Here are a few basic concepts that you'll need to understand for the rest of this section.

A checksum is a method of taking a file and boiling it down to a reasonably short number that uniquely identifies the content of the file. This is a lot harder to do well than it might seem, and the most commonly used type of checksum, the MD5 sum, is in the process of being broken.

Public key cryptography is based on pairs of keys, a public key and a private key. The public key is given out to the world; the private key must be kept a secret. Anyone possessing the public key can encrypt a message so that it can only be read by someone possessing the private key. It's also possible to use a private key to sign a file, not encrypt it. If a private key is used to sign a file, then anyone who has the public key can check that the file was signed by that key. No one who doesn't have the private key can forge such a signature.

These keys are quite long numbers (1024 to 2048 digits or longer), and to make them easier to work with they have a key id, which is a shorter, 8 or 16 digit number that can be used to refer to them.

gpg is the tool used in secure apt to sign files and check their signatures.

apt-key is a program that is used to manage a keyring of gpg keys for secure apt. The keyring is kept in the file /etc/apt/trusted.gpg (not to be confused with the related but not very interesting /etc/apt/trustdb.gpg). apt-key can be used to show the keys in the keyring, and to add or remove a key.

A Debian archive contains a Release file, which is updated each time any of the packages in the archive change. Among other things, the Release file contains some MD5 sums of other files in the archive. An excerpt of an example Release file:

MD5Sum:
 6b05b392f792ba5a436d590c129de21f            3453 Packages
 1356479a23edda7a69f24eb8d6f4a14b            1131 Packages.gz
 2a5167881adc9ad1a8864f281b1eb959            1715 Sources
 88de3533bf6e054d1799f8e49b6aed8b             658 Sources.gz

The Release files also include SHA-1 checksums, which will be useful once MD5 sums become fully broken, however apt doesn't use them yet.

Now if we look inside a Packages file, we'll find more MD5 sums, one for each package listed in it. For example:

    Package: uqm
    Priority: optional
    ...
    Filename: unstable/uqm_0.4.0-1_i386.deb
    Size: 580558
    MD5sum: 864ec6157c1eea88acfef44d0f34d219

These two checksums can be used to verify that you have downloaded a correct copy of the Packages file, with a md5sum that matches the one in the Release file. And when it downloads an individual package, it can also check its md5sum against the content of the Packages file. If apt fails at either of these steps, it will abort.

None of this is new in secure apt, but it does provide the foundation. Notice that so far there is one file that apt doesn't have a way to check: The Release file. Secure apt is all about making apt verify the Release file before it does anything else with it, and plugging this hole, so that there is a chain of verification from the package that you are going to install all the way back to the provider of the package.

To verify the Release file, a gpg signature is added for the Release file. This is put in a file named Release.gpg that is shipped alongside the Release file. It looks something like this ^[50] , although only gpg actually looks at its contents normally:

-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)

iD8DBQBCqKO1nukh8wJbxY8RAsfHAJ9hu8oGNRAl2MSmP5+z2RZb6FJ8kACfWvEx
UBGPVc7jbHHsg78EhMBlV/U=
=x6og
-----END PGP SIGNATURE-----

Secure apt always downloads Release.gpg files when it's downloading Release files, and if it cannot download the Release.gpg, or if the signature is bad, it will complain, and will make note that the Packages files that the Release file points to, and all the packages listed therein, are from an untrusted source. Here's how it looks during an apt-get update:

W: GPG error: http://ftp.us.debian.org testing Release: The following signatures
 couldn't be verified because the public key is not available: NO_PUBKEY 010908312D230C5F

Note that the second half of the long number is the key id of the key that apt doesn't know about, in this case that's 2D230C5F.

If you ignore that warning and try to install a package later, apt will warn again:

WARNING: The following packages cannot be authenticated!
  libglib-perl libgtk2-perl
Install these packages without verification [y/N]?

If you say Y here you have no way to know if the file you're getting is the package you're supposed to install, or if it's something else entirely that somebody that can intercept the communication against the server^[51] has arranged for you, containing a nasty suprise.

Note that you can disable these checks by running apt with --allow-unauthenticated.

It's also worth noting that newer versions of the Debian installer use the same signed Release file mechanism during their debootstrap of the Debian base system, before apt is available, and that the installer even uses this system to verify pieces of itself that it downloads from the net. Also, Debian does not currently sign the Release files on its CDs; apt can be configured to always trust packages from CDs so this is not a large problem.

So the security of the whole system depends on there being a Release.gpg file, which signs a Release file, and of apt checking that signature using gpg. To check the signature, it has to know the public key of the person who signed the file. These keys are kept in apt's own keyring (/etc/apt/trusted.gpg), and managing the keys is where secure apt comes in.

By default, Debian systems come preconfigured with the Debian archive key in the keyring.

# apt-key list
/etc/apt/trusted.gpg
--------------------
pub   1024D/4F368D5D 2005-01-31 [expires: 2006-01-31]
uid                  Debian Archive Automatic Signing Key (2005) <ftpmaster@debian.org>

Here 4F368D5D is the key id, and notice that this key was only valid for a one year period. Debian rotates these keys as a last line of defense against some sort of security breach breaking a key.

That will make apt trust the official Debian archive, but if you add some other apt repository to /etc/apt/sources.list, you'll also have to give apt its key if you want apt to trust it. Once you have the key and have verified it, it's a simple matter of running apt-key add file to add it. Getting the key and verifying it are the trickier parts.

The debian-archive-keyring package is used to distribute keys to apt. Upgrades to this package can add (or remove) gpg keys for the main Debian archive.

For other archives, there is not yet a standard location where you can find the key for a given apt repository. There's a rough standard of putting the key up on the web page for the repository or as a file in the repository itself, but no real standard, so you might have to hunt for it.

The Debian archive signing key is available at http://ftp-master.debian.org/ziyi_key_2006.asc (replace 2006 with current year).^[52]

gpg itself has a standard way to distribute keys, using a keyserver that gpg can download a key from and add it to its keyring. For example:

$ gpg --keyserver pgpkeys.mit.edu --recv-key 2D230C5F
gpg: requesting key 2D230C5F from hkp server pgpkeys.mit.edu
gpg: key 2D230C5F: public key "Debian Archive Automatic Signing Key (2006) <ftpm
aster@debian.org>" imported
gpg: Total number processed: 1
gpg:               imported: 1

You can then export that key from your own keyring and feed it to apt-key:

$ gpg -a --export 2D230C5F | sudo apt-key add -
gpg: no ultimately trusted keys found
OK

The "gpg: no ultimately trusted keys found" warning means that gpg was not configured to ultimately trust a specific key. Trust settings are part of OpenPGPs Web-of-Trust which does not apply here. So there is no problem with this warning. In typical setups the user's own key is ultimately trusted.

By adding a key to apt's keyring, you're telling apt to trust everything signed by the key, and this lets you know for sure that apt won't install anything not signed by the person who possesses the private key. But if you're sufficiently paranoid, you can see that this just pushes things up a level, now instead of having to worry if a package, or a Release file is valid, you can worry about whether you've actually gotten the right key. Is the http://ftp-master.debian.org/ziyi_key_2006.asc file mentioned above really Debian's archive signing key, or has it been modified (or this document lies).

It's good to be paranoid in security, but verifying things from here is harder. gpg has the concept of a chain of trust, which can start at someone you're sure of, who signs someone's key, who signs some other key, etc., until you get to the archive key. If you're sufficiently paranoid you'll want to check that your archive key is signed by a key that you can trust, with a trust chain that goes back to someone you know personally. If you want to do this, visit a Debian conference or perhaps a local LUG for a key signing ^[53].

If you can't afford this level of paranoia, do whatever feels appropriate to you when adding a new apt source and a new key. Maybe you'll want to mail the person providing the key and verify it, or maybe you're willing to take your chances with downloading it and assuming you got the real thing. The important thing is that by reducing the problem to what archive keys to trust, secure apt lets you be as careful and secure as it suits you to be.

You can verify the fingerprint as well as the signatures on the key. Retrieving the fingerprint can be done for multiple sources, you can check http://debiansystem.info/readers/changes/547-ziyi-key-2006, talk to Debian Developers on IRC, read the mailing list where the key change will be announced or any other additional means to verify the fingerprint. For example you can do this:

$ GET http://ftp-master.debian.org/ziyi_key_2006.asc | gpg --import
gpg: key 2D230C5F: public key "Debian Archive Automatic Signing Key (2006)
  <ftpmaster&debian.org>" imported
gpg: Total number processed: 1
gpg:               imported: 1
$ gpg --check-sigs --fingerprint 2D230C5F
pub   1024D/2D230C5F 2006-01-03 [expires: 2007-02-07]
      Key fingerprint = 0847 50FC 01A6 D388 A643  D869 0109 0831 2D23 0C5F
uid   Debian Archive Automatic Signing Key (2006) <ftpmaster@debian.org>
sig!3        2D230C5F 2006-01-03  Debian Archive Automatic Signing Key
                                  (2006) <ftpmaster@debian.org>
sig!         2A4E3EAA 2006-01-03  Anthony Towns <aj@azure.humbug.org.au>
sig!         4F368D5D 2006-01-03  Debian Archive Automatic Signing Key
                                  (2005) <ftpmaster@debian.org>
sig!         29982E5A 2006-01-04  Steve Langasek <vorlon@dodds.net>
sig!         FD6645AB 2006-01-04  Ryan Murray <rmurray@cyberhqz.com>
sig!         AB2A91F5 2006-01-04  James Troup <james@nocrew.org>

and then http://www.debian.org/doc/manuals/securing-debian-howto/ch7.en.html#s-deb-pack-sign from your key (or a key you trust) to at least one of the keys used to sign the archive key. If you are sufficiently paranoid you will tell apt to trust the key only if you find an acceptable path:

$ gpg --export -a 2D230C5F | sudo apt-key add -
Ok

Note that the key is signed with the previous archive key, so theoretically you can just build on your previous trust.

As mentioned above, the Debian archive signing key is changed each year, in January. Since secure apt is young, we don't have a great deal of experience with changing the key and there are still rough spots.

In January 2006, a new key for 2006 was made and the Release file began to be signed by it, but to try to avoid breaking systems that had the old 2005 key, the Release file was signed by that as well. The intent was that apt would accept one signature or the other depending on the key it had, but apt turned out to be buggy and refused to trust the file unless it had both keys and was able to check both signatures. This was fixed in apt version 0.6.43.1. There was also confusion about how the key was distributed to users who already had systems using secure apt; initially it was uploaded to the web site with no announcement and no real way to verify it and users were forced to download it by hand.

In January 2006, a new key for 2006 was made and the Release file began to be signed by it, but to try to avoid breaking systems that had the old 2005 key, the Release file was signed by that as well. In order to prevent confusion on the best distribution mechanism for users who already have systems using secure apt, the debian-archive-keyring package was introduced, which manages apt keyring updates.

One not so obvious problem is that if your clock is very far off, secure apt will not work. If it's set to a date in the past, such as 1999, apt will fail with an unhelpful message such as this:

W: GPG error: http://archive.progeny.com sid Release: Unknown error executing gpg

Although apt-key list will make the problem plain:

gpg: key 2D230C5F was created 192324901 seconds in the future (time warp or clock problem)
gpg: key 2D230C5F was created 192324901 seconds in the future (time warp or clock problem)
pub   1024D/2D230C5F 2006-01-03
uid                  Debian Archive Automatic Signing Key (2006) <ftpmaster@debian.org>

If it's set to a date too far in the future, apt will treat the keys as expired.

Another problem you may encouter if using testing or unstable is that if you have not run apt-get update lately and apt-get install a package, apt might complain that it cannot be authenticated (why does it do this?). apt-get update will fix this.

Caso você queira adicionar os novos recursos de checagem de segurança e não queira rodar a versão experimental do apt (embora nõs realmente apreciemos o teste dele) você pode usar o script abaixo, fornecido por Anthony Towns. Este script pode automaticamente fazer algumas novas checagens de segurança para permitir ao usuário certificar-se que o software que está baixando corresponde aquele distribuído pelo Debian. Isto é para desenvolvedores Debian usarem em sistemas sem a funcionalidade de uploading dos sistemas tradicionais, ou mirrors que tem quase tudo mas não como o Debian, ou mirrors que fornecem dados da versão unstable sem conhecimento dos problemas de segurança.

Este código, renomeado como apt-check-sigs, deve ser usado da seguinte maneira:

# apt-get update
# apt-check-sigs
(...resultados...)
# apt-get dist-upgrade

Primeiro você precisa:

Este é o código de exemplo do apt-check-sigs, a última versão pode ser conseguida de http://people.debian.org/~ajt/apt-check-sigs. Este código atualmente está em beta, para mais informações leia http://lists.debian.org/debian-devel/2002/debian-devel-200207/msg00421.html.

#!/bin/bash

# Copyright (c) 2001 Anthony Towns <ajt@debian.org>
#
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.

rm -rf /tmp/apt-release-check
mkdir /tmp/apt-release-check || exit 1
cd /tmp/apt-release-check

 />OK
 />MISSING
 />NOCHECK
 />BAD

arch=`dpkg --print-installation-architecture`

am_root () {
        [ `id -u` -eq 0 ]
}

get_md5sumsize () {
        cat "$1" | awk '/^MD5Sum:/,/^SHA1:/' | 
          MYARG="$2" perl -ne '@f = split /\s+/; if ($f[3] eq $ENV{"MYARG"}) { 
print "$f[1] $f[2]\n"; exit(0); }'
}

checkit () {
        local FILE="$1"
        local LOOKUP="$2"

        Y="`get_md5sumsize Release "$LOOKUP"`"
        Y="`echo "$Y" | sed 's/^ *//;s/  */ /g'`"

        if [ ! -e "/var/lib/apt/lists/$FILE" ]; then
                if [ "$Y" = "" ]; then
                        # No file, but not needed anyway
                        echo "OK"
                        return
                fi
                echo "$FILE" >>MISSING
                echo "MISSING $Y"
                return
        fi
        if [ "$Y" = "" ]; then
                echo "$FILE" >>NOCHECK
                echo "NOCHECK"
                return
        fi
        X="`md5sum < /var/lib/apt/lists/$FILE | cut -d\  -f1` `wc -c < /var/lib
/apt/lists/$FILE`"
        X="`echo "$X" | sed 's/^ *//;s/  */ /g'`"
        if [ "$X" != "$Y" ]; then
                echo "$FILE" >>BAD
                echo "BAD"
                return
        fi
        echo "$FILE" >>OK
        echo "OK"
}

echo
echo "Checking sources in /etc/apt/sources.list:"
echo "~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~"
echo
(echo "You should take care to ensure that the distributions you're downloading
"
echo "are the ones you think you are downloading, and that they are as up to"
echo "date as you would expect (testing and unstable should be no more than"
echo "two or three days out of date, stable-updates no more than a few weeks"
echo "or a month)."
) | fmt
echo

cat /etc/apt/sources.list | 
  sed 's/^ *//' | grep '^[^#]' |
  while read ty url dist comps; do
        if [ "${url%%:*}" = "http" -o "${url%%:*}" = "ftp" ]; then
                baseurl="${url#*://}"
        else
                continue
        fi

        echo "Source: ${ty} ${url} ${dist} ${comps}"

        rm -f Release Release.gpg
        lynx -reload -dump "${url}/dists/${dist}/Release" >/dev/null 2>&1
        wget -q -O Release "${url}/dists/${dist}/Release"

        if ! grep -q '^' Release; then
                echo "  * NO TOP-LEVEL Release FILE"
                >Release
        else
                origline=`sed -n 's/^Origin: *//p' Release | head -1`
                lablline=`sed -n 's/^Label: *//p' Release | head -1`
                suitline=`sed -n 's/^Suite: *//p' Release | head -1`
                codeline=`sed -n 's/^Codename: *//p' Release | head -1`
                dateline=`grep "^Date:" Release | head -1`
                dscrline=`grep "^Description:" Release | head -1`
                echo "  o Origin: $origline/$lablline"
                echo "  o Suite: $suitline/$codeline"
                echo "  o $dateline"
                echo "  o $dscrline"

                if [ "${dist%%/*}" != "$suitline" -a "${dist%%/*}" != "$codeline" ]; then
                        echo "  * WARNING: asked for $dist, got $suitline/$codeline"
                fi

                lynx -reload -dump "${url}/dists/${dist}/Release.gpg" >/dev/null 2>&1
                wget -q -O Release.gpg "${url}/dists/${dist}/Release.gpg"

                gpgv --status-fd 3 Release.gpg Release 3>&1 >/dev/null 2>&1 | sed -n "s/^\[GNUPG:\] //p" | (okay=0; err=""; while read gpgcode rest; do
                        if [ "$gpgcode" = "GOODSIG" ]; then
                            if [ "$err" != "" ]; then
                                echo "  * Signed by ${err# } key: ${rest#* }"
                            else
                                echo "  o Signed by: ${rest#* }"
                                okay=1
                            fi
                            err=""
                        elif [ "$gpgcode" = "BADSIG" ]; then
                            echo "  * BAD SIGNATURE BY: ${rest#* }"
                            err=""
                        elif [ "$gpgcode" = "ERRSIG" ]; then
                            echo "  * COULDN'T CHECK SIGNATURE BY KEYID: ${rest %% *}"
                            err=""
                        elif [ "$gpgcode" = "SIGREVOKED" ]; then
                            err="$err REVOKED"
                        elif [ "$gpgcode" = "SIGEXPIRED" ]; then
                            err="$err EXPIRED"
                        fi
                    done
                    if [ "$okay" != 1 ]; then
                        echo "  * NO VALID SIGNATURE"
                        >Release
                    fi)
        fi
        okaycomps=""
        for comp in $comps; do
                if [ "$ty" = "deb" ]; then
                        X=$(checkit "`echo "${baseurl}/dists/${dist}/${comp}/binary-${arch}/Release" | sed 's,//*,_,g'`" "${comp}/binary-${arch}/Release")
                        Y=$(checkit "`echo "${baseurl}/dists/${dist}/${comp}/binary-${arch}/Packages" | sed 's,//*,_,g'`" "${comp}/binary-${arch}/Packages")
                        if [ "$X $Y" = "OK OK" ]; then
                                okaycomps="$okaycomps $comp"
                        else
                                echo "  * PROBLEMS WITH $comp ($X, $Y)"
                        fi
                elif [ "$ty" = "deb-src" ]; then
                        X=$(checkit "`echo "${baseurl}/dists/${dist}/${comp}/source/Release" | sed 's,//*,_,g'`" "${comp}/source/Release")
                        Y=$(checkit "`echo "${baseurl}/dists/${dist}/${comp}/source/Sources" | sed 's,//*,_,g'`" "${comp}/source/Sources")
                        if [ "$X $Y" = "OK OK" ]; then
                                okaycomps="$okaycomps $comp"
                        else
                                echo "  * PROBLEMS WITH component $comp ($X, $Y)"
                        fi
                fi
        done
        [ "$okaycomps" = "" ] || echo "  o Okay:$okaycomps"
        echo
  done

echo "Results"
echo "~~~~~~~"
echo

allokay=true

cd /tmp/apt-release-check
diff <(cat BAD MISSING NOCHECK OK | sort) <(cd /var/lib/apt/lists && find . -type f -maxdepth 1 | sed 's,^\./,,g' | grep '_' | sort) | sed -n 's/^> //p' >UNVALIDATED

cd /tmp/apt-release-check
if grep -q ^ UNVALIDATED; then
    allokay=false
    (echo "The following files in /var/lib/apt/lists have not been validated."
    echo "This could turn out to be a harmless indication that this script"
    echo "is buggy or out of date, or it could let trojaned packages get onto"
    echo "your system."
    ) | fmt
    echo
    sed 's/^/    /' < UNVALIDATED
    echo
fi

if grep -q ^ BAD; then
    allokay=false
    (echo "The contents of the following files in /var/lib/apt/lists does not"
    echo "match what was expected. This may mean these sources are out of date,"
    echo "that the archive is having problems, or that someone is actively"
    echo "using your mirror to distribute trojans."
    if am_root; then 
        echo "The files have been renamed to have the extension .FAILED and"
        echo "will be ignored by apt."
        cat BAD | while read a; do
            mv /var/lib/apt/lists/$a /var/lib/apt/lists/${a}.FAILED
        done
    fi) | fmt
    echo
    sed 's/^/    /' < BAD
    echo
fi

if grep -q ^ MISSING; then
    allokay=false
    (echo "The following files from /var/lib/apt/lists were missing. This"
    echo "may cause you to miss out on updates to some vulnerable packages."
    ) | fmt
    echo
    sed 's/^/    /' < MISSING
    echo
fi

if grep -q ^ NOCHECK; then
    allokay=false
    (echo "The contents of the following files in /var/lib/apt/lists could not"
    echo "be validated due to the lack of a signed Release file, or the lack"
    echo "of an appropriate entry in a signed Release file. This probably"
    echo "means that the maintainers of these sources are slack, but may mean"
    echo "these sources are being actively used to distribute trojans."
    if am_root; then 
        echo "The files have been renamed to have the extension .FAILED and"
        echo "will be ignored by apt."
        cat NOCHECK | while read a; do
            mv /var/lib/apt/lists/$a /var/lib/apt/lists/${a}.FAILED
        done
    fi) | fmt
    echo
    sed 's/^/    /' < NOCHECK
    echo
fi

if $allokay; then
    echo 'Everything seems okay!'
    echo
fi

rm -rf /tmp/apt-release-check

Você pode precisar aplicar o seguinte patch para sid uma vez que md5sum adiciona um '-' após o sum quando a entrada é stdin:

@@ -37,7 +37,7 @@
        local LOOKUP="$2"

        Y="`get_md5sumsize Release "$LOOKUP"`"
-       Y="`echo "$Y" | sed 's/^ *//;s/  */ /g'`"
+       Y="`echo "$Y" | sed 's/-//;s/^ *//;s/  */ /g'`"

        if [ ! -e "/var/lib/apt/lists/$FILE" ]; then
                if [ "$Y" = "" ]; then
@@ -55,7 +55,7 @@
                return
        fi
        X="`md5sum < /var/lib/apt/lists/$FILE` `wc -c < /var/lib/apt/lists/$FILE`"
-       X="`echo "$X" | sed 's/^ *//;s/  */ /g'`"
+       X="`echo "$X" | sed 's/-//;s/^ *//;s/  */ /g'`"
        if [ "$X" != "$Y" ]; then
                echo "$FILE" >>BAD
                echo "BAD"