Unix Binary Release • Mac OS X Binary Release • iOS Binary Release • Windows Binary Release
You can install ImageMagick from source. However, if you don't have a proper development environment or if you're anxious to get started, download a ready-to-run Unix or Windows executable. Before you download, you may want to review recent changes to the ImageMagick distribution.
ImageMagick source and binary distributions are available from a variety of FTP and Web mirrors around the world.
These are the Unix variations that we support. If your system is not on the list, try installing from source. Although ImageMagick runs fine on a single core computer, it automagically runs in parallel on multi-core systems reducing run times considerably.
| Version | Description |
|---|---|
| magick | Complete portable application on Linux, no installation required. Just download and run. AppImages require FUSE and libc to run. Many distributions have a working FUSE setup out-of-the-box. However if it is not working for you, you must install and configure FUSE manually. |
| ImageMagick-6.9.11-60.x86_64.rpm | Redhat / CentOS 8.3 x86_64 RPM |
| ImageMagick-libs-6.9.11-60.x86_64.rpm | Redhat / CentOS 8.3 x86_64 RPM |
| ImageMagick RPM's | Development, Perl, C++, and documentation RPM's. |
| ImageMagick-i386-pc-solaris2.11.tar.gz | Solaris Sparc 2.11 |
| ImageMagick-i686-pc-cygwin.tar.gz | Cygwin |
| ImageMagick-i686-pc-mingw32.tar.gz | MinGW |
Verify its message digest.
ImageMagick RPM's are self-installing. Simply type the following command and you're ready to start using ImageMagick:
$ rpm -Uvh ImageMagick-6.9.11-60.x86_64.rpm
You'll need the libraries as well:
$ rpm -Uvh ImageMagick-libs-6.9.11-60.x86_64.rpm
Note, if there are missing dependencies, install them from the EPEL repo.
For other systems, create (or choose) a directory to install the package into and change to that directory, for example:
cd $HOMENext, extract the contents of the package. For example:
tar xvzf ImageMagick.tar.gzSet the MAGICK_HOME environment variable to the path where you extracted the ImageMagick files. For example:
$ export MAGICK_HOME="$HOME/ImageMagick-6.9.11"
If the bin subdirectory of the extracted package is not already in your executable search path, add it to your PATH environment variable. For example:
export PATH="$MAGICK_HOME/bin:$PATHOn Linux and Solaris machines add $MAGICK_HOME/lib to the LD_LIBRARY_PATH environment variable:
LD_LIBRARY_PATH="${LD_LIBRARY_PATH:+$LD_LIBRARY_PATH:}$MAGICK_HOME/lib
export LD_LIBRARY_PATHFinally, to verify ImageMagick is working properly, type the following on the command line:
convert logo: logo.gif
identify logo.gif
display logo.gifCongratulations, you have a working ImageMagick distribution under Unix or Linux and you are ready to use ImageMagick to your images or perhaps you'll want to use one of the Application Program Interfaces for C, C++, Perl, and others.
We recommend Homebrew which provides pre-built binaries for Mac (some users prefer MacPorts). Download HomeBrew and type:
brew install imagemagickImageMagick depends on Ghostscript fonts. To install them, type:
brew install ghostscriptThe brew command downloads and installs ImageMagick with many of its delegate libraries (e.g. JPEG, PNG, Freetype, etc). Homebrew no longer allows configurable builds; if you need different compile options (e.g. librsvg support), you can download the ImageMagick Mac OS X distribution we provide:
| Version | Description |
|---|---|
| ImageMagick-x86_64-apple-darwin20.1.0.tar.gz | macOS High Sierra |
Verify its message digest.
Create (or choose) a directory to install the package into and change to that directory, for example:
cd $HOMENext, extract the contents of the package. For example:
tar xvzf ImageMagick-x86_64-apple-darwin20.1.0.tar.gzSet the MAGICK_HOME environment variable to the path where you extracted the ImageMagick files. For example:
$ export MAGICK_HOME="$HOME/ImageMagick-6.9.11"
If the bin subdirectory of the extracted package is not already in your executable search path, add it to your PATH environment variable. For example:
export PATH="$MAGICK_HOME/bin:$PATH"Set the DYLD_LIBRARY_PATH environment variable:
export DYLD_LIBRARY_PATH="$MAGICK_HOME/lib/"Finally, to verify ImageMagick is working properly, type the following on the command line:
convert logo: logo.gif
identify logo.gif
display logo.gifNote, the display program requires the X11 server available on your Mac OS X installation DVD. Once that is installed, you will also need to set export DISPLAY=:0.
The best way to deal with all the exports is to put them at the end of your .profile file
Congratulations, you have a working ImageMagick distribution under Mac OS X and you are ready to use ImageMagick to your images or perhaps you'll want to use one of the Application Program Interfaces for C, C++, Perl, and others.
~Claudio provides iOS builds of ImageMagick.
You can download the iOS distribution directly from ImageMagick's repository.
There are always 2 packages for the compiled ImageMagick:
The first one includes headers and compiled libraries that have been used to compile ImageMagick. Most users would need this one.
To run the script:
./imagemagick_compile.sh VERSIONwhere VERSION is the version of ImageMagick you want to compile (i.e.: 6.9.11-60, svn, ...)
This script compiles ImageMagick as a static library to be included in iOS projects and adds support for
Upon successful compilation a folder called IMPORT_ME is created on your ~/Desktop. You can import it into your Xcode project.
After including everything into Xcode please also make sure to have these settings (Build tab of the project information):
On the lower left click on the small-wheel and select: Add User-Defined Setting
A sample project is available for download. It is not updated too often, but it does give an idea of all the settings and some ways to play around with ImageMagick in an iOS application.
ImageMagick runs on Windows 10 (x86 & x64), Windows 8 (x86 & x64), Windows 7 (x86 & x64), Windows Server 2012, Windows Vista (x86 & x64) with Service Pack 2, Windows Server 2008 (x86 & x64) with Service Pack 2, and Windows Server 2008 R2 (x64).
The amount of memory can be an important factor, especially if you intend to work on large images. A minimum of 512 MB of RAM is recommended, but the more RAM the better. Although ImageMagick runs well on a single core computer, it automagically runs in parallel on multi-core systems reducing run times considerably.
The Windows version of ImageMagick is self-installing. Simply click on the appropriate version below and it will launch itself and ask you a few installation questions. Versions with Q8 in the name are 8 bits-per-pixel component (e.g. 8-bit red, 8-bit green, etc.), whereas, Q16 in the filename are 16 bits-per-pixel component. A Q16 version permits you to read or write 16-bit images without losing precision but requires twice as much resources as the Q8 version. Versions with dll in the filename include ImageMagick libraries as dynamic link libraries. Unless you have a Windows 32-bit OS, we recommend this version of ImageMagick for 64-bit Windows:
| Version | Description |
|---|---|
| ImageMagick-6.9.11-60-Q16-HDRI-x64-dll.exe | Win64 dynamic at 16 bits-per-pixel component |
Or choose from these alternate Windows binary distributions:
| Version | Description |
|---|---|
| ImageMagick-6.9.11-60-Q16-x64-static.exe | Win64 static at 16 bits-per-pixel component |
| ImageMagick-6.9.11-60-Q8-x64-dll.exe | Win64 dynamic at 8 bits-per-pixel component |
| ImageMagick-6.9.11-60-Q8-x64-static.exe | Win64 static at 8 bits-per-pixel component |
| ImageMagick-6.9.11-60-Q16-x64-dll.exe | Win64 dynamic at 16 bits-per-pixel component |
| ImageMagick-6.9.11-60-Q16-HDRI-x64-dll.exe | Win64 dynamic at 16 bits-per-pixel component with high dynamic-range imaging enabled |
| ImageMagick-6.9.11-60-Q16-HDRI-x64-static.exe | Win64 static at 16 bits-per-pixel component with high dynamic-range imaging enabled |
| ImageMagick-6.9.11-60-Q16-x86-dll.exe | Win32 dynamic at 16 bits-per-pixel component |
| ImageMagick-6.9.11-60-Q16-x86-static.exe | Win32 static at 16 bits-per-pixel component |
| ImageMagick-6.9.11-60-Q8-x86-dll.exe | Win32 dynamic at 8 bits-per-pixel component |
| ImageMagick-6.9.11-60-Q8-x86-static.exe | Win32 static at 8 bits-per-pixel component |
| ImageMagick-6.9.11-60-Q16-HDRI-x86-dll.exe | Win32 dynamic at 16 bits-per-pixel component with high dynamic-range imaging enabled |
| ImageMagick-6.9.11-60-Q16-HDRI-x86-static.exe | Win32 static at 16 bits-per-pixel component with high dynamic-range imaging enabled |
| ImageMagick-6.9.11-60-portable-Q16-x64.zip | Portable Win64 static at 16 bits-per-pixel component. Just copy to your host and run (no installer, no Windows registry entries). |
| ImageMagick-6.9.11-60-portable-Q16-x86.zip | Portable Win32 static at 16 bits-per-pixel component. Just copy to your host and run (no installer, no Windows registry entries). |
| ImageMagick-6.9.11-60-portable-Q8-x64.zip | Portable Win64 static at 8 bits-per-pixel component. Just copy to your host and run (no installer, no Windows registry entries). |
| ImageMagick-6.9.11-60-portable-Q8-x86.zip | Portable Win32 static at 8 bits-per-pixel component. Just copy to your host and run (no installer, no Windows registry entries). |
| ImageMagick-6.9.11-60-portable-Q16-HDRI-x64.zip | Portable Win64 static at 16 bits-per-pixel component with high dynamic-range imaging enabled. Just copy to your host and run (no installer, no Windows registry entries). |
| ImageMagick-6.9.11-60-portable-Q16-HDRI-x86.zip | Portable Win32 static at 16 bits-per-pixel component with high dynamic-range imaging enabled. Just copy to your host and run (no installer, no Windows registry entries). |
Verify its message digest.
To verify ImageMagick is working properly, type the following in an Command Prompt window:
convert logo: logo.gif
convert identify logo.gif
convert logo.gif win:If you have any problems, you likely need vcomp120.dll. To install it, download Visual C++ Redistributable Package.
Note, use a double quote (") rather than a single quote (') for the ImageMagick command line under Windows:
convert "e:/myimages/image.png" "e:/myimages/image.jpg"Use two double quotes for VBScript scripts:
Set objShell = wscript.createobject("wscript.shell")
objShell.Exec("convert ""e:/myimages/image.png"" ""e:/myimages/image.jpg""")Congratulations, you have a working ImageMagick distribution under Windows and you are ready to use ImageMagick to your images or perhaps you'll want to use one of the Application Program Interfaces for C, C++, Perl, and others.