A mutable set of Unicode characters and multicharacter strings. More...

#include <uniset.h>

Inheritance diagram for icu::UnicodeSet:

Public Types
enum	{ MIN_VALUE = 0 , MAX_VALUE = 0x10ffff }

enum	ESerialization { kSerialized }

Public Member Functions
UBool	isBogus (void) const
	Determine if this object contains a valid set. More...

void	setToBogus ()
	Make this UnicodeSet object invalid. More...

	UnicodeSet ()
	Constructs an empty set. More...

	UnicodeSet (UChar32 start, UChar32 end)
	Constructs a set containing the given range. More...

	UnicodeSet (const uint16_t buffer[], int32_t bufferLen, ESerialization serialization, UErrorCode &status)
	Constructs a set from the output of serialize(). More...

	UnicodeSet (const UnicodeString &pattern, UErrorCode &status)
	Constructs a set from the given pattern. More...

	UnicodeSet (const UnicodeString &pattern, uint32_t options, const SymbolTable *symbols, UErrorCode &status)
	Constructs a set from the given pattern. More...

	UnicodeSet (const UnicodeString &pattern, ParsePosition &pos, uint32_t options, const SymbolTable *symbols, UErrorCode &status)
	Constructs a set from the given pattern. More...

	UnicodeSet (const UnicodeSet &o)
	Constructs a set that is identical to the given UnicodeSet. More...

virtual	~UnicodeSet ()
	Destructs the set. More...

UnicodeSet &	operator= (const UnicodeSet &o)
	Assigns this object to be a copy of another. More...

virtual bool	operator== (const UnicodeSet &o) const
	Compares the specified object with this set for equality. More...

bool	operator!= (const UnicodeSet &o) const
	Compares the specified object with this set for equality. More...

virtual UnicodeSet *	clone () const override
	Returns a copy of this object. More...

virtual int32_t	hashCode (void) const
	Returns the hash code value for this set. More...

USet *	toUSet ()
	Produce a USet * pointer for this UnicodeSet. More...

const USet *	toUSet () const
	Produce a const USet * pointer for this UnicodeSet. More...

UBool	isFrozen () const
	Determines whether the set has been frozen (made immutable) or not. More...

UnicodeSet *	freeze ()
	Freeze the set (make it immutable). More...

UnicodeSet *	cloneAsThawed () const
	Clone the set and make the clone mutable. More...

UnicodeSet &	set (UChar32 start, UChar32 end)
	Make this object represent the range `start - end`. More...

UnicodeSet &	applyPattern (const UnicodeString &pattern, UErrorCode &status)
	Modifies this set to represent the set specified by the given pattern, ignoring Unicode Pattern_White_Space characters. More...

UnicodeSet &	applyPattern (const UnicodeString &pattern, uint32_t options, const SymbolTable *symbols, UErrorCode &status)
	Modifies this set to represent the set specified by the given pattern, optionally ignoring Unicode Pattern_White_Space characters. More...

UnicodeSet &	applyPattern (const UnicodeString &pattern, ParsePosition &pos, uint32_t options, const SymbolTable *symbols, UErrorCode &status)
	Parses the given pattern, starting at the given position. More...

virtual UnicodeString &	toPattern (UnicodeString &result, UBool escapeUnprintable=false) const override
	Returns a string representation of this set. More...

UnicodeSet &	applyIntPropertyValue (UProperty prop, int32_t value, UErrorCode &ec)
	Modifies this set to contain those code points which have the given value for the given binary or enumerated property, as returned by u_getIntPropertyValue. More...

UnicodeSet &	applyPropertyAlias (const UnicodeString &prop, const UnicodeString &value, UErrorCode &ec)
	Modifies this set to contain those code points which have the given value for the given property. More...

virtual int32_t	size (void) const
	Returns the number of elements in this set (its cardinality). More...

virtual UBool	isEmpty (void) const
	Returns `true` if this set contains no elements. More...

UBool	hasStrings () const

virtual UBool	contains (UChar32 c) const override
	Returns true if this set contains the given character. More...

virtual UBool	contains (UChar32 start, UChar32 end) const
	Returns true if this set contains every character of the given range. More...

UBool	contains (const UnicodeString &s) const
	Returns `true` if this set contains the given multicharacter string. More...

virtual UBool	containsAll (const UnicodeSet &c) const
	Returns true if this set contains all the characters and strings of the given set. More...

UBool	containsAll (const UnicodeString &s) const
	Returns true if this set contains all the characters of the given string. More...

UBool	containsNone (UChar32 start, UChar32 end) const
	Returns true if this set contains none of the characters of the given range. More...

UBool	containsNone (const UnicodeSet &c) const
	Returns true if this set contains none of the characters and strings of the given set. More...

UBool	containsNone (const UnicodeString &s) const
	Returns true if this set contains none of the characters of the given string. More...

UBool	containsSome (UChar32 start, UChar32 end) const
	Returns true if this set contains one or more of the characters in the given range. More...

UBool	containsSome (const UnicodeSet &s) const
	Returns true if this set contains one or more of the characters and strings of the given set. More...

UBool	containsSome (const UnicodeString &s) const
	Returns true if this set contains one or more of the characters of the given string. More...

int32_t	span (const char16_t *s, int32_t length, USetSpanCondition spanCondition) const
	Returns the length of the initial substring of the input string which consists only of characters and strings that are contained in this set (USET_SPAN_CONTAINED, USET_SPAN_SIMPLE), or only of characters and strings that are not contained in this set (USET_SPAN_NOT_CONTAINED). More...

int32_t	span (const UnicodeString &s, int32_t start, USetSpanCondition spanCondition) const
	Returns the end of the substring of the input string according to the USetSpanCondition. More...

int32_t	spanBack (const char16_t *s, int32_t length, USetSpanCondition spanCondition) const
	Returns the start of the trailing substring of the input string which consists only of characters and strings that are contained in this set (USET_SPAN_CONTAINED, USET_SPAN_SIMPLE), or only of characters and strings that are not contained in this set (USET_SPAN_NOT_CONTAINED). More...

int32_t	spanBack (const UnicodeString &s, int32_t limit, USetSpanCondition spanCondition) const
	Returns the start of the substring of the input string according to the USetSpanCondition. More...

int32_t	spanUTF8 (const char *s, int32_t length, USetSpanCondition spanCondition) const
	Returns the length of the initial substring of the input string which consists only of characters and strings that are contained in this set (USET_SPAN_CONTAINED, USET_SPAN_SIMPLE), or only of characters and strings that are not contained in this set (USET_SPAN_NOT_CONTAINED). More...

int32_t	spanBackUTF8 (const char *s, int32_t length, USetSpanCondition spanCondition) const
	Returns the start of the trailing substring of the input string which consists only of characters and strings that are contained in this set (USET_SPAN_CONTAINED, USET_SPAN_SIMPLE), or only of characters and strings that are not contained in this set (USET_SPAN_NOT_CONTAINED). More...

virtual UMatchDegree	matches (const Replaceable &text, int32_t &offset, int32_t limit, UBool incremental) override
	Implement UnicodeMatcher::matches() More...

virtual void	addMatchSetTo (UnicodeSet &toUnionTo) const override
	Implementation of UnicodeMatcher API. More...

int32_t	indexOf (UChar32 c) const
	Returns the index of the given character within this set, where the set is ordered by ascending code point. More...

UChar32	charAt (int32_t index) const
	Returns the character at the given index within this set, where the set is ordered by ascending code point. More...

virtual UnicodeSet &	add (UChar32 start, UChar32 end)
	Adds the specified range to this set if it is not already present. More...

UnicodeSet &	add (UChar32 c)
	Adds the specified character to this set if it is not already present. More...

UnicodeSet &	add (const UnicodeString &s)
	Adds the specified multicharacter to this set if it is not already present. More...

UnicodeSet &	addAll (const UnicodeString &s)
	Adds each of the characters in this string to the set. More...

UnicodeSet &	retainAll (const UnicodeString &s)
	Retains EACH of the characters in this string. More...

UnicodeSet &	complementAll (const UnicodeString &s)
	Complement EACH of the characters in this string. More...

UnicodeSet &	removeAll (const UnicodeString &s)
	Remove EACH of the characters in this string. More...

virtual UnicodeSet &	retain (UChar32 start, UChar32 end)
	Retain only the elements in this set that are contained in the specified range. More...

UnicodeSet &	retain (UChar32 c)
	Retain the specified character from this set if it is present. More...

UnicodeSet &	retain (const UnicodeString &s)
	Retains only the specified string from this set if it is present. More...

virtual UnicodeSet &	remove (UChar32 start, UChar32 end)
	Removes the specified range from this set if it is present. More...

UnicodeSet &	remove (UChar32 c)
	Removes the specified character from this set if it is present. More...

UnicodeSet &	remove (const UnicodeString &s)
	Removes the specified string from this set if it is present. More...

virtual UnicodeSet &	complement ()
	This is equivalent to `complement(MIN_VALUE, MAX_VALUE)`. More...

virtual UnicodeSet &	complement (UChar32 start, UChar32 end)
	Complements the specified range in this set. More...

UnicodeSet &	complement (UChar32 c)
	Complements the specified character in this set. More...

UnicodeSet &	complement (const UnicodeString &s)
	Complement the specified string in this set. More...

virtual UnicodeSet &	addAll (const UnicodeSet &c)
	Adds all of the elements in the specified set to this set if they're not already present. More...

virtual UnicodeSet &	retainAll (const UnicodeSet &c)
	Retains only the elements in this set that are contained in the specified set. More...

virtual UnicodeSet &	removeAll (const UnicodeSet &c)
	Removes from this set all of its elements that are contained in the specified set. More...

virtual UnicodeSet &	complementAll (const UnicodeSet &c)
	Complements in this set all elements contained in the specified set. More...

virtual UnicodeSet &	clear (void)
	Removes all of the elements from this set. More...

UnicodeSet &	closeOver (int32_t attribute)
	Close this set over the given attribute. More...

virtual UnicodeSet &	removeAllStrings ()
	Remove all strings from this set. More...

virtual int32_t	getRangeCount (void) const
	Iteration method that returns the number of ranges contained in this set. More...

virtual UChar32	getRangeStart (int32_t index) const
	Iteration method that returns the first character in the specified range of this set. More...

virtual UChar32	getRangeEnd (int32_t index) const
	Iteration method that returns the last character in the specified range of this set. More...

int32_t	serialize (uint16_t *dest, int32_t destCapacity, UErrorCode &ec) const
	Serializes this set into an array of 16-bit integers. More...

virtual UnicodeSet &	compact ()
	Reallocate this objects internal structures to take up the least possible space, without changing this object's value. More...

virtual UClassID	getDynamicClassID (void) const override
	Implement UnicodeFunctor API. More...

Public Member Functions inherited from icu::UnicodeFilter
virtual	~UnicodeFilter ()
	Destructor. More...

virtual UnicodeFilter *	clone () const override=0
	Clones this object polymorphically. More...

virtual UBool	contains (UChar32 c) const =0
	Returns `true` for characters that are in the selected subset. More...

virtual UnicodeMatcher *	toMatcher () const override
	UnicodeFunctor API. More...

virtual UMatchDegree	matches (const Replaceable &text, int32_t &offset, int32_t limit, UBool incremental) override
	Implement UnicodeMatcher API. More...

virtual void	setData (const TransliterationRuleData *) override
	UnicodeFunctor API. More...

Public Member Functions inherited from icu::UnicodeFunctor
virtual	~UnicodeFunctor ()
	Destructor. More...

virtual UnicodeFunctor *	clone () const =0
	Return a copy of this object. More...

virtual UnicodeMatcher *	toMatcher () const
	Cast 'this' to a UnicodeMatcher* pointer and return the pointer, or null if this is not a UnicodeMatcher*. More...

virtual UnicodeReplacer *	toReplacer () const
	Cast 'this' to a UnicodeReplacer* pointer and return the pointer, or null if this is not a UnicodeReplacer*. More...

virtual UClassID	getDynamicClassID (void) const override=0
	Returns a unique class ID polymorphically. More...

virtual void	setData (const TransliterationRuleData *)=0
	Set the data object associated with this functor. More...

Public Member Functions inherited from icu::UObject
virtual	~UObject ()
	Destructor. More...

virtual UClassID	getDynamicClassID () const
	ICU4C "poor man's RTTI", returns a UClassID for the actual ICU class. More...

Public Member Functions inherited from icu::UnicodeMatcher
virtual	~UnicodeMatcher ()
	Destructor. More...

virtual UMatchDegree	matches (const Replaceable &text, int32_t &offset, int32_t limit, UBool incremental)=0
	Return a UMatchDegree value indicating the degree of match for the given text at the given offset. More...

virtual UnicodeString &	toPattern (UnicodeString &result, UBool escapeUnprintable=false) const =0
	Returns a string representation of this matcher. More...

virtual UBool	matchesIndexValue (uint8_t v) const =0
	Returns true if this matcher will match a character c, where c & 0xFF == v, at offset, in the forward direction (with limit > offset). More...

virtual void	addMatchSetTo (UnicodeSet &toUnionTo) const =0
	Union the set of all characters that may be matched by this object into the given set. More...

Static Public Member Functions
static UnicodeSet *	fromUSet (USet *uset)
	Get a UnicodeSet pointer from a USet. More...

static const UnicodeSet *	fromUSet (const USet *uset)
	Get a UnicodeSet pointer from a const USet. More...

static UBool	resemblesPattern (const UnicodeString &pattern, int32_t pos)
	Return true if the given position, in the given pattern, appears to be the start of a UnicodeSet pattern. More...

static UnicodeSet *	createFrom (const UnicodeString &s)
	Makes a set from a multicharacter string. More...

static UnicodeSet *	createFromAll (const UnicodeString &s)
	Makes a set from each of the characters in the string. More...

static UClassID	getStaticClassID (void)
	Return the class ID for this class. More...

Static Public Member Functions inherited from icu::UnicodeFilter
static UClassID	getStaticClassID ()
	ICU "poor man's RTTI", returns a UClassID for this class. More...

Static Public Member Functions inherited from icu::UnicodeFunctor
static UClassID	getStaticClassID (void)
	Return the class ID for this class. More...

Friends
class	USetAccess

class	RBBIRuleScanner

class	UnicodeSetIterator

Detailed Description

A mutable set of Unicode characters and multicharacter strings.

Objects of this class represent character classes used in regular expressions. A character specifies a subset of Unicode code points. Legal code points are U+0000 to U+10FFFF, inclusive.

The UnicodeSet class is not designed to be subclassed.

UnicodeSet supports two APIs. The first is the operand API that allows the caller to modify the value of a UnicodeSet object. It conforms to Java 2's java.util.Set interface, although UnicodeSet does not actually implement that interface. All methods of Set are supported, with the modification that they take a character range or single character instead of an Object, and they take a UnicodeSet instead of a Collection. The operand API may be thought of in terms of boolean logic: a boolean OR is implemented by add, a boolean AND is implemented by retain, a boolean XOR is implemented by complement taking an argument, and a boolean NOT is implemented by complement with no argument. In terms of traditional set theory function names, add is a union, retain is an intersection, remove is an asymmetric difference, and complement with no argument is a set complement with respect to the superset range MIN_VALUE-MAX_VALUE

The second API is the applyPattern()/toPattern() API from the java.text.Format-derived classes. Unlike the methods that add characters, add categories, and control the logic of the set, the method applyPattern() sets all attributes of a UnicodeSet at once, based on a string pattern.

Pattern syntax

Patterns are accepted by the constructors and the applyPattern() methods and returned by the toPattern() method. These patterns follow a syntax similar to that employed by version 8 regular expression character classes. Here are some simple examples:

[] No characters

[a] The character 'a'

[ae] The characters 'a' and 'e'

[a-e] The characters 'a' through 'e' inclusive, in Unicode code point order

[\u4E01] The character U+4E01

[a{ab}{ac}] The character 'a' and the multicharacter strings "ab" and "ac"

[\p{Lu}] All characters in the general category Uppercase Letter

Any character may be preceded by a backslash in order to remove any special meaning. White space characters, as defined by UCharacter.isWhitespace(), are ignored, unless they are escaped.

Property patterns specify a set of characters having a certain property as defined by the Unicode standard. Both the POSIX-like "[:Lu:]" and the Perl-like syntax "\\p{Lu}" are recognized. For a complete list of supported property patterns, see the User's Guide for UnicodeSet at https://unicode-org.github.io/icu/userguide/strings/unicodeset. Actual determination of property data is defined by the underlying Unicode database as implemented by UCharacter.

Patterns specify individual characters, ranges of characters, and Unicode property sets. When elements are concatenated, they specify their union. To complement a set, place a '^' immediately after the opening '['. Property patterns are inverted by modifying their delimiters; "[:^foo]" and "\\P{foo}". In any other location, '^' has no special meaning.

Since ICU 70, "[^...]", "[:^foo]", "\\P{foo}", and "[:binaryProperty=No:]" perform a “code point complement” (all code points minus the original set), removing all multicharacter strings, equivalent to .complement().removeAllStrings(). The complement() API function continues to perform a symmetric difference with all code points and thus retains all multicharacter strings.

Ranges are indicated by placing two a '-' between two characters, as in "a-z". This specifies the range of all characters from the left to the right, in Unicode order. If the left character is greater than or equal to the right character it is a syntax error. If a '-' occurs as the first character after the opening '[' or '[^', or if it occurs as the last character before the closing ']', then it is taken as a literal. Thus "[a\-b]", "[-ab]", and "[ab-]" all indicate the same set of three characters, 'a', 'b', and '-'.

Sets may be intersected using the '&' operator or the asymmetric set difference may be taken using the '-' operator, for example, "[[:L:]&[\\u0000-\\u0FFF]]" indicates the set of all Unicode letters with values less than 4096. Operators ('&' and '|') have equal precedence and bind left-to-right. Thus "[[:L:]-[a-z]-[\\u0100-\\u01FF]]" is equivalent to "[[[:L:]-[a-z]]-[\\u0100-\\u01FF]]". This only really matters for difference; intersection is commutative.

`[a]`	The set containing 'a'
`[a-z]`	The set containing 'a' through 'z' and all letters in between, in Unicode order
`[^a-z]`	The set containing all characters but 'a' through 'z', that is, U+0000 through 'a'-1 and 'z'+1 through U+10FFFF
`[[pat1][pat2]]`	The union of sets specified by pat1 and pat2
`[[pat1]&[pat2]]`	The intersection of sets specified by pat1 and pat2
`[[pat1]-[pat2]]`	The asymmetric difference of sets specified by pat1 and pat2
`[:Lu:] or \p{Lu}`	The set of characters having the specified Unicode property; in this case, Unicode uppercase letters
`[:^Lu:] or \P{Lu}`	The set of characters not having the given Unicode property

Formal syntax

pattern := ('[' '^'? item* ']') | property

item := char | (char '-' char) | pattern-expr

pattern-expr := pattern | pattern-expr pattern | pattern-expr op pattern

op := '&' | '-'

special := '[' | ']' | '-'

char := any character that is notspecial | ('\'any character) | ('\u' hex hex hex hex)

hex := '0' | '1' | '2' | '3' | '4' | '5' | '6' | '7' | '8' | '9' | 'A' | 'B' | 'C' | 'D' | 'E' | 'F' | 'a' | 'b' | 'c' | 'd' | 'e' | 'f'

property := a Unicode property set pattern

Legend:

a := b a may be replaced by b

a? zero or one instance of a

a* one or more instances of a

a | b either a or b

'a' the literal string between the quotes

Note:

Most UnicodeSet methods do not take a UErrorCode parameter because there are usually very few opportunities for failure other than a shortage of memory, error codes in low-level C++ string methods would be inconvenient, and the error code as the last parameter (ICU convention) would prevent the use of default parameter values. Instead, such methods set the UnicodeSet into a "bogus" state (see isBogus()) if an error occurs.

Author: Alan Liu

Stable:: ICU 2.0

Definition at line 285 of file uniset.h.

Member Enumeration Documentation

◆ anonymous enum

anonymous enum

Enumerator

MIN_VALUE

Minimum value that can be stored in a UnicodeSet.

Stable:: ICU 2.4

MAX_VALUE

Maximum value that can be stored in a UnicodeSet.

Stable:: ICU 2.4

Definition at line 358 of file uniset.h.

◆ ESerialization

enum icu::UnicodeSet::ESerialization

Internal:: Do not use. This API is for internal use only.

Definition at line 398 of file uniset.h.

Constructor & Destructor Documentation

◆ UnicodeSet() [1/7]

icu::UnicodeSet::UnicodeSet ( )

Constructs an empty set.

Stable:: ICU 2.0

◆ UnicodeSet() [2/7]

icu::UnicodeSet::UnicodeSet	(	UChar32	start,
		UChar32	end
	)

Constructs a set containing the given range.

If end < start then an empty set is created.

Parameters

start	first character, inclusive, of range
end	last character, inclusive, of range

Stable:: ICU 2.4

◆ UnicodeSet() [3/7]

icu::UnicodeSet::UnicodeSet	(	const uint16_t	buffer[],
		int32_t	bufferLen,
		ESerialization	serialization,
		UErrorCode &	status
	)

Constructs a set from the output of serialize().

Parameters

buffer	the 16 bit array
bufferLen	the original length returned from serialize()
serialization	the value 'kSerialized'
status	error code

Internal:: Do not use. This API is for internal use only.

◆ UnicodeSet() [4/7]

icu::UnicodeSet::UnicodeSet	(	const UnicodeString &	pattern,
		UErrorCode &	status
	)

Constructs a set from the given pattern.

See the class description for the syntax of the pattern language.

Parameters

pattern	a string specifying what characters are in the set
status	returns `U_ILLEGAL_ARGUMENT_ERROR` if the pattern contains a syntax error.

Stable:: ICU 2.0

◆ UnicodeSet() [5/7]

icu::UnicodeSet::UnicodeSet	(	const UnicodeString &	pattern,
		uint32_t	options,
		const SymbolTable *	symbols,
		UErrorCode &	status
	)

Constructs a set from the given pattern.

See the class description for the syntax of the pattern language.

Parameters

pattern	a string specifying what characters are in the set
options	bitmask for options to apply to the pattern. Valid options are USET_IGNORE_SPACE and USET_CASE_INSENSITIVE.
symbols	a symbol table mapping variable names to values and stand-in characters to UnicodeSets; may be NULL
status	returns `U_ILLEGAL_ARGUMENT_ERROR` if the pattern contains a syntax error.

Internal:: Do not use. This API is for internal use only.

◆ UnicodeSet() [6/7]

icu::UnicodeSet::UnicodeSet	(	const UnicodeString &	pattern,
		ParsePosition &	pos,
		uint32_t	options,
		const SymbolTable *	symbols,
		UErrorCode &	status
	)

Constructs a set from the given pattern.

See the class description for the syntax of the pattern language.

Parameters

pattern	a string specifying what characters are in the set
pos	on input, the position in pattern at which to start parsing. On output, the position after the last character parsed.
options	bitmask for options to apply to the pattern. Valid options are USET_IGNORE_SPACE and USET_CASE_INSENSITIVE.
symbols	a symbol table mapping variable names to values and stand-in characters to UnicodeSets; may be NULL
status	input-output error code

Stable:: ICU 2.8

◆ UnicodeSet() [7/7]

icu::UnicodeSet::UnicodeSet ( const UnicodeSet & o )

Constructs a set that is identical to the given UnicodeSet.

Stable:: ICU 2.0

◆ ~UnicodeSet()

virtual icu::UnicodeSet::~UnicodeSet ( )

virtual

Destructs the set.

Stable:: ICU 2.0

Member Function Documentation

◆ add() [1/3]

UnicodeSet & icu::UnicodeSet::add ( const UnicodeString & s )

Adds the specified multicharacter to this set if it is not already present.

If this set already contains the multicharacter, the call leaves this set unchanged. Thus "ch" => {"ch"} A frozen set will not be modified.

Parameters

s	the source string

Returns: this object, for chaining

Stable:: ICU 2.4

◆ add() [2/3]

UnicodeSet & icu::UnicodeSet::add ( UChar32 c )

Adds the specified character to this set if it is not already present.

If this set already contains the specified character, the call leaves this set unchanged. A frozen set will not be modified.

Parameters

c	the character (code point)

Returns: this object, for chaining

Stable:: ICU 2.0

◆ add() [3/3]

virtual UnicodeSet & icu::UnicodeSet::add	(	UChar32	start,
		UChar32	end
	)

virtual

Adds the specified range to this set if it is not already present.

If this set already contains the specified range, the call leaves this set unchanged. If start > end then an empty range is added, leaving the set unchanged. This is equivalent to a boolean logic OR, or a set UNION. A frozen set will not be modified.

Parameters

start	first character, inclusive, of range to be added to this set.
end	last character, inclusive, of range to be added to this set.

Stable:: ICU 2.0

◆ addAll() [1/2]

virtual UnicodeSet & icu::UnicodeSet::addAll ( const UnicodeSet & c )

virtual

Adds all of the elements in the specified set to this set if they're not already present.

This operation effectively modifies this set so that its value is the union of the two sets. The behavior of this operation is unspecified if the specified collection is modified while the operation is in progress. A frozen set will not be modified.

Parameters

c	set whose elements are to be added to this set.

See also: add(UChar32, UChar32)

Stable:: ICU 2.0

◆ addAll() [2/2]

UnicodeSet & icu::UnicodeSet::addAll ( const UnicodeString & s )

Adds each of the characters in this string to the set.

Note: "ch" => {"c", "h"} If this set already contains any particular character, it has no effect on that character. A frozen set will not be modified.

Parameters

s	the source string

Returns: this object, for chaining

Stable:: ICU 2.4

◆ addMatchSetTo()

virtual void icu::UnicodeSet::addMatchSetTo ( UnicodeSet & toUnionTo ) const

overridevirtual

Implementation of UnicodeMatcher API.

Union the set of all characters that may be matched by this object into the given set.

Parameters

toUnionTo the set into which to union the source characters

Stable:: ICU 2.4

Implements icu::UnicodeMatcher.

◆ applyIntPropertyValue()

UnicodeSet & icu::UnicodeSet::applyIntPropertyValue	(	UProperty	prop,
		int32_t	value,
		UErrorCode &	ec
	)

Modifies this set to contain those code points which have the given value for the given binary or enumerated property, as returned by u_getIntPropertyValue.

Prior contents of this set are lost. A frozen set will not be modified.

Parameters

prop	a property in the range UCHAR_BIN_START..UCHAR_BIN_LIMIT-1 or UCHAR_INT_START..UCHAR_INT_LIMIT-1 or UCHAR_MASK_START..UCHAR_MASK_LIMIT-1.
value	a value in the range u_getIntPropertyMinValue(prop).. u_getIntPropertyMaxValue(prop), with one exception. If prop is UCHAR_GENERAL_CATEGORY_MASK, then value should not be a UCharCategory, but rather a mask value produced by U_GET_GC_MASK(). This allows grouped categories such as [:L:] to be represented.
ec	error code input/output parameter

Returns: a reference to this set

Stable:: ICU 2.4

◆ applyPattern() [1/3]

UnicodeSet & icu::UnicodeSet::applyPattern	(	const UnicodeString &	pattern,
		ParsePosition &	pos,
		uint32_t	options,
		const SymbolTable *	symbols,
		UErrorCode &	status
	)

Parses the given pattern, starting at the given position.

The character at pattern.charAt(pos.getIndex()) must be '[', or the parse fails. Parsing continues until the corresponding closing ']'. If a syntax error is encountered between the opening and closing brace, the parse fails. Upon return from a successful parse, the ParsePosition is updated to point to the character following the closing ']', and a StringBuffer containing a pairs list for the parsed pattern is returned. This method calls itself recursively to parse embedded subpatterns. Empties the set passed before applying the pattern. A frozen set will not be modified.

Parameters

pattern	the string containing the pattern to be parsed. The portion of the string from pos.getIndex(), which must be a '[', to the corresponding closing ']', is parsed.
pos	upon entry, the position at which to being parsing. The character at pattern.charAt(pos.getIndex()) must be a '['. Upon return from a successful parse, pos.getIndex() is either the character after the closing ']' of the parsed pattern, or pattern.length() if the closing ']' is the last character of the pattern string.
options	bitmask for options to apply to the pattern. Valid options are USET_IGNORE_SPACE and USET_CASE_INSENSITIVE.
symbols	a symbol table mapping variable names to values and stand-ins to UnicodeSets; may be NULL
status	returns `U_ILLEGAL_ARGUMENT_ERROR` if the pattern contains a syntax error.

Returns: a reference to this

Stable:: ICU 2.8

◆ applyPattern() [2/3]

UnicodeSet & icu::UnicodeSet::applyPattern	(	const UnicodeString &	pattern,
		UErrorCode &	status
	)

Modifies this set to represent the set specified by the given pattern, ignoring Unicode Pattern_White_Space characters.

See the class description for the syntax of the pattern language. A frozen set will not be modified.

Parameters

pattern	a string specifying what characters are in the set
status	returns `U_ILLEGAL_ARGUMENT_ERROR` if the pattern contains a syntax error. Empties the set passed before applying the pattern.

Returns: a reference to this

Stable:: ICU 2.0

◆ applyPattern() [3/3]

UnicodeSet & icu::UnicodeSet::applyPattern	(	const UnicodeString &	pattern,
		uint32_t	options,
		const SymbolTable *	symbols,
		UErrorCode &	status
	)

Modifies this set to represent the set specified by the given pattern, optionally ignoring Unicode Pattern_White_Space characters.

See the class description for the syntax of the pattern language. A frozen set will not be modified.

Parameters

pattern	a string specifying what characters are in the set
options	bitmask for options to apply to the pattern. Valid options are USET_IGNORE_SPACE and USET_CASE_INSENSITIVE.
symbols	a symbol table mapping variable names to values and stand-ins to UnicodeSets; may be NULL
status	returns `U_ILLEGAL_ARGUMENT_ERROR` if the pattern contains a syntax error. Empties the set passed before applying the pattern.

Returns: a reference to this

Internal:: Do not use. This API is for internal use only.

◆ applyPropertyAlias()

UnicodeSet & icu::UnicodeSet::applyPropertyAlias	(	const UnicodeString &	prop,
		const UnicodeString &	value,
		UErrorCode &	ec
	)

Modifies this set to contain those code points which have the given value for the given property.

Prior contents of this set are lost. A frozen set will not be modified.

Parameters

prop a property alias, either short or long. The name is matched loosely. See PropertyAliases.txt for names and a description of loose matching. If the value string is empty, then this string is interpreted as either a General_Category value alias, a Script value alias, a binary property alias, or a special ID. Special IDs are matched loosely and correspond to the following sets:

"ANY" = [\u0000-\U0010FFFF], "ASCII" = [\u0000-\u007F], "Assigned" = [:^Cn:].

Parameters

value	a value alias, either short or long. The name is matched loosely. See PropertyValueAliases.txt for names and a description of loose matching. In addition to aliases listed, numeric values and canonical combining classes may be expressed numerically, e.g., ("nv", "0.5") or ("ccc", "220"). The value string may also be empty.
ec	error code input/output parameter

Returns: a reference to this set

Stable:: ICU 2.4

◆ charAt()

UChar32 icu::UnicodeSet::charAt ( int32_t index ) const

Returns the character at the given index within this set, where the set is ordered by ascending code point.

If the index is out of range for characters, returns (UChar32)-1. The inverse of this method is indexOf().

For iteration, this is slower than UnicodeSetIterator or getRangeCount()/getRangeStart()/getRangeEnd(), because for each call it skips linearly over index characters in the ranges.

Parameters

index an index from 0..size()-1

Returns: the character at the given index, or (UChar32)-1.

Stable:: ICU 2.4

◆ clear()

virtual UnicodeSet & icu::UnicodeSet::clear ( void )

virtual

Removes all of the elements from this set.

This set will be empty after this call returns. A frozen set will not be modified.

Stable:: ICU 2.0

◆ clone()

virtual UnicodeSet * icu::UnicodeSet::clone ( ) const

overridevirtual

Returns a copy of this object.

All UnicodeFunctor objects have to support cloning in order to allow classes using UnicodeFunctors, such as Transliterator, to implement cloning. If this set is frozen, then the clone will be frozen as well. Use cloneAsThawed() for a mutable clone of a frozen set.

See also: cloneAsThawed

Stable:: ICU 2.0

Implements icu::UnicodeFilter.

◆ cloneAsThawed()

UnicodeSet * icu::UnicodeSet::cloneAsThawed ( ) const

Clone the set and make the clone mutable.

See the ICU4J Freezable interface for details.

Returns: the mutable clone

See also: freeze; isFrozen

Stable:: ICU 3.8

◆ closeOver()

UnicodeSet & icu::UnicodeSet::closeOver ( int32_t attribute )

Close this set over the given attribute.

For the attribute USET_CASE, the result is to modify this set so that:

For each character or string 'a' in this set, all strings or characters 'b' such that foldCase(a) == foldCase(b) are added to this set.
For each string 'e' in the resulting set, if e != foldCase(e), 'e' will be removed.

Example: [aq\u00DF{Bc}{bC}{Fi}] => [aAqQ\u00DF\uFB01{ss}{bc}{fi}]

(Here foldCase(x) refers to the operation u_strFoldCase, and a == b denotes that the contents are the same, not pointer comparison.)

A frozen set will not be modified.

Parameters

attribute bitmask for attributes to close over. Currently only the USET_CASE bit is supported. Any undefined bits are ignored.

Returns: a reference to this set.

Stable:: ICU 4.2

◆ compact()

virtual UnicodeSet & icu::UnicodeSet::compact ( )

virtual

Reallocate this objects internal structures to take up the least possible space, without changing this object's value.

A frozen set will not be modified.

Stable:: ICU 2.4

◆ complement() [1/4]

virtual UnicodeSet & icu::UnicodeSet::complement ( )

virtual

This is equivalent to complement(MIN_VALUE, MAX_VALUE).

Note: This performs a symmetric difference with all code points and thus retains all multicharacter strings. In order to achieve a “code point complement” (all code points minus this set), the easiest is to .complement().removeAllStrings().

A frozen set will not be modified.

Stable:: ICU 2.0

◆ complement() [2/4]

UnicodeSet & icu::UnicodeSet::complement ( const UnicodeString & s )

Complement the specified string in this set.

The string will be removed if it is in this set, or will be added if it is not in this set. A frozen set will not be modified.

Parameters

s	the string to complement

Returns: this object, for chaining

Stable:: ICU 2.4

◆ complement() [3/4]

UnicodeSet & icu::UnicodeSet::complement ( UChar32 c )

Complements the specified character in this set.

The character will be removed if it is in this set, or will be added if it is not in this set. A frozen set will not be modified.

Parameters

c	the character (code point)

Returns: this object, for chaining

Stable:: ICU 2.0

◆ complement() [4/4]

virtual UnicodeSet & icu::UnicodeSet::complement	(	UChar32	start,
		UChar32	end
	)

virtual

Complements the specified range in this set.

Any character in the range will be removed if it is in this set, or will be added if it is not in this set. If start > end then an empty range is complemented, leaving the set unchanged. This is equivalent to a boolean logic XOR. A frozen set will not be modified.

Parameters

start	first character, inclusive, of range
end	last character, inclusive, of range

Stable:: ICU 2.0

◆ complementAll() [1/2]

virtual UnicodeSet & icu::UnicodeSet::complementAll ( const UnicodeSet & c )

virtual

Complements in this set all elements contained in the specified set.

Any character in the other set will be removed if it is in this set, or will be added if it is not in this set. A frozen set will not be modified.

Parameters

c	set that defines which elements will be xor'ed from this set.

Stable:: ICU 2.4

◆ complementAll() [2/2]

UnicodeSet & icu::UnicodeSet::complementAll ( const UnicodeString & s )

Complement EACH of the characters in this string.

Note: "ch" == {"c", "h"} A frozen set will not be modified.

Parameters

s	the source string

Returns: this object, for chaining

Stable:: ICU 2.4

◆ contains() [1/3]

UBool icu::UnicodeSet::contains ( const UnicodeString & s ) const

Returns true if this set contains the given multicharacter string.

Parameters

s	string to be checked for containment

Returns: true if this set contains the specified string

Stable:: ICU 2.4

◆ contains() [2/3]

virtual UBool icu::UnicodeSet::contains ( UChar32 c ) const

overridevirtual

Returns true if this set contains the given character.

This function works faster with a frozen set.

Parameters

c	character to be checked for containment

Returns: true if the test condition is met

Stable:: ICU 2.0

Implements icu::UnicodeFilter.

◆ contains() [3/3]

virtual UBool icu::UnicodeSet::contains	(	UChar32	start,
		UChar32	end
	)		const

virtual

Returns true if this set contains every character of the given range.

Parameters

start	first character, inclusive, of the range
end	last character, inclusive, of the range

Returns: true if the test condition is met

Stable:: ICU 2.0

◆ containsAll() [1/2]

virtual UBool icu::UnicodeSet::containsAll ( const UnicodeSet & c ) const

virtual

Returns true if this set contains all the characters and strings of the given set.

Parameters

c	set to be checked for containment

Returns: true if the test condition is met

Stable:: ICU 2.4

◆ containsAll() [2/2]

UBool icu::UnicodeSet::containsAll ( const UnicodeString & s ) const

Returns true if this set contains all the characters of the given string.

Parameters

s	string containing characters to be checked for containment

Returns: true if the test condition is met

Stable:: ICU 2.4

◆ containsNone() [1/3]

UBool icu::UnicodeSet::containsNone ( const UnicodeSet & c ) const

Returns true if this set contains none of the characters and strings of the given set.

Parameters

c	set to be checked for containment

Returns: true if the test condition is met

Stable:: ICU 2.4

◆ containsNone() [2/3]

UBool icu::UnicodeSet::containsNone ( const UnicodeString & s ) const

Returns true if this set contains none of the characters of the given string.

Parameters

s	string containing characters to be checked for containment

Returns: true if the test condition is met

Stable:: ICU 2.4

◆ containsNone() [3/3]

UBool icu::UnicodeSet::containsNone	(	UChar32	start,
		UChar32	end
	)		const

Returns true if this set contains none of the characters of the given range.

Parameters

start	first character, inclusive, of the range
end	last character, inclusive, of the range

Returns: true if the test condition is met

Stable:: ICU 2.4

◆ containsSome() [1/3]

UBool icu::UnicodeSet::containsSome ( const UnicodeSet & s ) const

inline

Returns true if this set contains one or more of the characters and strings of the given set.

Parameters

s	The set to be checked for containment

Returns: true if the condition is met

Stable:: ICU 2.4

Definition at line 1728 of file uniset.h.

◆ containsSome() [2/3]

UBool icu::UnicodeSet::containsSome ( const UnicodeString & s ) const

inline

Returns true if this set contains one or more of the characters of the given string.

Parameters

s	string containing characters to be checked for containment

Returns: true if the condition is met

Stable:: ICU 2.4

Definition at line 1732 of file uniset.h.

◆ containsSome() [3/3]

UBool icu::UnicodeSet::containsSome	(	UChar32	start,
		UChar32	end
	)		const

inline

Returns true if this set contains one or more of the characters in the given range.

Parameters

start	first character, inclusive, of the range
end	last character, inclusive, of the range

Returns: true if the condition is met

Stable:: ICU 2.4

Definition at line 1724 of file uniset.h.

◆ createFrom()

static UnicodeSet * icu::UnicodeSet::createFrom ( const UnicodeString & s )

static

Makes a set from a multicharacter string.

Thus "ch" => {"ch"}

Parameters

s	the source string

Returns: a newly created set containing the given string. The caller owns the return object and is responsible for deleting it.

Stable:: ICU 2.4

◆ createFromAll()

static UnicodeSet * icu::UnicodeSet::createFromAll ( const UnicodeString & s )

static

Makes a set from each of the characters in the string.

Thus "ch" => {"c", "h"}

Parameters

s	the source string

Returns: a newly created set containing the given characters The caller owns the return object and is responsible for deleting it.

Stable:: ICU 2.4

◆ freeze()

UnicodeSet * icu::UnicodeSet::freeze ( )

Freeze the set (make it immutable).

Once frozen, it cannot be unfrozen and is therefore thread-safe until it is deleted. See the ICU4J Freezable interface for details. Freezing the set may also make some operations faster, for example contains() and span(). A frozen set will not be modified. (It remains frozen.)

Returns: this set.

See also: isFrozen; cloneAsThawed

Stable:: ICU 3.8

◆ fromUSet() [1/2]

const UnicodeSet * icu::UnicodeSet::fromUSet ( const USet * uset )

inlinestatic

Get a UnicodeSet pointer from a const USet.

Parameters

uset	a const USet (the ICU plain C type for UnicodeSet)

Returns: the corresponding UnicodeSet pointer.

Stable:: ICU 4.2

Definition at line 1744 of file uniset.h.

◆ fromUSet() [2/2]

UnicodeSet * icu::UnicodeSet::fromUSet ( USet * uset )

inlinestatic

Get a UnicodeSet pointer from a USet.

Parameters

uset	a USet (the ICU plain C type for UnicodeSet)

Returns: the corresponding UnicodeSet pointer.

Stable:: ICU 4.2

Definition at line 1740 of file uniset.h.

◆ getDynamicClassID()

virtual UClassID icu::UnicodeSet::getDynamicClassID ( void ) const

overridevirtual

Implement UnicodeFunctor API.

Returns: The class ID for this object. All objects of a given class have the same class ID. Objects of other classes have different class IDs.

Stable:: ICU 2.4

Implements icu::UnicodeFunctor.

◆ getRangeCount()

virtual int32_t icu::UnicodeSet::getRangeCount ( void ) const

virtual

Iteration method that returns the number of ranges contained in this set.

See also: getRangeStart; getRangeEnd

Stable:: ICU 2.4

◆ getRangeEnd()

virtual UChar32 icu::UnicodeSet::getRangeEnd ( int32_t index ) const

virtual

Iteration method that returns the last character in the specified range of this set.

See also: getRangeStart; getRangeEnd

Stable:: ICU 2.4

◆ getRangeStart()

virtual UChar32 icu::UnicodeSet::getRangeStart ( int32_t index ) const

virtual

Iteration method that returns the first character in the specified range of this set.

See also: getRangeCount; getRangeEnd

Stable:: ICU 2.4

◆ getStaticClassID()

static UClassID icu::UnicodeSet::getStaticClassID ( void )

static

Return the class ID for this class.

This is useful only for comparing to a return value from getDynamicClassID(). For example:

.      Base* polymorphic_pointer = createPolymorphicObject();
.      if (polymorphic_pointer->getDynamicClassID() ==
.          Derived::getStaticClassID()) ...

Returns: The class ID for all objects of this class.

Stable:: ICU 2.0

◆ hashCode()

virtual int32_t icu::UnicodeSet::hashCode ( void ) const

virtual

Returns the hash code value for this set.

Returns: the hash code value for this set.

See also: Object::hashCode()

Stable:: ICU 2.0

◆ hasStrings()

UBool icu::UnicodeSet::hasStrings ( ) const

Returns: true if this set contains multi-character strings or the empty string.

Stable:: ICU 70

◆ indexOf()

int32_t icu::UnicodeSet::indexOf ( UChar32 c ) const

Returns the index of the given character within this set, where the set is ordered by ascending code point.

If the character is not in this set, return -1. The inverse of this method is charAt().

Returns: an index from 0..size()-1, or -1

Stable:: ICU 2.4

◆ isBogus()

UBool icu::UnicodeSet::isBogus ( void ) const

inline

Determine if this object contains a valid set.

A bogus set has no value. It is different from an empty set. It can be used to indicate that no set value is available.

Returns: true if the set is bogus/invalid, false otherwise

See also: setToBogus()

Stable:: ICU 4.0

Definition at line 1736 of file uniset.h.

◆ isEmpty()

virtual UBool icu::UnicodeSet::isEmpty ( void ) const

virtual

Returns true if this set contains no elements.

Returns: true if this set contains no elements.

Stable:: ICU 2.0

◆ isFrozen()

UBool icu::UnicodeSet::isFrozen ( ) const

inline

Determines whether the set has been frozen (made immutable) or not.

See the ICU4J Freezable interface for details.

Returns: true/false for whether the set has been frozen

See also: freeze; cloneAsThawed

Stable:: ICU 3.8

Definition at line 1720 of file uniset.h.

References NULL.

◆ matches()

virtual UMatchDegree icu::UnicodeSet::matches	(	const Replaceable &	text,
		int32_t &	offset,
		int32_t	limit,
		UBool	incremental
	)

overridevirtual

Implement UnicodeMatcher::matches()

Stable:: ICU 2.4

Reimplemented from icu::UnicodeFilter.

◆ operator!=()

bool icu::UnicodeSet::operator!= ( const UnicodeSet & o ) const

inline

Compares the specified object with this set for equality.

Returns true if the specified set is not equal to this set.

Stable:: ICU 2.0

Definition at line 1716 of file uniset.h.

References icu::operator==().

◆ operator=()

UnicodeSet & icu::UnicodeSet::operator= ( const UnicodeSet & o )

Assigns this object to be a copy of another.

A frozen set will not be modified.

Stable:: ICU 2.0

◆ operator==()

virtual bool icu::UnicodeSet::operator== ( const UnicodeSet & o ) const

virtual

Compares the specified object with this set for equality.

Returns true if the two sets have the same size, and every member of the specified set is contained in this set (or equivalently, every member of this set is contained in the specified set).

Parameters

o	set to be compared for equality with this set.

Returns: true if the specified set is equal to this set.

Stable:: ICU 2.0

◆ remove() [1/3]

UnicodeSet & icu::UnicodeSet::remove ( const UnicodeString & s )

Removes the specified string from this set if it is present.

The set will not contain the specified character once the call returns. A frozen set will not be modified.

Parameters

s	the source string

Returns: this object, for chaining

Stable:: ICU 2.4

◆ remove() [2/3]

UnicodeSet & icu::UnicodeSet::remove ( UChar32 c )

Removes the specified character from this set if it is present.

The set will not contain the specified range once the call returns. A frozen set will not be modified.

Parameters

c	the character (code point)

Returns: this object, for chaining

Stable:: ICU 2.0

◆ remove() [3/3]

virtual UnicodeSet & icu::UnicodeSet::remove	(	UChar32	start,
		UChar32	end
	)

virtual

Removes the specified range from this set if it is present.

The set will not contain the specified range once the call returns. If start > end then an empty range is removed, leaving the set unchanged. A frozen set will not be modified.

Parameters

start	first character, inclusive, of range to be removed from this set.
end	last character, inclusive, of range to be removed from this set.

Stable:: ICU 2.0

◆ removeAll() [1/2]

virtual UnicodeSet & icu::UnicodeSet::removeAll ( const UnicodeSet & c )

virtual

Removes from this set all of its elements that are contained in the specified set.

This operation effectively modifies this set so that its value is the asymmetric set difference of the two sets. A frozen set will not be modified.

Parameters

c	set that defines which elements will be removed from this set.

Stable:: ICU 2.0

◆ removeAll() [2/2]

UnicodeSet & icu::UnicodeSet::removeAll ( const UnicodeString & s )

Remove EACH of the characters in this string.

Note: "ch" == {"c", "h"} A frozen set will not be modified.

Parameters

s	the source string

Returns: this object, for chaining

Stable:: ICU 2.4

◆ removeAllStrings()

virtual UnicodeSet & icu::UnicodeSet::removeAllStrings ( )

virtual

Remove all strings from this set.

Returns: a reference to this set.

Stable:: ICU 4.2

◆ resemblesPattern()

static UBool icu::UnicodeSet::resemblesPattern	(	const UnicodeString &	pattern,
		int32_t	pos
	)

static

Return true if the given position, in the given pattern, appears to be the start of a UnicodeSet pattern.

Stable:: ICU 2.4

◆ retain() [1/3]

UnicodeSet & icu::UnicodeSet::retain ( const UnicodeString & s )

Retains only the specified string from this set if it is present.

Upon return this set will be empty if it did not contain s, or will only contain s if it did contain s. A frozen set will not be modified.

Parameters

s	the source string

Returns: this object, for chaining

Stable:: ICU 69

◆ retain() [2/3]

UnicodeSet & icu::UnicodeSet::retain ( UChar32 c )

Retain the specified character from this set if it is present.

A frozen set will not be modified.

Parameters

c	the character (code point)

Returns: this object, for chaining

Stable:: ICU 2.0

◆ retain() [3/3]

virtual UnicodeSet & icu::UnicodeSet::retain	(	UChar32	start,
		UChar32	end
	)

virtual

Retain only the elements in this set that are contained in the specified range.

If start > end then an empty range is retained, leaving the set empty. This is equivalent to a boolean logic AND, or a set INTERSECTION. A frozen set will not be modified.

Parameters

start	first character, inclusive, of range
end	last character, inclusive, of range

Stable:: ICU 2.0

◆ retainAll() [1/2]

virtual UnicodeSet & icu::UnicodeSet::retainAll ( const UnicodeSet & c )

virtual

Retains only the elements in this set that are contained in the specified set.

In other words, removes from this set all of its elements that are not contained in the specified set. This operation effectively modifies this set so that its value is the intersection of the two sets. A frozen set will not be modified.

Parameters

c	set that defines which elements this set will retain.

Stable:: ICU 2.0

◆ retainAll() [2/2]

UnicodeSet & icu::UnicodeSet::retainAll ( const UnicodeString & s )

Retains EACH of the characters in this string.

Note: "ch" == {"c", "h"} A frozen set will not be modified.

Parameters

s	the source string

Returns: this object, for chaining

Stable:: ICU 2.4

◆ serialize()

int32_t icu::UnicodeSet::serialize	(	uint16_t *	dest,
		int32_t	destCapacity,
		UErrorCode &	ec
	)		const

Serializes this set into an array of 16-bit integers.

Serialization (currently) only records the characters in the set; multicharacter strings are ignored.

The array has following format (each line is one 16-bit integer):

length = (n+2*m) | (m!=0?0x8000:0) bmpLength = n; present if m!=0 bmp[0] bmp[1] ... bmp[n-1] supp-high[0] supp-low[0] supp-high[1] supp-low[1] ... supp-high[m-1] supp-low[m-1]

The array starts with a header. After the header are n bmp code points, then m supplementary code points. Either n or m or both may be zero. n+2*m is always <= 0x7FFF.

If there are no supplementary characters (if m==0) then the header is one 16-bit integer, 'length', with value n.

If there are supplementary characters (if m!=0) then the header is two 16-bit integers. The first, 'length', has value (n+2*m)|0x8000. The second, 'bmpLength', has value n.

After the header the code points are stored in ascending order. Supplementary code points are stored as most significant 16 bits followed by least significant 16 bits.

Parameters

dest	pointer to buffer of destCapacity 16-bit integers. May be NULL only if destCapacity is zero.
destCapacity	size of dest, or zero. Must not be negative.
ec	error code. Will be set to U_INDEX_OUTOFBOUNDS_ERROR if n+2m > 0x7FFF. Will be set to U_BUFFER_OVERFLOW_ERROR if n+2m+(m!=0?2:1) > destCapacity.

Returns: the total length of the serialized format, including the header, that is, n+2*m+(m!=0?2:1), or 0 on error other than U_BUFFER_OVERFLOW_ERROR.

Stable:: ICU 2.4

◆ set()

UnicodeSet & icu::UnicodeSet::set	(	UChar32	start,
		UChar32	end
	)

Make this object represent the range start - end.

If start > end then this object is set to an empty range. A frozen set will not be modified.

Parameters

start	first character in the set, inclusive
end	last character in the set, inclusive

Stable:: ICU 2.4

◆ setToBogus()

void icu::UnicodeSet::setToBogus ( )

Make this UnicodeSet object invalid.

The string will test true with isBogus().

A bogus set has no value. It is different from an empty set. It can be used to indicate that no set value is available.

This utility function is used throughout the UnicodeSet implementation to indicate that a UnicodeSet operation failed, and may be used in other functions, especially but not exclusively when such functions do not take a UErrorCode for simplicity.

See also: isBogus()

Stable:: ICU 4.0

◆ size()

virtual int32_t icu::UnicodeSet::size ( void ) const

virtual

Returns the number of elements in this set (its cardinality).

Note than the elements of a set may include both individual codepoints and strings.

This is slower than getRangeCount() because it counts the code points of all ranges.

Returns: the number of elements in this set (its cardinality).

Stable:: ICU 2.0

See also: getRangeCount

◆ span() [1/2]

int32_t icu::UnicodeSet::span	(	const char16_t *	s,
		int32_t	length,
		USetSpanCondition	spanCondition
	)		const

Returns the length of the initial substring of the input string which consists only of characters and strings that are contained in this set (USET_SPAN_CONTAINED, USET_SPAN_SIMPLE), or only of characters and strings that are not contained in this set (USET_SPAN_NOT_CONTAINED).

See USetSpanCondition for details. Similar to the strspn() C library function. Unpaired surrogates are treated according to contains() of their surrogate code points. This function works faster with a frozen set and with a non-negative string length argument.

Parameters

s	start of the string
length	of the string; can be -1 for NUL-terminated
spanCondition	specifies the containment condition

Returns: the length of the initial substring according to the spanCondition; 0 if the start of the string does not fit the spanCondition

Stable:: ICU 3.8

See also: USetSpanCondition

◆ span() [2/2]

int32_t icu::UnicodeSet::span	(	const UnicodeString &	s,
		int32_t	start,
		USetSpanCondition	spanCondition
	)		const

inline

Returns the end of the substring of the input string according to the USetSpanCondition.

Same as start+span(s.getBuffer()+start, s.length()-start, spanCondition) after pinning start to 0<=start<=s.length().

Parameters

s	the string
start	the start index in the string for the span operation
spanCondition	specifies the containment condition

Returns: the exclusive end of the substring according to the spanCondition; the substring s.tempSubStringBetween(start, end) fulfills the spanCondition

Stable:: ICU 4.4

See also: USetSpanCondition

Definition at line 1756 of file uniset.h.

References icu::UnicodeString::getBuffer(), and icu::UnicodeString::length().

◆ spanBack() [1/2]

int32_t icu::UnicodeSet::spanBack	(	const char16_t *	s,
		int32_t	length,
		USetSpanCondition	spanCondition
	)		const

Returns the start of the trailing substring of the input string which consists only of characters and strings that are contained in this set (USET_SPAN_CONTAINED, USET_SPAN_SIMPLE), or only of characters and strings that are not contained in this set (USET_SPAN_NOT_CONTAINED).

See USetSpanCondition for details. Unpaired surrogates are treated according to contains() of their surrogate code points. This function works faster with a frozen set and with a non-negative string length argument.

Parameters

s	start of the string
length	of the string; can be -1 for NUL-terminated
spanCondition	specifies the containment condition

Returns: the start of the trailing substring according to the spanCondition; the string length if the end of the string does not fit the spanCondition

Stable:: ICU 3.8

See also: USetSpanCondition

◆ spanBack() [2/2]

int32_t icu::UnicodeSet::spanBack	(	const UnicodeString &	s,
		int32_t	limit,
		USetSpanCondition	spanCondition
	)		const

inline

Returns the start of the substring of the input string according to the USetSpanCondition.

Same as spanBack(s.getBuffer(), limit, spanCondition) after pinning limit to 0<=end<=s.length().

Parameters

s	the string
limit	the exclusive-end index in the string for the span operation (use s.length() or INT32_MAX for spanning back from the end of the string)
spanCondition	specifies the containment condition

Returns: the start of the substring according to the spanCondition; the substring s.tempSubStringBetween(start, limit) fulfills the spanCondition

Stable:: ICU 4.4

See also: USetSpanCondition

Definition at line 1766 of file uniset.h.

References icu::UnicodeString::getBuffer(), and icu::UnicodeString::length().

◆ spanBackUTF8()

int32_t icu::UnicodeSet::spanBackUTF8	(	const char *	s,
		int32_t	length,
		USetSpanCondition	spanCondition
	)		const

Returns the start of the trailing substring of the input string which consists only of characters and strings that are contained in this set (USET_SPAN_CONTAINED, USET_SPAN_SIMPLE), or only of characters and strings that are not contained in this set (USET_SPAN_NOT_CONTAINED).

See USetSpanCondition for details. Malformed byte sequences are treated according to contains(0xfffd). This function works faster with a frozen set and with a non-negative string length argument.

Parameters

s	start of the string (UTF-8)
length	of the string; can be -1 for NUL-terminated
spanCondition	specifies the containment condition

Returns: the start of the trailing substring according to the spanCondition; the string length if the end of the string does not fit the spanCondition

Stable:: ICU 3.8

See also: USetSpanCondition

◆ spanUTF8()

int32_t icu::UnicodeSet::spanUTF8	(	const char *	s,
		int32_t	length,
		USetSpanCondition	spanCondition
	)		const

Returns the length of the initial substring of the input string which consists only of characters and strings that are contained in this set (USET_SPAN_CONTAINED, USET_SPAN_SIMPLE), or only of characters and strings that are not contained in this set (USET_SPAN_NOT_CONTAINED).

See USetSpanCondition for details. Similar to the strspn() C library function. Malformed byte sequences are treated according to contains(0xfffd). This function works faster with a frozen set and with a non-negative string length argument.

Parameters

s	start of the string (UTF-8)
length	of the string; can be -1 for NUL-terminated
spanCondition	specifies the containment condition

Returns: the length of the initial substring according to the spanCondition; 0 if the start of the string does not fit the spanCondition

Stable:: ICU 3.8

See also: USetSpanCondition

◆ toPattern()

virtual UnicodeString & icu::UnicodeSet::toPattern	(	UnicodeString &	result,
		UBool	escapeUnprintable = `false`
	)		const

overridevirtual

Returns a string representation of this set.

If the result of calling this function is passed to a UnicodeSet constructor, it will produce another set that is equal to this one. A frozen set will not be modified.

Parameters

result	the string to receive the rules. Previous contents will be deleted.
escapeUnprintable	if true then convert unprintable character to their hex escape representations, \uxxxx or \Uxxxxxxxx. Unprintable characters are those other than U+000A, U+0020..U+007E.

Stable:: ICU 2.0

Implements icu::UnicodeMatcher.

◆ toUSet() [1/2]

USet * icu::UnicodeSet::toUSet ( )

inline

Produce a USet * pointer for this UnicodeSet.

USet is the plain C type for UnicodeSet

Returns: a USet pointer for this UnicodeSet

Stable:: ICU 4.2

Definition at line 1748 of file uniset.h.

◆ toUSet() [2/2]

const USet * icu::UnicodeSet::toUSet ( ) const

inline

Produce a const USet * pointer for this UnicodeSet.

USet is the plain C type for UnicodeSet

Returns: a const USet pointer for this UnicodeSet

Stable:: ICU 4.2

Definition at line 1752 of file uniset.h.

Friends And Related Function Documentation

◆ RBBIRuleScanner

friend class RBBIRuleScanner

friend

Definition at line 1556 of file uniset.h.

◆ UnicodeSetIterator

friend class UnicodeSetIterator

friend

Definition at line 1711 of file uniset.h.

◆ USetAccess

friend class USetAccess

friend

Definition at line 1538 of file uniset.h.

The documentation for this class was generated from the following file:

uniset.h

`[]`	No characters
`[a]`	The character 'a'
`[ae]`	The characters 'a' and 'e'
`[a-e]`	The characters 'a' through 'e' inclusive, in Unicode code point order
`[\u4E01]`	The character U+4E01
`[a{ab}{ac}]`	The character 'a' and the multicharacter strings "ab" and "ac"
`[\p{Lu}]`	All characters in the general category Uppercase Letter

`pattern :=`	`('[' '^'? item* ']') \| property`
`item :=`	`char \| (char '-' char) \| pattern-expr`
`pattern-expr :=`	`pattern \| pattern-expr pattern \| pattern-expr op pattern`
`op :=`	`'&' \| '-'`
`special :=`	`'[' \| ']' \| '-'`
`char :=`	any character that is not`special \| ('\'`any character`) \| ('\u' hex hex hex hex)`
`hex :=`	`'0' \| '1' \| '2' \| '3' \| '4' \| '5' \| '6' \| '7' \| '8' \| '9' \| 'A' \| 'B' \| 'C' \| 'D' \| 'E' \| 'F' \| 'a' \| 'b' \| 'c' \| 'd' \| 'e' \| 'f'`
`property :=`	a Unicode property set pattern

Public Types

Public Member Functions

Static Public Member Functions

Friends

Detailed Description

Member Enumeration Documentation

◆ anonymous enum

◆ ESerialization

Constructor & Destructor Documentation

◆ UnicodeSet() [1/7]

◆ UnicodeSet() [2/7]

◆ UnicodeSet() [3/7]

◆ UnicodeSet() [4/7]

◆ UnicodeSet() [5/7]

◆ UnicodeSet() [6/7]

◆ UnicodeSet() [7/7]

◆ ~UnicodeSet()

Member Function Documentation

◆ add() [1/3]

◆ add() [2/3]

◆ add() [3/3]

◆ addAll() [1/2]

◆ addAll() [2/2]

◆ addMatchSetTo()

◆ applyIntPropertyValue()

◆ applyPattern() [1/3]

◆ applyPattern() [2/3]

◆ applyPattern() [3/3]

◆ applyPropertyAlias()

◆ charAt()

◆ clear()

◆ clone()

◆ cloneAsThawed()

◆ closeOver()

◆ compact()

◆ complement() [1/4]

◆ complement() [2/4]

◆ complement() [3/4]

◆ complement() [4/4]

◆ complementAll() [1/2]

◆ complementAll() [2/2]

◆ contains() [1/3]

◆ contains() [2/3]

◆ contains() [3/3]

◆ containsAll() [1/2]

◆ containsAll() [2/2]

◆ containsNone() [1/3]

◆ containsNone() [2/3]

◆ containsNone() [3/3]

◆ containsSome() [1/3]

◆ containsSome() [2/3]

◆ containsSome() [3/3]

◆ createFrom()

◆ createFromAll()

◆ freeze()

◆ fromUSet() [1/2]

◆ fromUSet() [2/2]

◆ getDynamicClassID()

◆ getRangeCount()

◆ getRangeEnd()

◆ getRangeStart()

◆ getStaticClassID()

◆ hashCode()

◆ hasStrings()

◆ indexOf()

◆ isBogus()

◆ isEmpty()

◆ isFrozen()

◆ matches()

◆ operator!=()

◆ operator=()

◆ operator==()

◆ remove() [1/3]

◆ remove() [2/3]

◆ remove() [3/3]

◆ removeAll() [1/2]

◆ removeAll() [2/2]

◆ removeAllStrings()

◆ resemblesPattern()

◆ retain() [1/3]