1. Introduction to GRUB

1.1 Overview

Briefly, a boot loader is the first software program that runs when a computer starts. It is responsible for loading and transferring control to an operating system kernel software (such as Linux or GNU Mach). The kernel, in turn, initializes the rest of the operating system (e.g. a GNU system).

GNU GRUB is a very powerful boot loader, which can load a wide variety of free operating systems, as well as proprietary operating systems with chain-loading(1). GRUB is designed to address the complexity of booting a personal computer; both the program and this manual are tightly bound to that computer platform, although porting to other platforms may be addressed in the future.

One of the important features in GRUB is flexibility; GRUB understands filesystems and kernel executable formats, so you can load an arbitrary operating system the way you like, without recording the physical position of your kernel on the disk. Thus you can load the kernel just by specifying its file name and the drive and partition where the kernel resides.

When booting with GRUB, you can use either a command-line interface (see section The flexible command-line interface), or a menu interface (see section The simple menu interface). Using the command-line interface, you type the drive specification and file name of the kernel manually. In the menu interface, you just select an OS using the arrow keys. The menu is based on a configuration file which you prepare beforehand (see section Configuration). While in the menu, you can switch to the command-line mode, and vice-versa. You can even edit menu entries before using them.

In the following chapters, you will learn how to specify a drive, a partition, and a file name (see section Naming convention) to GRUB, how to install GRUB on your drive (see section Installation), and how to boot your OSes (see section Booting), step by step.

Besides the GRUB boot loader itself, there is a grub shell grub (see section Invoking the grub shell) which can be run when you are in your operating system. It emulates the boot loader and can be used for installing the boot loader.

1.2 History of GRUB

GRUB originated in 1995 when Erich Boleyn was trying to boot the GNU Hurd with the University of Utah’s Mach 4 microkernel (now known as GNU Mach). Erich and Brian Ford designed the Multiboot Specification (see Multiboot Specification: (multiboot)Top section ‘Motivation’ in The Multiboot Specification), because they were determined not to add to the large number of mutually-incompatible PC boot methods.

Erich then began modifying the FreeBSD boot loader so that it would understand Multiboot. He soon realized that it would be a lot easier to write his own boot loader from scratch than to keep working on the FreeBSD boot loader, and so GRUB was born.

Erich added many features to GRUB, but other priorities prevented him from keeping up with the demands of its quickly-expanding user base. In 1999, Gordon Matzigkeit and Yoshinori K. Okuji adopted GRUB as an official GNU package, and opened its development by making the latest sources available via anonymous CVS. See section How to obtain and build GRUB, for more information.

1.3 GRUB features

The primary requirement for GRUB is that it be compliant with the Multiboot Specification, which is described in Multiboot Specification: (multiboot)Top section ‘Motivation’ in The Multiboot Specification.

The other goals, listed in approximate order of importance, are:

• Basic functions must be straightforward for end-users.
• Rich functionality to support kernel experts and designers.
• Backward compatibility for booting FreeBSD, NetBSD, OpenBSD, and Linux. Proprietary kernels (such as DOS, Windows NT, and OS/2) are supported via a chain-loading function.

Except for specific compatibility modes (chain-loading and the Linux piggyback format), all kernels will be started in much the same state as in the Multiboot Specification. Only kernels loaded at 1 megabyte or above are presently supported. Any attempt to load below that boundary will simply result in immediate failure and an error message reporting the problem.

In addition to the requirements above, GRUB has the following features (note that the Multiboot Specification doesn’t require all the features that GRUB supports):

Recognize multiple executable formats

Support many of the a.out variants plus ELF. Symbol tables are also loaded.

Support non-Multiboot kernels

Support many of the various free 32-bit kernels that lack Multiboot compliance (primarily FreeBSD, NetBSD, OpenBSD, and Linux). Chain-loading of other boot loaders is also supported.

Load multiples modules

Fully support the Multiboot feature of loading multiple modules.

Load a configuration file

Support a human-readable text configuration file with preset boot commands. You can also load another configuration file dynamically and embed a preset configuration file in a GRUB image file. The list of commands (see section The list of available commands) are a superset of those supported on the command-line. An example configuration file is provided in Configuration.

Provide a menu interface

A menu interface listing preset boot commands, with a programmable timeout, is available. There is no fixed limit on the number of boot entries, and the current implementation has space for several hundred.

Have a flexible command-line interface

A fairly flexible command-line interface, accessible from the menu, is available to edit any preset commands, or write a new boot command set from scratch. If no configuration file is present, GRUB drops to the command-line.

The list of commands (see section The list of available commands) are a subset of those supported for configuration files. Editing commands closely resembles the Bash command-line (see Bash: (features)Command Line Editing section ‘Command Line Editing’ in Bash Features), with <TAB>-completion of commands, devices, partitions, and files in a directory depending on context.

Support multiple filesystem types

Support multiple filesystem types transparently, plus a useful explicit blocklist notation. The currently supported filesystem types are BSD FFS, DOS FAT16 and FAT32, Minix fs, Linux ext2fs, ReiserFS, JFS, XFS, and VSTa fs. See section Filesystem syntax and semantics, for more information.

Support automatic decompression

Can decompress files which were compressed by gzip. This function is both automatic and transparent to the user (i.e. all functions operate upon the uncompressed contents of the specified files). This greatly reduces a file size and loading time, a particularly great benefit for floppies.(2)

It is conceivable that some kernel modules should be loaded in a compressed state, so a different module-loading command can be specified to avoid uncompressing the modules.

Access data on any installed device

Support reading data from any or all floppies or hard disk(s) recognized by the BIOS, independent of the setting of the root device.

Be independent of drive geometry translations

Unlike many other boot loaders, GRUB makes the particular drive translation irrelevant. A drive installed and running with one translation may be converted to another translation without any adverse effects or changes in GRUB’s configuration.

Detect all installed RAM

GRUB can generally find all the installed RAM on a PC-compatible machine. It uses an advanced BIOS query technique for finding all memory regions. As described on the Multiboot Specification (see Multiboot Specification: (multiboot)Top section ‘Motivation’ in The Multiboot Specification), not all kernels make use of this information, but GRUB provides it for those who do.

Support Logical Block Address mode

In traditional disk calls (called CHS mode), there is a geometry translation problem, that is, the BIOS cannot access over 1024 cylinders, so the accessible space is limited to at least 508 MB and to at most 8GB. GRUB can’t universally solve this problem, as there is no standard interface used in all machines. However, several newer machines have the new interface, Logical Block Address (LBA) mode. GRUB automatically detects if LBA mode is available and uses it if available. In LBA mode, GRUB can access the entire disk.

Support network booting

GRUB is basically a disk-based boot loader but also has network support. You can load OS images from a network by using the TFTP protocol.

Support remote terminals

To support computers with no console, GRUB provides remote terminal support, so that you can control GRUB from a remote host. Only serial terminal support is implemented at the moment.

1.4 The role of a boot loader

The following is a quotation from Gordon Matzigkeit, a GRUB fanatic:

Some people like to acknowledge both the operating system and kernel when they talk about their computers, so they might say they use “GNU/Linux” or “GNU/Hurd”. Other people seem to think that the kernel is the most important part of the system, so they like to call their GNU operating systems “Linux systems.”

I, personally, believe that this is a grave injustice, because the boot loader is the most important software of all. I used to refer to the above systems as either “LILO”(3) or “GRUB” systems.

Unfortunately, nobody ever understood what I was talking about; now I just use the word “GNU” as a pseudonym for GRUB.

So, if you ever hear people talking about their alleged “GNU” systems, remember that they are actually paying homage to the best boot loader around… GRUB!

We, the GRUB maintainers, do not (usually) encourage Gordon’s level of fanaticism, but it helps to remember that boot loaders deserve recognition. We hope that you enjoy using GNU GRUB as much as we did writing it.

This document was generated on January 3, 2022 using texi2html 1.82.