Type:

string

Default:

PLAINTEXT

Valid Values:

PLAINTEXT, SASL_PLAINTEXT, SSL, SASL_SSL

Protocol used to communicate with brokers

sasl_mechanism¶

Type:

string

Default:

PLAIN

Mechanism when security protocol is SASL

ssl_cafile¶

Type:

string

Default:

''

CA certificate PEM file used to verify the server certificate

ssl_client_cert_file¶

Type:

string

Default:

''

Client certificate PEM file used for authentication.

ssl_client_key_file¶

Type:

string

Default:

''

Client key PEM file used for authentication.

ssl_client_key_password¶

Type:

string

Default:

''

Client key password file used for authentication.

driver¶

Type:

multi-valued

Default:

''

The Drivers(s) to handle sending notifications. Possible values are messaging, messagingv2, routing, log, test, noop

Deprecated Variations¶

Group	Name
DEFAULT	notification_driver

transport_url¶

Type:

string

Default:

<None>

A URL representing the messaging driver to use for notifications. If not set, we fall back to the same configuration used for RPC.

Deprecated Variations¶

Group	Name
DEFAULT	notification_transport_url

topics¶

Type:

list

Default:

['notifications']

AMQP topic used for OpenStack notifications.

Deprecated Variations¶

Group	Name
rpc_notifier2	topics
DEFAULT	notification_topics

retry¶

Type:

integer

Default:

-1

The maximum number of attempts to re-send a notification message which failed to be delivered due to a recoverable error. 0 - No retry, -1 - indefinite

amqp_durable_queues¶

Type:

boolean

Default:

False

Use durable queues in AMQP. If rabbit_quorum_queue is enabled, queues will be durable and this value will be ignored.

amqp_auto_delete¶

Type:

boolean

Default:

False

Auto-delete queues in AMQP.

Deprecated Variations¶

Group	Name
DEFAULT	amqp_auto_delete

ssl¶

Type:

boolean

Default:

False

Connect over SSL.

Deprecated Variations¶

Group	Name
oslo_messaging_rabbit	rabbit_use_ssl

ssl_version¶

Type:

string

Default:

''

SSL version to use (valid only if SSL enabled). Valid values are TLSv1 and SSLv23. SSLv2, SSLv3, TLSv1_1, and TLSv1_2 may be available on some distributions.

Deprecated Variations¶

Group	Name
oslo_messaging_rabbit	kombu_ssl_version

ssl_key_file¶

Type:

string

Default:

''

SSL key file (valid only if SSL enabled).

Deprecated Variations¶

Group	Name
oslo_messaging_rabbit	kombu_ssl_keyfile

ssl_cert_file¶

Type:

string

Default:

''

SSL cert file (valid only if SSL enabled).

Deprecated Variations¶

Group	Name
oslo_messaging_rabbit	kombu_ssl_certfile

ssl_ca_file¶

Type:

string

Default:

''

SSL certification authority file (valid only if SSL enabled).

Deprecated Variations¶

Group	Name
oslo_messaging_rabbit	kombu_ssl_ca_certs

ssl_enforce_fips_mode¶

Type:

boolean

Default:

False

Global toggle for enforcing the OpenSSL FIPS mode. This feature requires Python support. This is available in Python 3.9 in all environments and may have been backported to older Python versions on select environments. If the Python executable used does not support OpenSSL FIPS mode, an exception will be raised.

heartbeat_in_pthread¶

Type:

boolean

Default:

False

Run the health check heartbeat thread through a native python thread by default. If this option is equal to False then the health check heartbeat will inherit the execution model from the parent process. For example if the parent process has monkey patched the stdlib by using eventlet/greenlet then the heartbeat will be run through a green thread. This option should be set to True only for the wsgi services.

kombu_reconnect_delay¶

Type:

floating point

Default:

1.0

How long to wait before reconnecting in response to an AMQP consumer cancel notification.

Deprecated Variations¶

Group	Name
DEFAULT	kombu_reconnect_delay

kombu_compression¶

Type:

string

Default:

<None>

EXPERIMENTAL: Possible values are: gzip, bz2. If not set compression will not be used. This option may not be available in future versions.

kombu_missing_consumer_retry_timeout¶

Type:

integer

Default:

60

How long to wait a missing client before abandoning to send it its replies. This value should not be longer than rpc_response_timeout.

Deprecated Variations¶

Group	Name
oslo_messaging_rabbit	kombu_reconnect_timeout

kombu_failover_strategy¶

Type:

string

Default:

round-robin

Valid Values:

round-robin, shuffle

Determines how the next RabbitMQ node is chosen in case the one we are currently connected to becomes unavailable. Takes effect only if more than one RabbitMQ node is provided in config.

rabbit_login_method¶

Type:

string

Default:

AMQPLAIN

Valid Values:

PLAIN, AMQPLAIN, EXTERNAL, RABBIT-CR-DEMO

The RabbitMQ login method.

Deprecated Variations¶

Group	Name
DEFAULT	rabbit_login_method

rabbit_retry_interval¶

Type:

integer

Default:

1

How frequently to retry connecting with RabbitMQ.

rabbit_retry_backoff¶

Type:

integer

Default:

2

How long to backoff for between retries when connecting to RabbitMQ.

Deprecated Variations¶

Group	Name
DEFAULT	rabbit_retry_backoff

rabbit_interval_max¶

Type:

integer

Default:

30

Maximum interval of RabbitMQ connection retries. Default is 30 seconds.

rabbit_ha_queues¶

Type:

boolean

Default:

False

Try to use HA queues in RabbitMQ (x-ha-policy: all). If you change this option, you must wipe the RabbitMQ database. In RabbitMQ 3.0, queue mirroring is no longer controlled by the x-ha-policy argument when declaring a queue. If you just want to make sure that all queues (except those with auto-generated names) are mirrored across all nodes, run: “rabbitmqctl set_policy HA ‘^(?!amq.).*’ ‘{“ha-mode”: “all”}’ “

Deprecated Variations¶

Group	Name
DEFAULT	rabbit_ha_queues

rabbit_quorum_queue¶

Type:

boolean

Default:

False

Use quorum queues in RabbitMQ (x-queue-type: quorum). The quorum queue is a modern queue type for RabbitMQ implementing a durable, replicated FIFO queue based on the Raft consensus algorithm. It is available as of RabbitMQ 3.8.0. If set this option will conflict with the HA queues (rabbit_ha_queues) aka mirrored queues, in other words the HA queues should be disabled, quorum queues durable by default so the amqp_durable_queues opion is ignored when this option enabled.

rabbit_quorum_delivery_limit¶

Type:

integer

Default:

0

Each time a message is redelivered to a consumer, a counter is incremented. Once the redelivery count exceeds the delivery limit the message gets dropped or dead-lettered (if a DLX exchange has been configured) Used only when rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.

rabbit_quroum_max_memory_length¶

Type:

integer

Default:

0

By default all messages are maintained in memory if a quorum queue grows in length it can put memory pressure on a cluster. This option can limit the number of messages in the quorum queue. Used only when rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.

rabbit_quroum_max_memory_bytes¶

Type:

integer

Default:

0

By default all messages are maintained in memory if a quorum queue grows in length it can put memory pressure on a cluster. This option can limit the number of memory bytes used by the quorum queue. Used only when rabbit_quorum_queue is enabled, Default 0 which means dont set a limit.

rabbit_transient_queues_ttl¶

Type:

integer

Default:

1800

Minimum Value:

1

Positive integer representing duration in seconds for queue TTL (x-expires). Queues which are unused for the duration of the TTL are automatically deleted. The parameter affects only reply and fanout queues.

rabbit_qos_prefetch_count¶

Type:

integer

Default:

0

Specifies the number of messages to prefetch. Setting to zero allows unlimited messages.

heartbeat_timeout_threshold¶

Type:

integer

Default:

60

Number of seconds after which the Rabbit broker is considered down if heartbeat’s keep-alive fails (0 disables heartbeat).

heartbeat_rate¶

Type:

integer

Default:

2

How often times during the heartbeat_timeout_threshold we check the heartbeat.

direct_mandatory_flag¶

Type:

boolean

Default:

True

(DEPRECATED) Enable/Disable the RabbitMQ mandatory flag for direct send. The direct send is used as reply, so the MessageUndeliverable exception is raised in case the client queue does not exist.MessageUndeliverable exception will be used to loop for a timeout to lets a chance to sender to recover.This flag is deprecated and it will not be possible to deactivate this functionality anymore

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

Reason:

Mandatory flag no longer deactivable.

enable_cancel_on_failover¶

Type:

boolean

Default:

False

Enable x-cancel-on-ha-failover flag so that rabbitmq server will cancel and notify consumerswhen queue is down

max_request_body_size¶

Type:

integer

Default:

114688

The maximum body size for each request, in bytes.

Deprecated Variations¶

Group	Name
DEFAULT	osapi_max_request_body_size
DEFAULT	max_request_body_size

secure_proxy_ssl_header¶

Type:

string

Default:

X-Forwarded-Proto

The HTTP Header that will be used to determine what the original request protocol scheme was, even if it was hidden by a SSL termination proxy.

Warning

This option is deprecated for removal. Its value may be silently ignored in the future.

enable_proxy_headers_parsing¶

Type:

boolean

Default:

False

Whether the application is behind a proxy or not. This determines if the middleware should parse the headers or not.

http_basic_auth_user_file¶

Type:

string

Default:

/etc/htpasswd

HTTP basic auth password file.

enforce_scope¶

Type:

boolean

Default:

False

This option controls whether or not to enforce scope when evaluating policies. If True, the scope of the token used in the request is compared to the scope_types of the policy being enforced. If the scopes do not match, an InvalidScope exception will be raised. If False, a message will be logged informing operators that policies are being invoked with mismatching scope.

enforce_new_defaults¶

Type:

boolean

Default:

False

This option controls whether or not to use old deprecated defaults when evaluating policies. If True, the old deprecated defaults are not going to be evaluated. This means if any existing token is allowed for old defaults but is disallowed for new defaults, it will be disallowed. It is encouraged to enable this flag along with the enforce_scope flag so that you can get the benefits of new defaults and scope_type together. If False, the deprecated policy check string is logically OR’d with the new policy check string, allowing for a graceful upgrade experience between releases with new policies, which is the default behavior.

policy_file¶

Type:

string

Default:

policy.yaml

The relative or absolute path of a file that maps roles to permissions for a given service. Relative paths must be specified in relation to the configuration file setting this option.

Deprecated Variations¶

Group	Name
DEFAULT	policy_file

policy_default_rule¶

Type:

string

Default:

default

Default rule. Enforced when a requested rule is not found.

Deprecated Variations¶

Group	Name
DEFAULT	policy_default_rule

policy_dirs¶

Type:

multi-valued

Default:

policy.d

Directories where policy configuration files are stored. They can be relative to any directory in the search path defined by the config_dir option, or absolute paths. The file defined by policy_file must exist for these directories to be searched. Missing or empty directories are ignored.

Deprecated Variations¶

Group	Name
DEFAULT	policy_dirs

remote_content_type¶

Type:

string

Default:

application/x-www-form-urlencoded

Valid Values:

application/x-www-form-urlencoded, application/json

Content Type to send and receive data for REST based policy check

remote_ssl_verify_server_crt¶

Type:

boolean

Default:

False

server identity verification for REST based policy check

remote_ssl_ca_crt_file¶

Type:

string

Default:

<None>

Absolute path to ca cert file for REST based policy check

remote_ssl_client_crt_file¶

Type:

string

Default:

<None>

Absolute path to client cert for REST based policy check

remote_ssl_client_key_file¶

Type:

string

Default:

<None>

Absolute path client key file REST based policy check

driver¶

Type:

string

Default:

sql

Entry point for the policy backend driver in the keystone.policy namespace. Supplied drivers are rules (which does not support any CRUD operations for the v3 policy API) and sql. Typically, there is no reason to set this option unless you are providing a custom entry point.

list_limit¶

Type:

integer

Default:

<None>

Maximum number of entities that will be returned in a policy collection.

enabled¶

Type:

boolean

Default:

False

Enable the profiling for all services on this node.

Default value is False (fully disable the profiling feature).

Possible values:

• True: Enables the feature

• False: Disables the feature. The profiling cannot be started via this project operations. If the profiling is triggered by another project, this project part will be empty.

Deprecated Variations¶

Group	Name
profiler	profiler_enabled

trace_sqlalchemy¶

Type:

boolean

Default:

False

Enable SQL requests profiling in services.

Default value is False (SQL requests won’t be traced).

Possible values:

• True: Enables SQL requests profiling. Each SQL query will be part of the trace and can the be analyzed by how much time was spent for that.

• False: Disables SQL requests profiling. The spent time is only shown on a higher level of operations. Single SQL queries cannot be analyzed this way.

hmac_keys¶

Type:

string

Default:

SECRET_KEY

Secret key(s) to use for encrypting context data for performance profiling.

This string value should have the following format: <key1>[,<key2>,…<keyn>], where each key is some random string. A user who triggers the profiling via the REST API has to set one of these keys in the headers of the REST API call to include profiling results of this node for this particular project.

Both “enabled” flag and “hmac_keys” config options should be set to enable profiling. Also, to generate correct profiling information across all services at least one key needs to be consistent between OpenStack projects. This ensures it can be used from client side to generate the trace, containing information from all possible resources.

connection_string¶

Type:

string

Default:

messaging://

Connection string for a notifier backend.

Default value is messaging:// which sets the notifier to oslo_messaging.

Examples of possible values:

• messaging:// - use oslo_messaging driver for sending spans.

• redis://127.0.0.1:6379 - use redis driver for sending spans.

• mongodb://127.0.0.1:27017 - use mongodb driver for sending spans.

• elasticsearch://127.0.0.1:9200 - use elasticsearch driver for sending spans.

• jaeger://127.0.0.1:6831 - use jaeger tracing as driver for sending spans.

es_doc_type¶

Type:

string

Default:

notification

Document type for notification indexing in elasticsearch.

es_scroll_time¶

Type:

string

Default:

2m

This parameter is a time value parameter (for example: es_scroll_time=2m), indicating for how long the nodes that participate in the search will maintain relevant resources in order to continue and support it.

es_scroll_size¶

Type:

integer

Default:

10000

Elasticsearch splits large requests in batches. This parameter defines maximum size of each batch (for example: es_scroll_size=10000).

socket_timeout¶

Type:

floating point

Default:

0.1

Redissentinel provides a timeout option on the connections. This parameter defines that timeout (for example: socket_timeout=0.1).